uint16_t nb_rx_q = dev->data->nb_rx_queues;
uint16_t nb_tx_q = dev->data->nb_tx_queues;
struct rte_eth_rss_conf rss_conf;
+ uint32_t max_rx_pkt_len;
uint16_t mtu;
bool gro_en;
int ret;
* according to the maximum RX packet length.
*/
if (conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
- /*
- * Security of max_rx_pkt_len is guaranteed in dpdk frame.
- * Maximum value of max_rx_pkt_len is HNS3_MAX_FRAME_LEN, so it
- * can safely assign to "uint16_t" type variable.
- */
- mtu = (uint16_t)HNS3_PKTLEN_TO_MTU(conf->rxmode.max_rx_pkt_len);
+ max_rx_pkt_len = conf->rxmode.max_rx_pkt_len;
+ if (max_rx_pkt_len > HNS3_MAX_FRAME_LEN ||
+ max_rx_pkt_len <= HNS3_DEFAULT_FRAME_LEN) {
+ hns3_err(hw, "maximum Rx packet length must be greater "
+ "than %u and less than %u when jumbo frame enabled.",
+ (uint16_t)HNS3_DEFAULT_FRAME_LEN,
+ (uint16_t)HNS3_MAX_FRAME_LEN);
+ ret = -EINVAL;
+ goto cfg_err;
+ }
+
+ mtu = (uint16_t)HNS3_PKTLEN_TO_MTU(max_rx_pkt_len);
ret = hns3vf_dev_mtu_set(dev, mtu);
if (ret)
goto cfg_err;
DEV_TX_OFFLOAD_MBUF_FAST_FREE |
hns3_txvlan_cap_get(hw));
+ if (hns3_dev_outer_udp_cksum_supported(hw))
+ info->tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_UDP_CKSUM;
+
if (hns3_dev_indep_txrx_supported(hw))
info->dev_capa = RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP |
RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP;
info->vmdq_queue_num = 0;
- info->reta_size = HNS3_RSS_IND_TBL_SIZE;
+ info->reta_size = hw->rss_ind_tbl_size;
info->hash_key_size = HNS3_RSS_KEY_SIZE;
info->flow_type_rss_offloads = HNS3_ETH_RSS_SUPPORT;
info->default_rxportconf.ring_size = HNS3_DEFAULT_RING_DESC;
rst_ing_reg = hns3_read_dev(hw, HNS3_FUN_RST_ING);
hns3_warn(hw, "resetting reg: 0x%x", rst_ing_reg);
hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
- rte_atomic16_set(&hw->reset.disable_cmd, 1);
+ __atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
val = hns3_read_dev(hw, HNS3_VF_RST_ING);
hns3_write_dev(hw, HNS3_VF_RST_ING, val | HNS3_VF_RST_ING_BIT);
val = cmdq_stat_reg & ~BIT(HNS3_VECTOR0_RST_INT_B);
hw->intr.int_ql_max = rte_le_to_cpu_16(req0->intr_ql_max);
}
+static int
+hns3vf_check_dev_specifications(struct hns3_hw *hw)
+{
+ if (hw->rss_ind_tbl_size == 0 ||
+ hw->rss_ind_tbl_size > HNS3_RSS_IND_TBL_SIZE_MAX) {
+ hns3_warn(hw, "the size of hash lookup table configured (%u)"
+ " exceeds the maximum(%u)", hw->rss_ind_tbl_size,
+ HNS3_RSS_IND_TBL_SIZE_MAX);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int
hns3vf_query_dev_specifications(struct hns3_hw *hw)
{
hns3vf_parse_dev_specifications(hw, desc);
- return 0;
+ return hns3vf_check_dev_specifications(hw);
}
static int
hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_RSV_ONE;
hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_2US;
hw->tso_mode = HNS3_TSO_SW_CAL_PSEUDO_H_CSUM;
+ hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE1;
hw->min_tx_pkt_len = HNS3_HIP08_MIN_TX_PKT_LEN;
hw->rss_info.ipv6_sctp_offload_supported = false;
hw->promisc_mode = HNS3_UNLIMIT_PROMISC_MODE;
hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_ALL;
hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_1US;
hw->tso_mode = HNS3_TSO_HW_CAL_PSEUDO_H_CSUM;
+ hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE2;
hw->min_tx_pkt_len = HNS3_HIP09_MIN_TX_PKT_LEN;
hw->rss_info.ipv6_sctp_offload_supported = true;
hw->promisc_mode = HNS3_LIMIT_PROMISC_MODE;
hns3_err(hw, "Failed to fetch link status from PF: %d", ret);
}
+void
+hns3vf_update_link_status(struct hns3_hw *hw, uint8_t link_status,
+ uint32_t link_speed, uint8_t link_duplex)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
+ struct hns3_mac *mac = &hw->mac;
+ bool report_lse;
+ bool changed;
+
+ changed = mac->link_status != link_status ||
+ mac->link_speed != link_speed ||
+ mac->link_duplex != link_duplex;
+ if (!changed)
+ return;
+
+ /*
+ * VF's link status/speed/duplex were updated by polling from PF driver,
+ * because the link status/speed/duplex may be changed in the polling
+ * interval, so driver will report lse (lsc event) once any of the above
+ * thress variables changed.
