#include "hns3_dcb.h"
#include "hns3_mp.h"
-#define HNS3_DEFAULT_PORT_CONF_BURST_SIZE 32
-#define HNS3_DEFAULT_PORT_CONF_QUEUES_NUM 1
-
#define HNS3_SERVICE_INTERVAL 1000000 /* us */
#define HNS3_SERVICE_QUICK_INTERVAL 10
#define HNS3_INVALID_PVID 0xFFFF
static int hns3_query_dev_fec_info(struct hns3_hw *hw);
static int hns3_do_stop(struct hns3_adapter *hns);
static int hns3_check_port_speed(struct hns3_hw *hw, uint32_t link_speeds);
+static int hns3_cfg_mac_mode(struct hns3_hw *hw, bool enable);
void hns3_ether_format_addr(char *buf, uint16_t size,
const struct rte_ether_addr *ether_addr)
hns3_clear_all_event_cause(struct hns3_hw *hw)
{
uint32_t vector0_int_stats;
- vector0_int_stats = hns3_read_dev(hw, HNS3_VECTOR0_OTHER_INT_STS_REG);
+ vector0_int_stats = hns3_read_dev(hw, HNS3_VECTOR0_OTHER_INT_STS_REG);
if (BIT(HNS3_VECTOR0_IMPRESET_INT_B) & vector0_int_stats)
hns3_warn(hw, "Probe during IMP reset interrupt");
uint32_t status;
int ret;
- /* query and clear mac tnl interruptions */
+ /* query and clear mac tnl interrupt */
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_MAC_TNL_INT, true);
ret = hns3_cmd_send(hw, &desc, 1);
if (ret) {
vector0_int = hns3_read_dev(hw, HNS3_VECTOR0_OTHER_INT_STS_REG);
ras_int = hns3_read_dev(hw, HNS3_RAS_PF_OTHER_INT_STS_REG);
cmdq_int = hns3_read_dev(hw, HNS3_VECTOR0_CMDQ_SRC_REG);
+ hns3_clear_event_cause(hw, event_cause, clearval);
/* vector 0 interrupt is shared with reset and mailbox source events. */
if (event_cause == HNS3_VECTOR0_EVENT_ERR) {
hns3_warn(hw, "received interrupt: vector0_int_stat:0x%x "
vector0_int, ras_int, cmdq_int);
}
- hns3_clear_event_cause(hw, event_cause, clearval);
/* Enable interrupt if it is not cause by reset */
hns3_pf_enable_irq0(hw);
}
* When port base vlan enabled, we use port base vlan as the vlan
* filter condition. In this case, we don't update vlan filter table
* when user add new vlan or remove exist vlan, just update the
- * vlan list. The vlan id in vlan list will be writen in vlan filter
+ * vlan list. The vlan id in vlan list will be written in vlan filter
* table until port base vlan disabled
*/
if (hw->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
ret = hns3_set_vlan_rx_offload_cfg(hns, &rxvlan_cfg);
if (ret) {
- hns3_err(hw, "enable strip rx vtag failed, ret =%d", ret);
+ hns3_err(hw, "%s strip rx vtag failed, ret = %d.",
+ enable ? "enable" : "disable", ret);
return ret;
}
struct rte_ether_addr *oaddr;
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
bool default_addr_setted;
- bool rm_succes = false;
int ret, ret_val;
/*
oaddr);
hns3_warn(hw, "Remove old uc mac address(%s) fail: %d",
mac_str, ret);
- rm_succes = false;
- } else
- rm_succes = true;
+
+ rte_spinlock_unlock(&hw->lock);
+ return ret;
+ }
}
ret = hns3_add_uc_addr_common(hw, mac_addr);
}
err_add_uc_addr:
- if (rm_succes) {
- ret_val = hns3_add_uc_addr_common(hw, oaddr);
- if (ret_val) {
- hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
- oaddr);
- hns3_warn(hw,
