-/*-
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * BSD LICENSE
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
*
* Copyright 2013-2016 Freescale Semiconductor Inc.
- * Copyright (c) 2016 NXP.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of the above-listed copyright holders nor the
- * names of any contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * GPL LICENSE SUMMARY
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
+ * Copyright 2016-2019 NXP
*
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __FSL_DPNI_H
#define __FSL_DPNI_H
#include <fsl_dpkg.h>
+#include <fsl_dpopr.h>
struct fsl_mc_io;
#define DPNI_OPT_NO_FS 0x000020
/**
- * dpni_open() - Open a control session for the specified object
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @dpni_id: DPNI unique ID
- * @token: Returned token; use in subsequent API calls
- *
- * This function can be used to open a control session for an
- * already created object; an object may have been declared in
- * the DPL or by calling the dpni_create() function.
- * This function returns a unique authentication token,
- * associated with the specific object ID and the specific MC
- * portal; this token must be used in all subsequent commands for
- * this specific object.
- *
- * Return: '0' on Success; Error code otherwise.
+ * Enable the Order Restoration support
*/
-int dpni_open(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- int dpni_id,
- uint16_t *token);
+#define DPNI_OPT_HAS_OPR 0x000040
/**
- * dpni_close() - Close the control session of the object
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- *
- * After this function is called, no further operations are
- * allowed on the object without opening a new control session.
- *
- * Return: '0' on Success; Error code otherwise.
+ * Order Point Records are shared for the entire TC
*/
-int dpni_close(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token);
+#define DPNI_OPT_OPR_PER_TC 0x000080
+/**
+ * All Tx traffic classes will use a single sender (ignore num_queueus for tx)
+ */
+#define DPNI_OPT_SINGLE_SENDER 0x000100
+/**
+ * Define a custom number of congestion groups
+ */
+#define DPNI_OPT_CUSTOM_CG 0x000200
+
+
+/**
+ * Software sequence maximum layout size
+ */
+#define DPNI_SW_SEQUENCE_LAYOUT_SIZE 33
+
+int dpni_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpni_id,
+ uint16_t *token);
+
+int dpni_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
/**
* struct dpni_cfg - Structure representing DPNI configuration
- * @mac_addr: Primary MAC address
- * @adv: Advanced parameters; default is all zeros;
- * use this structure to change default settings
+ * @options: Any combination of the following options:
+ * DPNI_OPT_TX_FRM_RELEASE
+ * DPNI_OPT_NO_MAC_FILTER
+ * DPNI_OPT_HAS_POLICING
+ * DPNI_OPT_SHARED_CONGESTION
+ * DPNI_OPT_HAS_KEY_MASKING
+ * DPNI_OPT_NO_FS
+ * DPNI_OPT_SINGLE_SENDER
+ * @fs_entries: Number of entries in the flow steering table.
+ * This table is used to select the ingress queue for
+ * ingress traffic, targeting a GPP core or another.
+ * In addition it can be used to discard traffic that
+ * matches the set rule. It is either an exact match table
+ * or a TCAM table, depending on DPNI_OPT_ HAS_KEY_MASKING
+ * bit in OPTIONS field. This field is ignored if
+ * DPNI_OPT_NO_FS bit is set in OPTIONS field. Otherwise,
+ * value 0 defaults to 64. Maximum supported value is 1024.
+ * Note that the total number of entries is limited on the
+ * SoC to as low as 512 entries if TCAM is used.
+ * @vlan_filter_entries: Number of entries in the VLAN address filtering
+ * table. This is an exact match table used to filter
+ * ingress traffic based on VLAN IDs. Value 0 disables VLAN
+ * filtering. Maximum supported value is 16.
+ * @mac_filter_entries: Number of entries in the MAC address filtering
+ * table. This is an exact match table and allows both
+ * unicast and multicast entries. The primary MAC address
+ * of the network interface is not part of this table,
+ * this contains only entries in addition to it. This
+ * field is ignored if DPNI_OPT_ NO_MAC_FILTER is set in
+ * OPTIONS field. Otherwise, value 0 defaults to 80.
+ * Maximum supported value is 80.
+ * @num_queues: Number of Tx and Rx queues used for traffic
+ * distribution. This is orthogonal to QoS and is only
+ * used to distribute traffic to multiple GPP cores.
+ * This configuration affects the number of Tx queues
+ * (logical FQs, all associated with a single CEETM queue),
+ * Rx queues and Tx confirmation queues, if applicable.
+ * Value 0 defaults to one queue. Maximum supported value
+ * is 8.
+ * @num_tcs: Number of traffic classes (TCs), reserved for the DPNI.
+ * TCs can have different priority levels for the purpose
+ * of Tx scheduling (see DPNI_SET_TX_PRIORITIES), different
+ * BPs (DPNI_ SET_POOLS), policers. There are dedicated QM
+ * queues for traffic classes (including class queues on
+ * Tx). Value 0 defaults to one TC. Maximum supported value
+ * is 16. There are maximum 16 TCs for Tx and 8 TCs for Rx.
+ * When num_tcs>8 Tx will use this value but Rx will have
+ * only 8 traffic classes.
+ * @num_rx_tcs: if set to other value than zero represents number
+ * of TCs used for Rx. Maximum value is 8. If set to zero the
+ * number of Rx TCs will be initialized with the value provided
+ * in num_tcs parameter.
+ * @qos_entries: Number of entries in the QoS classification table. This
+ * table is used to select the TC for ingress traffic. It
+ * is either an exact match or a TCAM table, depending on
+ * DPNI_OPT_ HAS_KEY_MASKING bit in OPTIONS field. This
+ * field is ignored if the DPNI has a single TC. Otherwise,
+ * a value of 0 defaults to 64. Maximum supported value
+ * is 64.
*/
struct dpni_cfg {
- /**
- * @options: Any combination of the following options:
- * DPNI_OPT_TX_FRM_RELEASE
- * DPNI_OPT_NO_MAC_FILTER
- * DPNI_OPT_HAS_POLICING
- * DPNI_OPT_SHARED_CONGESTION
- * DPNI_OPT_HAS_KEY_MASKING
- * DPNI_OPT_NO_FS
- * @fs_entries: Number of entries in the flow steering table.
- * This table is used to select the ingress queue for
- * ingress traffic, targeting a GPP core or another.
- * In addition it can be used to discard traffic that
- * matches the set rule. It is either an exact match table
- * or a TCAM table, depending on DPNI_OPT_ HAS_KEY_MASKING
- * bit in OPTIONS field. This field is ignored if
- * DPNI_OPT_NO_FS bit is set in OPTIONS field. Otherwise,
- * value 0 defaults to 64. Maximum supported value is 1024.
- * Note that the total number of entries is limited on the
- * SoC to as low as 512 entries if TCAM is used.
- * @vlan_filter_entries: Number of entries in the VLAN address filtering
- * table. This is an exact match table used to filter
- * ingress traffic based on VLAN IDs. Value 0 disables VLAN
- * filtering. Maximum supported value is 16.
- * @mac_filter_entries: Number of entries in the MAC address filtering
- * table. This is an exact match table and allows both
- * unicast and multicast entries. The primary MAC address
- * of the network interface is not part of this table,
- * this contains only entries in addition to it. This
- * field is ignored if DPNI_OPT_ NO_MAC_FILTER is set in
- * OPTIONS field. Otherwise, value 0 defaults to 80.
- * Maximum supported value is 80.
- * @num_queues: Number of Tx and Rx queues used for traffic
- * distribution. This is orthogonal to QoS and is only
- * used to distribute traffic to multiple GPP cores.
- * This configuration affects the number of Tx queues
- * (logical FQs, all associated with a single CEETM queue),
- * Rx queues and Tx confirmation queues, if applicable.
- * Value 0 defaults to one queue. Maximum supported value
- * is 8.
- * @num_tcs: Number of traffic classes (TCs), reserved for the DPNI.