+ * But if the PF's link status is down and driver saved link status is
+ * also down, there are no need to report lse.
+ */
+ report_lse = true;
+ if (link_status == ETH_LINK_DOWN && link_status == mac->link_status)
+ report_lse = false;
+
+ mac->link_status = link_status;
+ mac->link_speed = link_speed;
+ mac->link_duplex = link_duplex;
+
+ if (report_lse)
+ rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
+}
+
static int
hns3vf_vlan_filter_configure(struct hns3_adapter *hns, uint16_t vlan_id, int on)
{
if (ret)
goto err_get_config;
+ /* Hardware statistics of imissed registers cleared. */
+ ret = hns3_update_imissed_stats(hw, true);
+ if (ret) {
+ hns3_err(hw, "clear imissed stats failed, ret = %d", ret);
+ goto err_set_tc_queue;
+ }
+
ret = hns3vf_set_tc_queue_mapping(hns, hw->tqps_num, hw->tqps_num);
if (ret) {
PMD_INIT_LOG(ERR, "failed to set tc info, ret = %d.", ret);
if (ret)
goto err_set_tc_queue;
- hns3_set_default_rss_args(hw);
+ hns3_rss_set_default_args(hw);
return 0;
hw->mac.link_status = ETH_LINK_DOWN;
- if (rte_atomic16_read(&hw->reset.disable_cmd) == 0) {
+ /*
+ * The "hns3vf_do_stop" function will also be called by .stop_service to
+ * prepare reset. At the time of global or IMP reset, the command cannot
+ * be sent to stop the tx/rx queues. The mbuf in Tx/Rx queues may be
+ * accessed during the reset process. So the mbuf can not be released
+ * during reset and is required to be released after the reset is
+ * completed.
+ */
+ if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0)
+ hns3_dev_release_mbufs(hns);
+
+ if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0) {
hns3vf_configure_mac_addr(hns, true);
ret = hns3_reset_all_tqps(hns);
if (ret) {
hns3_stop_tqps(hw);
hns3vf_do_stop(hns);
hns3vf_unmap_rx_interrupt(dev);
- hns3_dev_release_mbufs(hns);
hw->adapter_state = HNS3_NIC_CONFIGURED;
}
hns3_rx_scattered_reset(dev);
new_link.link_speed = mac->link_speed;
break;
default:
- new_link.link_speed = ETH_SPEED_NUM_100M;
+ if (mac->link_status)
+ new_link.link_speed = ETH_SPEED_NUM_UNKNOWN;
+ else
+ new_link.link_speed = ETH_SPEED_NUM_NONE;
break;
}
if (ret)
return ret;
+ hns3_enable_rxd_adv_layout(hw);
+
ret = hns3_init_queues(hns, reset_queue);
if (ret)
hns3_err(hw, "failed to init queues, ret = %d.", ret);
return ret;
}
ret = hns3vf_map_rx_interrupt(dev);
- if (ret) {
- hw->adapter_state = HNS3_NIC_CONFIGURED;
- rte_spinlock_unlock(&hw->lock);
- return ret;
- }
+ if (ret)
+ goto map_rx_inter_err;
/*
* There are three register used to control the status of a TQP
* status of queue in the dpdk framework.