- "Failed to restore old uc mac addr(%s): %d",
+ ret_val = hns3_add_uc_addr_common(hw, oaddr);
+ if (ret_val) {
+ hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE, oaddr);
+ hns3_warn(hw, "Failed to restore old uc mac addr(%s): %d",
mac_str, ret_val);
- hw->mac.default_addr_setted = false;
- }
+ hw->mac.default_addr_setted = false;
}
rte_spinlock_unlock(&hw->lock);
return 0;
}
-static int
-hns3_check_dcb_cfg(struct rte_eth_dev *dev)
-{
- struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
- if (!hns3_dev_dcb_supported(hw)) {
- hns3_err(hw, "this port does not support dcb configurations.");
- return -EOPNOTSUPP;
- }
-
- if (hw->current_fc_status == HNS3_FC_STATUS_MAC_PAUSE) {
- hns3_err(hw, "MAC pause enabled, cannot config dcb info.");
- return -EOPNOTSUPP;
- }
-
- return 0;
-}
-
static int
hns3_bind_ring_with_vector(struct hns3_hw *hw, uint16_t vector_id, bool en,
enum hns3_ring_type queue_type, uint16_t queue_id)
return 0;
}
+static int
+hns3_setup_dcb(struct rte_eth_dev *dev)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ if (!hns3_dev_dcb_supported(hw)) {
+ hns3_err(hw, "this port does not support dcb configurations.");
+ return -EOPNOTSUPP;
+ }
+
+ if (hw->current_fc_status == HNS3_FC_STATUS_MAC_PAUSE) {
+ hns3_err(hw, "MAC pause enabled, cannot config dcb info.");
+ return -EOPNOTSUPP;
+ }
+
+ ret = hns3_dcb_configure(hns);
+ if (ret)
+ hns3_err(hw, "failed to config dcb: %d", ret);
+
+ return ret;
+}
+
static int
hns3_check_link_speed(struct hns3_hw *hw, uint32_t link_speeds)
{
/*
* Some hardware doesn't support auto-negotiation, but users may not
* configure link_speeds (default 0), which means auto-negotiation.
- * In this case, a warning message need to be printed, instead of
- * an error.
+ * In this case, it should return success.
*/
if (link_speeds == ETH_LINK_SPEED_AUTONEG &&
- hw->mac.support_autoneg == 0) {
- hns3_warn(hw, "auto-negotiation is not supported, use default fixed speed!");
+ hw->mac.support_autoneg == 0)
return 0;
- }
if (link_speeds != ETH_LINK_SPEED_AUTONEG) {
ret = hns3_check_port_speed(hw, link_speeds);
* work as usual. But these fake queues are imperceptible, and can not
* be used by upper applications.
*/
- if (!hns3_dev_indep_txrx_supported(hw)) {
- ret = hns3_set_fake_rx_or_tx_queues(dev, nb_rx_q, nb_tx_q);
- if (ret) {
- hns3_err(hw, "fail to set Rx/Tx fake queues, ret = %d.",
- ret);
- return ret;
- }
+ ret = hns3_set_fake_rx_or_tx_queues(dev, nb_rx_q, nb_tx_q);
+ if (ret) {
+ hns3_err(hw, "fail to set Rx/Tx fake queues, ret = %d.", ret);
+ hw->cfg_max_queues = 0;
+ return ret;
}
hw->adapter_state = HNS3_NIC_CONFIGURING;
goto cfg_err;
if ((uint32_t)mq_mode & ETH_MQ_RX_DCB_FLAG) {
- ret = hns3_check_dcb_cfg(dev);
+ ret = hns3_setup_dcb(dev);
if (ret)
goto cfg_err;
}
return 0;
cfg_err:
+ hw->cfg_max_queues = 0;
(void)hns3_set_fake_rx_or_tx_queues(dev, 0, 0);
hw->adapter_state = HNS3_NIC_INITIALIZED;
.offloads = 0,
};
- info->vmdq_queue_num = 0;
-
info->reta_size = hw->rss_ind_tbl_size;
