#include <inttypes.h>
#include <unistd.h>
#include <arpa/inet.h>
+#include <linux/pci_regs.h>
+
#include <rte_alarm.h>
#include <rte_atomic.h>
#include <rte_bus_pci.h>
#include <rte_io.h>
#include <rte_log.h>
#include <rte_pci.h>
+#include <rte_vfio.h>
#include "hns3_ethdev.h"
#include "hns3_logs.h"
static int hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
static int hns3vf_dev_configure_vlan(struct rte_eth_dev *dev);
+/* set PCI bus mastering */
+static void
+hns3vf_set_bus_master(const struct rte_pci_device *device, bool op)
+{
+ uint16_t reg;
+
+ rte_pci_read_config(device, ®, sizeof(reg), PCI_COMMAND);
+
+ if (op)
+ /* set the master bit */
+ reg |= PCI_COMMAND_MASTER;
+ else
+ reg &= ~(PCI_COMMAND_MASTER);
+
+ rte_pci_write_config(device, ®, sizeof(reg), PCI_COMMAND);
+}
+
+/**
+ * hns3vf_find_pci_capability - lookup a capability in the PCI capability list
+ * @cap: the capability
+ *
+ * Return the address of the given capability within the PCI capability list.
+ */
+static int
+hns3vf_find_pci_capability(const struct rte_pci_device *device, int cap)
+{
+#define MAX_PCIE_CAPABILITY 48
+ uint16_t status;
+ uint8_t pos;
+ uint8_t id;
+ int ttl;
+
+ rte_pci_read_config(device, &status, sizeof(status), PCI_STATUS);
+ if (!(status & PCI_STATUS_CAP_LIST))
+ return 0;
+
+ ttl = MAX_PCIE_CAPABILITY;
+ rte_pci_read_config(device, &pos, sizeof(pos), PCI_CAPABILITY_LIST);
+ while (ttl-- && pos >= PCI_STD_HEADER_SIZEOF) {
+ rte_pci_read_config(device, &id, sizeof(id),
+ (pos + PCI_CAP_LIST_ID));
+
+ if (id == 0xFF)
+ break;
+
+ if (id == cap)
+ return (int)pos;
+
+ rte_pci_read_config(device, &pos, sizeof(pos),
+ (pos + PCI_CAP_LIST_NEXT));
+ }
+ return 0;
+}
+
+static int
+hns3vf_enable_msix(const struct rte_pci_device *device, bool op)
+{
+ uint16_t control;
+ int pos;
+
+ pos = hns3vf_find_pci_capability(device, PCI_CAP_ID_MSIX);
+ if (pos) {
+ rte_pci_read_config(device, &control, sizeof(control),
+ (pos + PCI_MSIX_FLAGS));
+ if (op)
+ control |= PCI_MSIX_FLAGS_ENABLE;
+ else
+ control &= ~PCI_MSIX_FLAGS_ENABLE;
+ rte_pci_write_config(device, &control, sizeof(control),
+ (pos + PCI_MSIX_FLAGS));
+ return 0;
+ }
+ return -ENXIO;
+}
+
static int
hns3vf_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
__attribute__ ((unused)) uint32_t idx,
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
HNS3_MBX_MAC_VLAN_UC_MODIFY, addr_bytes,
- HNS3_TWO_ETHER_ADDR_LEN, false, NULL, 0);
+ HNS3_TWO_ETHER_ADDR_LEN, true, NULL, 0);
if (ret) {
- rte_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
- mac_addr);
- hns3_err(hw, "Failed to set mac addr(%s) for vf: %d", mac_str,
- ret);
+ /*
+ * The hns3 VF PMD driver depends on the hns3 PF kernel ethdev
+ * driver. When user has configured a MAC address for VF device
+ * by "ip link set ..." command based on the PF device, the hns3
+ * PF kernel ethdev driver does not allow VF driver to request
+ * reconfiguring a different default MAC address, and return
+ * -EPREM to VF driver through mailbox.
+ */
+ if (ret == -EPERM) {
+ rte_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
+ old_addr);
+ hns3_warn(hw, "Has permanet mac addr(%s) for vf",
+ mac_str);
+ } else {
+ rte_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
+ mac_addr);
+ hns3_err(hw, "Failed to set mac addr(%s) for vf: %d",
+ mac_str, ret);
+ }
}
rte_ether_addr_copy(mac_addr,
int ret;
/*
- * Hardware does not support where the number of rx and tx queues is
- * not equal in hip08.
