net/hns3: fix traffic management

[dpdk.git] / drivers / net / hns3 / hns3_cmd.h

diff --git a/drivers/net/hns3/hns3_cmd.h b/drivers/net/hns3/hns3_cmd.h
index 2af4db7..0c9b8fc 100644 (file)
--- a/drivers/net/hns3/hns3_cmd.h
+++ b/drivers/net/hns3/hns3_cmd.h
@@ -108,6 +108,7 @@ enum hns3_opcode_type {
 
        /* MAC command */
        HNS3_OPC_CONFIG_MAC_MODE        = 0x0301,
+       HNS3_OPC_CONFIG_AN_MODE         = 0x0304,
        HNS3_OPC_QUERY_LINK_STATUS      = 0x0307,
        HNS3_OPC_CONFIG_MAX_FRM_SIZE    = 0x0308,
        HNS3_OPC_CONFIG_SPEED_DUP       = 0x0309,
@@ -161,6 +162,9 @@ enum hns3_opcode_type {
        HNS3_OPC_TM_INTERNAL_CNT        = 0x0851,
        HNS3_OPC_TM_INTERNAL_STS_1      = 0x0852,
 
+       HNS3_OPC_TM_PORT_LIMIT_RATE     = 0x0870,
+       HNS3_OPC_TM_TC_LIMIT_RATE       = 0x0871,
+
        /* Mailbox cmd */
        HNS3_OPC_MBX_VF_TO_PF           = 0x2001,
 
@@ -230,7 +234,7 @@ enum hns3_opcode_type {
        /* SFP command */
        HNS3_OPC_GET_SFP_EEPROM         = 0x7100,
        HNS3_OPC_GET_SFP_EXIST          = 0x7101,
-       HNS3_OPC_SFP_GET_SPEED          = 0x7104,
+       HNS3_OPC_GET_SFP_INFO           = 0x7104,
 
        /* Interrupts commands */
        HNS3_OPC_ADD_RING_TO_VECTOR     = 0x1503,
@@ -251,6 +255,8 @@ enum hns3_opcode_type {
        HNS3_OPC_QUERY_MSIX_INT_STS_BD_NUM      = 0x1513,
        HNS3_OPC_QUERY_CLEAR_ALL_MPF_MSIX_INT   = 0x1514,
        HNS3_OPC_QUERY_CLEAR_ALL_PF_MSIX_INT    = 0x1515,
+       HNS3_OPC_QUERY_ALL_ERR_BD_NUM           = 0x1516,
+       HNS3_OPC_QUERY_ALL_ERR_INFO             = 0x1517,
        HNS3_OPC_IGU_EGU_TNL_INT_EN             = 0x1803,
        HNS3_OPC_IGU_COMMON_INT_EN              = 0x1806,
        HNS3_OPC_TM_QCN_MEM_INT_CFG             = 0x1A14,
@@ -303,22 +309,20 @@ struct hns3_rx_priv_buff_cmd {
 #define HNS3_FW_VERSION_BYTE0_M                GENMASK(7, 0)
 
 enum HNS3_CAPS_BITS {
-       HNS3_CAPS_UDP_GSO_B,
-       HNS3_CAPS_ATR_B,
-       HNS3_CAPS_FD_QUEUE_REGION_B,
+       /*
+        * The following capability index definitions must be the same as those
+        * of the firmware.
+        */
+       HNS3_CAPS_FD_QUEUE_REGION_B = 2,
        HNS3_CAPS_PTP_B,
-       HNS3_CAPS_INT_QL_B,
-       HNS3_CAPS_SIMPLE_BD_B,
-       HNS3_CAPS_TX_PUSH_B,
-       HNS3_CAPS_PHY_IMP_B,
+       HNS3_CAPS_PHY_IMP_B = 7,
        HNS3_CAPS_TQP_TXRX_INDEP_B,
        HNS3_CAPS_HW_PAD_B,
        HNS3_CAPS_STASH_B,
        HNS3_CAPS_UDP_TUNNEL_CSUM_B,
        HNS3_CAPS_RAS_IMP_B,
-       HNS3_CAPS_FEC_B,
-       HNS3_CAPS_PAUSE_B,
-       HNS3_CAPS_RXD_ADV_LAYOUT_B,
+       HNS3_CAPS_RXD_ADV_LAYOUT_B = 15,
+       HNS3_CAPS_TM_B = 17,
 };
 
