error_interrupt_offset);
/* Compute unsupported ol flags for enic_prep_pkts() */
enic->wq[index].tx_offload_notsup_mask =
- PKT_TX_OFFLOAD_MASK ^ enic->tx_offload_mask;
+ RTE_MBUF_F_TX_OFFLOAD_MASK ^ enic->tx_offload_mask;
cq_idx = enic_cq_wq(enic, index);
vnic_cq_init(&enic->cq[cq_idx],
struct rq_enet_desc *rqd = rq->ring.descs;
unsigned i;
dma_addr_t dma_addr;
- uint32_t max_rx_pkt_len;
+ uint32_t max_rx_pktlen;
uint16_t rq_buf_len;
if (!rq->in_use)
/*
* If *not* using scatter and the mbuf size is greater than the
- * requested max packet size (max_rx_pkt_len), then reduce the
- * posted buffer size to max_rx_pkt_len. HW still receives packets
- * larger than max_rx_pkt_len, but they will be truncated, which we
+ * requested max packet size (mtu + eth overhead), then reduce the
+ * posted buffer size to max packet size. HW still receives packets
+ * larger than max packet size, but they will be truncated, which we
* drop in the rx handler. Not ideal, but better than returning
* large packets when the user is not expecting them.
*/
- max_rx_pkt_len = enic->rte_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+ max_rx_pktlen = enic_mtu_to_max_rx_pktlen(enic->rte_dev->data->mtu);
rq_buf_len = rte_pktmbuf_data_room_size(rq->mp) - RTE_PKTMBUF_HEADROOM;
- if (max_rx_pkt_len < rq_buf_len && !rq->data_queue_enable)
- rq_buf_len = max_rx_pkt_len;
+ if (max_rx_pktlen < rq_buf_len && !rq->data_queue_enable)
+ rq_buf_len = max_rx_pktlen;
for (i = 0; i < rq->ring.desc_count; i++, rqd++) {
mb = rte_mbuf_raw_alloc(rq->mp);
if (mb == NULL) {
memset(&link, 0, sizeof(link));
link.link_status = enic_get_link_status(enic);
- link.link_duplex = ETH_LINK_FULL_DUPLEX;
+ link.link_duplex = RTE_ETH_LINK_FULL_DUPLEX;
link.link_speed = vnic_dev_port_speed(enic->vdev);
return rte_eth_linkstatus_set(eth_dev, &link);
rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
enic_log_q_error(enic);
/* Re-enable irq in case of INTx */
- rte_intr_ack(&enic->pdev->intr_handle);
+ rte_intr_ack(enic->pdev->intr_handle);
}
static int enic_rxq_intr_init(struct enic *enic)
" interrupts\n");
return err;
}
- intr_handle->intr_vec = rte_zmalloc("enic_intr_vec",
- rxq_intr_count * sizeof(int), 0);
- if (intr_handle->intr_vec == NULL) {
+
+ if (rte_intr_vec_list_alloc(intr_handle, "enic_intr_vec",
+ rxq_intr_count)) {
dev_err(enic, "Failed to allocate intr_vec\n");
return -ENOMEM;
}
for (i = 0; i < rxq_intr_count; i++)
- intr_handle->intr_vec[i] = i + ENICPMD_RXQ_INTR_OFFSET;
+ if (rte_intr_vec_list_index_set(intr_handle, i,
+ i + ENICPMD_RXQ_INTR_OFFSET))
+ return -rte_errno;
return 0;
}
intr_handle = enic->rte_dev->intr_handle;
rte_intr_efd_disable(intr_handle);
- if (intr_handle->intr_vec != NULL) {
- rte_free(intr_handle->intr_vec);
- intr_handle->intr_vec = NULL;
- }
+
+ rte_intr_vec_list_free(intr_handle);
}
static void enic_prep_wq_for_simple_tx(struct enic *enic, uint16_t queue_idx)
}
eth_dev->data->dev_link.link_speed = vnic_dev_port_speed(enic->vdev);
- eth_dev->data->dev_link.link_duplex = ETH_LINK_FULL_DUPLEX;
+ eth_dev->data->dev_link.link_duplex = RTE_ETH_LINK_FULL_DUPLEX;
/* vnic notification of link status has already been turned on in
* enic_dev_init() which is called during probe time. Here we are
* and vlan insertion are supported.
