/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2018-2019 Hisilicon Limited.
+ * Copyright(c) 2018-2021 HiSilicon Limited.
*/
-#include <errno.h>
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <string.h>
-#include <inttypes.h>
-#include <unistd.h>
-#include <rte_byteorder.h>
-#include <rte_common.h>
-#include <rte_cycles.h>
-#include <rte_dev.h>
-#include <rte_ethdev_driver.h>
+#include <ethdev_driver.h>
#include <rte_io.h>
-#include <rte_spinlock.h>
-#include <rte_pci.h>
-#include <rte_bus_pci.h>
#include "hns3_ethdev.h"
#include "hns3_regs.h"
#include "hns3_logs.h"
+#include "hns3_intr.h"
+#include "hns3_rxtx.h"
-#define HNS3_REG_MSG_DATA_OFFSET 4
#define HNS3_CMD_CODE_OFFSET 2
static const struct errno_respcode_map err_code_map[] = {
return -EIO;
}
-static void
-hns3_poll_all_sync_msg(void)
-{
- struct rte_eth_dev *eth_dev;
- struct hns3_adapter *adapter;
- const char *name;
- uint16_t port_id;
-
- RTE_ETH_FOREACH_DEV(port_id) {
- eth_dev = &rte_eth_devices[port_id];
- name = eth_dev->device->driver->name;
- if (strcmp(name, "net_hns3") && strcmp(name, "net_hns3_vf"))
- continue;
- adapter = eth_dev->data->dev_private;
- if (!adapter || adapter->hw.adapter_state == HNS3_NIC_CLOSED)
- continue;
- /* Synchronous msg, the mbx_resp.req_msg_data is non-zero */
- if (adapter->hw.mbx_resp.req_msg_data)
- hns3_dev_handle_mbx_msg(&adapter->hw);
- }
-}
-
static int
hns3_get_mbx_resp(struct hns3_hw *hw, uint16_t code0, uint16_t code1,
uint8_t *resp_data, uint16_t resp_len)
{
#define HNS3_MAX_RETRY_MS 500
+#define HNS3_WAIT_RESP_US 100
+ struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
struct hns3_mbx_resp_status *mbx_resp;
- bool in_irq = false;
uint64_t now;
uint64_t end;
if (resp_len > HNS3_MBX_MAX_RESP_DATA_SIZE) {
- hns3_err(hw, "VF mbx response len(=%d) exceeds maximum(=%d)",
+ hns3_err(hw, "VF mbx response len(=%u) exceeds maximum(=%d)",
resp_len, HNS3_MBX_MAX_RESP_DATA_SIZE);
return -EINVAL;
}
end = now + HNS3_MAX_RETRY_MS;
while ((hw->mbx_resp.head != hw->mbx_resp.tail + hw->mbx_resp.lost) &&
(now < end)) {
- /*
- * The mbox response is running on the interrupt thread.
- * Sending mbox in the interrupt thread cannot wait for the
- * response, so polling the mbox response on the irq thread.
- */
- if (pthread_equal(hw->irq_thread_id, pthread_self())) {
- in_irq = true;
- hns3_poll_all_sync_msg();
- } else {
- rte_delay_ms(HNS3_POLL_RESPONE_MS);
+ if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED)) {
+ hns3_err(hw, "Don't wait for mbx respone because of "
+ "disable_cmd");
+ return -EBUSY;
}
+
+ if (is_reset_pending(hns)) {
+ hw->mbx_resp.req_msg_data = 0;
+ hns3_err(hw, "Don't wait for mbx respone because of "
+ "reset pending");
+ return -EIO;
+ }
+
+ hns3_dev_handle_mbx_msg(hw);
+ rte_delay_us(HNS3_WAIT_RESP_US);
+
now = get_timeofday_ms();
}
hw->mbx_resp.req_msg_data = 0;
if (now >= end) {
hw->mbx_resp.lost++;
hns3_err(hw,
- "VF could not get mbx(%d,%d) head(%d) tail(%d) lost(%d) from PF in_irq:%d",
+ "VF could not get mbx(%u,%u) head(%u) tail(%u) "
+ "lost(%u) from PF",
code0, code1, hw->mbx_resp.head, hw->mbx_resp.tail,
- hw->mbx_resp.lost, in_irq);
+ hw->mbx_resp.lost);
return -ETIME;
}
rte_io_rmb();
{
struct hns3_mbx_vf_to_pf_cmd *req;
struct hns3_cmd_desc desc;
+ bool is_ring_vector_msg;
+ int offset;
int ret;
req = (struct hns3_mbx_vf_to_pf_cmd *)desc.data;
/* first two bytes are reserved for code & subcode */
if (msg_len > (HNS3_MBX_MAX_MSG_SIZE - HNS3_CMD_CODE_OFFSET)) {
hns3_err(hw,
- "VF send mbx msg fail, msg len %d exceeds max payload len %d",
+ "VF send mbx msg fail, msg len %u exceeds max payload len %d",
msg_len, HNS3_MBX_MAX_MSG_SIZE - HNS3_CMD_CODE_OFFSET);
