* descriptor format. It is shared between Firmware and Software.
*/
-
#define ICE_MAX_VSI 768
#define ICE_AQC_TOPO_MAX_LEVEL_NUM 0x9
#define ICE_AQ_SET_MAC_FRAME_SIZE_MAX 9728
-
struct ice_aqc_generic {
__le32 param0;
__le32 param1;
__le32 addr_low;
};
-
/* Get version (direct 0x0001) */
struct ice_aqc_get_ver {
__le32 rom_ver;
u8 api_patch;
};
-
/* Send driver version (indirect 0x0002) */
struct ice_aqc_driver_ver {
u8 major_ver;
__le32 addr_low;
};
-
/* Queue Shutdown (direct 0x0003) */
struct ice_aqc_q_shutdown {
- __le32 driver_unloading;
+ u8 driver_unloading;
#define ICE_AQC_DRIVER_UNLOADING BIT(0)
- u8 reserved[12];
+ u8 reserved[15];
};
-
-
-
/* Request resource ownership (direct 0x0008)
* Release resource ownership (direct 0x0009)
*/
u8 reserved[2];
};
-
/* Get function capabilities (indirect 0x000A)
* Get device capabilities (indirect 0x000B)
*/
__le32 addr_low;
};
-
/* Device/Function buffer entry, repeated per reported capability */
struct ice_aqc_list_caps_elem {
__le16 cap;
#define ICE_AQC_CAPS_VALID_FUNCTIONS 0x0005
+#define ICE_AQC_MAX_VALID_FUNCTIONS 0x8
#define ICE_AQC_CAPS_VSI 0x0017
#define ICE_AQC_CAPS_DCB 0x0018
#define ICE_AQC_CAPS_RSS 0x0040
__le64 rsvd2;
};
-
/* Manage MAC address, read command - indirect (0x0107)
* This struct is also used for the response
*/
#define ICE_AQC_MAN_MAC_SAN_ADDR_VALID BIT(5)
#define ICE_AQC_MAN_MAC_PORT_ADDR_VALID BIT(6)
#define ICE_AQC_MAN_MAC_WOL_ADDR_VALID BIT(7)
+#define ICE_AQC_MAN_MAC_MC_MAG_EN BIT(8)
+#define ICE_AQC_MAN_MAC_WOL_PRESERVE_ON_PFR BIT(9)
#define ICE_AQC_MAN_MAC_READ_S 4
#define ICE_AQC_MAN_MAC_READ_M (0xF << ICE_AQC_MAN_MAC_READ_S)
- u8 lport_num;
- u8 lport_num_valid;
-#define ICE_AQC_MAN_MAC_PORT_NUM_IS_VALID BIT(0)
+ u8 rsvd[2];
u8 num_addr; /* Used in response */
- u8 reserved[3];
+ u8 rsvd1[3];
__le32 addr_high;
__le32 addr_low;
};
-
/* Response buffer format for manage MAC read command */
struct ice_aqc_manage_mac_read_resp {
u8 lport_num;
u8 mac_addr[ETH_ALEN];
};
-
/* Manage MAC address, write command - direct (0x0108) */
struct ice_aqc_manage_mac_write {
- u8 port_num;
+ u8 rsvd;
u8 flags;
#define ICE_AQC_MAN_MAC_WR_MC_MAG_EN BIT(0)
#define ICE_AQC_MAN_MAC_WR_WOL_LAA_PFR_KEEP BIT(1)
__le32 addr_low;
};
-
/* Clear PXE Command and response (direct 0x0110) */
struct ice_aqc_clear_pxe {
u8 rx_cnt;
u8 reserved[15];
};
-
/* Configure No-Drop Policy Command (direct 0x0112) */
struct ice_aqc_config_no_drop_policy {
u8 opts;
__le32 addr_low;
};
-
/* Each entry in the response buffer is of the following type: */
struct ice_aqc_get_sw_cfg_resp_elem {
/* VSI/Port Number */
#define ICE_AQC_GET_SW_CONF_RESP_IS_VF BIT(15)
};
-
/* The response buffer is as follows. Note that the length of the
* elements array varies with the length of the command response.
