*/
struct rte_pmd_i40e_mb_event_param {
uint16_t vfid; /**< Virtual Function number */
- uint16_t msg_type; /**< VF to PF message type, see i40e_virtchnl_ops */
+ uint16_t msg_type; /**< VF to PF message type, see virtchnl_ops */
uint16_t retval; /**< return value */
void *msg; /**< pointer to message */
uint16_t msglen; /**< length of the message */
};
+/**
+ * Option of package processing.
+ */
+enum rte_pmd_i40e_package_op {
+ RTE_PMD_I40E_PKG_OP_UNDEFINED = 0,
+ RTE_PMD_I40E_PKG_OP_WR_ADD, /**< load package and add to info list */
+ RTE_PMD_I40E_PKG_OP_MAX = 32
+};
+
+/**
+ * Types of package information.
+ */
+enum rte_pmd_i40e_package_info {
+ RTE_PMD_I40E_PKG_INFO_UNDEFINED = 0,
+ RTE_PMD_I40E_PKG_INFO_GLOBAL_HEADER,
+ RTE_PMD_I40E_PKG_INFO_GLOBAL_NOTES_SIZE,
+ RTE_PMD_I40E_PKG_INFO_GLOBAL_NOTES,
+ RTE_PMD_I40E_PKG_INFO_GLOBAL_MAX = 1024,
+ RTE_PMD_I40E_PKG_INFO_HEADER,
+ RTE_PMD_I40E_PKG_INFO_DEVID_NUM,
+ RTE_PMD_I40E_PKG_INFO_DEVID_LIST,
+ RTE_PMD_I40E_PKG_INFO_MAX = 0xFFFFFFFF
+};
+
+#define RTE_PMD_I40E_DDP_NAME_SIZE 32
+
+/**
+ * Version for dynamic device personalization.
+ * Version in "major.minor.update.draft" format.
+ */
+struct rte_pmd_i40e_ddp_version {
+ uint8_t major;
+ uint8_t minor;
+ uint8_t update;
+ uint8_t draft;
+};
+
+/**
+ * Device ID for dynamic device personalization.
+ */
+struct rte_pmd_i40e_ddp_device_id {
+ uint32_t vendor_dev_id;
+ uint32_t sub_vendor_dev_id;
+};
+
+/**
+ * Profile information in profile info list.
+ */
+struct rte_pmd_i40e_profile_info {
+ uint32_t track_id;
+ struct rte_pmd_i40e_ddp_version version;
+ uint8_t owner;
+ uint8_t reserved[7];
+ uint8_t name[RTE_PMD_I40E_DDP_NAME_SIZE];
+};
+
+#define RTE_PMD_I40E_DDP_OWNER_UNKNOWN 0xFF
+
+/**
+ * Profile information list returned from HW.
+ */
+struct rte_pmd_i40e_profile_list {
+ uint32_t p_count;
+ struct rte_pmd_i40e_profile_info p_info[1];
+};
+
+/**
+ * ptype mapping table only accept RTE_PTYPE_XXX or "user defined" ptype.
+ * A ptype with MSB set will be regarded as a user defined ptype.
+ * Below macro help to create a user defined ptype.
+ */
+#define RTE_PMD_I40E_PTYPE_USER_DEFINE_MASK 0x80000000
+
+struct rte_pmd_i40e_ptype_mapping {
+ uint16_t hw_ptype; /**< hardware defined packet type*/
+ uint32_t sw_ptype; /**< software defined packet type */
+};
+
/**
* Notify VF when PF link status changes.
*
*
* @param port
* The port identifier of the Ethernet device.
- * @param vf
+ * @param vf_id
* VF on which to set MAC anti spoofing.
* @param on
* 1 - Enable VFs MAC anti spoofing.
*
* @param port
* The port identifier of the Ethernet device.
- * @param vf
+ * @param vf_id
* VF on which to set VLAN anti spoofing.
* @param on
* 1 - Enable VFs VLAN anti spoofing.
