fm10k/base: fix TLV structures alignment
[dpdk.git] / drivers / net / fm10k / base / fm10k_pf.c
index 3ee88b6..456fe64 100644 (file)
@@ -216,6 +216,7 @@ STATIC s32 fm10k_init_hw_pf(struct fm10k_hw *hw)
        return FM10K_SUCCESS;
 }
 
+#ifndef NO_IS_SLOT_APPROPRIATE_CHECK
 /**
  *  fm10k_is_slot_appropriate_pf - Indicate appropriate slot for this SKU
  *  @hw: pointer to hardware structure
@@ -231,6 +232,7 @@ STATIC bool fm10k_is_slot_appropriate_pf(struct fm10k_hw *hw)
               (hw->bus.width == hw->bus_caps.width);
 }
 
+#endif
 /**
  *  fm10k_update_vlan_pf - Update status of VLAN ID in VLAN filter table
  *  @hw: pointer to hardware structure
@@ -300,7 +302,6 @@ STATIC s32 fm10k_read_mac_addr_pf(struct fm10k_hw *hw)
 {
        u8 perm_addr[ETH_ALEN];
        u32 serial_num;
-       int i;
 
        DEBUGFUNC("fm10k_read_mac_addr_pf");
 
@@ -324,10 +325,8 @@ STATIC s32 fm10k_read_mac_addr_pf(struct fm10k_hw *hw)
        perm_addr[4] = (u8)(serial_num >> 8);
        perm_addr[5] = (u8)(serial_num);
 
-       for (i = 0; i < ETH_ALEN; i++) {
-               hw->mac.perm_addr[i] = perm_addr[i];
-               hw->mac.addr[i] = perm_addr[i];
-       }
+       memcpy(hw->mac.perm_addr, perm_addr, ETH_ALEN);
+       memcpy(hw->mac.addr, perm_addr, ETH_ALEN);
 
        return FM10K_SUCCESS;
 }
@@ -576,8 +575,8 @@ STATIC s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw,
                return FM10K_ERR_PARAM;
 
        /* determine count of VSIs and queues */
-       queue_count = 1 << (dglort->rss_l + dglort->pc_l);
-       vsi_count = 1 << (dglort->vsi_l + dglort->queue_l);
+       queue_count = BIT(dglort->rss_l + dglort->pc_l);
+       vsi_count = BIT(dglort->vsi_l + dglort->queue_l);
        glort = dglort->glort;
        q_idx = dglort->queue_b;
 
@@ -593,8 +592,8 @@ STATIC s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw,
        }
 
        /* determine count of PCs and queues */
-       queue_count = 1 << (dglort->queue_l + dglort->rss_l + dglort->vsi_l);
-       pc_count = 1 << dglort->pc_l;
+       queue_count = BIT(dglort->queue_l + dglort->rss_l + dglort->vsi_l);
+       pc_count = BIT(dglort->pc_l);
 
        /* configure PC for Tx queues */
        for (pc = 0; pc < pc_count; pc++) {
@@ -971,7 +970,7 @@ err_out:
        txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) |
                  FM10K_TXQCTL_VF | vf_idx;
 
-       /* assign VID */
+       /* assign VLAN ID */
        for (i = 0; i < queues_per_pool; i++)
                FM10K_WRITE_REG(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl);
 
@@ -1001,7 +1000,7 @@ STATIC s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
                return FM10K_ERR_PARAM;
 
        /* clear event notification of VF FLR */
-       FM10K_WRITE_REG(hw, FM10K_PFVFLREC(vf_idx / 32), 1 << (vf_idx % 32));
+       FM10K_WRITE_REG(hw, FM10K_PFVFLREC(vf_idx / 32), BIT(vf_idx % 32));
 
        /* force timeout and then disconnect the mailbox */
        vf_info->mbx.timeout = 0;
@@ -1106,7 +1105,7 @@ STATIC s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
                FM10K_WRITE_REG(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx + i);
        }
 
-       /* repeat the first ring for all of the remaining VF rings */
+       /* repeat the first ring for all the remaining VF rings */
        for (i = queues_per_pool; i < qmap_stride; i++) {
                FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx);
                FM10K_WRITE_REG(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx);
@@ -1216,12 +1215,12 @@ s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 **results,
 }
 
 /**
- * fm10k_iov_select_vid - Select correct default vid
+ * fm10k_iov_select_vid - Select correct default VLAN ID
  * @hw: Pointer to hardware structure
- * @vid: vid to correct
+ * @vid: VLAN ID to correct
  *
- * Will report an error if vid is out of range. For vid = 0, it will return
- * either the pf_vid or sw_vid depending on which one is set.
+ * Will report an error if the VLAN ID is out of range. For VID = 0, it will
+ * return either the pf_vid or sw_vid depending on which one is set.
  */
 STATIC s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid)
 {
@@ -1247,9 +1246,9 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
                              struct fm10k_mbx_info *mbx)
 {
        struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
-       int err = FM10K_SUCCESS;
        u8 mac[ETH_ALEN];
        u32 *result;
+       int err = FM10K_SUCCESS;
        bool set;
        u16 vlan;
        u32 vid;
@@ -1417,7 +1416,7 @@ s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results,
                mode = fm10k_iov_supported_xcast_mode_pf(vf_info, mode);
 
                /* if mode is not currently enabled, enable it */
-               if (!(FM10K_VF_FLAG_ENABLED(vf_info) & (1 << mode)))
+               if (!(FM10K_VF_FLAG_ENABLED(vf_info) & BIT(mode)))
                        fm10k_update_xcast_mode_pf(hw, vf_info->glort, mode);
 
                /* swap mode back to a bit flag */
@@ -1428,10 +1427,10 @@ s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results,
                        err = fm10k_update_lport_state_pf(hw, vf_info->glort,
                                                          1, false);
 
-               /* need to clear VF_FLAG_ENABLED in order to ensure that we
-                * actually re-enable the lport state below. Note that this
-                * has no impact if VF is already disabled, as the flags are
-                * already zeroed.
+               /* we need to clear VF_FLAG_ENABLED flags in order to ensure
+                * that we actually re-enable the LPORT state below. Note that
+                * this has no impact if the VF is already disabled, as the
+                * flags are already cleared.
                 */
                if (!err)
                        vf_info->vf_flags = FM10K_VF_FLAG_CAPABLE(vf_info);
@@ -1784,7 +1783,7 @@ static s32 fm10k_msg_update_pvid_pf(struct fm10k_hw *hw, u32 **results,
        if (!fm10k_glort_valid_pf(hw, glort))
                return FM10K_ERR_PARAM;
 
-       /* verify VID is valid */
+       /* verify VLAN ID is valid */
        if (pvid >= FM10K_VLAN_TABLE_VID_MAX)
                return FM10K_ERR_PARAM;
 
@@ -2067,7 +2066,9 @@ s32 fm10k_init_ops_pf(struct fm10k_hw *hw)
        mac->ops.init_hw = &fm10k_init_hw_pf;
        mac->ops.start_hw = &fm10k_start_hw_generic;
        mac->ops.stop_hw = &fm10k_stop_hw_generic;
+#ifndef NO_IS_SLOT_APPROPRIATE_CHECK
        mac->ops.is_slot_appropriate = &fm10k_is_slot_appropriate_pf;
+#endif
        mac->ops.update_vlan = &fm10k_update_vlan_pf;
        mac->ops.read_mac_addr = &fm10k_read_mac_addr_pf;
        mac->ops.update_uc_addr = &fm10k_update_uc_addr_pf;