#define HNS3_UNLIMIT_PROMISC_MODE 0
#define HNS3_LIMIT_PROMISC_MODE 1
+#define HNS3_SPECIAL_PORT_SW_CKSUM_MODE 0
+#define HNS3_SPECIAL_PORT_HW_CKSUM_MODE 1
+
#define HNS3_UC_MACADDR_NUM 128
#define HNS3_VF_UC_MACADDR_NUM 48
#define HNS3_MC_MACADDR_NUM 128
#define HNS3_TSO_SW_CAL_PSEUDO_H_CSUM 0
#define HNS3_TSO_HW_CAL_PSEUDO_H_CSUM 1
+#define HNS3_PKTS_DROP_STATS_MODE1 0
+#define HNS3_PKTS_DROP_STATS_MODE2 1
+
struct hns3_hw {
struct rte_eth_dev_data *data;
void *io_base;
/* Include Mac stats | Rx stats | Tx stats */
struct hns3_mac_stats mac_stats;
struct hns3_rx_missed_stats imissed_stats;
+ uint64_t oerror_stats;
uint32_t fw_version;
uint16_t num_msi;
* port won't be copied to the function which has set promisc mode.
*/
uint8_t promisc_mode;
+
+ /*
+ * drop_stats_mode mode.
+ * value range:
+ * HNS3_PKTS_DROP_STATS_MODE1/HNS3_PKTS_DROP_STATS_MODE2
+ *
+ * - HNS3_PKTS_DROP_STATS_MODE1
+ * This mode for kunpeng920. In this mode, port level imissed stats
+ * is supported. It only includes RPU drop stats.
+ *
+ * - HNS3_PKTS_DROP_STATS_MODE2
+ * This mode for kunpeng930. In this mode, imissed stats and oerrors
+ * stats is supported. Function level imissed stats is supported. It
+ * includes RPU drop stats in VF, and includes both RPU drop stats
+ * and SSU drop stats in PF. Oerror stats is also supported in PF.
+ */
+ uint8_t drop_stats_mode;
+
uint8_t max_non_tso_bd_num; /* max BD number of one non-TSO packet */
+ /*
+ * udp checksum mode.
+ * value range:
+ * HNS3_SPECIAL_PORT_HW_CKSUM_MODE/HNS3_SPECIAL_PORT_SW_CKSUM_MODE
+ *
+ * - HNS3_SPECIAL_PORT_SW_CKSUM_MODE
+ * In this mode, HW can not do checksum for special UDP port like
+ * 4789, 4790, 6081 for non-tunnel UDP packets and UDP tunnel
+ * packets without the PKT_TX_TUNEL_MASK in the mbuf. So, PMD need
+ * do the checksum for these packets to avoid a checksum error.
+ *
+ * - HNS3_SPECIAL_PORT_HW_CKSUM_MODE
+ * In this mode, HW does not have the preceding problems and can
+ * directly calculate the checksum of these UDP packets.
+ */
+ uint8_t udp_cksum_mode;
struct hns3_port_base_vlan_config port_base_vlan_cfg;
/*
#define HNS3_FLAG_TC_BASE_SCH_MODE 1
#define HNS3_FLAG_VNET_BASE_SCH_MODE 2
-struct hns3_err_msix_intr_stats {
- uint64_t mac_afifo_tnl_int_cnt;
- uint64_t ppu_mpf_abn_int_st2_msix_cnt;
- uint64_t ssu_port_based_pf_int_cnt;
- uint64_t ppp_pf_abnormal_int_cnt;
- uint64_t ppu_pf_abnormal_int_msix_cnt;
-
- uint64_t imp_tcm_ecc_int_cnt;
- uint64_t cmdq_mem_ecc_int_cnt;
- uint64_t imp_rd_poison_int_cnt;
- uint64_t tqp_int_ecc_int_cnt;
- uint64_t msix_ecc_int_cnt;
- uint64_t ssu_ecc_multi_bit_int_0_cnt;
- uint64_t ssu_ecc_multi_bit_int_1_cnt;
- uint64_t ssu_common_ecc_int_cnt;
- uint64_t igu_int_cnt;
- uint64_t ppp_mpf_abnormal_int_st1_cnt;
- uint64_t ppp_mpf_abnormal_int_st3_cnt;
- uint64_t ppu_mpf_abnormal_int_st1_cnt;
- uint64_t ppu_mpf_abn_int_st2_ras_cnt;
- uint64_t ppu_mpf_abnormal_int_st3_cnt;
- uint64_t tm_sch_int_cnt;
- uint64_t qcn_fifo_int_cnt;
- uint64_t qcn_ecc_int_cnt;
- uint64_t ncsi_ecc_int_cnt;
- uint64_t ssu_port_based_err_int_cnt;
- uint64_t ssu_fifo_overflow_int_cnt;
- uint64_t ssu_ets_tcg_int_cnt;
- uint64_t igu_egu_tnl_int_cnt;
- uint64_t ppu_pf_abnormal_int_ras_cnt;
-};
-
/* vlan entry information. */
struct hns3_user_vlan_table {
LIST_ENTRY(hns3_user_vlan_table) next;
uint16_t max_umv_size;
uint16_t used_umv_size;
- /* Statistics information for abnormal interrupt */
- struct hns3_err_msix_intr_stats abn_int_stats;
-
bool support_sfp_query;
uint32_t fec_mode; /* current FEC mode for ethdev */
}
int hns3_buffer_alloc(struct hns3_hw *hw);
-int hns3_dev_filter_ctrl(struct rte_eth_dev *dev,
- enum rte_filter_type filter_type,
- enum rte_filter_op filter_op, void *arg);
+int hns3_dev_flow_ops_get(struct rte_eth_dev *dev,
+ const struct rte_flow_ops **ops);
bool hns3_is_reset_pending(struct hns3_adapter *hns);
bool hns3vf_is_reset_pending(struct hns3_adapter *hns);
void hns3_update_link_status_and_event(struct hns3_hw *hw);