*
* @param port
* The port identifier of the Ethernet device.
- * @param vf
+ * @param vf_id
* VF on which to set.
* @param on
* 1 - Enable.
*
* @param port
* The port identifier of the Ethernet device.
- * @param vf
+ * @param vf_id
* VF on which to set.
* @param on
* 1 - Enable.
int rte_pmd_i40e_set_vf_mac_addr(uint8_t port, uint16_t vf_id,
struct ether_addr *mac_addr);
+/**
+ * Enable/Disable vf vlan strip for all queues in a pool
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * ID specifying VF.
+ * @param on
+ * 1 - Enable VF's vlan strip on RX queues.
+ * 0 - Disable VF's vlan strip on RX queues.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int
+rte_pmd_i40e_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Enable/Disable vf vlan insert
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param vlan_id
+ * 0 - Disable VF's vlan insert.
+ * n - Enable; n is inserted as the vlan id.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_vlan_insert(uint8_t port, uint16_t vf_id,
+ uint16_t vlan_id);
+
+/**
+ * Enable/Disable vf broadcast mode
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param on
+ * 0 - Disable broadcast.
+ * 1 - Enable broadcast.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id,
+ uint8_t on);
+
+/**
+ * Enable/Disable vf vlan tag
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param on
+ * 0 - Disable VF's vlan tag.
+ * n - Enable VF's vlan tag.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_vlan_tag(uint8_t port, uint16_t vf_id, uint8_t on);
+
+/**
+ * Enable/Disable VF VLAN filter
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vlan_id
+ * ID specifying VLAN
+ * @param vf_mask
+ * Mask to filter VF's
+ * @param on
+ * 0 - Disable VF's VLAN filter.
+ * 1 - Enable VF's VLAN filter.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
+ uint64_t vf_mask, uint8_t on);
+
+/**
+ * Get VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters for the following set of statistics:
+ * - *ipackets* with the total of successfully received packets.
+ * - *opackets* with the total of successfully transmitted packets.
+ * - *ibytes* with the total of successfully received bytes.
+ * - *obytes* with the total of successfully transmitted bytes.
+ * - *ierrors* with the total of erroneous received packets.
+ * - *oerrors* with the total of failed transmitted packets.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_i40e_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats);
+
+/**
+ * Clear VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_reset_vf_stats(uint8_t port,
+ uint16_t vf_id);
+
+/**
+ * Set VF's max bandwidth.
+ *
+ * Per VF bandwidth limitation and per TC bandwidth limitation cannot
+ * be enabled in parallel. If per TC bandwidth is enabled, this function
+ * will disable it.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param bw
+ * Bandwidth for this VF.
+ * The value should be an absolute bandwidth in Mbps.
+ * The bandwidth is a L2 bandwidth counting the bytes of ethernet packets.
+ * Not count the bytes added by physical layer.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_i40e_set_vf_max_bw(uint8_t port,
+ uint16_t vf_id,
+ uint32_t bw);
+
+/**
+ * Set all the TCs' bandwidth weight on a specific VF.
+ *
+ * The bw_weight means the percentage occupied by the TC.
+ * It can be taken as the relative min bandwidth setting.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param tc_num
+ * Number of TCs.
+ * @param bw_weight
+ * An array of relative bandwidth weight for all the TCs.
+ * The summary of the bw_weight should be 100.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_i40e_set_vf_tc_bw_alloc(uint8_t port,
+ uint16_t vf_id,
+ uint8_t tc_num,
+ uint8_t *bw_weight);
+
+/**
+ * Set a specific TC's max bandwidth on a specific VF.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param tc_no
+ * Number specifying TC.
+ * @param bw
+ * Max bandwidth for this TC.
+ * The value should be an absolute bandwidth in Mbps.
+ * The bandwidth is a L2 bandwidth counting the bytes of ethernet packets.
