RTE_PMD_I40E_PKG_INFO_MAX = 0xFFFFFFFF
};
-#define RTE_PMD_I40E_DDP_NAME_SIZE 32
+/**
+ * Option types of queue region.
+ */
+enum rte_pmd_i40e_queue_region_op {
+ RTE_PMD_I40E_RSS_QUEUE_REGION_UNDEFINED,
+ /** add queue region set */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_SET,
+ /** add PF region pctype set */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_FLOWTYPE_SET,
+ /** add queue region user priority set */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_USER_PRIORITY_SET,
+ /**
+ * ALL configuration about queue region from up layer
+ * at first will only keep in DPDK software stored in driver,
+ * only after " FLUSH_ON ", it commit all configuration to HW.
+ * Because PMD had to set hardware configuration at a time, so
+ * it will record all up layer command at first.
+ */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_ON,
+ /**
+ * "FLUSH_OFF " is just clean all configuration about queue
+ * region just now, and restore all to DPDK i40e driver default
+ * config when start up.
+ */
+ RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_OFF,
+ RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET,
+ RTE_PMD_I40E_RSS_QUEUE_REGION_OP_MAX
+};
+
+#define RTE_PMD_I40E_DDP_NAME_SIZE 32
+#define RTE_PMD_I40E_PCTYPE_MAX 64
+#define RTE_PMD_I40E_REGION_MAX_NUM 8
+#define RTE_PMD_I40E_MAX_USER_PRIORITY 8
/**
* Version for dynamic device personalization.
uint32_t sw_ptype; /**< software defined packet type */
};
+/**
+ * Queue region related information.
+ */
+struct rte_pmd_i40e_queue_region_conf {
+ /** the region id for this configuration */
+ uint8_t region_id;
+ /** the pctype or hardware flowtype of packet,
+ * the specific index for each type has been defined
+ * in file i40e_type.h as enum i40e_filter_pctype.
+ */
+ uint8_t hw_flowtype;
+ /** the start queue index for this region */
+ uint8_t queue_start_index;
+ /** the total queue number of this queue region */
+ uint8_t queue_num;
+ /** the packet's user priority for this region */
+ uint8_t user_priority;
+};
+
+/* queue region info */
+struct rte_pmd_i40e_queue_region_info {
+ /** the region id for this configuration */
+ uint8_t region_id;
+ /** the start queue index for this region */
+ uint8_t queue_start_index;
+ /** the total queue number of this queue region */
+ uint8_t queue_num;
+ /** the total number of user priority for this region */
+ uint8_t user_priority_num;
+ /** the packet's user priority for this region */
+ uint8_t user_priority[RTE_PMD_I40E_MAX_USER_PRIORITY];
+ /** the total number of flowtype for this region */
+ uint8_t flowtype_num;
+ /**
+ * the pctype or hardware flowtype of packet,
+ * the specific index for each type has been defined
+ * in file i40e_type.h as enum i40e_filter_pctype.
+ */
+ uint8_t hw_flowtype[RTE_PMD_I40E_PCTYPE_MAX];
+};
+
+struct rte_pmd_i40e_queue_regions {
+ /** the total number of queue region for this port */
+ uint16_t queue_region_number;
+ struct rte_pmd_i40e_queue_region_info
+ region[RTE_PMD_I40E_REGION_MAX_NUM];
+};
+
+/**
+ * Behavior will be taken if raw packet template is matched.
+ */
+enum rte_pmd_i40e_pkt_template_behavior {
+ RTE_PMD_I40E_PKT_TEMPLATE_ACCEPT,
+ RTE_PMD_I40E_PKT_TEMPLATE_REJECT,
+ RTE_PMD_I40E_PKT_TEMPLATE_PASSTHRU,
+};
+
+/**
+ * Flow director report status
+ * It defines what will be reported if raw packet template is matched.
+ */
+enum rte_pmd_i40e_pkt_template_status {
+ /** report nothing */
+ RTE_PMD_I40E_PKT_TEMPLATE_NO_REPORT_STATUS,
+ /** only report FD ID */
+ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID,
+ /** report FD ID and 4 flex bytes */
+ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID_FLEX_4,
+ /** report 8 flex bytes */
+ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_FLEX_8,
+};
+
+/**
+ * A structure used to define an action when raw packet template is matched.