*/
struct ice_aqc_get_sw_cfg_resp_elem elements[1];
};
-
-
/* These resource type defines are used for all switch resource
* commands where a resource type is required, such as:
* Get Resource Allocation command (indirect 0x0204)
struct ice_aqc_get_res_resp_elem elem[1];
};
-
/* Allocate Resources command (indirect 0x0208)
* Free Resources command (indirect 0x0209)
*/
__le32 addr_low;
};
-
/* Resource descriptor */
struct ice_aqc_res_elem {
union {
} e;
};
-
/* Buffer for Allocate/Free Resources commands */
struct ice_aqc_alloc_free_res_elem {
__le16 res_type; /* Types defined above cmd 0x0204 */
struct ice_aqc_res_elem elem[1];
};
-
/* Get Allocated Resource Descriptors Command (indirect 0x020A) */
struct ice_aqc_get_allocd_res_desc {
union {
struct ice_aqc_res_elem elem[1];
};
-
/* Add VSI (indirect 0x0210)
* Update VSI (indirect 0x0211)
* Get VSI (indirect 0x0212)
__le32 addr_low;
};
-
/* Response descriptor for:
* Add VSI (indirect 0x0210)
* Update VSI (indirect 0x0211)
__le32 addr_low;
};
-
struct ice_aqc_get_vsi_resp {
__le16 vsi_num;
u8 vf_id;
__le32 addr_low;
};
-
struct ice_aqc_vsi_props {
__le16 valid_sections;
#define ICE_AQ_VSI_PROP_SW_VALID BIT(0)
#define ICE_AQ_VSI_PROP_RXQ_MAP_VALID BIT(6)
#define ICE_AQ_VSI_PROP_Q_OPT_VALID BIT(7)
#define ICE_AQ_VSI_PROP_OUTER_UP_VALID BIT(8)
+#define ICE_AQ_VSI_PROP_ACL_VALID BIT(10)
#define ICE_AQ_VSI_PROP_FLOW_DIR_VALID BIT(11)
#define ICE_AQ_VSI_PROP_PASID_VALID BIT(12)
/* switch section */
#define ICE_AQ_VSI_VLAN_MODE_TAGGED 0x2
#define ICE_AQ_VSI_VLAN_MODE_ALL 0x3
#define ICE_AQ_VSI_PVLAN_INSERT_PVID BIT(2)
-#define ICE_AQ_VSI_VLAN_EMOD_S 3
-#define ICE_AQ_VSI_VLAN_EMOD_M (0x3 << ICE_AQ_VSI_VLAN_EMOD_S)
+#define ICE_AQ_VSI_VLAN_EMOD_S 3
+#define ICE_AQ_VSI_VLAN_EMOD_M (0x3 << ICE_AQ_VSI_VLAN_EMOD_S)
#define ICE_AQ_VSI_VLAN_EMOD_STR_BOTH (0x0 << ICE_AQ_VSI_VLAN_EMOD_S)
#define ICE_AQ_VSI_VLAN_EMOD_STR_UP (0x1 << ICE_AQ_VSI_VLAN_EMOD_S)
#define ICE_AQ_VSI_VLAN_EMOD_STR (0x2 << ICE_AQ_VSI_VLAN_EMOD_S)
u8 q_opt_reserved[3];
/* outer up section */
__le32 outer_up_table; /* same structure and defines as ingress tbl */
- /* section 10 */
- __le16 sect_10_reserved;
+ /* acl section */
+ __le16 acl_def_act;
+#define ICE_AQ_VSI_ACL_DEF_RX_PROF_S 0
+#define ICE_AQ_VSI_ACL_DEF_RX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_PROF_S)
+#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_S 4
+#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_TABLE_S)
+#define ICE_AQ_VSI_ACL_DEF_TX_PROF_S 8
+#define ICE_AQ_VSI_ACL_DEF_TX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_PROF_S)
+#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_S 12
+#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_TABLE_S)
/* flow director section */
__le16 fd_options;
#define ICE_AQ_VSI_FD_ENABLE BIT(0)
u8 reserved[24];
};
-
/* Add/update mirror rule - direct (0x0260) */
#define ICE_AQC_RULE_ID_VALID_S 7
#define ICE_AQC_RULE_ID_VALID_M (0x1 << ICE_AQC_RULE_ID_VALID_S)
__le32 reserved;
};
-
#define ICE_MAX_NUM_RECIPES 64
/* Add/Get Recipe (indirect 0x0290/0x0292)*/
#define ICE_AQ_RECIPE_ID_S 0
#define ICE_AQ_RECIPE_ID_M (0x3F << ICE_AQ_RECIPE_ID_S)
#define ICE_AQ_RECIPE_ID_IS_ROOT BIT(7)
-#define ICE_AQ_SW_ID_LKUP_IDX 0
+#define ICE_AQ_SW_ID_LKUP_IDX 0
u8 lkup_indx[5];
#define ICE_AQ_RECIPE_LKUP_DATA_S 0
#define ICE_AQ_RECIPE_LKUP_DATA_M (0x3F << ICE_AQ_RECIPE_LKUP_DATA_S)
__le32 addr_low;
};
-
#pragma pack(1)
/* Add/Update/Get/Remove lookup Rx/Tx command/response entry
* This structures describes the lookup rules and associated actions. "index"
#define ICE_SINGLE_ACT_OTHER_ACTS 0x3
#define ICE_SINGLE_OTHER_ACT_IDENTIFIER_S 17
#define ICE_SINGLE_OTHER_ACT_IDENTIFIER_M \
- (0x3 << \ ICE_SINGLE_OTHER_ACT_IDENTIFIER_S)
+ (0x3 << ICE_SINGLE_OTHER_ACT_IDENTIFIER_S)
/* Bit 17:18 - Defines other actions */
/* Other action = 0 - Mirror VSI */
};
#pragma pack()
-
/* Add/Update/Remove large action command/response entry
* "index" is returned as part of a response to a successful Add command, and
* can be used to identify the action for Update/Get/Remove commands.
