-/*******************************************************************************
-
-Copyright (c) 2001-2015, Intel Corporation
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- 3. Neither the name of the Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-***************************************************************************/
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2020 Intel Corporation
+ */
#include "e1000_api.h"
; /* Empty */
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
- swfw_sync &= ~mask;
+ swfw_sync &= (u32)~mask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore_generic(hw);
}
for (i = 0; i < words; i++) {
- eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
+ eewr = ((offset + i) << E1000_NVM_RW_ADDR_SHIFT) |
(data[i] << E1000_NVM_RW_REG_DATA) |
E1000_NVM_RW_REG_START;
switch (offset) {
case NVM_MAC_ADDR:
ret_val = e1000_read_invm_word_i210(hw, (u8)offset, &data[0]);
- ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+1,
+ ret_val |= e1000_read_invm_word_i210(hw, (u8)offset + 1,
&data[1]);
- ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+2,
+ ret_val |= e1000_read_invm_word_i210(hw, (u8)offset + 2,
&data[2]);
if (ret_val != E1000_SUCCESS)
DEBUGOUT("MAC Addr not found in iNVM\n");
{
e1000_init_function_pointers_82575(hw);
hw->nvm.ops.init_params = e1000_init_nvm_params_i210;
-
- return;
}
/**
return ret_val;
}
-/**
- * __e1000_access_xmdio_reg - Read/write XMDIO register
- * @hw: pointer to the HW structure
- * @address: XMDIO address to program
- * @dev_addr: device address to program
- * @data: pointer to value to read/write from/to the XMDIO address
- * @read: boolean flag to indicate read or write
- **/
-STATIC s32 __e1000_access_xmdio_reg(struct e1000_hw *hw, u16 address,
- u8 dev_addr, u16 *data, bool read)
-{
- s32 ret_val;
-
- DEBUGFUNC("__e1000_access_xmdio_reg");
-
- ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr);
- if (ret_val)
- return ret_val;
-
- ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address);
- if (ret_val)
- return ret_val;
-
- ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA |
- dev_addr);
- if (ret_val)
- return ret_val;
-
- if (read)
- ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data);
- else
- ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data);
- if (ret_val)
- return ret_val;
-
- /* Recalibrate the device back to 0 */
- ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0);
- if (ret_val)
- return ret_val;
-
- return ret_val;
-}
-
-/**
- * e1000_read_xmdio_reg - Read XMDIO register
- * @hw: pointer to the HW structure
- * @addr: XMDIO address to program
- * @dev_addr: device address to program
- * @data: value to be read from the EMI address
- **/
-s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data)
-{
- DEBUGFUNC("e1000_read_xmdio_reg");
-
- return __e1000_access_xmdio_reg(hw, addr, dev_addr, data, true);
-}
-
-/**
- * e1000_write_xmdio_reg - Write XMDIO register
- * @hw: pointer to the HW structure
- * @addr: XMDIO address to program
- * @dev_addr: device address to program
- * @data: value to be written to the XMDIO address
- **/
-s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data)
-{
- DEBUGFUNC("e1000_read_xmdio_reg");
-
- return __e1000_access_xmdio_reg(hw, addr, dev_addr, &data, false);
-}
-
/**
* e1000_pll_workaround_i210
* @hw: pointer to the HW structure
STATIC s32 e1000_pll_workaround_i210(struct e1000_hw *hw)
{
s32 ret_val;
- u32 wuc, mdicnfg, ctrl_ext, reg_val;
+ u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val;
u16 nvm_word, phy_word, pci_word, tmp_nvm;
int i;
+ /* Get PHY semaphore */
+ hw->phy.ops.acquire(hw);
/* Get and set needed register values */
wuc = E1000_READ_REG(hw, E1000_WUC);
mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG);
if (ret_val != E1000_SUCCESS)
nvm_word = E1000_INVM_DEFAULT_AL;
tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+ phy_word = E1000_PHY_PLL_UNCONF;
for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
- /* check current state */
- hw->phy.ops.read_reg(hw, (E1000_PHY_PLL_FREQ_PAGE |
- E1000_PHY_PLL_FREQ_REG), &phy_word);
+ /* check current state directly from internal PHY */
+ e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, 0xFC);
+ usec_delay(20);
+ e1000_read_phy_reg_mdic(hw, E1000_PHY_PLL_FREQ_REG, &phy_word);
+ usec_delay(20);
+ e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, 0);
if ((phy_word & E1000_PHY_PLL_UNCONF)
!= E1000_PHY_PLL_UNCONF) {
ret_val = E1000_SUCCESS;
} else {
ret_val = -E1000_ERR_PHY;
}
- hw->phy.ops.reset(hw);
+ /* directly reset the internal PHY */
+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl|E1000_CTRL_PHY_RST);
+
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE);
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
E1000_WRITE_REG(hw, E1000_WUC, 0);
reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16);
- E1000_WRITE_REG(hw, E1000_EEARBC, reg_val);
+ E1000_WRITE_REG(hw, E1000_EEARBC_I210, reg_val);
e1000_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
pci_word |= E1000_PCI_PMCSR_D3;
pci_word &= ~E1000_PCI_PMCSR_D3;
e1000_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16);
- E1000_WRITE_REG(hw, E1000_EEARBC, reg_val);
+ E1000_WRITE_REG(hw, E1000_EEARBC_I210, reg_val);
/* restore WUC register */
E1000_WRITE_REG(hw, E1000_WUC, wuc);
}
/* restore MDICNFG setting */
E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg);
+ /* Release PHY semaphore */
+ hw->phy.ops.release(hw);
return ret_val;
}
s32 e1000_init_hw_i210(struct e1000_hw *hw)
{
s32 ret_val;
+ struct e1000_mac_info *mac = &hw->mac;
DEBUGFUNC("e1000_init_hw_i210");
if ((hw->mac.type >= e1000_i210) &&
return ret_val;
}
hw->phy.ops.get_cfg_done = e1000_get_cfg_done_i210;
- ret_val = e1000_init_hw_82575(hw);
+
+ /* Initialize identification LED */
+ ret_val = mac->ops.id_led_init(hw);
+
+ ret_val = e1000_init_hw_base(hw);
return ret_val;
}