- * TCs can have different priority levels for the purpose
- * of Tx scheduling (see DPNI_SET_TX_SELECTION), different
- * BPs (DPNI_ SET_POOLS), policers. There are dedicated QM
- * queues for traffic classes (including class queues on
- * Tx). Value 0 defaults to one TC. Maximum supported value
- * is 8.
- * @qos_entries: Number of entries in the QoS classification table. This
- * table is used to select the TC for ingress traffic. It
- * is either an exact match or a TCAM table, depending on
- * DPNI_OPT_ HAS_KEY_MASKING bit in OPTIONS field. This
- * field is ignored if the DPNI has a single TC. Otherwise,
- * a value of 0 defaults to 64. Maximum supported value
- * is 64.
- */
uint32_t options;
uint16_t fs_entries;
uint8_t vlan_filter_entries;
uint8_t mac_filter_entries;
uint8_t num_queues;
uint8_t num_tcs;
+ uint8_t num_rx_tcs;
uint8_t qos_entries;
+ uint8_t num_cgs;
};
-/**
- * dpni_create() - Create the DPNI object
- * @mc_io: Pointer to MC portal's I/O object
- * @dprc_token: Parent container token; '0' for default container
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @cfg: Configuration structure
- * @obj_id: returned object id
- *
- * Create the DPNI object, allocate required resources and
- * perform required initialization.
- *
- * The object can be created either by declaring it in the
- * DPL file, or by calling this function.
- *
- * The function accepts an authentication token of a parent
- * container that this object should be assigned to. The token
- * can be '0' so the object will be assigned to the default container.
- * The newly created object can be opened with the returned
- * object id and using the container's associated tokens and MC portals.
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_create(struct fsl_mc_io *mc_io,
- uint16_t dprc_token,
- uint32_t cmd_flags,
- const struct dpni_cfg *cfg,
- uint32_t *obj_id);
+int dpni_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpni_cfg *cfg,
+ uint32_t *obj_id);
-/**
- * dpni_destroy() - Destroy the DPNI object and release all its resources.
- * @mc_io: Pointer to MC portal's I/O object
- * @dprc_token: Parent container token; '0' for default container
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @object_id: The object id; it must be a valid id within the container that
- * created this object;
- *
- * The function accepts the authentication token of the parent container that
- * created the object (not the one that currently owns the object). The object
- * is searched within parent using the provided 'object_id'.
- * All tokens to the object must be closed before calling destroy.
- *
- * Return: '0' on Success; error code otherwise.
- */
-int dpni_destroy(struct fsl_mc_io *mc_io,
- uint16_t dprc_token,
- uint32_t cmd_flags,
- uint32_t object_id);
+int dpni_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id);
/**
* struct dpni_pools_cfg - Structure representing buffer pools configuration
- * @num_dpbp: Number of DPBPs
- * @pools: Array of buffer pools parameters; The number of valid entries
- * must match 'num_dpbp' value
+ * @num_dpbp: Number of DPBPs
+ * @pool_options: Buffer assignment options
+ * This field is a combination of DPNI_POOL_ASSOC_flags
+ * @pools: Array of buffer pools parameters; The number of valid entries
+ * must match 'num_dpbp' value
+ * @pools.dpbp_id: DPBP object ID
+ * @pools.priority: Priority mask that indicates TC's used with this buffer.
+ * I set to 0x00 MC will assume value 0xff.
+ * @pools.buffer_size: Buffer size
+ * @pools.backup_pool: Backup pool
*/
+
+#define DPNI_POOL_ASSOC_QPRI 0
+#define DPNI_POOL_ASSOC_QDBIN 1
+
struct dpni_pools_cfg {
- uint8_t num_dpbp;
- /**
- * struct pools - Buffer pools parameters
- * @dpbp_id: DPBP object ID
- * @buffer_size: Buffer size
- * @backup_pool: Backup pool
- */
+ uint8_t num_dpbp;
+ uint8_t pool_options;
struct {
int dpbp_id;
+ uint8_t priority_mask;
uint16_t buffer_size;
int backup_pool;
} pools[DPNI_MAX_DPBP];
};
-/**
- * dpni_set_pools() - Set buffer pools configuration
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @cfg: Buffer pools configuration
- *
- * mandatory for DPNI operation
- * warning:Allowed only when DPNI is disabled
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_set_pools(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- const struct dpni_pools_cfg *cfg);
+int dpni_set_pools(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ const struct dpni_pools_cfg *cfg);
-/**
- * dpni_enable() - Enable the DPNI, allow sending and receiving frames.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_enable(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token);
+int dpni_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+int dpni_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+int dpni_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en);
+
+int dpni_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
/**
- * dpni_disable() - Disable the DPNI, stop sending and receiving frames.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- *
- * Return: '0' on Success; Error code otherwise.
+ * DPNI IRQ Index and Events
*/
-int dpni_disable(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token);
/**
- * dpni_is_enabled() - Check if the DPNI is enabled.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @en: Returns '1' if object is enabled; '0' otherwise
- *
- * Return: '0' on Success; Error code otherwise.
+ * IRQ index
*/
-int dpni_is_enabled(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- int *en);
-
+#define DPNI_IRQ_INDEX 0
/**
- * dpni_reset() - Reset the DPNI, returns the object to initial state.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- *
- * Return: '0' on Success; Error code otherwise.
+ * IRQ event - indicates a change in link state
*/
-int dpni_reset(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token);
+#define DPNI_IRQ_EVENT_LINK_CHANGED 0x00000001
+
+int dpni_set_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t en);
+
+int dpni_get_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t *en);
+
+int dpni_set_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t mask);
+
+int dpni_get_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *mask);
+
+int dpni_get_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *status);
+
+int dpni_clear_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t status);
/**
* struct dpni_attr - Structure representing DPNI attributes
* DPNI_OPT_HAS_KEY_MASKING
* DPNI_OPT_NO_FS
* @num_queues: Number of Tx and Rx queues used for traffic distribution.
- * @num_tcs: Number of traffic classes (TCs), reserved for the DPNI.
+ * @num_rx_tcs: Number of RX traffic classes (TCs), reserved for the DPNI.
+ * @num_tx_tcs: Number of TX traffic classes (TCs), reserved for the DPNI.
* @mac_filter_entries: Number of entries in the MAC address filtering
* table.
* @vlan_filter_entries: Number of entries in the VLAN address filtering
* variants,
* - 0x422 - WRIOP version 1.1.2, used on LS1088 and
* variants.
+ * - 0xC00 - WRIOP version 3.0.0, used on LX2160 and
+ * variants.
*/
struct dpni_attr {
uint32_t options;
uint8_t num_queues;
- uint8_t num_tcs;
+ uint8_t num_rx_tcs;
+ uint8_t num_tx_tcs;
uint8_t mac_filter_entries;
uint8_t vlan_filter_entries;
uint8_t qos_entries;
uint8_t qos_key_size;
uint8_t fs_key_size;
uint16_t wriop_version;
+ uint8_t num_cgs;
};
+int dpni_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpni_attr *attr);
+
/**
- * dpni_get_attributes() - Retrieve DPNI attributes.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @attr: Object's attributes
- *
- * Return: '0' on Success; Error code otherwise.
+ * DPNI errors
*/
-int dpni_get_attributes(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- struct dpni_attr *attr);
/**
- * DPNI errors
+ * Discard error. When set all discarded frames in wriop will be enqueued to
+ * error queue. To be used in dpni_set_errors_behavior() only if error_action
+ * parameter is set to DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE.