+ * Hardware does not support individually enable/disable/reset the Tx or
+ * Rx queue in hns3 network engine. Driver must enable/disable/reset Tx
+ * and Rx queues at the same time. When the numbers of Tx queues
+ * allocated by upper applications are not equal to the numbers of Rx
+ * queues, driver needs to setup fake Tx or Rx queues to adjust numbers
+ * of Tx/Rx queues. otherwise, network engine can not work as usual. But
+ * these fake queues are imperceptible, and can not be used by upper
+ * applications.
*/
- if (nb_rx_q != nb_tx_q) {
- hns3_err(hw,
- "nb_rx_queues(%u) not equal with nb_tx_queues(%u)! "
- "Hardware does not support this configuration!",
- nb_rx_q, nb_tx_q);
- return -EINVAL;
+ ret = hns3_set_fake_rx_or_tx_queues(dev, nb_rx_q, nb_tx_q);
+ if (ret) {
+ hns3_err(hw, "Failed to set rx/tx fake queues: %d", ret);
+ return ret;
}
+ hw->adapter_state = HNS3_NIC_CONFIGURING;
if (conf->link_speeds & ETH_LINK_SPEED_FIXED) {
hns3_err(hw, "setting link speed/duplex not supported");
- return -EINVAL;
+ ret = -EINVAL;
+ goto cfg_err;
}
- hw->adapter_state = HNS3_NIC_CONFIGURING;
-
/* When RSS is not configured, redirect the packet queue 0 */
if ((uint32_t)mq_mode & ETH_MQ_RX_RSS_FLAG) {
rss_conf = conf->rx_adv_conf.rss_conf;
return 0;
cfg_err:
+ (void)hns3_set_fake_rx_or_tx_queues(dev, 0, 0);
hw->adapter_state = HNS3_NIC_INITIALIZED;
+
return ret;
}
return 0;
}
+static int
+hns3vf_get_host_mac_addr(struct hns3_hw *hw)
+{
+ uint8_t host_mac[RTE_ETHER_ADDR_LEN];
+ int ret;
+
+ ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_MAC_ADDR, 0, NULL, 0,
+ true, host_mac, RTE_ETHER_ADDR_LEN);
+ if (ret) {
+ hns3_err(hw, "Failed to get mac addr from PF: %d", ret);
+ return ret;
+ }
+
+ memcpy(hw->mac.mac_addr, host_mac, RTE_ETHER_ADDR_LEN);
+
+ return 0;
+}
+
static int
hns3vf_get_configuration(struct hns3_hw *hw)
{
if (ret)
return ret;
+ /* Get user defined VF MAC addr from PF */
+ ret = hns3vf_get_host_mac_addr(hw);
+ if (ret)
+ return ret;
+
/* Get tc configuration from PF */
return hns3vf_get_tc_info(hw);
}
-static void
+static int
hns3vf_set_tc_info(struct hns3_adapter *hns)
{
struct hns3_hw *hw = &hns->hw;
uint16_t nb_rx_q = hw->data->nb_rx_queues;
- uint16_t new_tqps;
+ uint16_t nb_tx_q = hw->data->nb_tx_queues;
uint8_t i;
hw->num_tc = 0;
if (hw->hw_tc_map & BIT(i))
hw->num_tc++;
- new_tqps = RTE_MIN(hw->tqps_num, nb_rx_q);
- hw->alloc_rss_size = RTE_MIN(hw->rss_size_max, new_tqps / hw->num_tc);
- hw->alloc_tqps = hw->alloc_rss_size * hw->num_tc;
+ if (nb_rx_q < hw->num_tc) {
+ hns3_err(hw, "number of Rx queues(%d) is less than tcs(%d).",
+ nb_rx_q, hw->num_tc);
+ return -EINVAL;
+ }
+
+ if (nb_tx_q < hw->num_tc) {
+ hns3_err(hw, "number of Tx queues(%d) is less than tcs(%d).",
+ nb_tx_q, hw->num_tc);
+ return -EINVAL;
+ }
+
+ hns3_set_rss_size(hw, nb_rx_q);
+ hns3_tc_queue_mapping_cfg(hw, nb_tx_q);
- hns3_tc_queue_mapping_cfg(hw);
+ return 0;
}
static void
return ret;
}
+static int
+hns3vf_clear_vport_list(struct hns3_hw *hw)
+{
+ return hns3_send_mbx_msg(hw, HNS3_MBX_HANDLE_VF_TBL,
+ HNS3_MBX_VPORT_LIST_CLEAR, NULL, 0, false,
+ NULL, 0);
+}
+
static int
hns3vf_init_vf(struct rte_eth_dev *eth_dev)
{
goto err_get_config;
}
- rte_eth_random_addr(hw->mac.mac_addr); /* Generate a random mac addr */
+ /*
+ * The hns3 PF ethdev driver in kernel support setting VF MAC address
+ * on the host by "ip link set ..." command. To avoid some incorrect
+ * scenes, for example, hns3 VF PMD driver fails to receive and send
+ * packets after user configure the MAC address by using the
+ * "ip link set ..." command, hns3 VF PMD driver keep the same MAC
+ * address strategy as the hns3 kernel ethdev driver in the
+ * initialization. If user configure a MAC address by the ip command
+ * for VF device, then hns3 VF PMD driver will start with it, otherwise
+ * start with a random MAC address in the initialization.
