-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2013-2015 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2013-2015 Intel Corporation
*/
#ifndef _FM10K_H_
#define FM10K_MAX_RX_DESC (FM10K_MAX_RX_RING_SZ / sizeof(union fm10k_rx_desc))
#define FM10K_MAX_TX_DESC (FM10K_MAX_TX_RING_SZ / sizeof(struct fm10k_tx_desc))
+#define FM10K_TX_MAX_SEG UINT8_MAX
+#define FM10K_TX_MAX_MTU_SEG UINT8_MAX
+
/*
- * byte aligment for HW RX data buffer
+ * byte alignment for HW RX data buffer
* Datasheet requires RX buffer addresses shall either be 512-byte aligned or
* be 8-byte aligned but without crossing host memory pages (4KB alignment
* boundaries). Satisfy first option.
RTE_MIN(((txq)->nb_desc - 2), (txq)->free_thresh)
#define FM10K_TX_RS_THRESH_DIV(txq) ((txq)->nb_desc)
-#define FM10K_VLAN_TAG_SIZE 4
-
/* Maximum number of MAC addresses per PF/VF */
-#define FM10K_MAX_MACADDR_NUM 1
+#define FM10K_MAX_MACADDR_NUM 64
#define FM10K_UINT32_BIT_SIZE (CHAR_BIT * sizeof(uint32_t))
#define FM10K_VFTA_SIZE (4096 / FM10K_UINT32_BIT_SIZE)
#define FM10K_VFTA_BIT(vlan_id) (1 << ((vlan_id) & 0x1F))
#define FM10K_VFTA_IDX(vlan_id) ((vlan_id) >> 5)
+#define RTE_FM10K_RXQ_REARM_THRESH 32
+#define RTE_FM10K_VPMD_TX_BURST 32
+#define RTE_FM10K_MAX_RX_BURST RTE_FM10K_RXQ_REARM_THRESH
+#define RTE_FM10K_TX_MAX_FREE_BUF_SZ 64
+#define RTE_FM10K_DESCS_PER_LOOP 4
+
+#define FM10K_MISC_VEC_ID RTE_INTR_VEC_ZERO_OFFSET
+#define FM10K_RX_VEC_START RTE_INTR_VEC_RXTX_OFFSET
+
struct fm10k_macvlan_filter_info {
uint16_t vlan_num; /* Total VLAN number */
+ uint16_t mac_num; /* Total mac number */
+ uint16_t nb_queue_pools; /* Active queue pools number */
+ /* VMDQ ID for each MAC address */
+ uint8_t mac_vmdq_id[FM10K_MAX_MACADDR_NUM];
uint32_t vfta[FM10K_VFTA_SIZE]; /* VLAN bitmap */
};
/* Protect the mailbox to avoid race condition */
rte_spinlock_t mbx_lock;
struct fm10k_macvlan_filter_info macvlan;
+ /* Flag to indicate if RX vector conditions satisfied */
+ bool rx_vec_allowed;
+ bool sm_down;
};
/*
struct rte_mempool *mp;
struct rte_mbuf **sw_ring;
volatile union fm10k_rx_desc *hw_ring;
- struct rte_mbuf *pkt_first_seg; /**< First segment of current packet. */
- struct rte_mbuf *pkt_last_seg; /**< Last segment of current packet. */
+ struct rte_mbuf *pkt_first_seg; /* First segment of current packet. */
+ struct rte_mbuf *pkt_last_seg; /* Last segment of current packet. */
uint64_t hw_ring_phys_addr;
+ uint64_t mbuf_initializer; /* value to init mbufs */
+ /* need to alloc dummy mbuf, for wraparound when scanning hw ring */
+ struct rte_mbuf fake_mbuf;
uint16_t next_dd;
uint16_t next_alloc;
uint16_t next_trigger;
uint16_t alloc_thresh;
volatile uint32_t *tail_ptr;
uint16_t nb_desc;
+ /* Number of faked desc added at the tail for Vector RX function */
+ uint16_t nb_fake_desc;
uint16_t queue_id;
- uint8_t port_id;
+ /* Below 2 fields only valid in case vPMD is applied. */
+ uint16_t rxrearm_nb; /* number of remaining to be re-armed */
+ uint16_t rxrearm_start; /* the idx we start the re-arming from */
+ uint16_t rx_using_sse; /* indicates that vector RX is in use */
+ uint16_t port_id;
uint8_t drop_en;
- uint8_t rx_deferred_start; /**< don't start this queue in dev start. */