*/
+#define DPNI_ERROR_DISC 0x80000000
/**
* Extract out of frame header error
/**
* struct dpni_error_cfg - Structure representing DPNI errors treatment
- * @errors: Errors mask; use 'DPNI_ERROR__<X>
- * @error_action: The desired action for the errors mask
- * @set_frame_annotation: Set to '1' to mark the errors in frame annotation
- * status (FAS); relevant only for the non-discard action
+ * @errors: Errors mask; use 'DPNI_ERROR__<X>
+ * @error_action: The desired action for the errors mask
+ * @set_frame_annotation: Set to '1' to mark the errors in frame
+ * annotation status (FAS); relevant only
+ * for the non-discard action
*/
struct dpni_error_cfg {
- uint32_t errors;
- enum dpni_error_action error_action;
- int set_frame_annotation;
+ uint32_t errors;
+ enum dpni_error_action error_action;
+ int set_frame_annotation;
};
-/**
- * dpni_set_errors_behavior() - Set errors behavior
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @cfg: Errors configuration
- *
- * this function may be called numerous times with different
- * error masks
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_set_errors_behavior(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- struct dpni_error_cfg *cfg);
+int dpni_set_errors_behavior(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpni_error_cfg *cfg);
/**
* DPNI buffer layout modification options
* Select to modify the data-tail-room setting
*/
#define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040
+/**
+ * Select to modify the sw-opaque value setting
+ */
+#define DPNI_BUF_LAYOUT_OPT_SW_OPAQUE 0x00000080
/**
* struct dpni_buffer_layout - Structure representing DPNI buffer layout
- * @options: Flags representing the suggested modifications to the buffer
- * layout; Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags
- * @pass_timestamp: Pass timestamp value
- * @pass_parser_result: Pass parser results
- * @pass_frame_status: Pass frame status
- * @private_data_size: Size kept for private data (in bytes)
- * @data_align: Data alignment
- * @data_head_room: Data head room
- * @data_tail_room: Data tail room
+ * @options: Flags representing the suggested modifications to the
+ * buffer layout;
+ * Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags
+ * @pass_timestamp: Pass timestamp value
+ * @pass_parser_result: Pass parser results
+ * @pass_frame_status: Pass frame status
+ * @private_data_size: Size kept for private data (in bytes)
+ * @data_align: Data alignment
+ * @data_head_room: Data head room
+ * @data_tail_room: Data tail room
*/
struct dpni_buffer_layout {
- uint32_t options;
- int pass_timestamp;
- int pass_parser_result;
- int pass_frame_status;
- uint16_t private_data_size;
- uint16_t data_align;
- uint16_t data_head_room;
- uint16_t data_tail_room;
+ uint32_t options;
+ int pass_timestamp;
+ int pass_parser_result;
+ int pass_frame_status;
+ int pass_sw_opaque;
+ uint16_t private_data_size;
+ uint16_t data_align;
+ uint16_t data_head_room;
+ uint16_t data_tail_room;
};
/**
* @DPNI_QUEUE_TX: Tx queue
* @DPNI_QUEUE_TX_CONFIRM: Tx confirmation queue
* @DPNI_QUEUE_RX_ERR: Rx error queue
- */enum dpni_queue_type {
+ */
+enum dpni_queue_type {
DPNI_QUEUE_RX,
DPNI_QUEUE_TX,
DPNI_QUEUE_TX_CONFIRM,
DPNI_QUEUE_RX_ERR,
};
-/**
- * dpni_get_buffer_layout() - Retrieve buffer layout attributes.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @qtype: Type of queue to get the layout from
- * @layout: Returns buffer layout attributes
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_get_buffer_layout(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- enum dpni_queue_type qtype,
- struct dpni_buffer_layout *layout);
+int dpni_get_buffer_layout(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_queue_type qtype,
+ struct dpni_buffer_layout *layout);
-/**
- * dpni_set_buffer_layout() - Set buffer layout configuration.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @qtype: Type of queue to set layout on
- * @layout: Buffer layout configuration
- *
- * Return: '0' on Success; Error code otherwise.
- *
- * @warning Allowed only when DPNI is disabled
- */
-int dpni_set_buffer_layout(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- enum dpni_queue_type qtype,
+int dpni_set_buffer_layout(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_queue_type qtype,
const struct dpni_buffer_layout *layout);
/**
* @DPNI_OFF_RX_L4_CSUM: Rx L4 checksum validation
* @DPNI_OFF_TX_L3_CSUM: Tx L3 checksum generation
* @DPNI_OFF_TX_L4_CSUM: Tx L4 checksum generation
+ * @DPNI_OPT_FLCTYPE_HASH: flow context will be generated by WRIOP for AIOP or
+ * for CPU
*/
enum dpni_offload {
DPNI_OFF_RX_L3_CSUM,
DPNI_OFF_RX_L4_CSUM,
DPNI_OFF_TX_L3_CSUM,
DPNI_OFF_TX_L4_CSUM,
+ DPNI_FLCTYPE_HASH,
};
-/**
- * dpni_set_offload() - Set DPNI offload configuration.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @type: Type of DPNI offload
- * @config: Offload configuration.
- * For checksum offloads, non-zero value enables
- * the offload.
- *
- * Return: '0' on Success; Error code otherwise.
- *
- * @warning Allowed only when DPNI is disabled
- */
int dpni_set_offload(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
enum dpni_offload type,
uint32_t config);
-/**
- * dpni_get_offload() - Get DPNI offload configuration.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @type: Type of DPNI offload
- * @config: Offload configuration.
- * For checksum offloads, a value of 1 indicates that the
- * offload is enabled.
- *
- * Return: '0' on Success; Error code otherwise.
- *
- * @warning Allowed only when DPNI is disabled
- */
int dpni_get_offload(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
enum dpni_offload type,
uint32_t *config);
-/**
- * dpni_get_qdid() - Get the Queuing Destination ID (QDID) that should be used
- * for enqueue operations
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @qtype: Type of queue to get QDID for. For applications lookig to
- * transmit traffic this should be set to DPNI_QUEUE_TX
- * @qdid: Returned virtual QDID value that should be used as an argument
- * in all enqueue operations
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_get_qdid(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- enum dpni_queue_type qtype,
- uint16_t *qdid);
+int dpni_get_qdid(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_queue_type qtype,
+ uint16_t *qdid);
+
+int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint16_t *data_offset);
#define DPNI_STATISTICS_CNT 7
+/**
+ * union dpni_statistics - Union describing the DPNI statistics
+ * @page_0: Page_0 statistics structure
+ * @page_0.ingress_all_frames: Ingress frame count
+ * @page_0.ingress_all_bytes: Ingress byte count
+ * @page_0.ingress_multicast_frames: Ingress multicast frame count
+ * @page_0.ingress_multicast_bytes: Ingress multicast byte count
+ * @page_0.ingress_broadcast_frames: Ingress broadcast frame count
+ * @page_0.ingress_broadcast_bytes: Ingress broadcast byte count
+ * @page_1: Page_1 statistics structure
+ * @page_1.egress_all_frames: Egress frame count
+ * @page_1.egress_all_bytes: Egress byte count
+ * @page_1.egress_multicast_frames: Egress multicast frame count
+ * @page_1.egress_multicast_bytes: Egress multicast byte count
+ * @page_1.egress_broadcast_frames: Egress broadcast frame count
+ * @page_1.egress_broadcast_bytes: Egress broadcast byte count
+ * @page_2: Page_2 statistics structure
+ * @page_2.ingress_filtered_frames: Ingress filtered frame count
+ * @page_2.ingress_discarded_frames: Ingress discarded frame count
+ * @page_2.ingress_nobuffer_discards: Ingress discarded frame count due to
+ * lack of buffers
+ * @page_2.egress_discarded_frames: Egress discarded frame count
+ * @page_2.egress_confirmed_frames: Egress confirmed frame count
+ * @page_3: Page_3 statistics structure with values for the selected TC
+ * @page_3.ceetm_dequeue_bytes: Cumulative count of the number of bytes dequeued
+ * @page_3.ceetm_dequeue_frames: Cumulative count of the number of frames
+ * dequeued
