case I40E_DEV_ID_25G_SFP28:
hw->mac.type = I40E_MAC_XL710;
break;
-#ifdef X722_SUPPORT
#ifdef X722_A0_SUPPORT
case I40E_DEV_ID_X722_A0:
#endif
case I40E_DEV_ID_SFP_I_X722:
hw->mac.type = I40E_MAC_X722;
break;
-#endif
-#ifdef X722_SUPPORT
#if defined(INTEGRATED_VF) || defined(VF_DRIVER)
case I40E_DEV_ID_X722_VF:
#ifdef X722_A0_SUPPORT
hw->mac.type = I40E_MAC_X722_VF;
break;
#endif /* INTEGRATED_VF || VF_DRIVER */
-#endif /* X722_SUPPORT */
#if defined(INTEGRATED_VF) || defined(VF_DRIVER)
case I40E_DEV_ID_VF:
case I40E_DEV_ID_VF_HV:
return status;
}
-#ifndef I40E_NDIS_SUPPORT
/**
* i40e_aq_str - convert AQ err code to a string
* @hw: pointer to the HW structure
return hw->err_str;
}
-#endif /* I40E_NDIS_SUPPORT */
/**
* i40e_debug_aq
* @hw: debug mask related to admin queue
return status;
}
-#ifdef X722_SUPPORT
/**
* i40e_aq_get_set_rss_lut
{
return i40e_aq_get_set_rss_key(hw, vsi_id, key, true);
}
-#endif /* X722_SUPPORT */
/* The i40e_ptype_lookup table is used to convert from the 8-bit ptype in the
* hardware to a bit-field that can be used by SW to more easily determine the
switch (hw->mac.type) {
case I40E_MAC_XL710:
-#ifdef X722_SUPPORT
case I40E_MAC_X722:
-#endif
break;
default:
return I40E_ERR_DEVICE_NOT_SUPPORTED;
else
hw->pf_id = (u8)(func_rid & 0x7);
-#ifdef X722_SUPPORT
if (hw->mac.type == I40E_MAC_X722)
hw->flags |= I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE;
-#endif
status = i40e_init_nvm(hw);
return status;
}
hw_link_info->link_speed = (enum i40e_aq_link_speed)resp->link_speed;
hw_link_info->link_info = resp->link_info;
hw_link_info->an_info = resp->an_info;
+ hw_link_info->fec_info = resp->config & (I40E_AQ_CONFIG_FEC_KR_ENA |
+ I40E_AQ_CONFIG_FEC_RS_ENA);
hw_link_info->ext_info = resp->ext_info;
hw_link_info->loopback = resp->loopback;
hw_link_info->max_frame_size = LE16_TO_CPU(resp->max_frame_size);
return status;
}
+/**
+ * i40e_aq_set_vsi_bc_promisc_on_vlan
+ * @hw: pointer to the hw struct
+ * @seid: vsi number
+ * @enable: set broadcast promiscuous enable/disable for a given VLAN
+ * @vid: The VLAN tag filter - capture any broadcast packet with this VLAN tag
+ * @cmd_details: pointer to command details structure or NULL
+ **/
+enum i40e_status_code i40e_aq_set_vsi_bc_promisc_on_vlan(struct i40e_hw *hw,
+ u16 seid, bool enable, u16 vid,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_set_vsi_promiscuous_modes *cmd =
+ (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw;
+ enum i40e_status_code status;
+ u16 flags = 0;
+
+ i40e_fill_default_direct_cmd_desc(&desc,
+ i40e_aqc_opc_set_vsi_promiscuous_modes);
+
+ if (enable)
+ flags |= I40E_AQC_SET_VSI_PROMISC_BROADCAST;
+
+ cmd->promiscuous_flags = CPU_TO_LE16(flags);
+ cmd->valid_flags = CPU_TO_LE16(I40E_AQC_SET_VSI_PROMISC_BROADCAST);
+ cmd->seid = CPU_TO_LE16(seid);