+ */
+ ret = rte_is_zero_ether_addr((struct rte_ether_addr *)hw->mac.mac_addr);
+ if (ret)
+ rte_eth_random_addr(hw->mac.mac_addr);
+
+ ret = hns3vf_clear_vport_list(hw);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failed to clear tbl list: %d", ret);
+ goto err_get_config;
+ }
ret = hns3vf_init_hardware(hns);
if (ret)
hns3_set_default_rss_args(hw);
- (void)hns3_stats_reset(eth_dev);
return 0;
err_get_config:
hw->io_base = NULL;
}
+static int
+hns3vf_bind_ring_with_vector(struct rte_eth_dev *dev, uint8_t vector_id,
+ bool mmap, uint16_t queue_id)
+
+{
+ struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct hns3_vf_bind_vector_msg bind_msg;
+ uint16_t code;
+ int ret;
+
+ memset(&bind_msg, 0, sizeof(bind_msg));
+ code = mmap ? HNS3_MBX_MAP_RING_TO_VECTOR :
+ HNS3_MBX_UNMAP_RING_TO_VECTOR;
+ bind_msg.vector_id = vector_id;
+ bind_msg.ring_num = 1;
+ bind_msg.param[0].ring_type = HNS3_RING_TYPE_RX;
+ bind_msg.param[0].tqp_index = queue_id;
+ bind_msg.param[0].int_gl_index = HNS3_RING_GL_RX;
+
+ ret = hns3_send_mbx_msg(hw, code, 0, (uint8_t *)&bind_msg,
+ sizeof(bind_msg), false, NULL, 0);
+ if (ret) {
+ hns3_err(hw, "Map TQP %d fail, vector_id is %d, ret is %d.",
+ queue_id, vector_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static int
hns3vf_do_stop(struct hns3_adapter *hns)
{
}
static void
-hns3vf_dev_stop(struct rte_eth_dev *eth_dev)
+hns3vf_unmap_rx_interrupt(struct rte_eth_dev *dev)
{
- struct hns3_adapter *hns = eth_dev->data->dev_private;
+ struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ uint8_t base = 0;
+ uint8_t vec = 0;
+ uint16_t q_id;
+
+ if (dev->data->dev_conf.intr_conf.rxq == 0)
+ return;
+
+ /* unmap the ring with vector */
+ if (rte_intr_allow_others(intr_handle)) {
+ vec = RTE_INTR_VEC_RXTX_OFFSET;
+ base = RTE_INTR_VEC_RXTX_OFFSET;
+ }
+ if (rte_intr_dp_is_en(intr_handle)) {
+ for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
+ (void)hns3vf_bind_ring_with_vector(dev, vec, false,
+ q_id);
+ if (vec < base + intr_handle->nb_efd - 1)
+ vec++;
+ }
+ }
+ /* Clean datapath event and queue/vec mapping */
+ rte_intr_efd_disable(intr_handle);
+ if (intr_handle->intr_vec) {
+ rte_free(intr_handle->intr_vec);
+ intr_handle->intr_vec = NULL;
+ }
+}
+
+static void
+hns3vf_dev_stop(struct rte_eth_dev *dev)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
struct hns3_hw *hw = &hns->hw;
PMD_INIT_FUNC_TRACE();
hw->adapter_state = HNS3_NIC_STOPPING;
- hns3_set_rxtx_function(eth_dev);
+ hns3_set_rxtx_function(dev);
rte_wmb();
/* Disable datapath on secondary process. */
- hns3_mp_req_stop_rxtx(eth_dev);
+ hns3_mp_req_stop_rxtx(dev);
/* Prevent crashes when queues are still in use. */
rte_delay_ms(hw->tqps_num);
hns3_dev_release_mbufs(hns);
hw->adapter_state = HNS3_NIC_CONFIGURED;
}
+ rte_eal_alarm_cancel(hns3vf_service_handler, dev);
rte_spinlock_unlock(&hw->lock);
+