#define ICE_LG_ACT_STAT_COUNT_M (0x7F << ICE_LG_ACT_STAT_COUNT_S)
};
-
/* Add/Update/Remove VSI list command/response entry
* "index" is returned as part of a response to a successful Add command, and
* can be used to identify the VSI list for Update/Get/Remove commands.
__le16 vsi[1]; /* Array of number_vsi VSI numbers */
};
-
#pragma pack(1)
/* Query VSI list command/response entry */
struct ice_sw_rule_vsi_list_query {
};
#pragma pack()
-
#pragma pack(1)
/* Add switch rule response:
* Content of return buffer is same as the input buffer. The status field and
#pragma pack()
-
/* PFC Ignore (direct 0x0301)
* The command and response use the same descriptor structure
*/
u8 rsvd[14];
};
-
/* Get Default Topology (indirect 0x0400) */
struct ice_aqc_get_topo {
u8 port_num;
__le32 addr_low;
};
-
/* Update TSE (indirect 0x0403)
* Get TSE (indirect 0x0404)
* Add TSE (indirect 0x0401)
__le32 addr_low;
};
-
/* This is the buffer for:
* Suspend Nodes (indirect 0x0409)
* Resume Nodes (indirect 0x040A)
__le32 teid[1];
};
-
struct ice_aqc_txsched_move_grp_info_hdr {
__le32 src_parent_teid;
__le32 dest_parent_teid;
__le16 reserved;
};
-
struct ice_aqc_move_elem {
struct ice_aqc_txsched_move_grp_info_hdr hdr;
__le32 teid[1];
};
-
struct ice_aqc_elem_info_bw {
__le16 bw_profile_idx;
__le16 bw_alloc;
};
-
struct ice_aqc_txsched_elem {
u8 elem_type; /* Special field, reserved for some aq calls */
#define ICE_AQC_ELEM_TYPE_UNDEFINED 0x0
__le16 reserved2;
};
-
struct ice_aqc_txsched_elem_data {
__le32 parent_teid;
__le32 node_teid;
struct ice_aqc_txsched_elem data;
};
-
struct ice_aqc_txsched_topo_grp_info_hdr {
__le32 parent_teid;
__le16 num_elems;
__le16 reserved2;
};
-
struct ice_aqc_add_elem {
struct ice_aqc_txsched_topo_grp_info_hdr hdr;
struct ice_aqc_txsched_elem_data generic[1];
};
-
struct ice_aqc_conf_elem {
struct ice_aqc_txsched_elem_data generic[1];
};
-
struct ice_aqc_get_elem {
struct ice_aqc_txsched_elem_data generic[1];
};
-
struct ice_aqc_get_topo_elem {
struct ice_aqc_txsched_topo_grp_info_hdr hdr;
struct ice_aqc_txsched_elem_data
generic[ICE_AQC_TOPO_MAX_LEVEL_NUM];
};
-
struct ice_aqc_delete_elem {
struct ice_aqc_txsched_topo_grp_info_hdr hdr;
__le32 teid[1];
};
-
/* Query Port ETS (indirect 0x040E)
*
* This indirect command is used to query port TC node configuration.
__le32 tc_node_teid[8]; /* Used for response, reserved in command */
};
-
/* Rate limiting profile for
* Add RL profile (indirect 0x0410)
* Query RL profile (indirect 0x0411)
__le32 addr_low;
};
-
struct ice_aqc_rl_profile_elem {
u8 level;
u8 flags;
__le16 rl_encode;
};
-
struct ice_aqc_rl_profile_generic_elem {
struct ice_aqc_rl_profile_elem generic[1];
};
-
-
/* Configure L2 Node CGD (indirect 0x0414)
* This indirect command allows configuring a congestion domain for given L2
* node TEIDs in the scheduler topology.