+ cmd->vlan_tag = CPU_TO_LE16(vid | I40E_AQC_SET_VSI_VLAN_VALID);
+
+ status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+ return status;
+}
+
/**
* i40e_aq_set_vsi_broadcast
* @hw: pointer to the hw struct
if (number & I40E_NVM_MGMT_UPDATE_DISABLED)
p->update_disabled = true;
break;
-#ifdef X722_SUPPORT
case I40E_AQ_CAP_ID_WOL_AND_PROXY:
hw->num_wol_proxy_filters = (u16)number;
hw->wol_proxy_vsi_seid = (u16)logical_id;
"HW Capability: WOL proxy filters = %d\n",
hw->num_wol_proxy_filters);
break;
-#endif
default:
break;
}
/* partition id is 1-based, and functions are evenly spread
* across the ports as partitions
*/
- hw->partition_id = (hw->pf_id / hw->num_ports) + 1;
- hw->num_partitions = num_functions / hw->num_ports;
+ if (hw->num_ports != 0) {
+ hw->partition_id = (hw->pf_id / hw->num_ports) + 1;
+ hw->num_partitions = num_functions / hw->num_ports;
+ }
/* additional HW specific goodies that might
* someday be HW version specific
/**
* i40e_aq_add_udp_tunnel
* @hw: pointer to the hw struct
- * @udp_port: the UDP port to add
+ * @udp_port: the UDP port to add in Host byte order
* @header_len: length of the tunneling header length in DWords
* @protocol_index: protocol index type
* @filter_index: pointer to filter index
* @cmd_details: pointer to command details structure or NULL
+ *
+ * Note: Firmware expects the udp_port value to be in Little Endian format,
+ * and this function will call CPU_TO_LE16 to convert from Host byte order to
+ * Little Endian order.
**/
enum i40e_status_code i40e_aq_add_udp_tunnel(struct i40e_hw *hw,
u16 udp_port, u8 protocol_index,
I40E_SUCCESS, NULL, 0, NULL);
}
#endif /* VF_DRIVER */
-#ifdef X722_SUPPORT
/**
* i40e_aq_set_arp_proxy_config
CPU_TO_LE32(I40E_HI_DWORD((u64)proxy_config));
desc.params.external.addr_low =
CPU_TO_LE32(I40E_LO_DWORD((u64)proxy_config));
- desc.datalen = sizeof(struct i40e_aqc_arp_proxy_data);
+ desc.datalen = CPU_TO_LE16(sizeof(struct i40e_aqc_arp_proxy_data));
status = i40e_asq_send_command(hw, &desc, proxy_config,
sizeof(struct i40e_aqc_arp_proxy_data),
CPU_TO_LE32(I40E_HI_DWORD((u64)ns_proxy_table_entry));
desc.params.external.addr_low =
CPU_TO_LE32(I40E_LO_DWORD((u64)ns_proxy_table_entry));
- desc.datalen = sizeof(struct i40e_aqc_ns_proxy_data);
+ desc.datalen = CPU_TO_LE16(sizeof(struct i40e_aqc_ns_proxy_data));
status = i40e_asq_send_command(hw, &desc, ns_proxy_table_entry,
sizeof(struct i40e_aqc_ns_proxy_data),
cmd->valid_flags = CPU_TO_LE16(valid_flags);
buff_len = sizeof(*filter);
- desc.datalen = buff_len;
+ desc.datalen = CPU_TO_LE16(buff_len);
desc.flags |= CPU_TO_LE16((u16)I40E_AQ_FLAG_BUF);
desc.flags |= CPU_TO_LE16((u16)I40E_AQ_FLAG_RD);
status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
return status;
-}
-#endif /* X722_SUPPORT */
+}
\ No newline at end of file
git.droids-corp.org / dpdk.git / blobdiff