+ * @page_3.ceetm_reject_bytes: Cumulative count of the number of bytes in all
+ * frames whose enqueue was rejected
+ * @page_3.ceetm_reject_frames: Cumulative count of all frame enqueues rejected
+ * @page_4: congestion point drops for seleted TC
+ * @page_4.cgr_reject_frames: number of rejected frames due to congestion point
+ * @page_4.cgr_reject_bytes: number of rejected bytes due to congestion point
+ * @page_5: policer statistics per TC
+ * @page_5.policer_cnt_red: NUmber of red colored frames
+ * @page_5.policer_cnt_yellow: number of yellow colored frames
+ * @page_5.policer_cnt_green: number of green colored frames
+ * @page_5.policer_cnt_re_red: number of recolored red frames
+ * @page_5.policer_cnt_re_yellow: number of recolored yellow frames
+ * @page_6.tx_pending_frames_cnt: total number of frames pending in Tx queues
+ * @raw: raw statistics structure, used to index counters
+ */
union dpni_statistics {
- /**
- * struct page_0 - Page_0 statistics structure
- * @ingress_all_frames: Ingress frame count
- * @ingress_all_bytes: Ingress byte count
- * @ingress_multicast_frames: Ingress multicast frame count
- * @ingress_multicast_bytes: Ingress multicast byte count
- * @ingress_broadcast_frames: Ingress broadcast frame count
- * @ingress_broadcast_bytes: Ingress broadcast byte count
- */
struct {
uint64_t ingress_all_frames;
uint64_t ingress_all_bytes;
uint64_t ingress_broadcast_frames;
uint64_t ingress_broadcast_bytes;
} page_0;
- /**
- * struct page_1 - Page_1 statistics structure
- * @egress_all_frames: Egress frame count
- * @egress_all_bytes: Egress byte count
- * @egress_multicast_frames: Egress multicast frame count
- * @egress_multicast_bytes: Egress multicast byte count
- * @egress_broadcast_frames: Egress broadcast frame count
- * @egress_broadcast_bytes: Egress broadcast byte count
- */
struct {
uint64_t egress_all_frames;
uint64_t egress_all_bytes;
uint64_t egress_broadcast_frames;
uint64_t egress_broadcast_bytes;
} page_1;
- /**
- * struct page_2 - Page_2 statistics structure
- * @ingress_filtered_frames: Ingress filtered frame count
- * @ingress_discarded_frames: Ingress discarded frame count
- * @ingress_nobuffer_discards: Ingress discarded frame count due to
- * lack of buffers
- * @egress_discarded_frames: Egress discarded frame count
- * @egress_confirmed_frames: Egress confirmed frame count
- */
struct {
uint64_t ingress_filtered_frames;
uint64_t ingress_discarded_frames;
uint64_t egress_discarded_frames;
uint64_t egress_confirmed_frames;
} page_2;
- /**
- * struct raw - raw statistics structure, used to index counters
- */
+ struct {
+ uint64_t ceetm_dequeue_bytes;
+ uint64_t ceetm_dequeue_frames;
+ uint64_t ceetm_reject_bytes;
+ uint64_t ceetm_reject_frames;
+ } page_3;
+ struct {
+ uint64_t cgr_reject_frames;
+ uint64_t cgr_reject_bytes;
+ } page_4;
+ struct {
+ uint64_t policer_cnt_red;
+ uint64_t policer_cnt_yellow;
+ uint64_t policer_cnt_green;
+ uint64_t policer_cnt_re_red;
+ uint64_t policer_cnt_re_yellow;
+ } page_5;
+ struct {
+ uint64_t tx_pending_frames_cnt;
+ } page_6;
struct {
uint64_t counter[DPNI_STATISTICS_CNT];
} raw;
* Enable a-symmetric pause frames
*/
#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL
-
/**
- * struct dpni_link_state - Structure representing DPNI link state
- * @rate: Rate
- * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
- * @up: Link state; '0' for down, '1' for up
+ * Enable priority flow control pause frames
*/
-struct dpni_link_state {
- uint32_t rate;
- uint64_t options;
- int up;
-};
+#define DPNI_LINK_OPT_PFC_PAUSE 0x0000000000000010ULL
/**
- * dpni_get_link_state() - Return the link state (either up or down)
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @state: Returned link state;
- *
- * Return: '0' on Success; Error code otherwise.
+ * Advertise 10MB full duplex
*/
-int dpni_get_link_state(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- struct dpni_link_state *state);
-
+#define DPNI_ADVERTISED_10BASET_FULL 0x0000000000000001ULL
/**
- * dpni_set_max_frame_length() - Set the maximum received frame length.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @max_frame_length: Maximum received frame length (in
- * bytes); frame is discarded if its
- * length exceeds this value
- *
- * Return: '0' on Success; Error code otherwise.
+ * Advertise 100MB full duplex
*/
-int dpni_set_max_frame_length(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- uint16_t max_frame_length);
-
+#define DPNI_ADVERTISED_100BASET_FULL 0x0000000000000002ULL
/**
- * dpni_get_max_frame_length() - Get the maximum received frame length.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @max_frame_length: Maximum received frame length (in
- * bytes); frame is discarded if its
- * length exceeds this value
- *
- * Return: '0' on Success; Error code otherwise.
+ * Advertise 1GB full duplex
*/
-int dpni_get_max_frame_length(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- uint16_t *max_frame_length);
-
+#define DPNI_ADVERTISED_1000BASET_FULL 0x0000000000000004ULL
/**
- * dpni_set_multicast_promisc() - Enable/disable multicast promiscuous mode
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @en: Set to '1' to enable; '0' to disable
- *
- * Return: '0' on Success; Error code otherwise.
+ * Advertise auto-negotiation enable
*/
-int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- int en);
-
+#define DPNI_ADVERTISED_AUTONEG 0x0000000000000008ULL
/**
- * dpni_get_multicast_promisc() - Get multicast promiscuous mode
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @en: Returns '1' if enabled; '0' otherwise
- *
- * Return: '0' on Success; Error code otherwise.
+ * Advertise 10GB full duplex
*/
-int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- int *en);
-
+#define DPNI_ADVERTISED_10000BASET_FULL 0x0000000000000010ULL
/**
- * dpni_set_unicast_promisc() - Enable/disable unicast promiscuous mode
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @en: Set to '1' to enable; '0' to disable
- *
- * Return: '0' on Success; Error code otherwise.
+ * Advertise 2.5GB full duplex
*/
-int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- int en);
-
+#define DPNI_ADVERTISED_2500BASEX_FULL 0x0000000000000020ULL
/**
- * dpni_get_unicast_promisc() - Get unicast promiscuous mode
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @en: Returns '1' if enabled; '0' otherwise
- *
- * Return: '0' on Success; Error code otherwise.
+ * Advertise 5GB full duplex
*/
-int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- int *en);
+#define DPNI_ADVERTISED_5000BASET_FULL 0x0000000000000040ULL
-/**
- * dpni_set_primary_mac_addr() - Set the primary MAC address
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @mac_addr: MAC address to set as primary address
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- const uint8_t mac_addr[6]);
/**
- * dpni_get_primary_mac_addr() - Get the primary MAC address
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @mac_addr: Returned MAC address
- *
- * Return: '0' on Success; Error code otherwise.
+ * struct - Structure representing DPNI link configuration
+ * @rate: Rate
+ * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
+ * @advertising: Speeds that are advertised for autoneg (bitmap)
*/
-int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- uint8_t mac_addr[6]);
+struct dpni_link_cfg {
+ uint32_t rate;
+ uint64_t options;
+ uint64_t advertising;
+};
-/**
- * dpni_add_mac_addr() - Add MAC address filter
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @mac_addr: MAC address to add
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_add_mac_addr(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- const uint8_t mac_addr[6]);
+int dpni_set_link_cfg(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ const struct dpni_link_cfg *cfg);
/**
- * dpni_remove_mac_addr() - Remove MAC address filter
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @mac_addr: MAC address to remove
- *
- * Return: '0' on Success; Error code otherwise.