return -EINVAL;
}
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MBX_VF_TO_PF, false);
req->msg[0] = code;
- req->msg[1] = subcode;
- if (msg_data)
- memcpy(&req->msg[HNS3_CMD_CODE_OFFSET], msg_data, msg_len);
+ is_ring_vector_msg = (code == HNS3_MBX_MAP_RING_TO_VECTOR) ||
+ (code == HNS3_MBX_UNMAP_RING_TO_VECTOR) ||
+ (code == HNS3_MBX_GET_RING_VECTOR_MAP);
+ if (!is_ring_vector_msg)
+ req->msg[1] = subcode;
+ if (msg_data) {
+ offset = is_ring_vector_msg ? 1 : HNS3_CMD_CODE_OFFSET;
+ memcpy(&req->msg[offset], msg_data, msg_len);
+ }
/* synchronous send */
if (need_resp) {
hw->mbx_resp.head++;
ret = hns3_cmd_send(hw, &desc, 1);
if (ret) {
+ hw->mbx_resp.head--;
rte_spinlock_unlock(&hw->mbx_resp.lock);
hns3_err(hw, "VF failed(=%d) to send mbx message to PF",
ret);
static void
hns3_mbx_handler(struct hns3_hw *hw)
{
- struct hns3_mac *mac = &hw->mac;
enum hns3_reset_level reset_level;
+ uint8_t link_status, link_duplex;
+ uint8_t support_push_lsc;
+ uint32_t link_speed;
uint16_t *msg_q;
+ uint8_t opcode;
uint32_t tail;
tail = hw->arq.tail;
while (tail != hw->arq.head) {
msg_q = hw->arq.msg_q[hw->arq.head];
- switch (msg_q[0]) {
+ opcode = msg_q[0] & 0xff;
+ switch (opcode) {
case HNS3_MBX_LINK_STAT_CHANGE:
- memcpy(&mac->link_speed, &msg_q[2],
- sizeof(mac->link_speed));
- mac->link_status = rte_le_to_cpu_16(msg_q[1]);
- mac->link_duplex = (uint8_t)rte_le_to_cpu_16(msg_q[4]);
+ memcpy(&link_speed, &msg_q[2], sizeof(link_speed));
+ link_status = rte_le_to_cpu_16(msg_q[1]);
+ link_duplex = (uint8_t)rte_le_to_cpu_16(msg_q[4]);
+ hns3vf_update_link_status(hw, link_status, link_speed,
+ link_duplex);
+ support_push_lsc = (*(uint8_t *)&msg_q[5]) & 1u;
+ hns3vf_update_push_lsc_cap(hw, support_push_lsc);
break;
case HNS3_MBX_ASSERTING_RESET:
/* PF has asserted reset hence VF should go in pending
hns3_warn(hw, "PF inform reset level %d", reset_level);
hw->reset.stats.request_cnt++;
+ hns3_schedule_reset(HNS3_DEV_HW_TO_ADAPTER(hw));
break;
default:
- hns3_err(hw, "Fetched unsupported(%d) message from arq",
- msg_q[0]);
+ hns3_err(hw, "Fetched unsupported(%u) message from arq",
+ opcode);
break;
}
if (resp->lost)
resp->lost--;
hns3_warn(hw, "Received a mismatched response req_msg(%x) "
- "resp_msg(%x) head(%d) tail(%d) lost(%d)",
+ "resp_msg(%x) head(%u) tail(%u) lost(%u)",
resp->req_msg_data, resp_msg, resp->head, tail,
resp->lost);
} else if (tail + resp->lost > resp->head) {
resp->lost--;
hns3_warn(hw, "Received a new response again resp_msg(%x) "
- "head(%d) tail(%d) lost(%d)", resp_msg,
+ "head(%u) tail(%u) lost(%u)", resp_msg,
resp->head, tail, resp->lost);
}
rte_io_wmb();
resp->tail = tail;
}
+static void
+hns3_link_fail_parse(struct hns3_hw *hw, uint8_t link_fail_code)
+{
+ switch (link_fail_code) {
+ case HNS3_MBX_LF_NORMAL:
+ break;
+ case HNS3_MBX_LF_REF_CLOCK_LOST:
+ hns3_warn(hw, "Reference clock lost!");
+ break;
+ case HNS3_MBX_LF_XSFP_TX_DISABLE:
+ hns3_warn(hw, "SFP tx is disabled!");
+ break;
+ case HNS3_MBX_LF_XSFP_ABSENT:
+ hns3_warn(hw, "SFP is absent!");
+ break;
+ default:
+ hns3_warn(hw, "Unknown fail code:%u!", link_fail_code);
+ break;
+ }
+}
+
+static void
+hns3_handle_link_change_event(struct hns3_hw *hw,
+ struct hns3_mbx_pf_to_vf_cmd *req)
+{
+#define LINK_STATUS_OFFSET 1
+#define LINK_FAIL_CODE_OFFSET 2
+
+ if (!req->msg[LINK_STATUS_OFFSET])
+ hns3_link_fail_parse(hw, req->msg[LINK_FAIL_CODE_OFFSET]);
+
+ hns3_update_linkstatus_and_event(hw, true);
+}
+
+static void
+hns3_update_port_base_vlan_info(struct hns3_hw *hw,
+ struct hns3_mbx_pf_to_vf_cmd *req)
+{
+#define PVID_STATE_OFFSET 1
+ uint16_t new_pvid_state = req->msg[PVID_STATE_OFFSET] ?