__le32 addr_low;
};
-
struct ice_aqc_cfg_l2_node_cgd_elem {
__le32 node_teid;
u8 cgd;
u8 reserved[3];
};
-
struct ice_aqc_cfg_l2_node_cgd_data {
struct ice_aqc_cfg_l2_node_cgd_elem elem[1];
};
-
/* Query Scheduler Resource Allocation (indirect 0x0412)
* This indirect command retrieves the scheduler resources allocated by
* EMP Firmware to the given PF.
__le32 addr_low;
};
-
struct ice_aqc_generic_sched_props {
__le16 phys_levels;
__le16 logical_levels;
u8 rsvd1[22];
};
-
struct ice_aqc_layer_props {
u8 logical_layer;
u8 chunk_size;
u8 rsvd1[14];
};
-
struct ice_aqc_query_txsched_res_resp {
struct ice_aqc_generic_sched_props sched_props;
struct ice_aqc_layer_props layer_props[ICE_AQC_TOPO_MAX_LEVEL_NUM];
};
-
/* Query Node to Root Topology (indirect 0x0413)
* This command uses ice_aqc_get_elem as its data buffer.
*/
__le32 addr_low;
};
-
/* Get PHY capabilities (indirect 0x0600) */
struct ice_aqc_get_phy_caps {
u8 lport_num;
__le32 addr_low;
};
-
/* This is #define of PHY type (Extended):
* The first set of defines is for phy_type_low.
*/
#define ICE_AQC_PHY_EN_LESM BIT(6)
#define ICE_AQC_PHY_EN_AUTO_FEC BIT(7)
#define ICE_AQC_PHY_CAPS_MASK MAKEMASK(0xff, 0)
- u8 low_power_ctrl;
+ u8 low_power_ctrl_an;
#define ICE_AQC_PHY_EN_D3COLD_LOW_POWER_AUTONEG BIT(0)
+#define ICE_AQC_PHY_AN_EN_CLAUSE28 BIT(1)
+#define ICE_AQC_PHY_AN_EN_CLAUSE73 BIT(2)
+#define ICE_AQC_PHY_AN_EN_CLAUSE37 BIT(3)
__le16 eee_cap;
#define ICE_AQC_PHY_EEE_EN_100BASE_TX BIT(0)
#define ICE_AQC_PHY_EEE_EN_1000BASE_T BIT(1)
#define ICE_AQC_PHY_FEC_25G_RS_CLAUSE91_EN BIT(6)
#define ICE_AQC_PHY_FEC_25G_KR_CLAUSE74_EN BIT(7)
#define ICE_AQC_PHY_FEC_MASK MAKEMASK(0xdf, 0)
+ u8 module_compliance_enforcement;
+#define ICE_AQC_MOD_ENFORCE_STRICT_MODE BIT(0)
u8 extended_compliance_code;
#define ICE_MODULE_TYPE_TOTAL_BYTE 3
u8 module_type[ICE_MODULE_TYPE_TOTAL_BYTE];
#define ICE_AQC_MOD_TYPE_BYTE2_SFP_PLUS 0xA0
#define ICE_AQC_MOD_TYPE_BYTE2_QSFP_PLUS 0x86
u8 qualified_module_count;
+ u8 rsvd2[7]; /* Bytes 47:41 reserved */
#define ICE_AQC_QUAL_MOD_COUNT_MAX 16
struct {
u8 v_oui[3];
u8 rsvd3;
u8 v_part[16];
__le32 v_rev;
- __le64 rsvd8;
+ __le64 rsvd4;
} qual_modules[ICE_AQC_QUAL_MOD_COUNT_MAX];
};
-
/* Set PHY capabilities (direct 0x0601)
* NOTE: This command must be followed by setup link and restart auto-neg
*/
__le32 addr_low;
};
-
/* Set PHY config command data structure */
struct ice_aqc_set_phy_cfg_data {
__le64 phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */
#define ICE_AQ_PHY_ENA_AUTO_LINK_UPDT BIT(5)
#define ICE_AQ_PHY_ENA_LESM BIT(6)
#define ICE_AQ_PHY_ENA_AUTO_FEC BIT(7)
- u8 low_power_ctrl;
+ u8 low_power_ctrl_an;
__le16 eee_cap; /* Value from ice_aqc_get_phy_caps */
__le16 eeer_value;
u8 link_fec_opt; /* Use defines from ice_aqc_get_phy_caps */
- u8 rsvd1;
+ u8 module_compliance_enforcement;
};
-
/* Set MAC Config command data structure (direct 0x0603) */
struct ice_aqc_set_mac_cfg {
__le16 max_frame_size;
u8 reserved[7];
};
-
/* Restart AN command data structure (direct 0x0605)
* Also used for response, with only the lport_num field present.