*/
simple_tx_offloads = enic->tx_offload_capa &
- (DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
- DEV_TX_OFFLOAD_VLAN_INSERT |
- DEV_TX_OFFLOAD_IPV4_CKSUM |
- DEV_TX_OFFLOAD_UDP_CKSUM |
- DEV_TX_OFFLOAD_TCP_CKSUM);
+ (RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM |
+ RTE_ETH_TX_OFFLOAD_VLAN_INSERT |
+ RTE_ETH_TX_OFFLOAD_IPV4_CKSUM |
+ RTE_ETH_TX_OFFLOAD_UDP_CKSUM |
+ RTE_ETH_TX_OFFLOAD_TCP_CKSUM);
if ((eth_dev->data->dev_conf.txmode.offloads &
~simple_tx_offloads) == 0) {
ENICPMD_LOG(DEBUG, " use the simple tx handler");
vnic_dev_enable_wait(enic->vdev);
/* Register and enable error interrupt */
- rte_intr_callback_register(&(enic->pdev->intr_handle),
+ rte_intr_callback_register(enic->pdev->intr_handle,
enic_intr_handler, (void *)enic->rte_dev);
- rte_intr_enable(&(enic->pdev->intr_handle));
+ rte_intr_enable(enic->pdev->intr_handle);
/* Unmask LSC interrupt */
vnic_intr_unmask(&enic->intr[ENICPMD_LSC_INTR_OFFSET]);
unsigned int mbuf_size, mbufs_per_pkt;
unsigned int nb_sop_desc, nb_data_desc;
uint16_t min_sop, max_sop, min_data, max_data;
- uint32_t max_rx_pkt_len;
+ uint32_t max_rx_pktlen;
/*
* Representor uses a reserved PF queue. Translate representor
mbuf_size = (uint16_t)(rte_pktmbuf_data_room_size(mp) -
RTE_PKTMBUF_HEADROOM);
- /* max_rx_pkt_len includes the ethernet header and CRC. */
- max_rx_pkt_len = enic->rte_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+ /* max_rx_pktlen includes the ethernet header and CRC. */
+ max_rx_pktlen = enic_mtu_to_max_rx_pktlen(enic->rte_dev->data->mtu);
if (enic->rte_dev->data->dev_conf.rxmode.offloads &
- DEV_RX_OFFLOAD_SCATTER) {
+ RTE_ETH_RX_OFFLOAD_SCATTER) {
dev_info(enic, "Rq %u Scatter rx mode enabled\n", queue_idx);
/* ceil((max pkt len)/mbuf_size) */
- mbufs_per_pkt = (max_rx_pkt_len + mbuf_size - 1) / mbuf_size;
+ mbufs_per_pkt = (max_rx_pktlen + mbuf_size - 1) / mbuf_size;
} else {
dev_info(enic, "Scatter rx mode disabled\n");
mbufs_per_pkt = 1;
- if (max_rx_pkt_len > mbuf_size) {
+ if (max_rx_pktlen > mbuf_size) {
dev_warning(enic, "The maximum Rx packet size (%u) is"
" larger than the mbuf size (%u), and"
" scatter is disabled. Larger packets will"
" be truncated.\n",
- max_rx_pkt_len, mbuf_size);
+ max_rx_pktlen, mbuf_size);
}
}
rq_sop->data_queue_enable = 1;
rq_data->in_use = 1;
/*
- * HW does not directly support rxmode.max_rx_pkt_len. HW always
+ * HW does not directly support MTU. HW always
* receives packet sizes up to the "max" MTU.
* If not using scatter, we can achieve the effect of dropping
* larger packets by reducing the size of posted buffers.
* See enic_alloc_rx_queue_mbufs().
*/
- if (max_rx_pkt_len <
- enic_mtu_to_max_rx_pktlen(enic->max_mtu)) {
- dev_warning(enic, "rxmode.max_rx_pkt_len is ignored"
- " when scatter rx mode is in use.\n");
+ if (enic->rte_dev->data->mtu < enic->max_mtu) {
+ dev_warning(enic,
+ "mtu is ignored when scatter rx mode is in use.\n");
}
} else {
dev_info(enic, "Rq %u Scatter rx mode not being used\n",
if (mbufs_per_pkt > 1) {
dev_info(enic, "For max packet size %u and mbuf size %u valid"
" rx descriptor range is %u to %u\n",
- max_rx_pkt_len, mbuf_size, min_sop + min_data,
+ max_rx_pktlen, mbuf_size, min_sop + min_data,
max_sop + max_data);
}
dev_info(enic, "Using %d rx descriptors (sop %d, data %d)\n",
(void)vnic_intr_masked(&enic->intr[i]); /* flush write */
}
enic_rxq_intr_deinit(enic);
- rte_intr_disable(&enic->pdev->intr_handle);
- rte_intr_callback_unregister(&enic->pdev->intr_handle,
+ rte_intr_disable(enic->pdev->intr_handle);
+ rte_intr_callback_unregister(enic->pdev->intr_handle,
enic_intr_handler,
(void *)enic->rte_dev);
}
/* If we were using interrupts, set the interrupt vector to -1
- * to disable interrupts. We are not disabling link notifcations,
+ * to disable interrupts. We are not disabling link notifications,
* though, as we want the polling of link status to continue working.