+ uint8_t rx_deferred_start; /* don't start this queue in dev start. */
+ uint16_t rx_ftag_en; /* indicates FTAG RX supported */
+ uint64_t offloads; /* offloads of RTE_ETH_RX_OFFLOAD_* */
};
/*
uint16_t *endp;
};
+struct fm10k_txq_ops;
+
struct fm10k_tx_queue {
struct rte_mbuf **sw_ring;
struct fm10k_tx_desc *hw_ring;
uint64_t hw_ring_phys_addr;
struct fifo rs_tracker;
+ const struct fm10k_txq_ops *ops; /* txq ops */
uint16_t last_free;
uint16_t next_free;
uint16_t nb_free;
uint16_t nb_used;
- uint16_t free_trigger;
uint16_t free_thresh;
uint16_t rs_thresh;
+ /* Below 2 fields only valid in case vPMD is applied. */
+ uint16_t next_rs; /* Next pos to set RS flag */
+ uint16_t next_dd; /* Next pos to check DD flag */
volatile uint32_t *tail_ptr;
+ uint64_t offloads; /* Offloads of RTE_ETH_TX_OFFLOAD_* */
uint16_t nb_desc;
- uint8_t port_id;
- uint8_t tx_deferred_start; /** < don't start this queue in dev start. */
+ uint16_t port_id;
+ uint8_t tx_deferred_start; /** don't start this queue in dev start. */
uint16_t queue_id;
+ uint16_t tx_ftag_en; /* indicates FTAG TX supported */
+};
+
+struct fm10k_txq_ops {
+ void (*reset)(struct fm10k_tx_queue *txq);
};
#define MBUF_DMA_ADDR(mb) \
- ((uint64_t) ((mb)->buf_physaddr + (mb)->data_off))
+ ((uint64_t) ((mb)->buf_iova + (mb)->data_off))
/* enforce 512B alignment on default Rx DMA addresses */
#define MBUF_DMA_ADDR_DEFAULT(mb) \
- ((uint64_t) RTE_ALIGN(((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM),\
+ ((uint64_t) RTE_ALIGN(((mb)->buf_iova + RTE_PKTMBUF_HEADROOM),\
FM10K_RX_DATABUF_ALIGN))
static inline void fifo_reset(struct fifo *fifo, uint32_t len)
}
static inline void
-fm10k_pktmbuf_reset(struct rte_mbuf *mb, uint8_t in_port)
+fm10k_pktmbuf_reset(struct rte_mbuf *mb, uint16_t in_port)
{
rte_mbuf_refcnt_set(mb, 1);
mb->next = NULL;
/* 8B aligned, and max Ethernet frame would not cross a 4KB boundary? */
if (RTE_ALIGN(addr, 8) == addr) {
boundary1 = RTE_ALIGN_FLOOR(addr, 4096);
- boundary2 = RTE_ALIGN_FLOOR(addr + ETHER_MAX_VLAN_FRAME_LEN,
+ boundary2 = RTE_ALIGN_FLOOR(addr + RTE_ETHER_MAX_VLAN_FRAME_LEN,
4096);
if (boundary1 == boundary2)
return 1;
uint16_t fm10k_recv_scattered_pkts(void *rx_queue,
struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint32_t
+fm10k_dev_rx_queue_count(void *rx_queue);
+
+int
+fm10k_dev_rx_descriptor_status(void *rx_queue, uint16_t offset);
+
+int
+fm10k_dev_tx_descriptor_status(void *rx_queue, uint16_t offset);
+
+
uint16_t fm10k_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts);
+
+uint16_t fm10k_prep_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+
+int fm10k_rxq_vec_setup(struct fm10k_rx_queue *rxq);
+int fm10k_rx_vec_condition_check(struct rte_eth_dev *);
+void fm10k_rx_queue_release_mbufs_vec(struct fm10k_rx_queue *rxq);
+uint16_t fm10k_recv_pkts_vec(void *, struct rte_mbuf **, uint16_t);
+uint16_t fm10k_recv_scattered_pkts_vec(void *, struct rte_mbuf **,
+ uint16_t);
+uint16_t fm10k_xmit_fixed_burst_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+void fm10k_txq_vec_setup(struct fm10k_tx_queue *txq);
+int fm10k_tx_vec_condition_check(struct fm10k_tx_queue *txq);
+
#endif