+ */
+struct rte_pmd_i40e_pkt_template_action {
+ /** queue assigned to if raw packet template match */
+ uint16_t rx_queue;
+ /** behavior will be taken */
+ enum rte_pmd_i40e_pkt_template_behavior behavior;
+ /** status report option */
+ enum rte_pmd_i40e_pkt_template_status report_status;
+ /**
+ * If report_status is RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID_FLEX_4 or
+ * RTE_PMD_I40E_PKT_TEMPLATE_REPORT_FLEX_8, flex_off specifies
+ * where the reported flex bytes start from in flexible payload.
+ */
+ uint8_t flex_off;
+};
+
+/**
+ * A structure used to define the input for raw packet template.
+ */
+struct rte_pmd_i40e_pkt_template_input {
+ /** the pctype used for raw packet template */
+ uint16_t pctype;
+ /** the buffer conatining raw packet template */
+ void *packet;
+ /** the length of buffer with raw packet template */
+ uint32_t length;
+};
+
+/**
+ * A structure used to define the configuration parameters
+ * for raw packet template.
+ */
+struct rte_pmd_i40e_pkt_template_conf {
+ /** the input for raw packet template. */
+ struct rte_pmd_i40e_pkt_template_input input;
+ /** the action to be taken when raw packet template is matched */
+ struct rte_pmd_i40e_pkt_template_action action;
+ /** ID, an unique software index for the raw packet template filter */
+ uint32_t soft_id;
+};
+
+/**
+ * Add or remove raw packet template filter to Flow Director.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param conf
+ * Specifies configuration parameters of raw packet template filter.
+ * @param add
+ * Speicifes an action to be taken - add or remove raw packet template filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *conf* invalid.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_i40e_flow_add_del_packet_template(
+ uint16_t port,
+ const struct rte_pmd_i40e_pkt_template_conf *conf,
+ uint8_t add);
+
/**
* Notify VF when PF link status changes.
*
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* invalid.
*/
-int rte_pmd_i40e_ping_vfs(uint8_t port, uint16_t vf);
+int rte_pmd_i40e_ping_vfs(uint16_t port, uint16_t vf);
/**
* Enable/Disable VF MAC anti spoofing.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_mac_anti_spoof(uint8_t port,
+int rte_pmd_i40e_set_vf_mac_anti_spoof(uint16_t port,
uint16_t vf_id,
uint8_t on);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_vlan_anti_spoof(uint8_t port,
+int rte_pmd_i40e_set_vf_vlan_anti_spoof(uint16_t port,
uint16_t vf_id,
uint8_t on);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_tx_loopback(uint8_t port,
+int rte_pmd_i40e_set_tx_loopback(uint16_t port,
uint8_t on);
/**
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_unicast_promisc(uint8_t port,
+int rte_pmd_i40e_set_vf_unicast_promisc(uint16_t port,
uint16_t vf_id,
uint8_t on);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_multicast_promisc(uint8_t port,
+int rte_pmd_i40e_set_vf_multicast_promisc(uint16_t port,
uint16_t vf_id,
uint8_t on);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
*/
-int rte_pmd_i40e_set_vf_mac_addr(uint8_t port, uint16_t vf_id,
+int rte_pmd_i40e_set_vf_mac_addr(uint16_t port, uint16_t vf_id,
struct ether_addr *mac_addr);
/**
* - (-EINVAL) if bad parameter.
*/
int
-rte_pmd_i40e_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_i40e_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan insert
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_vlan_insert(uint8_t port, uint16_t vf_id,
+int rte_pmd_i40e_set_vf_vlan_insert(uint16_t port, uint16_t vf_id,
uint16_t vlan_id);
/**
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id,
+int rte_pmd_i40e_set_vf_broadcast(uint16_t port, uint16_t vf_id,
uint8_t on);
/**
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_set_vf_vlan_tag(uint8_t port, uint16_t vf_id, uint8_t on);
+int rte_pmd_i40e_set_vf_vlan_tag(uint16_t port, uint16_t vf_id, uint8_t on);
/**
* Enable/Disable VF VLAN filter
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
+int rte_pmd_i40e_set_vf_vlan_filter(uint16_t port, uint16_t vlan_id,
uint64_t vf_mask, uint8_t on);
/**
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_get_vf_stats(uint8_t port,
+int rte_pmd_i40e_get_vf_stats(uint16_t port,
uint16_t vf_id,
struct rte_eth_stats *stats);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_reset_vf_stats(uint8_t port,
+int rte_pmd_i40e_reset_vf_stats(uint16_t port,
uint16_t vf_id);
/**
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_vf_max_bw(uint8_t port,
+int rte_pmd_i40e_set_vf_max_bw(uint16_t port,
uint16_t vf_id,
uint32_t bw);
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_vf_tc_bw_alloc(uint8_t port,
+int rte_pmd_i40e_set_vf_tc_bw_alloc(uint16_t port,
uint16_t vf_id,
uint8_t tc_num,
uint8_t *bw_weight);
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_vf_tc_max_bw(uint8_t port,
+int rte_pmd_i40e_set_vf_tc_max_bw(uint16_t port,
uint16_t vf_id,
uint8_t tc_no,
uint32_t bw);
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_i40e_set_tc_strict_prio(uint8_t port, uint8_t tc_map);
+int rte_pmd_i40e_set_tc_strict_prio(uint16_t port, uint8_t tc_map);
/**
* Load/Unload a ddp package
* - (-EACCES) if profile does not exist.