*/
if (enic->rte_dev->data->dev_conf.intr_conf.lsc)
rss_hash_type = 0;
rss_hf = rss_conf->rss_hf & enic->flow_type_rss_offloads;
if (enic->rq_count > 1 &&
- (eth_dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG) &&
+ (eth_dev->data->dev_conf.rxmode.mq_mode & RTE_ETH_MQ_RX_RSS_FLAG) &&
rss_hf != 0) {
rss_enable = 1;
- if (rss_hf & (ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
- ETH_RSS_NONFRAG_IPV4_OTHER))
+ if (rss_hf & (RTE_ETH_RSS_IPV4 | RTE_ETH_RSS_FRAG_IPV4 |
+ RTE_ETH_RSS_NONFRAG_IPV4_OTHER))
rss_hash_type |= NIC_CFG_RSS_HASH_TYPE_IPV4;
- if (rss_hf & ETH_RSS_NONFRAG_IPV4_TCP)
+ if (rss_hf & RTE_ETH_RSS_NONFRAG_IPV4_TCP)
rss_hash_type |= NIC_CFG_RSS_HASH_TYPE_TCP_IPV4;
- if (rss_hf & ETH_RSS_NONFRAG_IPV4_UDP) {
+ if (rss_hf & RTE_ETH_RSS_NONFRAG_IPV4_UDP) {
rss_hash_type |= NIC_CFG_RSS_HASH_TYPE_UDP_IPV4;
if (enic->udp_rss_weak) {
/*
rss_hash_type |= NIC_CFG_RSS_HASH_TYPE_TCP_IPV4;
}
}
- if (rss_hf & (ETH_RSS_IPV6 | ETH_RSS_IPV6_EX |
- ETH_RSS_FRAG_IPV6 | ETH_RSS_NONFRAG_IPV6_OTHER))
+ if (rss_hf & (RTE_ETH_RSS_IPV6 | RTE_ETH_RSS_IPV6_EX |
+ RTE_ETH_RSS_FRAG_IPV6 | RTE_ETH_RSS_NONFRAG_IPV6_OTHER))
rss_hash_type |= NIC_CFG_RSS_HASH_TYPE_IPV6;
- if (rss_hf & (ETH_RSS_NONFRAG_IPV6_TCP | ETH_RSS_IPV6_TCP_EX))
+ if (rss_hf & (RTE_ETH_RSS_NONFRAG_IPV6_TCP | RTE_ETH_RSS_IPV6_TCP_EX))
rss_hash_type |= NIC_CFG_RSS_HASH_TYPE_TCP_IPV6;
- if (rss_hf & (ETH_RSS_NONFRAG_IPV6_UDP | ETH_RSS_IPV6_UDP_EX)) {
+ if (rss_hf & (RTE_ETH_RSS_NONFRAG_IPV6_UDP | RTE_ETH_RSS_IPV6_UDP_EX)) {
rss_hash_type |= NIC_CFG_RSS_HASH_TYPE_UDP_IPV6;
if (enic->udp_rss_weak)
rss_hash_type |= NIC_CFG_RSS_HASH_TYPE_TCP_IPV6;
"MTU (%u) is greater than value configured in NIC (%u)\n",
new_mtu, config_mtu);
- /* Update the MTU and maximum packet length */
- eth_dev->data->mtu = new_mtu;
- eth_dev->data->dev_conf.rxmode.max_rx_pkt_len =
- enic_mtu_to_max_rx_pktlen(new_mtu);
-
/*
* If the device has not started (enic_enable), nothing to do.
* Later, enic_enable() will set up RQs reflecting the new maximum
}
/* replace Rx function with a no-op to avoid getting stale pkts */
- eth_dev->rx_pkt_burst = enic_dummy_recv_pkts;
+ eth_dev->rx_pkt_burst = rte_eth_pkt_burst_dummy;
+ rte_eth_fp_ops[enic->port_id].rx_pkt_burst = eth_dev->rx_pkt_burst;
rte_mb();
/* Allow time for threads to exit the real Rx function. */
/* put back the real receive function */
rte_mb();
enic_pick_rx_handler(eth_dev);
+ rte_eth_fp_ops[enic->port_id].rx_pkt_burst = eth_dev->rx_pkt_burst;
rte_mb();
/* restart Rx traffic */
return -EINVAL;
}
enic->tx_offload_capa |=
- DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
- (enic->geneve ? DEV_TX_OFFLOAD_GENEVE_TNL_TSO : 0) |
- (enic->vxlan ? DEV_TX_OFFLOAD_VXLAN_TNL_TSO : 0);
+ RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM |
+ (enic->geneve ? RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO : 0) |
+ (enic->vxlan ? RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO : 0);
enic->tx_offload_mask |=
- PKT_TX_OUTER_IPV6 |
- PKT_TX_OUTER_IPV4 |
- PKT_TX_OUTER_IP_CKSUM |
- PKT_TX_TUNNEL_MASK;
+ RTE_MBUF_F_TX_OUTER_IPV6 |
+ RTE_MBUF_F_TX_OUTER_IPV4 |
+ RTE_MBUF_F_TX_OUTER_IP_CKSUM |
+ RTE_MBUF_F_TX_TUNNEL_MASK;
enic->overlay_offload = true;
if (enic->vxlan && enic->geneve)