net/hns3: support PF device with copper PHYs

[dpdk.git] / drivers / net / hns3 / hns3_cmd.h

diff --git a/drivers/net/hns3/hns3_cmd.h b/drivers/net/hns3/hns3_cmd.h
index 5640fe4..7f567cb 100644 (file)
--- a/drivers/net/hns3/hns3_cmd.h
+++ b/drivers/net/hns3/hns3_cmd.h
@@ -8,6 +8,7 @@
 #include <stdint.h>
 
 #define HNS3_CMDQ_TX_TIMEOUT           30000
+#define HNS3_CMDQ_CLEAR_WAIT_TIME      200
 #define HNS3_CMDQ_RX_INVLD_B           0
 #define HNS3_CMDQ_RX_OUTVLD_B          1
 #define HNS3_CMD_DESC_ALIGNMENT                4096
@@ -94,6 +95,19 @@ enum hns3_opcode_type {
        HNS3_OPC_QUERY_REG_NUM          = 0x0040,
        HNS3_OPC_QUERY_32_BIT_REG       = 0x0041,
        HNS3_OPC_QUERY_64_BIT_REG       = 0x0042,
+       HNS3_OPC_DFX_BD_NUM             = 0x0043,
+       HNS3_OPC_DFX_BIOS_COMMON_REG    = 0x0044,
+       HNS3_OPC_DFX_SSU_REG_0          = 0x0045,
+       HNS3_OPC_DFX_SSU_REG_1          = 0x0046,
+       HNS3_OPC_DFX_IGU_EGU_REG        = 0x0047,
+       HNS3_OPC_DFX_RPU_REG_0          = 0x0048,
+       HNS3_OPC_DFX_RPU_REG_1          = 0x0049,
+       HNS3_OPC_DFX_NCSI_REG           = 0x004A,
+       HNS3_OPC_DFX_RTC_REG            = 0x004B,
+       HNS3_OPC_DFX_PPP_REG            = 0x004C,
+       HNS3_OPC_DFX_RCB_REG            = 0x004D,
+       HNS3_OPC_DFX_TQP_REG            = 0x004E,
+       HNS3_OPC_DFX_SSU_REG_2          = 0x004F,
 
        HNS3_OPC_QUERY_DEV_SPECS        = 0x0050,
 
@@ -208,8 +222,12 @@ enum hns3_opcode_type {
 
        /* Firmware stats command */
        HNS3_OPC_FIRMWARE_COMPAT_CFG    = 0x701A,
+       /* Firmware control phy command */
+       HNS3_OPC_PHY_PARAM_CFG          = 0x7025,
 
        /* SFP command */
+       HNS3_OPC_GET_SFP_EEPROM         = 0x7100,
+       HNS3_OPC_GET_SFP_EXIST          = 0x7101,
        HNS3_OPC_SFP_GET_SPEED          = 0x7104,
 
        /* Interrupts commands */
@@ -643,11 +661,46 @@ enum hns3_promisc_type {
 
 #define HNS3_LINK_EVENT_REPORT_EN_B    0
 #define HNS3_NCSI_ERROR_REPORT_EN_B    1
+#define HNS3_FIRMWARE_PHY_DRIVER_EN_B  2
 struct hns3_firmware_compat_cmd {
        uint32_t compat;
        uint8_t rsv[20];
 };
 
+/* Bitmap flags in supported, advertising and lp_advertising */
+#define HNS3_PHY_LINK_SPEED_10M_HD_BIT         BIT(0)
+#define HNS3_PHY_LINK_SPEED_10M_BIT            BIT(1)
+#define HNS3_PHY_LINK_SPEED_100M_HD_BIT                BIT(2)
+#define HNS3_PHY_LINK_SPEED_100M_BIT           BIT(3)
+#define HNS3_PHY_LINK_MODE_AUTONEG_BIT         BIT(6)
+#define HNS3_PHY_LINK_MODE_PAUSE_BIT           BIT(13)
+#define HNS3_PHY_LINK_MODE_ASYM_PAUSE_BIT      BIT(14)
+
+#define HNS3_PHY_PARAM_CFG_BD_NUM      2
+struct hns3_phy_params_bd0_cmd {
+       uint32_t speed;
+#define HNS3_PHY_DUPLEX_CFG_B          0
+       uint8_t duplex;
+#define HNS3_PHY_AUTONEG_CFG_B 0
+       uint8_t autoneg;
+       uint8_t eth_tp_mdix;
+       uint8_t eth_tp_mdix_ctrl;
+       uint8_t port;
+       uint8_t transceiver;
+       uint8_t phy_address;
+       uint8_t rsv;
+       uint32_t supported;
+       uint32_t advertising;
+       uint32_t lp_advertising;
+};
+
+struct hns3_phy_params_bd1_cmd {
+       uint8_t master_slave_cfg;
+       uint8_t master_slave_state;
+       uint8_t rsv1[2];
+       uint32_t rsv2[5];
+};
+
 #define HNS3_MAC_TX_EN_B               6
 #define HNS3_MAC_RX_EN_B               7
 #define HNS3_MAC_PAD_TX_B              11
@@ -713,6 +766,20 @@ struct hns3_config_auto_neg_cmd {
 #define HNS3_MAC_FEC_BASER             1
 #define HNS3_MAC_FEC_RS                        2
 
+#define HNS3_SFP_INFO_BD0_LEN  20UL
+#define HNS3_SFP_INFO_BDX_LEN  24UL
+
+struct hns3_sfp_info_bd0_cmd {
+       uint16_t offset;
+       uint16_t read_len;
+       uint8_t data[HNS3_SFP_INFO_BD0_LEN];
+};
+
+struct hns3_sfp_type {
+       uint8_t type;
+       uint8_t ext_type;
+};
+
 struct hns3_sfp_speed_cmd {
        uint32_t  sfp_speed;
        uint8_t   query_type; /* 0: sfp speed, 1: active fec */
@@ -875,6 +942,13 @@ struct hns3_dev_specs_0_cmd {
        uint32_t max_tm_rate;
 };
 
+struct hns3_query_rpu_cmd {
+       uint32_t tc_queue_num;
+       uint32_t rsv1[2];
+       uint32_t rpu_rx_pkt_drop_cnt;
+       uint32_t rsv2[2];
+};
+
 #define HNS3_MAX_TQP_NUM_HIP08_PF      64
 #define HNS3_DEFAULT_TX_BUF            0x4000    /* 16k  bytes */
 #define HNS3_TOTAL_PKT_BUF             0x108000  /* 1.03125M bytes */