+ hns3vf_unmap_rx_interrupt(dev);
}
static void
hns3_reset_abort(hns);
hw->adapter_state = HNS3_NIC_CLOSED;
rte_eal_alarm_cancel(hns3vf_keep_alive_handler, eth_dev);
- rte_eal_alarm_cancel(hns3vf_service_handler, eth_dev);
hns3vf_configure_all_mc_mac_addr(hns, true);
hns3vf_remove_all_vlan_table(hns);
hns3vf_uninit_vf(eth_dev);
struct hns3_mac *mac = &hw->mac;
struct rte_eth_link new_link;
- hns3vf_request_link_info(hw);
-
memset(&new_link, 0, sizeof(new_link));
switch (mac->link_speed) {
case ETH_SPEED_NUM_10M:
struct hns3_hw *hw = &hns->hw;
int ret;
- hns3vf_set_tc_info(hns);
+ ret = hns3vf_set_tc_info(hns);
+ if (ret)
+ return ret;
ret = hns3_start_queues(hns, reset_queue);
if (ret) {
}
static int
-hns3vf_dev_start(struct rte_eth_dev *eth_dev)
+hns3vf_map_rx_interrupt(struct rte_eth_dev *dev)
{
- struct hns3_adapter *hns = eth_dev->data->dev_private;
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t intr_vector;
+ uint8_t base = 0;
+ uint8_t vec = 0;
+ uint16_t q_id;
+ int ret;
+
+ if (dev->data->dev_conf.intr_conf.rxq == 0)
+ return 0;
+
+ /* disable uio/vfio intr/eventfd mapping */
+ rte_intr_disable(intr_handle);
+
+ /* check and configure queue intr-vector mapping */
+ if (rte_intr_cap_multiple(intr_handle) ||
+ !RTE_ETH_DEV_SRIOV(dev).active) {
+ intr_vector = hw->used_rx_queues;
+ /* It creates event fd for each intr vector when MSIX is used */
+ if (rte_intr_efd_enable(intr_handle, intr_vector))
+ return -EINVAL;
+ }
+ if (rte_intr_dp_is_en(intr_handle) && !intr_handle->intr_vec) {
+ intr_handle->intr_vec =
+ rte_zmalloc("intr_vec",
+ hw->used_rx_queues * sizeof(int), 0);
+ if (intr_handle->intr_vec == NULL) {
+ hns3_err(hw, "Failed to allocate %d rx_queues"
+ " intr_vec", hw->used_rx_queues);
+ ret = -ENOMEM;
+ goto vf_alloc_intr_vec_error;
+ }
+ }
+
+ if (rte_intr_allow_others(intr_handle)) {
+ vec = RTE_INTR_VEC_RXTX_OFFSET;
+ base = RTE_INTR_VEC_RXTX_OFFSET;
+ }
+ if (rte_intr_dp_is_en(intr_handle)) {
+ for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
+ ret = hns3vf_bind_ring_with_vector(dev, vec, true,
+ q_id);
+ if (ret)
+ goto vf_bind_vector_error;
+ intr_handle->intr_vec[q_id] = vec;
+ if (vec < base + intr_handle->nb_efd - 1)
+ vec++;
+ }
+ }
+ rte_intr_enable(intr_handle);
+ return 0;
+
+vf_bind_vector_error:
+ rte_intr_efd_disable(intr_handle);
+ if (intr_handle->intr_vec) {
+ free(intr_handle->intr_vec);
+ intr_handle->intr_vec = NULL;
+ }
+ return ret;
+vf_alloc_intr_vec_error:
+ rte_intr_efd_disable(intr_handle);
+ return ret;
+}
+
+static int
+hns3vf_dev_start(struct rte_eth_dev *dev)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
struct hns3_hw *hw = &hns->hw;
int ret;
PMD_INIT_FUNC_TRACE();
if (rte_atomic16_read(&hw->reset.resetting))
return -EBUSY;
+
rte_spinlock_lock(&hw->lock);
hw->adapter_state = HNS3_NIC_STARTING;
ret = hns3vf_do_start(hns, true);
}