info->hash_key_size = HNS3_RSS_KEY_SIZE;
info->flow_type_rss_offloads = HNS3_ETH_RSS_SUPPORT;
HNS3_FW_VERSION_BYTE1_S),
hns3_get_field(version, HNS3_FW_VERSION_BYTE0_M,
HNS3_FW_VERSION_BYTE0_S));
+ if (ret < 0)
+ return -EINVAL;
+
ret += 1; /* add the size of '\0' */
- if (fw_size < (uint32_t)ret)
+ if (fw_size < (size_t)ret)
return ret;
else
return 0;
case ETH_SPEED_NUM_50G:
case ETH_SPEED_NUM_100G:
case ETH_SPEED_NUM_200G:
- new_link->link_speed = mac->link_speed;
+ if (mac->link_status)
+ new_link->link_speed = mac->link_speed;
break;
default:
if (mac->link_status)
new_link->link_speed = ETH_SPEED_NUM_UNKNOWN;
- else
- new_link->link_speed = ETH_SPEED_NUM_NONE;
break;
}
+ if (!mac->link_status)
+ new_link->link_speed = ETH_SPEED_NUM_NONE;
+
new_link->link_duplex = mac->link_duplex;
new_link->link_status = mac->link_status ? ETH_LINK_UP : ETH_LINK_DOWN;
new_link->link_autoneg = mac->link_autoneg;
struct rte_eth_link new_link;
int ret;
+ /* When port is stopped, report link down. */
+ if (eth_dev->data->dev_started == 0) {
+ new_link.link_autoneg = mac->link_autoneg;
+ new_link.link_duplex = mac->link_duplex;
+ new_link.link_speed = ETH_SPEED_NUM_NONE;
+ new_link.link_status = ETH_LINK_DOWN;
+ goto out;
+ }
+
do {
ret = hns3_update_port_link_info(eth_dev);
if (ret) {
memset(&new_link, 0, sizeof(new_link));
hns3_setup_linkstatus(eth_dev, &new_link);
+out:
return rte_eth_linkstatus_set(eth_dev, &new_link);
}
+static int
+hns3_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ int ret;
+
+ /*
+ * The "tx_pkt_burst" will be restored. But the secondary process does
+ * not support the mechanism for notifying the primary process.
+ */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+ hns3_err(hw, "secondary process does not support to set link up.");
+ return -ENOTSUP;
+ }
+
+ /*
+ * If device isn't started Rx/Tx function is still disabled, setting
+ * link up is not allowed. But it is probably better to return success
+ * to reduce the impact on the upper layer.
+ */
+ if (hw->adapter_state != HNS3_NIC_STARTED) {
+ hns3_info(hw, "device isn't started, can't set link up.");
+ return 0;
+ }
+
+ if (!hw->set_link_down)
+ return 0;
+
+ rte_spinlock_lock(&hw->lock);
+ ret = hns3_cfg_mac_mode(hw, true);
+ if (ret) {
+ rte_spinlock_unlock(&hw->lock);
+ hns3_err(hw, "failed to set link up, ret = %d", ret);
+ return ret;
+ }
+
+ hw->set_link_down = false;
+ hns3_start_tx_datapath(dev);
+ rte_spinlock_unlock(&hw->lock);
+
+ return 0;
+}
+
+static int
+hns3_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ int ret;
+
+ /*
+ * The "tx_pkt_burst" will be set to dummy function. But the secondary
+ * process does not support the mechanism for notifying the primary
+ * process.
+ */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+ hns3_err(hw, "secondary process does not support to set link down.");
+ return -ENOTSUP;
+ }
+
+ /*
+ * If device isn't started or the API has been called, link status is
+ * down, return success.