* - (-ENOTSUP) if operation not supported.
*/
-int rte_pmd_i40e_process_ddp_package(uint8_t port, uint8_t *buff,
+int rte_pmd_i40e_process_ddp_package(uint16_t port, uint8_t *buff,
uint32_t size,
enum rte_pmd_i40e_package_op op);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_i40e_get_ddp_list(uint8_t port, uint8_t *buff, uint32_t size);
+int rte_pmd_i40e_get_ddp_list(uint16_t port, uint8_t *buff, uint32_t size);
/**
* Update hardware defined ptype to software defined packet type
* set other PTYPEs maps to PTYPE_UNKNOWN.
*/
int rte_pmd_i40e_ptype_mapping_update(
- uint8_t port,
+ uint16_t port,
struct rte_pmd_i40e_ptype_mapping *mapping_items,
uint16_t count,
uint8_t exclusive);
* @param port
* pointer to port identifier of the device
*/
-int rte_pmd_i40e_ptype_mapping_reset(uint8_t port);
+int rte_pmd_i40e_ptype_mapping_reset(uint16_t port);
/**
* Get hardware defined ptype to software defined ptype
* -(!0) only return mapping items which packet_type != RTE_PTYPE_UNKNOWN.
*/
int rte_pmd_i40e_ptype_mapping_get(
- uint8_t port,
+ uint16_t port,
struct rte_pmd_i40e_ptype_mapping *mapping_items,
uint16_t size,
uint16_t *count,
* @param pkt_type
* the new packet type to overwrite
*/
-int rte_pmd_i40e_ptype_mapping_replace(uint8_t port,
+int rte_pmd_i40e_ptype_mapping_replace(uint16_t port,
uint32_t target,
uint8_t mask,
uint32_t pkt_type);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
*/
-int rte_pmd_i40e_add_vf_mac_addr(uint8_t port, uint16_t vf_id,
+int rte_pmd_i40e_add_vf_mac_addr(uint16_t port, uint16_t vf_id,
struct ether_addr *mac_addr);
#define RTE_PMD_I40E_PCTYPE_MAX 64
* set other PCTYPEs maps to PCTYPE_INVALID.
*/
int rte_pmd_i40e_flow_type_mapping_update(
- uint8_t port,
+ uint16_t port,
struct rte_pmd_i40e_flow_type_mapping *mapping_items,
uint16_t count,
uint8_t exclusive);
* RTE_PMD_I40E_FLOW_TYPE_MAX items
*/
int rte_pmd_i40e_flow_type_mapping_get(
- uint8_t port,
+ uint16_t port,
struct rte_pmd_i40e_flow_type_mapping *mapping_items);
/**
* @param port
* pointer to port identifier of the device
*/
-int rte_pmd_i40e_flow_type_mapping_reset(uint8_t port);
+int rte_pmd_i40e_flow_type_mapping_reset(uint16_t port);
+
+/**
+ * On the PF, find VF index based on VF MAC address
+ *
+ * @param port
+ * pointer to port identifier of the device
+ * @param vf_mac
+ * the mac address of the vf to determine index of
+ * @return
+ * The index of vfid If successful.
+ * -EINVAL: vf mac address does not exist for this port
+ * -ENOTSUP: i40e not supported for this port.
+ */
+int rte_pmd_i40e_query_vfid_by_mac(uint16_t port,
+ const struct ether_addr *vf_mac);
+
+/**
+ * Do RSS queue region configuration for that port as
+ * the command option type
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param op_type
+ * Queue region operation type
+ * @param arg
+ * Queue region operation type specific data
+ */
+int rte_pmd_i40e_rss_queue_region_conf(uint16_t port_id,
+ enum rte_pmd_i40e_queue_region_op op_type, void *arg);
#endif /* _PMD_I40E_H_ */
git.droids-corp.org / dpdk.git / blobdiff