examples/vm_power: allow managing idle cores
[dpdk.git] / drivers / net / hns3 / hns3_ethdev.h
index 06a1864..3c991f4 100644 (file)
@@ -30,6 +30,9 @@
 #define HNS3_PCI_REVISION_ID                   0x08
 #define HNS3_PCI_REVISION_ID_LEN               1
 
+#define HNS3_PF_FUNC_ID                        0
+#define HNS3_1ST_VF_FUNC_ID            1
+
 #define HNS3_UC_MACADDR_NUM            128
 #define HNS3_VF_UC_MACADDR_NUM         48
 #define HNS3_MC_MACADDR_NUM            128
@@ -43,6 +46,7 @@
 #define HNS3_MAX_BD_PAYLEN             (1024 * 1024 - 1)
 #define HNS3_MAX_TSO_HDR_SIZE          512
 #define HNS3_MAX_TSO_HDR_BD_NUM                3
+#define HNS3_MAX_LRO_SIZE              64512
 
 #define HNS3_ETH_OVERHEAD \
        (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + HNS3_VLAN_TAG_SIZE * 2)
@@ -168,6 +172,13 @@ struct hns3_fake_queue_data {
        uint16_t nb_fake_tx_queues; /* Number of fake TX queues. */
 };
 
+#define HNS3_PORT_BASE_VLAN_DISABLE    0
+#define HNS3_PORT_BASE_VLAN_ENABLE     1
+struct hns3_port_base_vlan_config {
+       uint16_t state;
+       uint16_t pvid;
+};
+
 /* Primary process maintains driver state in main thread.
  *
  * +---------------+
@@ -364,7 +375,6 @@ struct hns3_hw {
        uint16_t tqps_num;          /* num task queue pairs of this function */
        uint16_t intr_tqps_num;     /* num queue pairs mapping interrupt */
        uint16_t rss_size_max;      /* HW defined max RSS task queue */
-       uint16_t rx_buf_len;
        uint16_t num_tx_desc;       /* desc num of per tx queue */
        uint16_t num_rx_desc;       /* desc num of per rx queue */
 
@@ -391,7 +401,9 @@ struct hns3_hw {
        uint16_t alloc_rss_size;    /* RX queue number per TC */
        uint16_t tx_qnum_per_tc;    /* TX queue number per TC */
 
-       uint32_t flag;
+       uint32_t capability;
+
+       struct hns3_port_base_vlan_config port_base_vlan_cfg;
        /*
         * PMD setup and configuration is not thread safe. Since it is not
         * performance sensitive, it is better to guarantee thread-safety
@@ -421,11 +433,6 @@ struct hns3_user_vlan_table {
        uint16_t vlan_id;
 };
 
-struct hns3_port_base_vlan_config {
-       uint16_t state;
-       uint16_t pvid;
-};
-
 /* Vlan tag configuration for RX direction */
 struct hns3_rx_vtag_cfg {
        uint8_t rx_vlan_offload_en; /* Whether enable rx vlan offload */
@@ -501,7 +508,6 @@ struct hns3_pf {
        bool support_sfp_query;
 
        struct hns3_vtag_cfg vtag_config;
-       struct hns3_port_base_vlan_config port_base_vlan_cfg;
        LIST_HEAD(vlan_tbl, hns3_user_vlan_table) vlan_list;
 
        struct hns3_fdir_info fdir; /* flow director info */
@@ -526,7 +532,7 @@ struct hns3_adapter {
 #define HNS3_DEV_SUPPORT_DCB_B                 0x0
 
 #define hns3_dev_dcb_supported(hw) \
-       hns3_get_bit((hw)->flag, HNS3_DEV_SUPPORT_DCB_B)
+       hns3_get_bit((hw)->capability, HNS3_DEV_SUPPORT_DCB_B)
 
 #define HNS3_DEV_PRIVATE_TO_HW(adapter) \
        (&((struct hns3_adapter *)adapter)->hw)
@@ -648,7 +654,6 @@ hns3_test_and_clear_bit(unsigned int nr, volatile uint64_t *addr)
 }
 
 int hns3_buffer_alloc(struct hns3_hw *hw);
-int hns3_config_gro(struct hns3_hw *hw, bool en);
 int hns3_dev_filter_ctrl(struct rte_eth_dev *dev,
                         enum rte_filter_type filter_type,
                         enum rte_filter_op filter_op, void *arg);
@@ -667,4 +672,13 @@ is_reset_pending(struct hns3_adapter *hns)
        return ret;
 }
 
+static inline uint64_t
+hns3_txvlan_cap_get(struct hns3_hw *hw)
+{
+       if (hw->port_base_vlan_cfg.state)
+               return DEV_TX_OFFLOAD_VLAN_INSERT;
+       else
+               return DEV_TX_OFFLOAD_VLAN_INSERT | DEV_TX_OFFLOAD_QINQ_INSERT;
+}
+
 #endif /* _HNS3_ETHDEV_H_ */