}
}
+static void enic_prep_wq_for_simple_tx(struct enic *enic, uint16_t queue_idx)
+{
+ struct wq_enet_desc *desc;
+ struct vnic_wq *wq;
+ unsigned int i;
+
+ /*
+ * Fill WQ descriptor fields that never change. Every descriptor is
+ * one packet, so set EOP. Also set CQ_ENTRY every ENIC_WQ_CQ_THRESH
+ * descriptors (i.e. request one completion update every 32 packets).
+ */
+ wq = &enic->wq[queue_idx];
+ desc = (struct wq_enet_desc *)wq->ring.descs;
+ for (i = 0; i < wq->ring.desc_count; i++, desc++) {
+ desc->header_length_flags = 1 << WQ_ENET_FLAGS_EOP_SHIFT;
+ if (i % ENIC_WQ_CQ_THRESH == ENIC_WQ_CQ_THRESH - 1)
+ desc->header_length_flags |=
+ (1 << WQ_ENET_FLAGS_CQ_ENTRY_SHIFT);
+ }
+}
+
+static void pick_rx_handler(struct enic *enic)
+{
+ struct rte_eth_dev *eth_dev;
+
+ /* Use the non-scatter, simplified RX handler if possible. */
+ eth_dev = enic->rte_dev;
+ if (enic->rq_count > 0 && enic->rq[0].data_queue_enable == 0) {
+ PMD_INIT_LOG(DEBUG, " use the non-scatter Rx handler");
+ eth_dev->rx_pkt_burst = &enic_noscatter_recv_pkts;
+ } else {
+ PMD_INIT_LOG(DEBUG, " use the normal Rx handler");
+ eth_dev->rx_pkt_burst = &enic_recv_pkts;
+ }
+}
+
int enic_enable(struct enic *enic)
{
unsigned int index;
int err;
struct rte_eth_dev *eth_dev = enic->rte_dev;
+ uint64_t simple_tx_offloads;
eth_dev->data->dev_link.link_speed = vnic_dev_port_speed(enic->vdev);
eth_dev->data->dev_link.link_duplex = ETH_LINK_FULL_DUPLEX;
}
}
+ /*
+ * Use the simple TX handler if possible. Only checksum offloads
+ * and vlan insertion are supported.
+ */
+ simple_tx_offloads = enic->tx_offload_capa &
+ (DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_VLAN_INSERT |
+ DEV_TX_OFFLOAD_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_UDP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_CKSUM);
+ if ((eth_dev->data->dev_conf.txmode.offloads &
+ ~simple_tx_offloads) == 0) {
+ PMD_INIT_LOG(DEBUG, " use the simple tx handler");
+ eth_dev->tx_pkt_burst = &enic_simple_xmit_pkts;
+ for (index = 0; index < enic->wq_count; index++)
+ enic_prep_wq_for_simple_tx(enic, index);
+ } else {
+ PMD_INIT_LOG(DEBUG, " use the default tx handler");
+ eth_dev->tx_pkt_burst = &enic_xmit_pkts;
+ }
+
+ pick_rx_handler(enic);
+
for (index = 0; index < enic->wq_count; index++)
enic_start_wq(enic, index);
for (index = 0; index < enic->rq_count; index++)
enic = vnic_dev_priv(rq_sop->vdev);
rq_data = &enic->rq[rq_sop->data_queue_idx];
+ if (rq_sop->free_mbufs) {
+ struct rte_mbuf **mb;
+ int i;
+
+ mb = rq_sop->free_mbufs;
+ for (i = ENIC_RX_BURST_MAX - rq_sop->num_free_mbufs;
+ i < ENIC_RX_BURST_MAX; i++)
+ rte_pktmbuf_free(mb[i]);
+ rte_free(rq_sop->free_mbufs);
+ rq_sop->free_mbufs = NULL;
+ rq_sop->num_free_mbufs = 0;
+ }
+
enic_rxmbuf_queue_release(enic, rq_sop);
if (rq_data->in_use)
enic_rxmbuf_queue_release(enic, rq_data);
rq_data->max_mbufs_per_pkt = mbufs_per_pkt;
if (mbufs_per_pkt > 1) {
- min_sop = 64;
+ min_sop = ENIC_RX_BURST_MAX;
max_sop = ((enic->config.rq_desc_count /
(mbufs_per_pkt - 1)) & ENIC_ALIGN_DESCS_MASK);
min_data = min_sop * (mbufs_per_pkt - 1);
max_data = enic->config.rq_desc_count;
} else {
- min_sop = 64;
+ min_sop = ENIC_RX_BURST_MAX;
max_sop = enic->config.rq_desc_count;
min_data = 0;
max_data = 0;
goto err_free_sop_mbuf;
}
+ rq_sop->free_mbufs = (struct rte_mbuf **)
+ rte_zmalloc_socket("rq->free_mbufs",
+ sizeof(struct rte_mbuf *) *
+ ENIC_RX_BURST_MAX,
+ RTE_CACHE_LINE_SIZE, rq_sop->socket_id);
+ if (rq_sop->free_mbufs == NULL)
+ goto err_free_data_mbuf;
+ rq_sop->num_free_mbufs = 0;
+
rq_sop->tot_nb_desc = nb_desc; /* squirl away for MTU update function */
return 0;
+err_free_data_mbuf:
+ rte_free(rq_data->mbuf_ring);
err_free_sop_mbuf:
rte_free(rq_sop->mbuf_ring);
err_free_cq:
/* put back the real receive function */
rte_mb();
- eth_dev->rx_pkt_burst = enic_recv_pkts;
+ pick_rx_handler(enic);
rte_mb();
/* restart Rx traffic */
enic->overlay_offload = true;
enic->vxlan_port = ENIC_DEFAULT_VXLAN_PORT;
dev_info(enic, "Overlay offload is enabled\n");
+ /*
+ * Reset the vxlan port to the default, as the NIC firmware
+ * does not reset it automatically and keeps the old setting.
+ */
+ if (vnic_dev_overlay_offload_cfg(enic->vdev,
+ OVERLAY_CFG_VXLAN_PORT_UPDATE,
+ ENIC_DEFAULT_VXLAN_PORT)) {
+ dev_err(enic, "failed to update vxlan port\n");
+ return -EINVAL;
+ }
}
return 0;