+ * struct dpni_link_state - Structure representing DPNI link state
+ * @rate: Rate
+ * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
+ * @up: Link state; '0' for down, '1' for up
+ * @state_valid: Ignore/Update the state of the link
+ * @supported: Speeds capability of the phy (bitmap)
+ * @advertising: Speeds that are advertised for autoneg (bitmap)
*/
-int dpni_remove_mac_addr(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- const uint8_t mac_addr[6]);
+struct dpni_link_state {
+ uint32_t rate;
+ uint64_t options;
+ int up;
+ int state_valid;
+ uint64_t supported;
+ uint64_t advertising;
+};
-/**
- * dpni_clear_mac_filters() - Clear all unicast and/or multicast MAC filters
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @unicast: Set to '1' to clear unicast addresses
- * @multicast: Set to '1' to clear multicast addresses
- *
- * The primary MAC address is not cleared by this operation.
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpni_clear_mac_filters(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- int unicast,
- int multicast);
+int dpni_get_link_state(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpni_link_state *state);
+
+int dpni_set_max_frame_length(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint16_t max_frame_length);
+
+int dpni_get_max_frame_length(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint16_t *max_frame_length);
+
+int dpni_set_mtu(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint16_t mtu);
+
+int dpni_get_mtu(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint16_t *mtu);
+
+int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int en);
+
+int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en);
+
+int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int en);
+
+int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en);
+
+int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ const uint8_t mac_addr[6]);
+
+int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t mac_addr[6]);
+
+int dpni_add_mac_addr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ const uint8_t mac_addr[6],
+ uint8_t flags,
+ uint8_t tc_id,
+ uint8_t flow_id);
+
+int dpni_remove_mac_addr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ const uint8_t mac_addr[6]);
+
+int dpni_clear_mac_filters(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int unicast,
+ int multicast);
+
+int dpni_get_port_mac_addr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t mac_addr[6]);
+
+int dpni_enable_vlan_filter(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int en);
/**
- * dpni_get_port_mac_addr() - Retrieve MAC address associated to the physical
- * port the DPNI is attached to
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @mac_addr: MAC address of the physical port, if any, otherwise 0
- *
- * The primary MAC address is not modified by this operation.
- *
- * Return: '0' on Success; Error code otherwise.
+ * Set vlan filter queue action
*/
-int dpni_get_port_mac_addr(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- uint8_t mac_addr[6]);
+#define DPNI_VLAN_SET_QUEUE_ACTION 1
+
+int dpni_add_vlan_id(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint16_t vlan_id,
+ uint8_t flags,
+ uint8_t tc_id,
+ uint8_t flow_id);
+
+int dpni_remove_vlan_id(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint16_t vlan_id);
+
+int dpni_clear_vlan_filters(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
/**
* enum dpni_dist_mode - DPNI distribution mode
/**
* struct dpni_fs_tbl_cfg - Flow Steering table configuration
- * @miss_action: Miss action selection
- * @default_flow_id: Used when 'miss_action = DPNI_FS_MISS_EXPLICIT_FLOWID'
+ * @miss_action: Miss action selection
+ * @default_flow_id: Used when 'miss_action = DPNI_FS_MISS_EXPLICIT_FLOWID'
+ * @keep_hash_key: used only when miss_action is set to DPNI_FS_MISS_HASH. When
+ * set to one unclassified frames will be distributed according to previous
+ * used hash key. If set to zero hash key will be replaced with the key
+ * provided for flow steering.
+ * @keep_entries: if set to one command will not delete the entries that already
+ * exist into FS table. Use this option with caution: if the table
+ * entries are not compatible with the distribution key the packets
+ * will not be classified properly.
*/
struct dpni_fs_tbl_cfg {
- enum dpni_fs_miss_action miss_action;
- uint16_t default_flow_id;
+ enum dpni_fs_miss_action miss_action;
+ uint16_t default_flow_id;
+ char keep_hash_key;
+ uint8_t keep_entries;
};
-/**
- * dpni_prepare_key_cfg() - function prepare extract parameters
- * @cfg: defining a full Key Generation profile (rule)
- * @key_cfg_buf: Zeroed 256 bytes of memory before mapping it to DMA
- *
- * This function has to be called before the following functions:
- * - dpni_set_rx_tc_dist()
- * - dpni_set_qos_table()
- */
-int dpni_prepare_key_cfg(const struct dpkg_profile_cfg *cfg,
- uint8_t *key_cfg_buf);
-
/**
* struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration
* @dist_size: Set the distribution size;
* @dist_mode: Distribution mode
* @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with
* the extractions to be used for the distribution key by calling
- * dpni_prepare_key_cfg() relevant only when
+ * dpkg_prepare_key_cfg() relevant only when
* 'dist_mode != DPNI_DIST_MODE_NONE', otherwise it can be '0'
* @fs_cfg: Flow Steering table configuration; only relevant if
* 'dist_mode = DPNI_DIST_MODE_FS'
*/
struct dpni_rx_tc_dist_cfg {
- uint16_t dist_size;
- enum dpni_dist_mode dist_mode;
- uint64_t key_cfg_iova;
- struct dpni_fs_tbl_cfg fs_cfg;
+ uint16_t dist_size;
+ enum dpni_dist_mode dist_mode;
+ uint64_t key_cfg_iova;
+ struct dpni_fs_tbl_cfg fs_cfg;
};
-/**
- * dpni_set_rx_tc_dist() - Set Rx traffic class distribution configuration
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @tc_id: Traffic class selection (0-7)
- * @cfg: Traffic class distribution configuration
- *
- * warning: if 'dist_mode != DPNI_DIST_MODE_NONE', call dpni_prepare_key_cfg()
- * first to prepare the key_cfg_iova parameter
- *
- * Return: '0' on Success; error code otherwise.
- */
-int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- uint8_t tc_id,
- const struct dpni_rx_tc_dist_cfg *cfg);
+int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t tc_id,
+ const struct dpni_rx_tc_dist_cfg *cfg);
+
/**
* enum dpni_congestion_unit - DPNI congestion units
* @DPNI_CONGESTION_UNIT_BYTES: bytes units
DPNI_CONGESTION_UNIT_FRAMES
};
-
/**
* enum dpni_dest - DPNI destination types
* @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and
* channel; not relevant for 'DPNI_DEST_NONE' option
*/
struct dpni_dest_cfg {
- enum dpni_dest dest_type;
- int dest_id;
- uint8_t priority;
+ enum dpni_dest dest_type;
+ int dest_id;
+ uint8_t priority;
};
/* DPNI congestion options */
* sw-portal's DQRR, the DQRI interrupt is asserted immediately (if enabled)
*/
#define DPNI_CONG_OPT_INTR_COALESCING_DISABLED 0x00000020
+/**
+ * This congestion will trigger flow control or priority flow control. This
+ * will have effect only if flow control is enabled with dpni_set_link_cfg()
+ */
+#define DPNI_CONG_OPT_FLOW_CONTROL 0x00000040
+
+/**
+ * enum dpni_congestion_point - Structure representing congestion point
+ * @DPNI_CP_QUEUE: Set congestion per queue, identified by QUEUE_TYPE, TC
+ * and QUEUE_INDEX
+ * @DPNI_CP_GROUP: Set congestion per queue group. Depending on options
+ * used to define the DPNI this can be either per
+ * TC (default) or per interface
+ * (DPNI_OPT_SHARED_CONGESTION set at DPNI create).
+ * QUEUE_INDEX is ignored if this type is used.
+ * @DPNI_CP_CONGESTION_GROUP: Set per congestion group id. This will work
+ * only if the DPNI is created with DPNI_OPT_CUSTOM_CG option
+ */
+
+enum dpni_congestion_point {
+ DPNI_CP_QUEUE,
+ DPNI_CP_GROUP,
+ DPNI_CP_CONGESTION_GROUP,
+};
/**
* struct dpni_congestion_notification_cfg - congestion notification
* contained in 'options'
* @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel
* @notification_mode: Mask of available options; use 'DPNI_CONG_OPT_<X>' values
+ * @cg_point: Congestion point settings
+ * @cgid: id of the congestion group. The index is relative to dpni.