+ * Not count the bytes added by physical layer.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_i40e_set_vf_tc_max_bw(uint8_t port,
+ uint16_t vf_id,
+ uint8_t tc_no,
+ uint32_t bw);
+
+/**
+ * Set some TCs to strict priority mode on a physical port.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param tc_map
+ * A bit map for the TCs.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_i40e_set_tc_strict_prio(uint8_t port, uint8_t tc_map);
+
+/**
+ * Load/Unload a ddp package
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param buff
+ * buffer of package.
+ * @param size
+ * size of buffer.
+ * @param op
+ * Operation of package processing
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (1) if profile exists.
+ */
+int rte_pmd_i40e_process_ddp_package(uint8_t port, uint8_t *buff,
+ uint32_t size,
+ enum rte_pmd_i40e_package_op op);
+
+/**
+ * rte_pmd_i40e_get_ddp_info - Get profile's info
+ * @param pkg
+ * buffer of package.
+ * @param pkg_size
+ * package buffer size
+ * @param info
+ * buffer for response
+ * @param size
+ * response buffer size
+ * @param type
+ * type of information requested
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if information type not supported by the profile.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_get_ddp_info(uint8_t *pkg, uint32_t pkg_size,
+ uint8_t *info, uint32_t size,
+ enum rte_pmd_i40e_package_info type);
+
+/**
+ * rte_pmd_i40e_get_ddp_list - Get loaded profile list
+ * @param port
+ * port id
+ * @param buff
+ * buffer for response
+ * @param size
+ * buffer size
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_get_ddp_list(uint8_t port, uint8_t *buff, uint32_t size);
+
+/**
+ * Update hardware defined ptype to software defined packet type
+ * mapping table.
+ *
+ * @param port
+ * pointer to port identifier of the device.
+ * @param mapping_items
+ * the base address of the mapping items array.
+ * @param count
+ * number of mapping items.
+ * @param exclusive
+ * the flag indicate different ptype mapping update method.
+ * -(0) only overwrite referred PTYPE mapping,
+ * keep other PTYPEs mapping unchanged.
+ * -(!0) overwrite referred PTYPE mapping,
+ * set other PTYPEs maps to PTYPE_UNKNOWN.
+ */
+int rte_pmd_i40e_ptype_mapping_update(
+ uint8_t port,
+ struct rte_pmd_i40e_ptype_mapping *mapping_items,
+ uint16_t count,
+ uint8_t exclusive);
+
+/**
+ * Reset hardware defined ptype to software defined ptype
+ * mapping table to default.
+ *
+ * @param port
+ * pointer to port identifier of the device
+ */
+int rte_pmd_i40e_ptype_mapping_reset(uint8_t port);
+
+/**
+ * Get hardware defined ptype to software defined ptype
+ * mapping items.
+ *
+ * @param port
+ * pointer to port identifier of the device.
+ * @param mapping_items
+ * the base address of the array to store returned items.
+ * @param size
+ * the size of the input array.
+ * @param count
+ * the place to store the number of returned items.
+ * @param valid_only
+ * -(0) return full mapping table.
+ * -(!0) only return mapping items which packet_type != RTE_PTYPE_UNKNOWN.
+ */
+int rte_pmd_i40e_ptype_mapping_get(
+ uint8_t port,
+ struct rte_pmd_i40e_ptype_mapping *mapping_items,
+ uint16_t size,
+ uint16_t *count,
+ uint8_t valid_only);
+
+/**
+ * Replace a specific or a group of software defined ptypes
+ * with a new one
+ *
+ * @param port
+ * pointer to port identifier of the device
+ * @param target
+ * the packet type to be replaced
+ * @param mask
+ * -(0) target represent a specific software defined ptype.
+ * -(!0) target is a mask to represent a group of software defined ptypes.
+ * @param pkt_type
+ * the new packet type to overwrite
+ */
+int rte_pmd_i40e_ptype_mapping_replace(uint8_t port,
+ uint32_t target,
+ uint8_t mask,
+ uint32_t pkt_type);
+
#endif /* _PMD_I40E_H_ */
git.droids-corp.org / dpdk.git / blobdiff