net/i40e: set VF TC max bandwidth from PF

[dpdk.git] / drivers / net / i40e / i40e_ethdev.c

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index cf89882..deff3ac 100644 (file)
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -11473,3 +11473,121 @@ rte_pmd_i40e_set_vf_tc_bw_alloc(uint8_t port, uint16_t vf_id,
 
        return 0;
 }
+
+int
+rte_pmd_i40e_set_vf_tc_max_bw(uint8_t port, uint16_t vf_id,
+                             uint8_t tc_no, uint32_t bw)
+{
+       struct rte_eth_dev *dev;
+       struct i40e_pf *pf;
+       struct i40e_vsi *vsi;
+       struct i40e_hw *hw;
+       struct i40e_aqc_configure_vsi_ets_sla_bw_data tc_bw;
+       int ret = 0;
+       int i;
+
+       RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+       dev = &rte_eth_devices[port];
+
+       if (!is_device_supported(dev, &rte_i40e_pmd))
+               return -ENOTSUP;
+
+       pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+
+       if (vf_id >= pf->vf_num || !pf->vfs) {
+               PMD_DRV_LOG(ERR, "Invalid VF ID.");
+               return -EINVAL;
+       }
+
+       vsi = pf->vfs[vf_id].vsi;
+       if (!vsi) {
+               PMD_DRV_LOG(ERR, "Invalid VSI.");
+               return -EINVAL;
+       }
+
+       if (bw > I40E_QOS_BW_MAX) {
+               PMD_DRV_LOG(ERR, "Bandwidth should not be larger than %dMbps.",
+                           I40E_QOS_BW_MAX);
+               return -EINVAL;
+       }
+
+       if (bw % I40E_QOS_BW_GRANULARITY) {
+               PMD_DRV_LOG(ERR, "Bandwidth should be the multiple of %dMbps.",
+                           I40E_QOS_BW_GRANULARITY);
+               return -EINVAL;
+       }
+
+       bw /= I40E_QOS_BW_GRANULARITY;
+
+       if (tc_no >= I40E_MAX_TRAFFIC_CLASS) {
+               PMD_DRV_LOG(ERR, "TC No. should be less than %d.",
+                           I40E_MAX_TRAFFIC_CLASS);
+               return -EINVAL;
+       }
+
+       hw = I40E_VSI_TO_HW(vsi);
+
+       if (!(vsi->enabled_tc & BIT_ULL(tc_no))) {
+               PMD_DRV_LOG(ERR, "VF %d TC %d isn't enabled.",
+                           vf_id, tc_no);
+               return -EINVAL;
+       }
+
+       /* No change. */
+       if (bw == vsi->bw_info.bw_ets_credits[tc_no]) {
+               PMD_DRV_LOG(INFO,
+                           "No change for TC max bandwidth. Nothing to do.");
+               return 0;
+       }
+
+       /**
+        * VF bandwidth limitation and TC bandwidth limitation cannot be
+        * enabled in parallel, disable VF bandwidth limitation if it's
+        * enabled.
+        * If bw is 0, means disable bandwidth limitation. Then no need to
+        * care about VF bandwidth limitation configuration.
+        */
+       if (bw && vsi->bw_info.bw_limit) {
+               ret = i40e_aq_config_vsi_bw_limit(hw, vsi->seid, 0, 0, NULL);
+               if (ret) {
+                       PMD_DRV_LOG(ERR,
+                                   "Failed to disable VF(%d)"
+                                   " bandwidth limitation, err(%d).",
+                                   vf_id, ret);
+                       return -EINVAL;
+               }
+
+               PMD_DRV_LOG(INFO,
+                           "VF max bandwidth is disabled according"
+                           " to TC max bandwidth setting.");
+       }
+
+       /**
+        * Get all the TCs' info to create a whole picture.
+        * Because the incremental change isn't permitted.
+        */
+       memset(&tc_bw, 0, sizeof(tc_bw));
+       tc_bw.tc_valid_bits = vsi->enabled_tc;
+       for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
+               if (vsi->enabled_tc & BIT_ULL(i)) {
+                       tc_bw.tc_bw_credits[i] =
+                               rte_cpu_to_le_16(
+                                       vsi->bw_info.bw_ets_credits[i]);
+               }
+       }
+       tc_bw.tc_bw_credits[tc_no] = rte_cpu_to_le_16((uint16_t)bw);
+
+       ret = i40e_aq_config_vsi_ets_sla_bw_limit(hw, vsi->seid, &tc_bw, NULL);
+       if (ret) {
+               PMD_DRV_LOG(ERR,
+                           "Failed to set VF %d TC %d max bandwidth, err(%d).",
+                           vf_id, tc_no, ret);
+               return -EINVAL;
+       }
+
+       /* Store the configuration. */
+       vsi->bw_info.bw_ets_credits[tc_no] = (uint16_t)bw;
+
+       return 0;
+}