+ HNS3_PORT_BASE_VLAN_ENABLE : HNS3_PORT_BASE_VLAN_DISABLE;
+ /*
+ * Currently, hardware doesn't support more than two layers VLAN offload
+ * based on hns3 network engine, which would cause packets loss or wrong
+ * packets for these types of packets. If the hns3 PF kernel ethdev
+ * driver sets the PVID for VF device after initialization of the
+ * related VF device, the PF driver will notify VF driver to update the
+ * PVID configuration state. The VF driver will update the PVID
+ * configuration state immediately to ensure that the VLAN process in Tx
+ * and Rx is correct. But in the window period of this state transition,
+ * packets loss or packets with wrong VLAN may occur.
+ */
+ if (hw->port_base_vlan_cfg.state != new_pvid_state) {
+ hw->port_base_vlan_cfg.state = new_pvid_state;
+ hns3_update_all_queues_pvid_proc_en(hw);
+ }
+}
+
+static void
+hns3_handle_promisc_info(struct hns3_hw *hw, uint16_t promisc_en)
+{
+ if (!promisc_en) {
+ /*
+ * When promisc/allmulti mode is closed by the hns3 PF kernel
+ * ethdev driver for untrusted, modify VF's related status.
+ */
+ hns3_warn(hw, "Promisc mode will be closed by host for being "
+ "untrusted.");
+ hw->data->promiscuous = 0;
+ hw->data->all_multicast = 0;
+ }
+}
+
void
hns3_dev_handle_mbx_msg(struct hns3_hw *hw)
{
struct hns3_cmd_desc *desc;
uint32_t msg_data;
uint16_t *msg_q;
+ uint8_t opcode;
uint16_t flag;
uint8_t *temp;
int i;
+ rte_spinlock_lock(&hw->cmq.crq.lock);
+
while (!hns3_cmd_crq_empty(hw)) {
- if (rte_atomic16_read(&hw->reset.disable_cmd))
+ if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED)) {
+ rte_spinlock_unlock(&hw->cmq.crq.lock);
return;
+ }
desc = &crq->desc[crq->next_to_use];
req = (struct hns3_mbx_pf_to_vf_cmd *)desc->data;
+ opcode = req->msg[0] & 0xff;
flag = rte_le_to_cpu_16(crq->desc[crq->next_to_use].flag);
if (unlikely(!hns3_get_bit(flag, HNS3_CMDQ_RX_OUTVLD_B))) {
hns3_warn(hw,
- "dropped invalid mailbox message, code = %d",
- req->msg[0]);
+ "dropped invalid mailbox message, code = %u",
+ opcode);
/* dropping/not processing this invalid message */
crq->desc[crq->next_to_use].flag = 0;
continue;
}
- switch (req->msg[0]) {
+ switch (opcode) {
case HNS3_MBX_PF_VF_RESP:
resp->resp_status = hns3_resp_to_errno(req->msg[3]);
temp = (uint8_t *)&req->msg[4];
- for (i = 0; i < HNS3_MBX_MAX_RESP_DATA_SIZE &&
- i < HNS3_REG_MSG_DATA_OFFSET; i++) {
+ for (i = 0; i < HNS3_MBX_MAX_RESP_DATA_SIZE; i++) {
resp->additional_info[i] = *temp;
temp++;
}
hns3_mbx_handler(hw);
break;
+ case HNS3_MBX_PUSH_LINK_STATUS:
+ hns3_handle_link_change_event(hw, req);
+ break;
+ case HNS3_MBX_PUSH_VLAN_INFO:
+ /*
+ * When the PVID configuration status of VF device is
+ * changed by the hns3 PF kernel driver, VF driver will
+ * receive this mailbox message from PF driver.
+ */
+ hns3_update_port_base_vlan_info(hw, req);
+ break;
+ case HNS3_MBX_PUSH_PROMISC_INFO:
+ /*
+ * When the trust status of VF device changed by the
+ * hns3 PF kernel driver, VF driver will receive this
+ * mailbox message from PF driver.
+ */
+ hns3_handle_promisc_info(hw, req->msg[1]);
+ break;
default:
hns3_err(hw,
- "VF received unsupported(%d) mbx msg from PF",
+ "VF received unsupported(%u) mbx msg from PF",
req->msg[0]);
break;
}
/* Write back CMDQ_RQ header pointer, IMP need this pointer */
hns3_write_dev(hw, HNS3_CMDQ_RX_HEAD_REG, crq->next_to_use);
+
+ rte_spinlock_unlock(&hw->cmq.crq.lock);
}