*/
struct dpni_congestion_notification_cfg {
- enum dpni_congestion_unit units;
- uint32_t threshold_entry;
- uint32_t threshold_exit;
- uint64_t message_ctx;
- uint64_t message_iova;
- struct dpni_dest_cfg dest_cfg;
- uint16_t notification_mode;
+ enum dpni_congestion_unit units;
+ uint32_t threshold_entry;
+ uint32_t threshold_exit;
+ uint64_t message_ctx;
+ uint64_t message_iova;
+ struct dpni_dest_cfg dest_cfg;
+ uint16_t notification_mode;
+ enum dpni_congestion_point cg_point;
+ int cgid;
};
-/**
- * dpni_set_congestion_notification() - Set traffic class congestion
- * notification configuration
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @qtype: Type of queue - Rx, Tx and Tx confirm types are supported
- * @tc_id: Traffic class selection (0-7)
- * @cfg: congestion notification configuration
- *
- * Return: '0' on Success; error code otherwise.
- */
-int dpni_set_congestion_notification(
- struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- enum dpni_queue_type qtype,
- uint8_t tc_id,
+int dpni_set_congestion_notification(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_queue_type qtype,
+ uint8_t tc_id,
const struct dpni_congestion_notification_cfg *cfg);
-/**
- * dpni_get_congestion_notification() - Get traffic class congestion
- * notification configuration
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @qtype: Type of queue - Rx, Tx and Tx confirm types are supported
- * @tc_id: Traffic class selection (0-7)
- * @cfg: congestion notification configuration
- *
- * Return: '0' on Success; error code otherwise.
- */
-int dpni_get_congestion_notification(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- enum dpni_queue_type qtype,
- uint8_t tc_id,
+int dpni_get_congestion_notification(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_queue_type qtype,
+ uint8_t tc_id,
struct dpni_congestion_notification_cfg *cfg);
+/* DPNI FLC stash options */
+
+/**
+ * stashes the whole annotation area (up to 192 bytes)
+ */
+#define DPNI_FLC_STASH_FRAME_ANNOTATION 0x00000001
/**
* struct dpni_queue - Queue structure
- * @user_context: User data, presented to the user along with any frames
- * from this queue. Not relevant for Tx queues.
+ * @destination - Destination structure
+ * @destination.id: ID of the destination, only relevant if DEST_TYPE is > 0.
+ * Identifies either a DPIO or a DPCON object.
+ * Not relevant for Tx queues.
+ * @destination.type: May be one of the following:
+ * 0 - No destination, queue can be manually
+ * queried, but will not push traffic or
+ * notifications to a DPIO;
+ * 1 - The destination is a DPIO. When traffic
+ * becomes available in the queue a FQDAN
+ * (FQ data available notification) will be
+ * generated to selected DPIO;
+ * 2 - The destination is a DPCON. The queue is
+ * associated with a DPCON object for the
+ * purpose of scheduling between multiple
+ * queues. The DPCON may be independently
+ * configured to generate notifications.
+ * Not relevant for Tx queues.
+ * @destination.hold_active: Hold active, maintains a queue scheduled for longer
+ * in a DPIO during dequeue to reduce spread of traffic.
+ * Only relevant if queues are
+ * not affined to a single DPIO.
+ * @user_context: User data, presented to the user along with any frames
+ * from this queue. Not relevant for Tx queues.
+ * @flc: FD FLow Context structure
+ * @flc.value: Default FLC value for traffic dequeued from
+ * this queue. Please check description of FD
+ * structure for more information.
+ * Note that FLC values set using dpni_add_fs_entry,
+ * if any, take precedence over values per queue.
+ * @flc.stash_control: Boolean, indicates whether the 6 lowest
+ * - significant bits are used for stash control.
+ * significant bits are used for stash control. If set, the 6
+ * least significant bits in value are interpreted as follows:
+ * - bits 0-1: indicates the number of 64 byte units of context
+ * that are stashed. FLC value is interpreted as a memory address
+ * in this case, excluding the 6 LS bits.
+ * - bits 2-3: indicates the number of 64 byte units of frame
+ * annotation to be stashed. Annotation is placed at FD[ADDR].
+ * - bits 4-5: indicates the number of 64 byte units of frame
+ * data to be stashed. Frame data is placed at FD[ADDR] +
+ * FD[OFFSET].
+ * For more details check the Frame Descriptor section in the
+ * hardware documentation.
+ *@cgid :indicate the cgid to set relative to dpni
*/
struct dpni_queue {
- /**
- * struct destination - Destination structure
- * @id: ID of the destination, only relevant if DEST_TYPE is > 0.
- * Identifies either a DPIO or a DPCON object.
- * Not relevant for Tx queues.
- * @type: May be one of the following:
- * 0 - No destination, queue can be manually
- * queried, but will not push traffic or
- * notifications to a DPIO;
- * 1 - The destination is a DPIO. When traffic
- * becomes available in the queue a FQDAN
- * (FQ data available notification) will be
- * generated to selected DPIO;
- * 2 - The destination is a DPCON. The queue is
- * associated with a DPCON object for the
- * purpose of scheduling between multiple
- * queues. The DPCON may be independently
- * configured to generate notifications.
- * Not relevant for Tx queues.
- * @hold_active: Hold active, maintains a queue scheduled for longer
- * in a DPIO during dequeue to reduce spread of traffic.
- * Only relevant if queues are
- * not affined to a single DPIO.
- */
struct {
uint16_t id;
enum dpni_dest type;
uint8_t priority;
} destination;
uint64_t user_context;
- /**
- * struct flc - FD FLow Context structure
- * @value: FLC value to set
- * @stash_control: Boolean, indicates whether the 6 lowest
- * significant bits are used for stash control.
- */
struct {
uint64_t value;
char stash_control;
} flc;
+ int cgid;
};
/**
DPNI_CONF_DISABLE,
};
+int dpni_set_tx_confirmation_mode(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_confirmation_mode mode);
+
+int dpni_get_tx_confirmation_mode(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_confirmation_mode *mode);
+
/**
- * dpni_set_tx_confirmation_mode() - Tx confirmation mode
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @mode: Tx confirmation mode
- *
- * This function is useful only when 'DPNI_OPT_TX_CONF_DISABLED' is not
- * selected at DPNI creation.
- * Calling this function with 'mode' set to DPNI_CONF_DISABLE disables all
- * transmit confirmation (including the private confirmation queues), regardless
- * of previous settings; Note that in this case, Tx error frames are still
- * enqueued to the general transmit errors queue.
- * Calling this function with 'mode' set to DPNI_CONF_SINGLE switches all
- * Tx confirmations to a shared Tx conf queue. The ID of the queue when
- * calling dpni_set/get_queue is -1.
- * Tx confirmation mode can only be changed while the DPNI is disabled.
- * Executing this command while the DPNI is enabled will return an error.
- *
- * Return: '0' on Success; Error code otherwise.
+ * struct dpni_qos_tbl_cfg - Structure representing QOS table configuration
+ * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with
+ * key extractions to be used as the QoS criteria by calling
+ * dpkg_prepare_key_cfg()
+ * @discard_on_miss: Set to '1' to discard frames in case of no match (miss);
+ * '0' to use the 'default_tc' in such cases
+ * @keep_entries: if set to one will not delele existing table entries. This
+ * option will work properly only for dpni objects created with
+ * DPNI_OPT_HAS_KEY_MASKING option. All previous QoS entries must
+ * be compatible with new key composition rule.
+ * It is the caller's job to delete incompatible entries before
+ * executing this function.