+ */
+ if (hw->adapter_state != HNS3_NIC_STARTED || hw->set_link_down)
+ return 0;
+
+ rte_spinlock_lock(&hw->lock);
+ hns3_stop_tx_datapath(dev);
+ ret = hns3_cfg_mac_mode(hw, false);
+ if (ret) {
+ hns3_start_tx_datapath(dev);
+ rte_spinlock_unlock(&hw->lock);
+ hns3_err(hw, "failed to set link down, ret = %d", ret);
+ return ret;
+ }
+
+ hw->set_link_down = true;
+ rte_spinlock_unlock(&hw->lock);
+
+ return 0;
+}
+
static int
hns3_parse_func_status(struct hns3_hw *hw, struct hns3_func_status_cmd *status)
{
req = (struct hns3_cfg_param_cmd *)desc[0].data;
/* get the configuration */
- cfg->vmdq_vport_num = hns3_get_field(rte_le_to_cpu_32(req->param[0]),
- HNS3_CFG_VMDQ_M, HNS3_CFG_VMDQ_S);
cfg->tc_num = hns3_get_field(rte_le_to_cpu_32(req->param[0]),
HNS3_CFG_TC_NUM_M, HNS3_CFG_TC_NUM_S);
cfg->tqp_desc_num = hns3_get_field(rte_le_to_cpu_32(req->param[0]),
ext_rss_size_max = hns3_get_field(rte_le_to_cpu_32(req->param[2]),
HNS3_CFG_EXT_RSS_SIZE_M,
HNS3_CFG_EXT_RSS_SIZE_S);
-
/*
* Field ext_rss_size_max obtained from firmware will be more flexible
* for future changes and expansions, which is an exponent of 2, instead
pf->tqp_config_mode = HNS3_FIXED_MAX_TQP_NUM_MODE;
hw->rss_info.ipv6_sctp_offload_supported = false;
hw->udp_cksum_mode = HNS3_SPECIAL_PORT_SW_CKSUM_MODE;
+ pf->support_multi_tc_pause = false;
return 0;
}
pf->tqp_config_mode = HNS3_FLEX_MAX_TQP_NUM_MODE;
hw->rss_info.ipv6_sctp_offload_supported = true;
hw->udp_cksum_mode = HNS3_SPECIAL_PORT_HW_CKSUM_MODE;
+ pf->support_multi_tc_pause = true;
return 0;
}
for (i = HNS3_MAX_TC_NUM - 1; i >= 0; i--) {
priv = &buf_alloc->priv_buf[i];
mask = BIT((uint8_t)i);
-
if (hw->hw_tc_map & mask &&
!(hw->dcb_info.hw_pfc_map & mask)) {
/* Clear the no pfc TC private buffer */
COMPENSATE_HALF_MPS_NUM * half_mps;
min_rx_priv = roundup(min_rx_priv, HNS3_BUF_SIZE_UNIT);
rx_priv = rounddown(rx_priv, HNS3_BUF_SIZE_UNIT);
-
if (rx_priv < min_rx_priv)
return false;
* For different application scenes, the enabled port number, TC number
* and no_drop TC number are different. In order to obtain the better
* performance, software could allocate the buffer size and configure
- * the waterline by tring to decrease the private buffer size according
- * to the order, namely, waterline of valided tc, pfc disabled tc, pfc
+ * the waterline by trying to decrease the private buffer size according
+ * to the order, namely, waterline of valid tc, pfc disabled tc, pfc
* enabled tc.
*/
if (hns3_rx_buf_calc_all(hw, false, buf_alloc))
if (state != hw->mac.link_status) {
hw->mac.link_status = state;
hns3_warn(hw, "Link status change to %s!", state ? "up" : "down");
- hns3_config_mac_tnl_int(hw,
- state == ETH_LINK_UP ? true : false);
return true;
}
* and belong to a different type from the MSI-x errors processed
* by the network driver.
*
- * Network driver should open the new error report on initialition
+ * Network driver should open the new error report on initialization.
*/
val = hns3_read_dev(hw, HNS3_VECTOR0_OTER_EN_REG);
hns3_set_bit(val, HNS3_VECTOR0_ALL_MSIX_ERR_B, enable ? 1 : 0);
goto err_cmd_init;
}
+ hns3_tx_push_init(eth_dev);
+
/*
* To ensure that the hardware environment is clean during
* initialization, the driver actively clear the hardware environment
hns3_rss_uninit(hns);
(void)hns3_config_gro(hw, false);
hns3_promisc_uninit(hw);
+ hns3_flow_uninit(eth_dev);
hns3_fdir_filter_uninit(hns);
hns3_uninit_umv_space(hw);
hns3_tqp_stats_uninit(hw);
/*
* Some hardware doesn't support auto-negotiation, but users may not
* configure link_speeds (default 0), which means auto-negotiation.
- * In this case, it should return success.
+ * In this case, a warning message need to be printed, instead of
+ * an error.
*/
- if (cfg->autoneg)
+ if (cfg->autoneg) {
+ hns3_warn(hw, "auto-negotiation is not supported, use default fixed speed!");
return 0;
+ }
return hns3_cfg_mac_speed_dup(hw, cfg->speed, cfg->duplex);
}
hns3_do_start(struct hns3_adapter *hns, bool reset_queue)
{
struct hns3_hw *hw = &hns->hw;
+ bool link_en;
int ret;
- ret = hns3_dcb_cfg_update(hns);
- if (ret)
+ ret = hns3_update_queue_map_configure(hns);
+ if (ret) {
+ hns3_err(hw, "failed to update queue mapping configuration, ret = %d",
+ ret);
return ret;
+ }
- /*
- * The hns3_dcb_cfg_update may configure TM module, so
- * hns3_tm_conf_update must called later.
