net/sfc: fix multicast address list copy memory leak
[dpdk.git] / drivers / net / dpaa2 / dpaa2_ethdev.c
index a982242..25f1a45 100644 (file)
@@ -25,6 +25,7 @@
 #include <dpaa2_hw_dpio.h>
 #include <mc/fsl_dpmng.h>
 #include "dpaa2_ethdev.h"
+#include <fsl_qbman_debug.h>
 
 struct rte_dpaa2_xstats_name_off {
        char name[RTE_ETH_XSTATS_NAME_SIZE];
@@ -320,8 +321,8 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
 
        if (eth_conf->rxmode.jumbo_frame == 1) {
                if (eth_conf->rxmode.max_rx_pkt_len <= DPAA2_MAX_RX_PKT_LEN) {
-                       ret = dpaa2_dev_mtu_set(dev,
-                                       eth_conf->rxmode.max_rx_pkt_len);
+                       ret = dpni_set_max_frame_length(dpni, CMD_PRI_LOW,
+                               priv->token, eth_conf->rxmode.max_rx_pkt_len);
                        if (ret) {
                                PMD_INIT_LOG(ERR,
                                             "unable to set mtu. check config\n");
@@ -392,7 +393,6 @@ dpaa2_dev_rx_queue_setup(struct rte_eth_dev *dev,
 {
        struct dpaa2_dev_priv *priv = dev->data->dev_private;
        struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
-       struct mc_soc_version mc_plat_info = {0};
        struct dpaa2_queue *dpaa2_q;
        struct dpni_queue cfg;
        uint8_t options = 0;
@@ -424,18 +424,20 @@ dpaa2_dev_rx_queue_setup(struct rte_eth_dev *dev,
 
        /*if ls2088 or rev2 device, enable the stashing */
 
-       if (mc_get_soc_version(dpni, CMD_PRI_LOW, &mc_plat_info))
-               PMD_INIT_LOG(ERR, "\tmc_get_soc_version failed\n");
-
-       if ((mc_plat_info.svr & 0xffff0000) != SVR_LS2080A) {
+       if ((dpaa2_svr_family & 0xffff0000) != SVR_LS2080A) {
                options |= DPNI_QUEUE_OPT_FLC;
                cfg.flc.stash_control = true;
                cfg.flc.value &= 0xFFFFFFFFFFFFFFC0;
                /* 00 00 00 - last 6 bit represent annotation, context stashing,
-                * data stashing setting 01 01 00 (0x14) to enable
-                * 1 line data, 1 line annotation
+                * data stashing setting 01 01 00 (0x14)
+                * (in following order ->DS AS CS)
+                * to enable 1 line data, 1 line annotation.
+                * For LX2, this setting should be 01 00 00 (0x10)
                 */
-               cfg.flc.value |= 0x14;
+               if ((dpaa2_svr_family & 0xffff0000) == SVR_LX2160A)
+                       cfg.flc.value |= 0x10;
+               else
+                       cfg.flc.value |= 0x14;
        }
        ret = dpni_set_queue(dpni, CMD_PRI_LOW, priv->token, DPNI_QUEUE_RX,
                             dpaa2_q->tc_index, flow_id, options, &cfg);
@@ -568,6 +570,37 @@ dpaa2_dev_tx_queue_release(void *q __rte_unused)
        PMD_INIT_FUNC_TRACE();
 }
 
+static uint32_t
+dpaa2_dev_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)
+{
+       int32_t ret;
+       struct dpaa2_dev_priv *priv = dev->data->dev_private;
+       struct dpaa2_queue *dpaa2_q;
+       struct qbman_swp *swp;
+       struct qbman_fq_query_np_rslt state;
+       uint32_t frame_cnt = 0;
+
+       PMD_INIT_FUNC_TRACE();
+
+       if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
+               ret = dpaa2_affine_qbman_swp();
+               if (ret) {
+                       RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+                       return -EINVAL;
+               }
+       }
+       swp = DPAA2_PER_LCORE_PORTAL;
+
+       dpaa2_q = (struct dpaa2_queue *)priv->rx_vq[rx_queue_id];
+
+       if (qbman_fq_query_state(swp, dpaa2_q->fqid, &state) == 0) {
+               frame_cnt = qbman_fq_state_frame_count(&state);
+               RTE_LOG(DEBUG, PMD, "RX frame count for q(%d) is %u\n",
+                       rx_queue_id, frame_cnt);
+       }
+       return frame_cnt;
+}
+
 static const uint32_t *
 dpaa2_supported_ptypes_get(struct rte_eth_dev *dev)
 {
@@ -941,7 +974,8 @@ dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
        int ret;
        struct dpaa2_dev_priv *priv = dev->data->dev_private;
        struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
-       uint32_t frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+       uint32_t frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN
+                               + VLAN_TAG_SIZE;
 
        PMD_INIT_FUNC_TRACE();
 
@@ -959,11 +993,13 @@ dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
        else
                dev->data->dev_conf.rxmode.jumbo_frame = 0;
 
+       dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+
        /* Set the Max Rx frame length as 'mtu' +
         * Maximum Ethernet header length
         */
        ret = dpni_set_max_frame_length(dpni, CMD_PRI_LOW, priv->token,
-                                       mtu + ETH_VLAN_HLEN);
+                                       frame_size);
        if (ret) {
                PMD_DRV_LOG(ERR, "setting the max frame length failed");
                return -1;
@@ -1710,6 +1746,7 @@ static struct eth_dev_ops dpaa2_ethdev_ops = {
        .rx_queue_release  = dpaa2_dev_rx_queue_release,
        .tx_queue_setup    = dpaa2_dev_tx_queue_setup,
        .tx_queue_release  = dpaa2_dev_tx_queue_release,
+       .rx_queue_count       = dpaa2_dev_rx_queue_count,
        .flow_ctrl_get        = dpaa2_flow_ctrl_get,
        .flow_ctrl_set        = dpaa2_flow_ctrl_set,
        .mac_addr_add         = dpaa2_dev_add_mac_addr,