*
* @param port
* The port identifier of the Ethernet device.
- * @param vf
+ * @param vf_id
* VF on which to set MAC anti spoofing.
* @param on
* 1 - Enable VFs MAC anti spoofing.
*
* @param port
* The port identifier of the Ethernet device.
- * @param vf
+ * @param vf_id
* VF on which to set VLAN anti spoofing.
* @param on
* 1 - Enable VFs VLAN anti spoofing.
int rte_pmd_i40e_set_tx_loopback(uint8_t port,
uint8_t on);
+/**
+ * Enable/Disable VF unicast promiscuous mode.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to set.
+ * @param on
+ * 1 - Enable.
+ * 0 - Disable.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_unicast_promisc(uint8_t port,
+ uint16_t vf_id,
+ uint8_t on);
+
+/**
+ * Enable/Disable VF multicast promiscuous mode.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to set.
+ * @param on
+ * 1 - Enable.
+ * 0 - Disable.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_multicast_promisc(uint8_t port,
+ uint16_t vf_id,
+ uint8_t on);
+
+/**
+ * Set the VF MAC address.
+ *
+ * PF should set MAC address before VF initialized, if PF sets the MAC
+ * address after VF initialized, new MAC address won't be effective until
+ * VF reinitialize.
+ *
+ * This will remove all existing MAC filters.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF id.
+ * @param mac_addr
+ * VF MAC address.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *vf* or *mac_addr* is invalid.
+ */
+int rte_pmd_i40e_set_vf_mac_addr(uint8_t port, uint16_t vf_id,
+ struct ether_addr *mac_addr);
+
+/**
+ * Enable/Disable vf vlan strip for all queues in a pool
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * ID specifying VF.
+ * @param on
+ * 1 - Enable VF's vlan strip on RX queues.
+ * 0 - Disable VF's vlan strip on RX queues.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int
+rte_pmd_i40e_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Enable/Disable vf vlan insert
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param vlan_id
+ * 0 - Disable VF's vlan insert.
+ * n - Enable; n is inserted as the vlan id.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_vlan_insert(uint8_t port, uint16_t vf_id,
+ uint16_t vlan_id);
+
+/**
+ * Enable/Disable vf broadcast mode
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param on
+ * 0 - Disable broadcast.
+ * 1 - Enable broadcast.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id,
+ uint8_t on);
+
+/**
+ * Enable/Disable vf vlan tag
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * ID specifying VF.
+ * @param on
+ * 0 - Disable VF's vlan tag.
+ * n - Enable VF's vlan tag.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_vlan_tag(uint8_t port, uint16_t vf_id, uint8_t on);
+
+/**
+ * Enable/Disable VF VLAN filter
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vlan_id
+ * ID specifying VLAN
+ * @param vf_mask
+ * Mask to filter VF's
+ * @param on
+ * 0 - Disable VF's VLAN filter.
+ * 1 - Enable VF's VLAN filter.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
+ uint64_t vf_mask, uint8_t on);
+
+/**
+ * Get VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters for the following set of statistics:
+ * - *ipackets* with the total of successfully received packets.
+ * - *opackets* with the total of successfully transmitted packets.
+ * - *ibytes* with the total of successfully received bytes.
+ * - *obytes* with the total of successfully transmitted bytes.
+ * - *ierrors* with the total of erroneous received packets.
+ * - *oerrors* with the total of failed transmitted packets.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_i40e_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats);
+
+/**
+ * Clear VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_reset_vf_stats(uint8_t port,
+ uint16_t vf_id);
+
#endif /* _PMD_I40E_H_ */