- */
+ /* Note: hns3_tm_conf_update must be called after configuring DCB. */
ret = hns3_tm_conf_update(hw);
if (ret) {
PMD_INIT_LOG(ERR, "failed to update tm conf, ret = %d.", ret);
return ret;
}
- ret = hns3_cfg_mac_mode(hw, true);
+ link_en = hw->set_link_down ? false : true;
+ ret = hns3_cfg_mac_mode(hw, link_en);
if (ret) {
PMD_INIT_LOG(ERR, "failed to enable MAC, ret = %d", ret);
goto err_config_mac_mode;
ret = hns3_apply_link_speed(hw);
if (ret)
- goto err_config_mac_mode;
+ goto err_set_link_speed;
return 0;
-err_config_mac_mode:
+err_set_link_speed:
(void)hns3_cfg_mac_mode(hw, false);
+
+err_config_mac_mode:
hns3_dev_release_mbufs(hns);
/*
* Here is exception handling, hns3_reset_all_tqps will have the
{
struct hns3_adapter *hns = dev->data->dev_private;
struct hns3_hw *hw = &hns->hw;
+ bool old_state = hw->set_link_down;
int ret;
PMD_INIT_FUNC_TRACE();
rte_spinlock_lock(&hw->lock);
hw->adapter_state = HNS3_NIC_STARTING;
+ /*
+ * If the dev_set_link_down() API has been called, the "set_link_down"
+ * flag can be cleared by dev_start() API. In addition, the flag should
+ * also be cleared before calling hns3_do_start() so that MAC can be
+ * enabled in dev_start stage.
+ */
+ hw->set_link_down = false;
ret = hns3_do_start(hns, true);
- if (ret) {
- hw->adapter_state = HNS3_NIC_CONFIGURED;
- rte_spinlock_unlock(&hw->lock);
- return ret;
- }
+ if (ret)
+ goto do_start_fail;
+
ret = hns3_map_rx_interrupt(dev);
if (ret)
goto map_rx_inter_err;
hns3_stop_all_txqs(dev);
map_rx_inter_err:
(void)hns3_do_stop(hns);
+do_start_fail:
+ hw->set_link_down = old_state;
hw->adapter_state = HNS3_NIC_CONFIGURED;
rte_spinlock_unlock(&hw->lock);
/* Disable datapath on secondary process. */
hns3_mp_req_stop_rxtx(dev);
/* Prevent crashes when queues are still in use. */
- rte_delay_ms(hw->tqps_num);
+ rte_delay_ms(hw->cfg_max_queues);
rte_spinlock_lock(&hw->lock);
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0) {
struct hns3_hw *hw = &hns->hw;
int ret = 0;
- if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
- rte_free(eth_dev->process_private);
- eth_dev->process_private = NULL;
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
- }
if (hw->adapter_state == HNS3_NIC_STARTED)
ret = hns3_dev_stop(eth_dev);
hns3_uninit_pf(eth_dev);
hns3_free_all_queues(eth_dev);
rte_free(hw->reset.wait_data);
- rte_free(eth_dev->process_private);
- eth_dev->process_private = NULL;
hns3_mp_uninit_primary();
hns3_warn(hw, "Close port %u finished", hw->data->port_id);
return 0;
}
-static void
-hns3_get_fc_mode(struct hns3_hw *hw, enum rte_eth_fc_mode mode)
-{
- switch (mode) {
- case RTE_FC_NONE:
- hw->requested_fc_mode = HNS3_FC_NONE;
- break;
- case RTE_FC_RX_PAUSE:
- hw->requested_fc_mode = HNS3_FC_RX_PAUSE;
- break;
- case RTE_FC_TX_PAUSE:
- hw->requested_fc_mode = HNS3_FC_TX_PAUSE;
- break;
- case RTE_FC_FULL:
- hw->requested_fc_mode = HNS3_FC_FULL;
- break;
- default:
- hw->requested_fc_mode = HNS3_FC_NONE;
- hns3_warn(hw, "fc_mode(%u) exceeds member scope and is "
- "configured to RTE_FC_NONE", mode);
- break;
- }
-}
-
static int