hw->adapter_state = HNS3_NIC_STARTED;
rte_spinlock_unlock(&hw->lock);
- hns3_set_rxtx_function(eth_dev);
- hns3_mp_req_start_rxtx(eth_dev);
- return 0;
+
+ ret = hns3vf_map_rx_interrupt(dev);
+ if (ret)
+ return ret;
+ hns3_set_rxtx_function(dev);
+ hns3_mp_req_start_rxtx(dev);
+ rte_eal_alarm_set(HNS3VF_SERVICE_INTERVAL, hns3vf_service_handler, dev);
+
+ return ret;
}
static bool
struct hns3_wait_data *wait_data = hw->reset.wait_data;
struct timeval tv;
- if (wait_data->result == HNS3_WAIT_SUCCESS)
- return 0;
- else if (wait_data->result == HNS3_WAIT_TIMEOUT) {
+ if (wait_data->result == HNS3_WAIT_SUCCESS) {
+ /*
+ * After vf reset is ready, the PF may not have completed
+ * the reset processing. The vf sending mbox to PF may fail
+ * during the pf reset, so it is better to add extra delay.
+ */
+ if (hw->reset.level == HNS3_VF_FUNC_RESET ||
+ hw->reset.level == HNS3_FLR_RESET)
+ return 0;
+ /* Reset retry process, no need to add extra delay. */
+ if (hw->reset.attempts)
+ return 0;
+ if (wait_data->check_completion == NULL)
+ return 0;
+
+ wait_data->check_completion = NULL;
+ wait_data->interval = 1 * MSEC_PER_SEC * USEC_PER_MSEC;
+ wait_data->count = 1;
+ wait_data->result = HNS3_WAIT_REQUEST;
+ rte_eal_alarm_set(wait_data->interval, hns3_wait_callback,
+ wait_data);
+ hns3_warn(hw, "hardware is ready, delay 1 sec for PF reset complete");
+ return -EAGAIN;
+ } else if (wait_data->result == HNS3_WAIT_TIMEOUT) {
gettimeofday(&tv, NULL);
hns3_warn(hw, "Reset step4 hardware not ready after reset time=%ld.%.6ld",
tv.tv_sec, tv.tv_usec);
struct rte_eth_dev *eth_dev;
eth_dev = &rte_eth_devices[hw->data->port_id];
- rte_eal_alarm_cancel(hns3vf_service_handler, eth_dev);
+ if (hw->adapter_state == HNS3_NIC_STARTED)
+ rte_eal_alarm_cancel(hns3vf_service_handler, eth_dev);
hw->mac.link_status = ETH_LINK_DOWN;
hns3_set_rxtx_function(eth_dev);
eth_dev = &rte_eth_devices[hw->data->port_id];
hns3_set_rxtx_function(eth_dev);
hns3_mp_req_start_rxtx(eth_dev);
+ if (hw->adapter_state == HNS3_NIC_STARTED)
+ hns3vf_service_handler(eth_dev);
+
+ return 0;
+}
+
+static int
+hns3vf_check_default_mac_change(struct hns3_hw *hw)
+{
+ char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
+ struct rte_ether_addr *hw_mac;
+ int ret;
+
+ /*
+ * The hns3 PF ethdev driver in kernel support setting VF MAC address
+ * on the host by "ip link set ..." command. If the hns3 PF kernel
+ * ethdev driver sets the MAC address for VF device after the
+ * initialization of the related VF device, the PF driver will notify
+ * VF driver to reset VF device to make the new MAC address effective
+ * immediately. The hns3 VF PMD driver should check whether the MAC
+ * address has been changed by the PF kernel ethdev driver, if changed
+ * VF driver should configure hardware using the new MAC address in the
+ * recovering hardware configuration stage of the reset process.