*/
ret = hns3_start_all_txqs(dev);
- if (ret) {
- hw->adapter_state = HNS3_NIC_CONFIGURED;
- rte_spinlock_unlock(&hw->lock);
- return ret;
- }
+ if (ret)
+ goto map_rx_inter_err;
ret = hns3_start_all_rxqs(dev);
- if (ret) {
- hns3_stop_all_txqs(dev);
- hw->adapter_state = HNS3_NIC_CONFIGURED;
- rte_spinlock_unlock(&hw->lock);
- return ret;
- }
+ if (ret)
+ goto start_all_rxqs_fail;
hw->adapter_state = HNS3_NIC_STARTED;
rte_spinlock_unlock(&hw->lock);
*/
hns3_start_tqps(hw);
+ return ret;
+
+start_all_rxqs_fail:
+ hns3_stop_all_txqs(dev);
+map_rx_inter_err:
+ (void)hns3vf_do_stop(hns);
+ hw->adapter_state = HNS3_NIC_CONFIGURED;
+ rte_spinlock_unlock(&hw->lock);
+
return ret;
}
hns3vf_prepare_reset(struct hns3_adapter *hns)
{
struct hns3_hw *hw = &hns->hw;
- int ret = 0;
+ int ret;
if (hw->reset.level == HNS3_VF_FUNC_RESET) {
ret = hns3_send_mbx_msg(hw, HNS3_MBX_RESET, 0, NULL,
0, true, NULL, 0);
+ if (ret)
+ return ret;
}
- rte_atomic16_set(&hw->reset.disable_cmd, 1);
+ __atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
- return ret;
+ return 0;
}
static int
struct rte_eth_dev *eth_dev;
eth_dev = &rte_eth_devices[hw->data->port_id];
- if (hw->adapter_state == HNS3_NIC_STARTED)
+ if (hw->adapter_state == HNS3_NIC_STARTED) {
rte_eal_alarm_cancel(hns3vf_service_handler, eth_dev);
+ hns3vf_update_link_status(hw, ETH_LINK_DOWN, hw->mac.link_speed,
+ hw->mac.link_duplex);
+ }
hw->mac.link_status = ETH_LINK_DOWN;
hns3_set_rxtx_function(eth_dev);
* from table space. Hence, for function reset software intervention is
* required to delete the entries.
*/
- if (rte_atomic16_read(&hw->reset.disable_cmd) == 0)
+ if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0)
hns3vf_configure_all_mc_mac_addr(hns, true);
rte_spinlock_unlock(&hw->lock);
* The interrupt may have been lost. It is necessary to handle
* the interrupt to recover from the error.
*/
- if (rte_atomic16_read(&hns->hw.reset.schedule) == SCHEDULE_DEFERRED) {
- rte_atomic16_set(&hns->hw.reset.schedule, SCHEDULE_REQUESTED);
+ if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
+ SCHEDULE_DEFERRED) {
+ __atomic_store_n(&hw->reset.schedule, SCHEDULE_REQUESTED,
+ __ATOMIC_RELAXED);
hns3_err(hw, "Handling interrupts in delayed tasks");
hns3vf_interrupt_handler(&rte_eth_devices[hw->data->port_id]);
reset_level = hns3vf_get_reset_level(hw, &hw->reset.pending);
hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
}
}
- rte_atomic16_set(&hns->hw.reset.schedule, SCHEDULE_NONE);
+ __atomic_store_n(&hw->reset.schedule, SCHEDULE_NONE, __ATOMIC_RELAXED);
/*
* Hardware reset has been notified, we now have to poll & check if
.rss_hash_conf_get = hns3_dev_rss_hash_conf_get,
.reta_update = hns3_dev_rss_reta_update,
.reta_query = hns3_dev_rss_reta_query,
- .filter_ctrl = hns3_dev_filter_ctrl,
+ .flow_ops_get = hns3_dev_flow_ops_get,
.vlan_filter_set = hns3vf_vlan_filter_set,
.vlan_offload_set = hns3vf_vlan_offload_set,
.get_reg = hns3_get_regs,
.dev_supported_ptypes_get = hns3_dev_supported_ptypes_get,
+ .tx_done_cleanup = hns3_tx_done_cleanup,
};
static const struct hns3_reset_ops hns3vf_reset_ops = {
hw->adapter_state = HNS3_NIC_UNINITIALIZED;
hns->is_vf = true;
hw->data = eth_dev->data;
+ hns3_parse_devargs(eth_dev);
ret = hns3_reset_init(hw);
if (ret)
hw->adapter_state = HNS3_NIC_INITIALIZED;
- if (rte_atomic16_read(&hns->hw.reset.schedule) == SCHEDULE_PENDING) {
+ if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
+ SCHEDULE_PENDING) {
hns3_err(hw, "Reschedule reset service after dev_init");
hns3_schedule_reset(hns);
} else {
err_mp_init_secondary:
eth_dev->dev_ops = NULL;
eth_dev->rx_pkt_burst = NULL;
+ eth_dev->rx_descriptor_status = NULL;
eth_dev->tx_pkt_burst = NULL;
eth_dev->tx_pkt_prepare = NULL;
+ eth_dev->tx_descriptor_status = NULL;
rte_free(eth_dev->process_private);
eth_dev->process_private = NULL;
RTE_PMD_REGISTER_PCI(net_hns3_vf, rte_hns3vf_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_hns3_vf, pci_id_hns3vf_map);
RTE_PMD_REGISTER_KMOD_DEP(net_hns3_vf, "* igb_uio | vfio-pci");
+RTE_PMD_REGISTER_PARAM_STRING(net_hns3_vf,
+ HNS3_DEVARG_RX_FUNC_HINT "=vec|sve|simple|common "
+ HNS3_DEVARG_TX_FUNC_HINT "=vec|sve|simple|common ");