hns3_check_fc_autoneg_valid(struct hns3_hw *hw, uint8_t autoneg)
{
hns3_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(dev->data->dev_private);
int ret;
if (fc_conf->high_water || fc_conf->low_water ||
return -EOPNOTSUPP;
}
- if (hw->num_tc > 1) {
+ if (hw->num_tc > 1 && !pf->support_multi_tc_pause) {
hns3_err(hw, "in multi-TC scenarios, MAC pause is not supported.");
return -EOPNOTSUPP;
}
- hns3_get_fc_mode(hw, fc_conf->mode);
-
rte_spinlock_lock(&hw->lock);
ret = hns3_fc_enable(dev, fc_conf);
rte_spinlock_unlock(&hw->lock);
return -EOPNOTSUPP;
}
- hns3_get_fc_mode(hw, pfc_conf->fc.mode);
-
rte_spinlock_lock(&hw->lock);
ret = hns3_dcb_pfc_enable(dev, pfc_conf);
rte_spinlock_unlock(&hw->lock);
hns3_check_event_cause(hns, NULL);
reset = hns3_get_reset_level(hns, &hw->reset.pending);
-
if (reset != HNS3_NONE_RESET && hw->reset.level != HNS3_NONE_RESET &&
hw->reset.level < reset) {
hns3_warn(hw, "High level reset %d is pending", reset);
if (wait_data->result == HNS3_WAIT_SUCCESS)
return 0;
else if (wait_data->result == HNS3_WAIT_TIMEOUT) {
- gettimeofday(&tv, NULL);
+ hns3_clock_gettime(&tv);
hns3_warn(hw, "Reset step4 hardware not ready after reset time=%ld.%.6ld",
tv.tv_sec, tv.tv_usec);
return -ETIME;
wait_data->hns = hns;
wait_data->check_completion = is_pf_reset_done;
wait_data->end_ms = (uint64_t)HNS3_RESET_WAIT_CNT *
- HNS3_RESET_WAIT_MS + get_timeofday_ms();
+ HNS3_RESET_WAIT_MS + hns3_clock_gettime_ms();
wait_data->interval = HNS3_RESET_WAIT_MS * USEC_PER_MSEC;
wait_data->count = HNS3_RESET_WAIT_CNT;
wait_data->result = HNS3_WAIT_REQUEST;
struct timeval tv;
uint32_t val;
- gettimeofday(&tv, NULL);
+ hns3_clock_gettime(&tv);
if (hns3_read_dev(hw, HNS3_GLOBAL_RESET_REG) ||
hns3_read_dev(hw, HNS3_FUN_RST_ING)) {
hns3_warn(hw, "Don't process msix during resetting time=%ld.%.6ld",
rte_wmb();
/* Disable datapath on secondary process. */
hns3_mp_req_stop_rxtx(eth_dev);
- rte_delay_ms(hw->tqps_num);
+ rte_delay_ms(hw->cfg_max_queues);
rte_spinlock_lock(&hw->lock);
if (hns->hw.adapter_state == HNS3_NIC_STARTED ||
*/
reset_level = hns3_get_reset_level(hns, &hw->reset.pending);
if (reset_level != HNS3_NONE_RESET) {
- gettimeofday(&tv_start, NULL);
+ hns3_clock_gettime(&tv_start);
ret = hns3_reset_process(hns, reset_level);
- gettimeofday(&tv, NULL);
+ hns3_clock_gettime(&tv);
timersub(&tv, &tv_start, &tv_delta);
- msec = tv_delta.tv_sec * MSEC_PER_SEC +
- tv_delta.tv_usec / USEC_PER_MSEC;
+ msec = hns3_clock_calctime_ms(&tv_delta);
if (msec > HNS3_RESET_PROCESS_MS)
- hns3_err(hw, "%d handle long time delta %" PRIx64
+ hns3_err(hw, "%d handle long time delta %" PRIu64
" ms time=%ld.%.6ld",
hw->reset.level, msec,
tv.tv_sec, tv.tv_usec);
return ret;
/* HNS3 PMD driver only support one bit set mode, e.g. 0x1, 0x4 */
- if (!is_fec_mode_one_bit_set(mode))
- hns3_err(hw, "FEC mode(0x%x) not supported in HNS3 PMD,"
+ if (!is_fec_mode_one_bit_set(mode)) {
+ hns3_err(hw, "FEC mode(0x%x) not supported in HNS3 PMD, "
"FEC mode should be only one bit set", mode);
+ return -EINVAL;
+ }
/*
* Check whether the configured mode is within the FEC capability.