+ */
+ ret = hns3vf_get_host_mac_addr(hw);
+ if (ret)
+ return ret;
+
+ hw_mac = (struct rte_ether_addr *)hw->mac.mac_addr;
+ ret = rte_is_zero_ether_addr(hw_mac);
+ if (ret) {
+ rte_ether_addr_copy(&hw->data->mac_addrs[0], hw_mac);
+ } else {
+ ret = rte_is_same_ether_addr(&hw->data->mac_addrs[0], hw_mac);
+ if (!ret) {
+ rte_ether_addr_copy(hw_mac, &hw->data->mac_addrs[0]);
+ rte_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
+ &hw->data->mac_addrs[0]);
+ hns3_warn(hw, "Default MAC address has been changed to:"
+ " %s by the host PF kernel ethdev driver",
+ mac_str);
+ }
+ }
- hns3vf_service_handler(eth_dev);
return 0;
}
struct hns3_hw *hw = &hns->hw;
int ret;
+ ret = hns3vf_check_default_mac_change(hw);
+ if (ret)
+ return ret;
+
ret = hns3vf_configure_mac_addr(hns, false);
if (ret)
return ret;
rte_atomic16_set(&hns->hw.reset.schedule, SCHEDULE_REQUESTED);
hns3_err(hw, "Handling interrupts in delayed tasks");
hns3vf_interrupt_handler(&rte_eth_devices[hw->data->port_id]);
+ reset_level = hns3vf_get_reset_level(hw, &hw->reset.pending);
+ if (reset_level == HNS3_NONE_RESET) {
+ hns3_err(hw, "No reset level is set, try global reset");
+ hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
+ }
}
rte_atomic16_set(&hns->hw.reset.schedule, SCHEDULE_NONE);
static int
hns3vf_reinit_dev(struct hns3_adapter *hns)
{
+ struct rte_eth_dev *eth_dev = &rte_eth_devices[hns->hw.data->port_id];
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
struct hns3_hw *hw = &hns->hw;
int ret;
+ if (hw->reset.level == HNS3_VF_FULL_RESET) {
+ rte_intr_disable(&pci_dev->intr_handle);
+ hns3vf_set_bus_master(pci_dev, true);
+ }
+
/* Firmware command initialize */
ret = hns3_cmd_init(hw);
if (ret) {
hns3_err(hw, "Failed to init cmd: %d", ret);
- return ret;
+ goto err_cmd_init;
+ }
+
+ if (hw->reset.level == HNS3_VF_FULL_RESET) {
+ /*
+ * UIO enables msix by writing the pcie configuration space
+ * vfio_pci enables msix in rte_intr_enable.
+ */
+ if (pci_dev->kdrv == RTE_KDRV_IGB_UIO ||
+ pci_dev->kdrv == RTE_KDRV_UIO_GENERIC) {
+ if (hns3vf_enable_msix(pci_dev, true))
+ hns3_err(hw, "Failed to enable msix");
+ }
+
+ rte_intr_enable(&pci_dev->intr_handle);
}
ret = hns3_reset_all_queues(hns);
return 0;
+err_cmd_init:
+ hns3vf_set_bus_master(pci_dev, false);
err_init:
hns3_cmd_uninit(hw);
return ret;
.tx_queue_setup = hns3_tx_queue_setup,
.rx_queue_release = hns3_dev_rx_queue_release,
.tx_queue_release = hns3_dev_tx_queue_release,
+ .rx_queue_intr_enable = hns3_dev_rx_queue_intr_enable,
+ .rx_queue_intr_disable = hns3_dev_rx_queue_intr_disable,
.dev_configure = hns3vf_dev_configure,
.mac_addr_add = hns3vf_add_mac_addr,
.mac_addr_remove = hns3vf_remove_mac_addr,
}
rte_eal_alarm_set(HNS3VF_KEEP_ALIVE_INTERVAL, hns3vf_keep_alive_handler,
eth_dev);
- rte_eal_alarm_set(HNS3VF_SERVICE_INTERVAL, hns3vf_service_handler,
- eth_dev);
return 0;
err_rte_zmalloc: