*/
#define I40E_FW_API_VERSION_MAJOR 0x0001
-#define I40E_FW_API_VERSION_MINOR 0x0005
+#define I40E_FW_API_VERSION_MINOR_X722 0x0005
+#define I40E_FW_API_VERSION_MINOR_X710 0x0007
+
+#define I40E_FW_MINOR_VERSION(_h) ((_h)->mac.type == I40E_MAC_XL710 ? \
+ I40E_FW_API_VERSION_MINOR_X710 : \
+ I40E_FW_API_VERSION_MINOR_X722)
+
+/* API version 1.7 implements additional link and PHY-specific APIs */
+#define I40E_MINOR_VER_GET_LINK_INFO_XL710 0x0007
struct i40e_aq_desc {
__le16 flags;
/* DCB commands */
i40e_aqc_opc_dcb_ignore_pfc = 0x0301,
i40e_aqc_opc_dcb_updated = 0x0302,
+ i40e_aqc_opc_set_dcb_parameters = 0x0303,
/* TX scheduler */
i40e_aqc_opc_configure_vsi_bw_limit = 0x0400,
i40e_aqc_opc_set_phy_debug = 0x0622,
i40e_aqc_opc_upload_ext_phy_fm = 0x0625,
i40e_aqc_opc_run_phy_activity = 0x0626,
+ i40e_aqc_opc_set_phy_register = 0x0628,
+ i40e_aqc_opc_get_phy_register = 0x0629,
/* NVM commands */
i40e_aqc_opc_nvm_read = 0x0701,
i40e_aqc_opc_nvm_update = 0x0703,
i40e_aqc_opc_nvm_config_read = 0x0704,
i40e_aqc_opc_nvm_config_write = 0x0705,
+ i40e_aqc_opc_nvm_progress = 0x0706,
i40e_aqc_opc_oem_post_update = 0x0720,
i40e_aqc_opc_thermal_sensor = 0x0721,
#define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002
#define I40E_AQ_SET_SWITCH_CFG_HW_ATR_EVICT 0x0004
__le16 valid_flags;
- u8 reserved[12];
+ /* The ethertype in switch_tag is dropped on ingress and used
+ * internally by the switch. Set this to zero for the default
+ * of 0x88a8 (802.1ad). Should be zero for firmware API
+ * versions lower than 1.7.
+ */
+ __le16 switch_tag;
+ /* The ethertypes in first_tag and second_tag are used to
+ * match the outer and inner VLAN tags (respectively) when HW
+ * double VLAN tagging is enabled via the set port parameters
+ * AQ command. Otherwise these are both ignored. Set them to
+ * zero for their defaults of 0x8100 (802.1Q). Should be zero
+ * for firmware API versions lower than 1.7.
+ */
+ __le16 first_tag;
+ __le16 second_tag;
+ u8 reserved[6];
};
I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
I40E_PHY_TYPE_10GBASE_CR1_CU = 0xB,
I40E_PHY_TYPE_10GBASE_AOC = 0xC,
I40E_PHY_TYPE_40GBASE_AOC = 0xD,
+ I40E_PHY_TYPE_UNRECOGNIZED = 0xE,
+ I40E_PHY_TYPE_UNSUPPORTED = 0xF,
I40E_PHY_TYPE_100BASE_TX = 0x11,
I40E_PHY_TYPE_1000BASE_T = 0x12,
I40E_PHY_TYPE_10GBASE_T = 0x13,
I40E_PHY_TYPE_25GBASE_CR = 0x20,
I40E_PHY_TYPE_25GBASE_SR = 0x21,
I40E_PHY_TYPE_25GBASE_LR = 0x22,
- I40E_PHY_TYPE_MAX
+ I40E_PHY_TYPE_25GBASE_AOC = 0x23,
+ I40E_PHY_TYPE_25GBASE_ACC = 0x24,
+ I40E_PHY_TYPE_MAX,
+ I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP = 0xFD,
+ I40E_PHY_TYPE_EMPTY = 0xFE,
+ I40E_PHY_TYPE_DEFAULT = 0xFF,
};
#define I40E_LINK_SPEED_100MB_SHIFT 0x1
#define I40E_AQ_PHY_TYPE_EXT_25G_CR 0x02
#define I40E_AQ_PHY_TYPE_EXT_25G_SR 0x04