*/
u8 reserved2[13];
};
-
/* Get link status (indirect 0x0607), also used for Link Status Event */
struct ice_aqc_get_link_status {
u8 lport_num;
__le32 addr_low;
};
-
/* Get link status response data structure, also used for Link Status Event */
struct ice_aqc_get_link_status_data {
u8 topo_media_conflict;
#define ICE_AQ_LINK_TX_ACTIVE 0
#define ICE_AQ_LINK_TX_DRAINED 1
#define ICE_AQ_LINK_TX_FLUSHED 3
- u8 reserved2;
+ u8 lb_status;
+#define ICE_AQ_LINK_LB_PHY_LCL BIT(0)
+#define ICE_AQ_LINK_LB_PHY_RMT BIT(1)
+#define ICE_AQ_LINK_LB_MAC_LCL BIT(2)
+#define ICE_AQ_LINK_LB_PHY_IDX_S 3
+#define ICE_AQ_LINK_LB_PHY_IDX_M (0x7 << ICE_AQ_LB_PHY_IDX_S)
__le16 max_frame_size;
u8 cfg;
#define ICE_AQ_LINK_25G_KR_FEC_EN BIT(0)
#define ICE_AQ_LINK_PWR_QSFP_CLASS_3 2
#define ICE_AQ_LINK_PWR_QSFP_CLASS_4 3
__le16 link_speed;
+#define ICE_AQ_LINK_SPEED_M 0x7FF
#define ICE_AQ_LINK_SPEED_10MB BIT(0)
#define ICE_AQ_LINK_SPEED_100MB BIT(1)
#define ICE_AQ_LINK_SPEED_1000MB BIT(2)
__le64 phy_type_high; /* Use values from ICE_PHY_TYPE_HIGH_* */
};
-
/* Set event mask command (direct 0x0613) */
struct ice_aqc_set_event_mask {
u8 lport_num;
#define ICE_AQ_LINK_EVENT_AN_COMPLETED BIT(7)
#define ICE_AQ_LINK_EVENT_MODULE_QUAL_FAIL BIT(8)
#define ICE_AQ_LINK_EVENT_PORT_TX_SUSPENDED BIT(9)
+#define ICE_AQ_LINK_EVENT_TOPO_CONFLICT BIT(10)
+#define ICE_AQ_LINK_EVENT_MEDIA_CONFLICT BIT(11)
u8 reserved1[6];
};
-
-
/* Set MAC Loopback command (direct 0x0620) */
struct ice_aqc_set_mac_lb {
u8 lb_mode;
u8 reserved[15];
};
-
-
-
+struct ice_aqc_link_topo_addr {
+ u8 lport_num;
+ u8 lport_num_valid;
+#define ICE_AQC_LINK_TOPO_PORT_NUM_VALID BIT(0)
+ u8 node_type_ctx;
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_S 0
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_M (0xF << ICE_AQC_LINK_TOPO_NODE_TYPE_S)
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_PHY 0
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_GPIO_CTRL 1
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_MUX_CTRL 2
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_LED_CTRL 3
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_LED 4
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_THERMAL 5
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_CAGE 6
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_MEZZ 7
+#define ICE_AQC_LINK_TOPO_NODE_TYPE_ID_EEPROM 8
+#define ICE_AQC_LINK_TOPO_NODE_CTX_S 4
+#define ICE_AQC_LINK_TOPO_NODE_CTX_M \
+ (0xF << ICE_AQC_LINK_TOPO_NODE_CTX_S)
+#define ICE_AQC_LINK_TOPO_NODE_CTX_GLOBAL 0
+#define ICE_AQC_LINK_TOPO_NODE_CTX_BOARD 1
+#define ICE_AQC_LINK_TOPO_NODE_CTX_PORT 2
+#define ICE_AQC_LINK_TOPO_NODE_CTX_NODE 3
+#define ICE_AQC_LINK_TOPO_NODE_CTX_PROVIDED 4
+#define ICE_AQC_LINK_TOPO_NODE_CTX_OVERRIDE 5
+ u8 index;
+ __le16 handle;
+#define ICE_AQC_LINK_TOPO_HANDLE_S 0
+#define ICE_AQC_LINK_TOPO_HANDLE_M (0x3FF << ICE_AQC_LINK_TOPO_HANDLE_S)
+/* Used to decode the handle field */
+#define ICE_AQC_LINK_TOPO_HANDLE_BRD_TYPE_M BIT(9)
