/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2001-2018
+ * Copyright(c) 2001-2020 Intel Corporation
*/
#ifndef _VIRTCHNL_H_
#define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM
#define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED
+#define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT 0x0
#define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1
#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2
#define VIRTCHNL_LINK_SPEED_10GB_SHIFT 0x3
#define VIRTCHNL_LINK_SPEED_40GB_SHIFT 0x4
#define VIRTCHNL_LINK_SPEED_20GB_SHIFT 0x5
#define VIRTCHNL_LINK_SPEED_25GB_SHIFT 0x6
+#define VIRTCHNL_LINK_SPEED_5GB_SHIFT 0x7
enum virtchnl_link_speed {
VIRTCHNL_LINK_SPEED_UNKNOWN = 0,
VIRTCHNL_LINK_SPEED_40GB = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT),
VIRTCHNL_LINK_SPEED_20GB = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT),
VIRTCHNL_LINK_SPEED_25GB = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT),
+ VIRTCHNL_LINK_SPEED_2_5GB = BIT(VIRTCHNL_LINK_SPEED_2_5GB_SHIFT),
+ VIRTCHNL_LINK_SPEED_5GB = BIT(VIRTCHNL_LINK_SPEED_5GB_SHIFT),
};
/* for hsplit_0 field of Rx HMC context */
#define VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010
#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020
#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES 0x00000040
+#define VIRTCHNL_VF_OFFLOAD_CRC 0x00000080
#define VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000
#define VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000
#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
#define VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000
#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000
#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM 0X00400000
-
+/* Define below the capability flags that are not offloads */
+#define VIRTCHNL_VF_CAP_ADV_LINK_SPEED 0x00000080
#define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \
VIRTCHNL_VF_OFFLOAD_VLAN | \
VIRTCHNL_VF_OFFLOAD_RSS_PF)
/* VIRTCHNL_OP_CONFIG_RX_QUEUE
* VF sends this message to set up parameters for one RX queue.
* External data buffer contains one instance of virtchnl_rxq_info.
- * PF configures requested queue and returns a status code.
+ * PF configures requested queue and returns a status code. The
+ * crc_disable flag disables CRC stripping on the VF. Setting
+ * the crc_disable flag to 1 will disable CRC stripping for each
+ * queue in the VF where the flag is set. The VIRTCHNL_VF_OFFLOAD_CRC
+ * offload must have been set prior to sending this info or the PF
+ * will ignore the request. This flag should be set the same for
+ * all of the queues for a VF.
*/
/* Rx queue config info */
u16 splithdr_enabled; /* deprecated with AVF 1.0 */
u32 databuffer_size;
u32 max_pkt_size;
- u32 pad1;
+ u8 crc_disable;
+ u8 pad1[3];
u64 dma_ring_addr;
enum virtchnl_rx_hsplit rx_split_pos; /* deprecated with AVF 1.0 */
u32 pad2;
* PF removes the filters and returns status.
*/
+/* VIRTCHNL_ETHER_ADDR_LEGACY
+ * Prior to adding the @type member to virtchnl_ether_addr, there were 2 pad
+ * bytes. Moving forward all VF drivers should not set type to
+ * VIRTCHNL_ETHER_ADDR_LEGACY. This is only here to not break previous/legacy
+ * behavior. The control plane function (i.e. PF) can use a best effort method
+ * of tracking the primary/device unicast in this case, but there is no
+ * guarantee and functionality depends on the implementation of the PF.
+ */
+
+/* VIRTCHNL_ETHER_ADDR_PRIMARY
+ * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_PRIMARY for the
+ * primary/device unicast MAC address filter for VIRTCHNL_OP_ADD_ETH_ADDR and
+ * VIRTCHNL_OP_DEL_ETH_ADDR. This allows for the underlying control plane
+ * function (i.e. PF) to accurately track and use this MAC address for
+ * displaying on the host and for VM/function reset.
+ */
+
+/* VIRTCHNL_ETHER_ADDR_EXTRA
+ * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_EXTRA for any extra
+ * unicast and/or multicast filters that are being added/deleted via
+ * VIRTCHNL_OP_DEL_ETH_ADDR/VIRTCHNL_OP_ADD_ETH_ADDR respectively.
+ */
struct virtchnl_ether_addr {
u8 addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
- u8 pad[2];
+ u8 type;
+#define VIRTCHNL_ETHER_ADDR_LEGACY 0
+#define VIRTCHNL_ETHER_ADDR_PRIMARY 1
+#define VIRTCHNL_ETHER_ADDR_EXTRA 2
+#define VIRTCHNL_ETHER_ADDR_TYPE_MASK 3 /* first two bits of type are valid */
+ u8 pad;
};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr);
struct virtchnl_pf_event {
enum virtchnl_event_codes event;
union {
+ /* If the PF driver does not support the new speed reporting
+ * capabilities then use link_event else use link_event_adv to
+ * get the speed and link information. The ability to understand
+ * new speeds is indicated by setting the capability flag
+ * VIRTCHNL_VF_CAP_ADV_LINK_SPEED in vf_cap_flags parameter
+ * in virtchnl_vf_resource struct and can be used to determine
+ * which link event struct to use below.
+ */
struct {
enum virtchnl_link_speed link_speed;
bool link_status;
} link_event;
+ struct {
+ /* link_speed provided in Mbps */
+ u32 link_speed;
+ u8 link_status;
+ } link_event_adv;
} event_data;
int severity;
git.droids-corp.org / dpdk.git / blobdiff