net/bnxt: update buffer descriptor definitions

[dpdk.git] / drivers / net / e1000 / base / e1000_82575.c

diff --git a/drivers/net/e1000/base/e1000_82575.c b/drivers/net/e1000/base/e1000_82575.c
index 4374eab..723885d 100644 (file)
--- a/drivers/net/e1000/base/e1000_82575.c
+++ b/drivers/net/e1000/base/e1000_82575.c
@@ -277,6 +277,11 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw)
                        if (ret_val)
                                goto out;
                }
+               if (phy->id == M88E1543_E_PHY_ID) {
+                       ret_val = e1000_initialize_M88E1543_phy(hw);
+                       if (ret_val)
+                               goto out;
+               }
                break;
        case IGP03E1000_E_PHY_ID:
        case IGP04E1000_E_PHY_ID:
@@ -2817,7 +2822,7 @@ s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
  *  e1000_initialize_M88E1512_phy - Initialize M88E1512 PHY
  *  @hw: pointer to the HW structure
  *
- *  Initialize Marverl 1512 to work correctly with Avoton.
+ *  Initialize Marvell 1512 to work correctly with Avoton.
  **/
 s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw)
 {
@@ -2902,6 +2907,105 @@ out:
        return ret_val;
 }
 
+/**
+ *  e1000_initialize_M88E1543_phy - Initialize M88E1543 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize Marvell 1543 to work correctly with Avoton.
+ **/
+s32 e1000_initialize_M88E1543_phy(struct e1000_hw *hw)
+{
+       struct e1000_phy_info *phy = &hw->phy;
+       s32 ret_val = E1000_SUCCESS;
+
+       DEBUGFUNC("e1000_initialize_M88E1543_phy");
+
+       /* Check if this is correct PHY. */
+       if (phy->id != M88E1543_E_PHY_ID)
+               goto out;
+
+       /* Switch to PHY page 0xFF. */
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159);
+       if (ret_val)
+               goto out;
+
+       /* Switch to PHY page 0xFB. */
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0xC00D);
+       if (ret_val)
+               goto out;
+
+       /* Switch to PHY page 0x12. */
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12);
+       if (ret_val)
+               goto out;
+
+       /* Change mode to SGMII-to-Copper */
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001);
+       if (ret_val)
+               goto out;
+
+       /* Switch to PHY page 1. */
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1);
+       if (ret_val)
+               goto out;
+
+       /* Change mode to 1000BASE-X/SGMII and autoneg enable; reset */
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140);
+       if (ret_val)
+               goto out;
+
+       /* Return the PHY to page 0. */
+       ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+       if (ret_val)
+               goto out;
+
+       ret_val = phy->ops.commit(hw);
+       if (ret_val) {
+               DEBUGOUT("Error committing the PHY changes\n");
+               return ret_val;
+       }
+
+       msec_delay(1000);
+out:
+       return ret_val;
+}
+
 /**
  *  e1000_set_eee_i350 - Enable/disable EEE support
  *  @hw: pointer to the HW structure