+#define ICE_AQC_LINK_TOPO_HANDLE_BRD_TYPE_LOM BIT(9)
+#define ICE_AQC_LINK_TOPO_HANDLE_BRD_TYPE_MEZZ 0
+#define ICE_AQC_LINK_TOPO_HANDLE_NODE_S 0
+/* In case of a Mezzanine type */
+#define ICE_AQC_LINK_TOPO_HANDLE_MEZZ_NODE_M \
+ (0x3F << ICE_AQC_LINK_TOPO_HANDLE_NODE_S)
+#define ICE_AQC_LINK_TOPO_HANDLE_MEZZ_S 6
+#define ICE_AQC_LINK_TOPO_HANDLE_MEZZ_M (0x7 << ICE_AQC_LINK_TOPO_HANDLE_MEZZ_S)
+/* In case of a LOM type */
+#define ICE_AQC_LINK_TOPO_HANDLE_LOM_NODE_M \
+ (0x1FF << ICE_AQC_LINK_TOPO_HANDLE_NODE_S)
+};
+
+/* Get Link Topology Handle (direct, 0x06E0) */
+struct ice_aqc_get_link_topo {
+ struct ice_aqc_link_topo_addr addr;
+ u8 node_part_num;
+ u8 rsvd[9];
+};
/* Set Port Identification LED (direct, 0x06E9) */
struct ice_aqc_set_port_id_led {
u8 rsvd[13];
};
-
+/* Read/Write SFF EEPROM command (indirect 0x06EE) */
+struct ice_aqc_sff_eeprom {
+ u8 lport_num;
+ u8 lport_num_valid;
+#define ICE_AQC_SFF_PORT_NUM_VALID BIT(0)
+ __le16 i2c_bus_addr;
+#define ICE_AQC_SFF_I2CBUS_7BIT_M 0x7F
+#define ICE_AQC_SFF_I2CBUS_10BIT_M 0x3FF
+#define ICE_AQC_SFF_I2CBUS_TYPE_M BIT(10)
+#define ICE_AQC_SFF_I2CBUS_TYPE_7BIT 0
+#define ICE_AQC_SFF_I2CBUS_TYPE_10BIT ICE_AQC_SFF_I2CBUS_TYPE_M
+#define ICE_AQC_SFF_SET_EEPROM_PAGE_S 11
+#define ICE_AQC_SFF_SET_EEPROM_PAGE_M (0x3 << ICE_AQC_SFF_SET_EEPROM_PAGE_S)
+#define ICE_AQC_SFF_NO_PAGE_CHANGE 0
+#define ICE_AQC_SFF_SET_23_ON_MISMATCH 1
+#define ICE_AQC_SFF_SET_22_ON_MISMATCH 2
+#define ICE_AQC_SFF_IS_WRITE BIT(15)
+ __le16 i2c_mem_addr;
+ __le16 eeprom_page;
+#define ICE_AQC_SFF_EEPROM_BANK_S 0
+#define ICE_AQC_SFF_EEPROM_BANK_M (0xFF << ICE_AQC_SFF_EEPROM_BANK_S)
+#define ICE_AQC_SFF_EEPROM_PAGE_S 8
+#define ICE_AQC_SFF_EEPROM_PAGE_M (0xFF << ICE_AQC_SFF_EEPROM_PAGE_S)
+ __le32 addr_high;
+ __le32 addr_low;
+};
/* NVM Read command (indirect 0x0701)
* NVM Erase commands (direct 0x0702)
- * NVM Update commands (indirect 0x0703)
+ * NVM Write commands (indirect 0x0703)
+ * NVM Write Activate commands (direct 0x0707)
+ * NVM Shadow RAM Dump commands (direct 0x0707)
*/
struct ice_aqc_nvm {
+#define ICE_AQC_NVM_MAX_OFFSET 0xFFFFFF
__le16 offset_low;
- u8 offset_high;
+ u8 offset_high; /* For Write Activate offset_high is used as flags2 */
u8 cmd_flags;
#define ICE_AQC_NVM_LAST_CMD BIT(0)
-#define ICE_AQC_NVM_PCIR_REQ BIT(0) /* Used by NVM Update reply */
-#define ICE_AQC_NVM_PRESERVATION_S 1
+#define ICE_AQC_NVM_PCIR_REQ BIT(0) /* Used by NVM Write reply */
+#define ICE_AQC_NVM_PRESERVATION_S 1 /* Used by NVM Write Activate only */
#define ICE_AQC_NVM_PRESERVATION_M (3 << ICE_AQC_NVM_PRESERVATION_S)
#define ICE_AQC_NVM_NO_PRESERVATION (0 << ICE_AQC_NVM_PRESERVATION_S)
#define ICE_AQC_NVM_PRESERVE_ALL BIT(1)
#define ICE_AQC_NVM_FACTORY_DEFAULT (2 << ICE_AQC_NVM_PRESERVATION_S)
#define ICE_AQC_NVM_PRESERVE_SELECTED (3 << ICE_AQC_NVM_PRESERVATION_S)
+#define ICE_AQC_NVM_ACTIV_SEL_NVM BIT(3) /* Write Activate/SR Dump only */
+#define ICE_AQC_NVM_ACTIV_SEL_OROM BIT(4)