return 0;
}
+void
+hns3_clock_gettime(struct timeval *tv)
+{
+#ifdef CLOCK_MONOTONIC_RAW /* Defined in glibc bits/time.h */
+#define CLOCK_TYPE CLOCK_MONOTONIC_RAW
+#else
+#define CLOCK_TYPE CLOCK_MONOTONIC
+#endif
+#define NSEC_TO_USEC_DIV 1000
+
+ struct timespec spec;
+ (void)clock_gettime(CLOCK_TYPE, &spec);
+
+ tv->tv_sec = spec.tv_sec;
+ tv->tv_usec = spec.tv_nsec / NSEC_TO_USEC_DIV;
+}
+
+uint64_t
+hns3_clock_calctime_ms(struct timeval *tv)
+{
+ return (uint64_t)tv->tv_sec * MSEC_PER_SEC +
+ tv->tv_usec / USEC_PER_MSEC;
+}
+
+uint64_t
+hns3_clock_gettime_ms(void)
+{
+ struct timeval tv;
+
+ hns3_clock_gettime(&tv);
+ return hns3_clock_calctime_ms(&tv);
+}
+
static int
hns3_parse_io_hint_func(const char *key, const char *value, void *extra_args)
{
.mac_addr_set = hns3_set_default_mac_addr,
.set_mc_addr_list = hns3_set_mc_mac_addr_list,
.link_update = hns3_dev_link_update,
+ .dev_set_link_up = hns3_dev_set_link_up,
+ .dev_set_link_down = hns3_dev_set_link_down,
.rss_hash_update = hns3_dev_rss_hash_update,
.rss_hash_conf_get = hns3_dev_rss_hash_conf_get,
.reta_update = hns3_dev_rss_reta_update,
PMD_INIT_FUNC_TRACE();
- eth_dev->process_private = (struct hns3_process_private *)
- rte_zmalloc_socket("hns3_filter_list",
- sizeof(struct hns3_process_private),
- RTE_CACHE_LINE_SIZE, eth_dev->device->numa_node);
- if (eth_dev->process_private == NULL) {
- PMD_INIT_LOG(ERR, "Failed to alloc memory for process private");
- return -ENOMEM;
- }
-
hns3_flow_init(eth_dev);
hns3_set_rxtx_function(eth_dev);
"process, ret = %d", ret);
goto err_mp_init_secondary;
}
-
hw->secondary_cnt++;
+ hns3_tx_push_init(eth_dev);
return 0;
}
eth_dev->tx_pkt_burst = NULL;
eth_dev->tx_pkt_prepare = NULL;
eth_dev->tx_descriptor_status = NULL;
- rte_free(eth_dev->process_private);
- eth_dev->process_private = NULL;
return ret;
}
PMD_INIT_FUNC_TRACE();
- if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
- rte_free(eth_dev->process_private);
- eth_dev->process_private = NULL;
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
- }
if (hw->adapter_state < HNS3_NIC_CLOSING)
hns3_dev_close(eth_dev);
HNS3_DEVARG_RX_FUNC_HINT "=vec|sve|simple|common "
HNS3_DEVARG_TX_FUNC_HINT "=vec|sve|simple|common "
HNS3_DEVARG_DEV_CAPS_MASK "=<1-65535> ");
-RTE_LOG_REGISTER(hns3_logtype_init, pmd.net.hns3.init, NOTICE);
-RTE_LOG_REGISTER(hns3_logtype_driver, pmd.net.hns3.driver, NOTICE);
+RTE_LOG_REGISTER_SUFFIX(hns3_logtype_init, init, NOTICE);
+RTE_LOG_REGISTER_SUFFIX(hns3_logtype_driver, driver, NOTICE);
git.droids-corp.org / dpdk.git / blobdiff