+ * @default_tc: Used in case of no-match and 'discard_on_miss'= 0
+ */
+struct dpni_qos_tbl_cfg {
+ uint64_t key_cfg_iova;
+ int discard_on_miss;
+ int keep_entries;
+ uint8_t default_tc;
+};
+
+int dpni_set_qos_table(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ const struct dpni_qos_tbl_cfg *cfg);
+
+/**
+ * struct dpni_rule_cfg - Rule configuration for table lookup
+ * @key_iova: I/O virtual address of the key (must be in DMA-able memory)
+ * @mask_iova: I/O virtual address of the mask (must be in DMA-able memory)
+ * @key_size: key and mask size (in bytes)
*/
-int dpni_set_tx_confirmation_mode(struct fsl_mc_io *mc_io,
- uint32_t cmd_flags,
- uint16_t token,
- enum dpni_confirmation_mode mode);
+struct dpni_rule_cfg {
+ uint64_t key_iova;
+ uint64_t mask_iova;
+ uint8_t key_size;
+};
+
+int dpni_add_qos_entry(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ const struct dpni_rule_cfg *cfg,
+ uint8_t tc_id,
+ uint16_t index,
+ uint8_t flags,
+ uint8_t flow_id);
+
+int dpni_remove_qos_entry(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ const struct dpni_rule_cfg *cfg);
+
+int dpni_clear_qos_table(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
/**
- * dpni_get_api_version() - Get Data Path Network Interface API version
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @major_ver: Major version of data path network interface API
- * @minor_ver: Minor version of data path network interface API
- *
- * Return: '0' on Success; Error code otherwise.
+ * Discard matching traffic. If set, this takes precedence over any other
+ * configuration and matching traffic is always discarded.
+ */
+ #define DPNI_FS_OPT_DISCARD 0x1
+
+/**
+ * Set FLC value. If set, flc member of truct dpni_fs_action_cfg is used to
+ * override the FLC value set per queue.
+ * For more details check the Frame Descriptor section in the hardware
+ * documentation.
+ */
+#define DPNI_FS_OPT_SET_FLC 0x2
+
+/*
+ * Indicates whether the 6 lowest significant bits of FLC are used for stash
+ * control. If set, the 6 least significant bits in value are interpreted as
+ * follows:
+ * - bits 0-1: indicates the number of 64 byte units of context that are
+ * stashed. FLC value is interpreted as a memory address in this case,
+ * excluding the 6 LS bits.
+ * - bits 2-3: indicates the number of 64 byte units of frame annotation
+ * to be stashed. Annotation is placed at FD[ADDR].
+ * - bits 4-5: indicates the number of 64 byte units of frame data to be
+ * stashed. Frame data is placed at FD[ADDR] + FD[OFFSET].
+ * This flag is ignored if DPNI_FS_OPT_SET_FLC is not specified.
*/
+#define DPNI_FS_OPT_SET_STASH_CONTROL 0x4
+
+/**
+ * struct dpni_fs_action_cfg - Action configuration for table look-up
+ * @flc: FLC value for traffic matching this rule. Please check the Frame
+ * Descriptor section in the hardware documentation for more information.
+ * @flow_id: Identifies the Rx queue used for matching traffic. Supported
+ * values are in range 0 to num_queue-1.
+ * @options: Any combination of DPNI_FS_OPT_ values.
+ */
+struct dpni_fs_action_cfg {
+ uint64_t flc;
+ uint16_t flow_id;
+ uint16_t options;
+};
+
+int dpni_add_fs_entry(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t tc_id,
+ uint16_t index,
+ const struct dpni_rule_cfg *cfg,
+ const struct dpni_fs_action_cfg *action);
+
+int dpni_remove_fs_entry(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t tc_id,
+ const struct dpni_rule_cfg *cfg);
+
+int dpni_clear_fs_entries(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t tc_id);
+
int dpni_get_api_version(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t *major_ver,
*/
#define DPNI_QUEUE_OPT_HOLD_ACTIVE 0x00000008
-/**
- * dpni_set_queue() - Set queue parameters
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @qtype: Type of queue - all queue types are supported, although
- * the command is ignored for Tx
- * @tc: Traffic class, in range 0 to NUM_TCS - 1
- * @index: Selects the specific queue out of the set
- * allocated for the same TC.Value must be in
- * range 0 to NUM_QUEUES - 1
- * @options: A combination of DPNI_QUEUE_OPT_ values that control
- * what configuration options are set on the queue
- * @queue: Queue configuration structure
- *
- * Return: '0' on Success; Error code otherwise.
- */
+#define DPNI_QUEUE_OPT_SET_CGID 0x00000040
+#define DPNI_QUEUE_OPT_CLEAR_CGID 0x00000080
+
int dpni_set_queue(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
uint8_t options,
const struct dpni_queue *queue);
-/**
- * dpni_get_queue() - Get queue parameters
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @qtype: Type of queue - all queue types are supported
- * @tc: Traffic class, in range 0 to NUM_TCS - 1
- * @index: Selects the specific queue out of the set allocated
- * for the same TC. Value must be in range 0 to
- * NUM_QUEUES - 1
- * @queue: Queue configuration structure
- * @qid: Queue identification
- *
- * This function returns current queue configuration which can be changed by
- * calling dpni_set_queue, and queue identification information.
- * Returned qid.fqid and/or qid.qdbin values can be used to:
- * - enqueue traffic for Tx queues,
- * - perform volatile dequeue for Rx and, if applicable, Tx confirmation
- * clean-up,
- * - retrieve queue state.
- *
- * All these operations are supported through the DPIO run-time API.
- *
- * Return: '0' on Success; Error code otherwise.
- */
int dpni_get_queue(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
struct dpni_queue *queue,
struct dpni_queue_id *qid);
-/**
- * dpni_get_statistics() - Get DPNI statistics
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @page: Selects the statistics page to retrieve, see
- * DPNI_GET_STATISTICS output.
- * Pages are numbered 0 to 2.
- * @stat: Structure containing the statistics
- *
- * Return: '0' on Success; Error code otherwise.
- */
int dpni_get_statistics(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
uint8_t page,
+ uint16_t param,
union dpni_statistics *stat);
-/**
- * dpni_reset_statistics() - Clears DPNI statistics
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- *
- * Return: '0' on Success; Error code otherwise.
- */
int dpni_reset_statistics(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token);
-/**
- * enum dpni_congestion_point - Structure representing congestion point
- * @DPNI_CP_QUEUE: Set taildrop per queue, identified by QUEUE_TYPE, TC and
- * QUEUE_INDEX
- * @DPNI_CP_GROUP: Set taildrop per queue group. Depending on options used
- * to define the DPNI this can be either per
- * TC (default) or per interface
- * (DPNI_OPT_SHARED_CONGESTION set at DPNI create).
- * QUEUE_INDEX is ignored if this type is used.
- */
-enum dpni_congestion_point {
- DPNI_CP_QUEUE,
- DPNI_CP_GROUP,
-};
-
/**
* struct dpni_taildrop - Structure representing the taildrop
* @enable: Indicates whether the taildrop is active or not.
* @units: Indicates the unit of THRESHOLD. Queue taildrop only
- * supports byte units, this field is ignored and
- * assumed = 0 if CONGESTION_POINT is 0.
+ * supports byte units, this field is ignored and
+ * assumed = 0 if CONGESTION_POINT is 0.
* @threshold: Threshold value, in units identified by UNITS field. Value 0
- * cannot be used as a valid taildrop threshold,
- * THRESHOLD must be > 0 if the taildrop is
- * enabled.
+ * cannot be used as a valid taildrop threshold,
+ * THRESHOLD must be > 0 if the taildrop is
+ * enabled.
+ * @oal : Overhead Accounting Length, a 12-bit, 2's complement value
+ * with range (-2048 to +2047) representing a fixed per-frame
+ * overhead to be added to the actual length of a frame when
+ * performing WRED and tail drop calculations and threshold
+ * comparisons.
*/
struct dpni_taildrop {
char enable;
enum dpni_congestion_unit units;
uint32_t threshold;
+ int16_t oal;
};
-/**
- * dpni_set_taildrop() - Set taildrop per queue or TC
- *
- * Setting a per-TC taildrop (cg_point = DPNI_CP_GROUP) will reset any current
- * congestion notification or early drop (WRED) configuration previously applied
- * to the same TC.
