-/*******************************************************************************
-
-Copyright (c) 2001-2015, Intel Corporation
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- 3. Neither the name of the Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-***************************************************************************/
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001 - 2015 Intel Corporation
+ */
#include "e1000_api.h"
STATIC s32 e1000_pll_workaround_i210(struct e1000_hw *hw)
{
s32 ret_val;
- u32 wuc, mdicnfg, ctrl_ext, reg_val;
+ u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val;
u16 nvm_word, phy_word, pci_word, tmp_nvm;
int i;
if (ret_val != E1000_SUCCESS)
nvm_word = E1000_INVM_DEFAULT_AL;
tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+ phy_word = E1000_PHY_PLL_UNCONF;
for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
- /* check current state */
- hw->phy.ops.read_reg(hw, (E1000_PHY_PLL_FREQ_PAGE |
- E1000_PHY_PLL_FREQ_REG), &phy_word);
+ /* check current state directly from internal PHY */
+ e1000_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
+ E1000_PHY_PLL_FREQ_REG), &phy_word);
if ((phy_word & E1000_PHY_PLL_UNCONF)
!= E1000_PHY_PLL_UNCONF) {
ret_val = E1000_SUCCESS;
} else {
ret_val = -E1000_ERR_PHY;
}
- hw->phy.ops.reset(hw);
+ /* directly reset the internal PHY */
+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl|E1000_CTRL_PHY_RST);
+
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE);
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
E1000_WRITE_REG(hw, E1000_WUC, 0);
reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16);
- E1000_WRITE_REG(hw, E1000_EEARBC, reg_val);
+ E1000_WRITE_REG(hw, E1000_EEARBC_I210, reg_val);
e1000_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
pci_word |= E1000_PCI_PMCSR_D3;
pci_word &= ~E1000_PCI_PMCSR_D3;
e1000_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16);
- E1000_WRITE_REG(hw, E1000_EEARBC, reg_val);
+ E1000_WRITE_REG(hw, E1000_EEARBC_I210, reg_val);
/* restore WUC register */
E1000_WRITE_REG(hw, E1000_WUC, wuc);
return ret_val;
}
+/**
+ * e1000_get_cfg_done_i210 - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ * Read the management control register for the config done bit for
+ * completion status. NOTE: silicon which is EEPROM-less will fail trying
+ * to read the config done bit, so an error is *ONLY* logged and returns
+ * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon
+ * would not be able to be reset or change link.
+ **/
+STATIC s32 e1000_get_cfg_done_i210(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+ DEBUGFUNC("e1000_get_cfg_done_i210");
+
+ while (timeout) {
+ if (E1000_READ_REG(hw, E1000_EEMNGCTL_I210) & mask)
+ break;
+ msec_delay(1);
+ timeout--;
+ }
+ if (!timeout)
+ DEBUGOUT("MNG configuration cycle has not completed.\n");
+
+ return E1000_SUCCESS;
+}
+
/**
* e1000_init_hw_i210 - Init hw for I210/I211
* @hw: pointer to the HW structure
if (ret_val != E1000_SUCCESS)
return ret_val;
}
+ hw->phy.ops.get_cfg_done = e1000_get_cfg_done_i210;
ret_val = e1000_init_hw_82575(hw);
return ret_val;
}
git.droids-corp.org / dpdk.git / blobdiff