+#define ICE_AQC_NVM_ACTIV_SEL_NETLIST BIT(5)
+#define ICE_AQC_NVM_SPECIAL_UPDATE BIT(6)
+#define ICE_AQC_NVM_REVERT_LAST_ACTIV BIT(6) /* Write Activate only */
+#define ICE_AQC_NVM_ACTIV_SEL_MASK MAKEMASK(0x7, 3)
#define ICE_AQC_NVM_FLASH_ONLY BIT(7)
__le16 module_typeid;
__le16 length;
__le32 addr_low;
};
+/* NVM Module_Type ID, needed offset and read_len for struct ice_aqc_nvm. */
+#define ICE_AQC_NVM_SECTOR_UNIT 4096 /* In Bytes */
+#define ICE_AQC_NVM_WORD_UNIT 2 /* In Bytes */
+
+#define ICE_AQC_NVM_START_POINT 0
+#define ICE_AQC_NVM_EMP_SR_PTR_OFFSET 0x90
+#define ICE_AQC_NVM_EMP_SR_PTR_RD_LEN 2 /* In Bytes */
+#define ICE_AQC_NVM_EMP_SR_PTR_M MAKEMASK(0x7FFF, 0)
+#define ICE_AQC_NVM_EMP_SR_PTR_TYPE_S 15
+#define ICE_AQC_NVM_EMP_SR_PTR_TYPE_M BIT(15)
+#define ICE_AQC_NVM_EMP_SR_PTR_TYPE_SECTOR 1
+
+#define ICE_AQC_NVM_LLDP_CFG_PTR_OFFSET 0x46
+#define ICE_AQC_NVM_LLDP_CFG_HEADER_LEN 2 /* In Bytes */
+#define ICE_AQC_NVM_LLDP_CFG_PTR_RD_LEN 2 /* In Bytes */
+
+#define ICE_AQC_NVM_LLDP_PRESERVED_MOD_ID 0x129
+#define ICE_AQC_NVM_CUR_LLDP_PERSIST_RD_OFFSET 2 /* In Bytes */
+#define ICE_AQC_NVM_LLDP_STATUS_M MAKEMASK(0xF, 0)
+#define ICE_AQC_NVM_LLDP_STATUS_M_LEN 4 /* In Bits */
+#define ICE_AQC_NVM_LLDP_STATUS_RD_LEN 4 /* In Bytes */
+
+/* The result of netlist NVM read comes in a TLV format. The actual data
+ * (netlist header) starts from word offset 1 (byte 2). The FW strips
+ * out the type field from the TLV header so all the netlist fields
+ * should adjust their offset value by 1 word (2 bytes) in order to map
+ * their correct location.
+ */
+#define ICE_AQC_NVM_LINK_TOPO_NETLIST_MOD_ID 0x11B
+#define ICE_AQC_NVM_LINK_TOPO_NETLIST_LEN_OFFSET 1
+#define ICE_AQC_NVM_LINK_TOPO_NETLIST_LEN 2 /* In bytes */
+#define ICE_AQC_NVM_NETLIST_NODE_COUNT_OFFSET 2
+#define ICE_AQC_NVM_NETLIST_NODE_COUNT_LEN 2 /* In bytes */
+#define ICE_AQC_NVM_NETLIST_ID_BLK_START_OFFSET 5
+#define ICE_AQC_NVM_NETLIST_ID_BLK_LEN 0x30 /* In words */
+
+/* netlist ID block field offsets (word offsets) */
+#define ICE_AQC_NVM_NETLIST_ID_BLK_MAJOR_VER_LOW 2
+#define ICE_AQC_NVM_NETLIST_ID_BLK_MAJOR_VER_HIGH 3
+#define ICE_AQC_NVM_NETLIST_ID_BLK_MINOR_VER_LOW 4
+#define ICE_AQC_NVM_NETLIST_ID_BLK_MINOR_VER_HIGH 5
+#define ICE_AQC_NVM_NETLIST_ID_BLK_TYPE_LOW 6
+#define ICE_AQC_NVM_NETLIST_ID_BLK_TYPE_HIGH 7
+#define ICE_AQC_NVM_NETLIST_ID_BLK_REV_LOW 8
+#define ICE_AQC_NVM_NETLIST_ID_BLK_REV_HIGH 9
+#define ICE_AQC_NVM_NETLIST_ID_BLK_SHA_HASH 0xA
+#define ICE_AQC_NVM_NETLIST_ID_BLK_CUST_VER 0x2F
/* Used for 0x0704 as well as for 0x0705 commands */
struct ice_aqc_nvm_cfg {
__le32 addr_low;
};
-
struct ice_aqc_nvm_cfg_data {
__le16 field_id;
__le16 field_options;
__le16 field_value;
};
-
/* NVM Checksum Command (direct, 0x0706) */
struct ice_aqc_nvm_checksum {
u8 flags;
u8 rsvd2[12];
};
-
-
-
/* Get LLDP MIB (indirect 0x0A00)
* Note: This is also used by the LLDP MIB Change Event (0x0A01)
* as the format is the same.