 enum HNS3_API_CAP_BITS {
@@ -457,8 +461,6 @@ struct hns3_umv_spc_alc_cmd {
 #define HNS3_CFG_RD_LEN_BYTES          16
 #define HNS3_CFG_RD_LEN_UNIT           4
 
-#define HNS3_CFG_VMDQ_S                        0
-#define HNS3_CFG_VMDQ_M                        GENMASK(7, 0)
 #define HNS3_CFG_TC_NUM_S              8
 #define HNS3_CFG_TC_NUM_M              GENMASK(15, 8)
 #define HNS3_CFG_TQP_DESC_N_S          16
@@ -767,13 +769,6 @@ struct hns3_config_auto_neg_cmd {
        uint8_t   rsv[20];
 };
 
-#define HNS3_MAC_CFG_FEC_AUTO_EN_B     0
-#define HNS3_MAC_CFG_FEC_MODE_S                1
-#define HNS3_MAC_CFG_FEC_MODE_M        GENMASK(3, 1)
-#define HNS3_MAC_FEC_OFF               0
-#define HNS3_MAC_FEC_BASER             1
-#define HNS3_MAC_FEC_RS                        2
-
 #define HNS3_SFP_INFO_BD0_LEN  20UL
 #define HNS3_SFP_INFO_BDX_LEN  24UL
 
@@ -788,14 +783,36 @@ struct hns3_sfp_type {
        uint8_t ext_type;
 };
 
-struct hns3_sfp_speed_cmd {
-       uint32_t  sfp_speed;
-       uint8_t   query_type; /* 0: sfp speed, 1: active fec */
-       uint8_t   active_fec; /* current FEC mode */
-       uint16_t  rsv1;
-       uint32_t  rsv2[4];
+/* Bitmap flags in supported_speed */
+#define HNS3_FIBER_LINK_SPEED_1G_BIT           BIT(0)
+#define HNS3_FIBER_LINK_SPEED_10G_BIT          BIT(1)
+#define HNS3_FIBER_LINK_SPEED_25G_BIT          BIT(2)
+#define HNS3_FIBER_LINK_SPEED_50G_BIT          BIT(3)
+#define HNS3_FIBER_LINK_SPEED_100G_BIT         BIT(4)
+#define HNS3_FIBER_LINK_SPEED_40G_BIT          BIT(5)
+#define HNS3_FIBER_LINK_SPEED_100M_BIT         BIT(6)
+#define HNS3_FIBER_LINK_SPEED_10M_BIT          BIT(7)
+#define HNS3_FIBER_LINK_SPEED_200G_BIT         BIT(8)
+
+struct hns3_sfp_info_cmd {
+       uint32_t sfp_speed;
+       uint8_t query_type; /* 0: sfp speed, 1: active */
+       uint8_t active_fec; /* current FEC mode */
+       uint8_t autoneg; /* current autoneg state */
+       /* 0: not support autoneg, 1: support autoneg */
+       uint8_t autoneg_ability;
+       uint32_t supported_speed; /* speed supported by current media */
+       uint32_t module_type;
+       uint8_t rsv1[8];
 };
 
+#define HNS3_MAC_CFG_FEC_AUTO_EN_B     0
+#define HNS3_MAC_CFG_FEC_MODE_S                1
+#define HNS3_MAC_CFG_FEC_MODE_M        GENMASK(3, 1)
+#define HNS3_MAC_FEC_OFF               0
+#define HNS3_MAC_FEC_BASER             1
+#define HNS3_MAC_FEC_RS                        2
+
 /* Configure FEC mode, opcode:0x031A */
 struct hns3_config_fec_cmd {
        uint8_t fec_mode;