- *
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @cg_point: Congestion point. DPNI_CP_QUEUE is only supported in
- * combination with DPNI_QUEUE_RX.
- * @q_type: Queue type, can be DPNI_QUEUE_RX or DPNI_QUEUE_TX.
- * @tc: Traffic class to apply this taildrop to
- * @q_index: Index of the queue if the DPNI supports multiple queues for
- * traffic distribution.
- * Ignored if CONGESTION_POINT is not DPNI_CP_QUEUE.
- * @taildrop: Taildrop structure
- *
- * Return: '0' on Success; Error code otherwise.
- */
int dpni_set_taildrop(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
uint8_t q_index,
struct dpni_taildrop *taildrop);
-/**
- * dpni_get_taildrop() - Get taildrop information
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPNI object
- * @cg_point: Congestion point
- * @q_type:
- * @tc: Traffic class to apply this taildrop to
- * @q_index: Index of the queue if the DPNI supports multiple queues for
- * traffic distribution. Ignored if CONGESTION_POINT
- * is not 0.
- * @taildrop: Taildrop structure
- *
- * Return: '0' on Success; Error code otherwise.
- */
int dpni_get_taildrop(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
uint8_t tc,
uint8_t q_index,
struct dpni_taildrop *taildrop);
+
+int dpni_set_opr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t tc,
+ uint8_t index,
+ uint8_t options,
+ struct opr_cfg *cfg);
+
+int dpni_get_opr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t tc,
+ uint8_t index,
+ struct opr_cfg *cfg,
+ struct opr_qry *qry);
+
+/**
+ * When used for queue_idx in function dpni_set_rx_dist_default_queue will
+ * signal to dpni to drop all unclassified frames
+ */
+#define DPNI_FS_MISS_DROP ((uint16_t)-1)
+
+/**
+ * struct dpni_rx_dist_cfg - distribution configuration
+ * @dist_size: distribution size; supported values: 1,2,3,4,6,7,8,
+ * 12,14,16,24,28,32,48,56,64,96,112,128,192,224,256,384,448,
+ * 512,768,896,1024
+ * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with
+ * the extractions to be used for the distribution key by calling
+ * dpkg_prepare_key_cfg() relevant only when enable!=0 otherwise
+ * it can be '0'
+ * @enable: enable/disable the distribution.
+ * @tc: TC id for which distribution is set
+ * @fs_miss_flow_id: when packet misses all rules from flow steering table and
+ * hash is disabled it will be put into this queue id; use
+ * DPNI_FS_MISS_DROP to drop frames. The value of this field is
+ * used only when flow steering distribution is enabled and hash
+ * distribution is disabled
+ */
+struct dpni_rx_dist_cfg {
+ uint16_t dist_size;
+ uint64_t key_cfg_iova;
+ uint8_t enable;
+ uint8_t tc;
+ uint16_t fs_miss_flow_id;
+};
+
+int dpni_set_rx_fs_dist(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, const struct dpni_rx_dist_cfg *cfg);
+
+int dpni_set_rx_hash_dist(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, const struct dpni_rx_dist_cfg *cfg);
+
+int dpni_add_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, uint16_t tpid);
+
+int dpni_remove_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, uint16_t tpid);
+
+/**
+ * struct dpni_custom_tpid_cfg - custom TPID configuration. Contains custom TPID
+ * values used in current dpni object to detect 802.1q frames.
+ * @tpid1: first tag. Not used if zero.
+ * @tpid2: second tag. Not used if zero.
+ */
+struct dpni_custom_tpid_cfg {
+ uint16_t tpid1;
+ uint16_t tpid2;
+};
+
+int dpni_get_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, struct dpni_custom_tpid_cfg *tpid);
+
+/**
+ * enum dpni_soft_sequence_dest - Enumeration of WRIOP software sequence
+ * destinations
+ * @DPNI_SS_INGRESS: Ingress parser
+ * @DPNI_SS_EGRESS: Egress parser
+ */
+enum dpni_soft_sequence_dest {
+ DPNI_SS_INGRESS = 0,
+ DPNI_SS_EGRESS = 1,
+};
+
+/**
+ * struct dpni_load_ss_cfg - Structure for Software Sequence load configuration
+ * @dest: Destination of the Software Sequence: ingress or egress parser
+ * @ss_size: Size of the Software Sequence
+ * @ss_offset: The offset where to load the Software Sequence (0x20-0x7FD)
+ * @ss_iova: I/O virtual address of the Software Sequence
+ */
+struct dpni_load_ss_cfg {
+ enum dpni_soft_sequence_dest dest;
+ uint16_t ss_size;
+ uint16_t ss_offset;
+ uint64_t ss_iova;
+};
+
+/**
+ * struct dpni_enable_ss_cfg - Structure for software sequence enable
+ * configuration
+ * @dest: Destination of the Software Sequence: ingress or egress parser
+ * @hxs: HXS to attach the software sequence to
+ * @set_start: If the Software Sequence or HDR it is attached to is set as
+ * parser start
+ * If hxs=DUMMY_LAST_HXS the ss_offset is set directly as parser
+ * start else the hdr index code is set as parser start
+ * @ss_offset: The offset of the Software Sequence to enable or set as parse
+ * start
+ * @param_size: Size of the software sequence parameters
+ * @param_offset: Offset in the parameter zone for the software sequence
+ * parameters
+ * @param_iova: I/O virtual address of the parameters
+ */
+struct dpni_enable_ss_cfg {
+ enum dpni_soft_sequence_dest dest;
+ uint16_t hxs;
+ uint8_t set_start;
+ uint16_t ss_offset;
+ uint8_t param_size;
+ uint8_t param_offset;
+ uint64_t param_iova;
+};
+
+/**
+ * dpni_load_sw_sequence() - Loads a software sequence in parser memory.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @cfg: Software sequence load configuration
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpni_load_sw_sequence(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpni_load_ss_cfg *cfg);
+
+/**
+ * dpni_eanble_sw_sequence() - Enables a software sequence in the parser
+ * profile
+ * corresponding to the ingress or egress of the DPNI.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @cfg: Software sequence enable configuration
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpni_enable_sw_sequence(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpni_enable_ss_cfg *cfg);
+
+/**
+ * struct dpni_sw_sequence_layout - Structure for software sequence enable
+ * configuration
+ * @num_ss: Number of software sequences returned
+ * @ss: Array of software sequence entries. The number of valid entries
+ * must match 'num_ss' value
+ */
+struct dpni_sw_sequence_layout {
+ uint8_t num_ss;
+ struct {
+ uint16_t ss_offset;
+ uint16_t ss_size;
+ uint8_t param_offset;
+ uint8_t param_size;
+ } ss[DPNI_SW_SEQUENCE_LAYOUT_SIZE];
+};
+
+/**
+ * dpni_get_sw_sequence_layout() - Get the soft sequence layout
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @src: Source of the layout (WRIOP Rx or Tx)
+ * @ss_layout_iova: I/O virtual address of 264 bytes DMA-able memory
+ *
+ * warning: After calling this function, call dpni_extract_sw_sequence_layout()
+ * to get the layout
+ *
+ * Return: '0' on Success; error code otherwise.
+ */
+int dpni_get_sw_sequence_layout(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ enum dpni_soft_sequence_dest src,
+ uint64_t ss_layout_iova);
+
+/**
+ * dpni_extract_sw_sequence_layout() - extract the software sequence layout
+ * @layout: software sequence layout
+ * @sw_sequence_layout_buf: Zeroed 264 bytes of memory before mapping it
+ * to DMA
+ *
+ * This function has to be called after dpni_get_sw_sequence_layout
+ *
+ */
+void dpni_extract_sw_sequence_layout(struct dpni_sw_sequence_layout *layout,
+ const uint8_t *sw_sequence_layout_buf);
+
#endif /* __FSL_DPNI_H */