#define I40E_AQ_PHY_TYPE_EXT_25G_LR 0x08
+#define I40E_AQ_PHY_TYPE_EXT_25G_AOC 0x10
+#define I40E_AQ_PHY_TYPE_EXT_25G_ACC 0x20
u8 fec_cfg_curr_mod_ext_info;
#define I40E_AQ_ENABLE_FEC_KR 0x01
#define I40E_AQ_ENABLE_FEC_RS 0x02
#define I40E_AQ_25G_SERDES_UCODE_ERR 0X04
#define I40E_AQ_25G_NIMB_UCODE_ERR 0X05
u8 loopback; /* use defines from i40e_aqc_set_lb_mode */
+/* Since firmware API 1.7 loopback field keeps power class info as well */
+#define I40E_AQ_LOOPBACK_MASK 0x07
+#define I40E_AQ_PWR_CLASS_SHIFT_LB 6
+#define I40E_AQ_PWR_CLASS_MASK_LB (0x03 << I40E_AQ_PWR_CLASS_SHIFT_LB)
__le16 max_frame_size;
u8 config;
#define I40E_AQ_CONFIG_FEC_KR_ENA 0x01
#define I40E_AQ_CONFIG_FEC_RS_ENA 0x02
#define I40E_AQ_CONFIG_CRC_ENA 0x04
#define I40E_AQ_CONFIG_PACING_MASK 0x78
- u8 power_desc;
+ union {
+ struct {
+ u8 power_desc;
#define I40E_AQ_LINK_POWER_CLASS_1 0x00
#define I40E_AQ_LINK_POWER_CLASS_2 0x01
#define I40E_AQ_LINK_POWER_CLASS_3 0x02
#define I40E_AQ_LINK_POWER_CLASS_4 0x03
#define I40E_AQ_PWR_CLASS_MASK 0x03
- u8 reserved[4];
+ u8 reserved[4];
+ };
+ struct {
+ u8 link_type[4];
+ u8 link_type_ext;
+ };
+ };
};
I40E_CHECK_CMD_LENGTH(i40e_aqc_get_link_status);
I40E_CHECK_CMD_LENGTH(i40e_aqc_run_phy_activity);
+/* Set PHY Register command (0x0628) */
+/* Get PHY Register command (0x0629) */
+struct i40e_aqc_phy_register_access {
+ u8 phy_interface;
+#define I40E_AQ_PHY_REG_ACCESS_INTERNAL 0
+#define I40E_AQ_PHY_REG_ACCESS_EXTERNAL 1
+#define I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE 2
+ u8 dev_addres;
+ u8 reserved1[2];
+ __le32 reg_address;
+ __le32 reg_value;
+ u8 reserved2[4];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_phy_register_access);
+
/* NVM Read command (indirect 0x0701)
* NVM Erase commands (direct 0x0702)
* NVM Update commands (indirect 0x0703)
*/
struct i40e_aqc_nvm_update {
u8 command_flags;
-#define I40E_AQ_NVM_LAST_CMD 0x01
-#define I40E_AQ_NVM_FLASH_ONLY 0x80
+#define I40E_AQ_NVM_LAST_CMD 0x01
+#define I40E_AQ_NVM_FLASH_ONLY 0x80
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_SHIFT 1
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_MASK 0x03
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_SELECTED 0x03
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_ALL 0x01
u8 module_pointer;
__le16 length;
__le32 offset;
I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_start);
+/* Set DCB (direct 0x0303) */
+struct i40e_aqc_set_dcb_parameters {
+ u8 command;
+#define I40E_AQ_DCB_SET_AGENT 0x1
+#define I40E_DCB_VALID 0x1
+ u8 valid_flags;
+ u8 reserved[14];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_set_dcb_parameters);
+
/* Get CEE DCBX Oper Config (0x0A07)
* uses the generic descriptor struct
* returns below as indirect response
git.droids-corp.org / dpdk.git / blobdiff