};
/* Set Local LLDP MIB (indirect 0x0A08)
- * Used to replace the local MIB of a given LLDP agent. e.g. DCBx
+ * Used to replace the local MIB of a given LLDP agent. e.g. DCBX
*/
struct ice_aqc_lldp_set_local_mib {
u8 type;
};
/* Stop/Start LLDP Agent (direct 0x0A09)
- * Used for stopping/starting specific LLDP agent. e.g. DCBx.
+ * Used for stopping/starting specific LLDP agent. e.g. DCBX.
* The same structure is used for the response, with the command field
* being used as the status field.
*/
u8 reserved[15];
};
-
/* Get/Set RSS key (indirect 0x0B04/0x0B02) */
struct ice_aqc_get_set_rss_key {
#define ICE_AQC_GSET_RSS_KEY_VSI_VALID BIT(15)
__le32 addr_low;
};
-
#define ICE_AQC_GET_SET_RSS_KEY_DATA_RSS_KEY_SIZE 0x28
#define ICE_AQC_GET_SET_RSS_KEY_DATA_HASH_KEY_SIZE 0xC
#define ICE_GET_SET_RSS_KEY_EXTEND_KEY_SIZE \
u8 extended_hash_key[ICE_AQC_GET_SET_RSS_KEY_DATA_HASH_KEY_SIZE];
};
-
/* Get/Set RSS LUT (indirect 0x0B05/0x0B03) */
struct ice_aqc_get_set_rss_lut {
#define ICE_AQC_GSET_RSS_LUT_VSI_VALID BIT(15)
__le32 addr_low;
};
-
/* Clear FD Table Command (direct, 0x0B06) */
struct ice_aqc_clear_fd_table {
u8 clear_type;
u8 reserved[12];
};
+/* ACL - allocate (indirect 0x0C10) table */
+#define ICE_AQC_ACL_KEY_WIDTH 40
+#define ICE_AQC_ACL_KEY_WIDTH_BYTES 5
+#define ICE_AQC_ACL_TCAM_DEPTH 512
+#define ICE_ACL_ENTRY_ALLOC_UNIT 64
+#define ICE_AQC_MAX_CONCURRENT_ACL_TBL 15
+#define ICE_AQC_MAX_ACTION_MEMORIES 20
+#define ICE_AQC_MAX_ACTION_ENTRIES 512
+#define ICE_AQC_ACL_SLICES 16
+#define ICE_AQC_ALLOC_ID_LESS_THAN_4K 0x1000
+/* The ACL block supports up to 8 actions per a single output. */
+#define ICE_AQC_TBL_MAX_ACTION_PAIRS 4
+
+#define ICE_AQC_MAX_TCAM_ALLOC_UNITS (ICE_AQC_ACL_TCAM_DEPTH / \
+ ICE_ACL_ENTRY_ALLOC_UNIT)
+#define ICE_AQC_ACL_ALLOC_UNITS (ICE_AQC_ACL_SLICES * \
+ ICE_AQC_MAX_TCAM_ALLOC_UNITS)
+
+struct ice_aqc_acl_alloc_table {
+ __le16 table_width;
+ __le16 table_depth;
+ u8 act_pairs_per_entry;
+ /* For non-concurrent table allocation, this field needs
+ * to be set to zero(0) otherwise it shall specify the
+ * amount of concurrent tables whose AllocIDs are
+ * specified in buffer. Thus the newly allocated table
+ * is concurrent with table IDs specified in AllocIDs.
+ */
+#define ICE_AQC_ACL_ALLOC_TABLE_TYPE_NONCONCURR 0
+ u8 table_type;
+ __le16 reserved;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Allocate ACL table command buffer format */
+struct ice_aqc_acl_alloc_table_data {
+ /* Dependent table AllocIDs. Each word in this 15 word array specifies
+ * a dependent table AllocID according to the amount specified in the
+ * "table_type" field. All unused words shall be set to 0xFFFF
+ */
+#define ICE_AQC_CONCURR_ID_INVALID 0xffff
+ __le16 alloc_ids[ICE_AQC_MAX_CONCURRENT_ACL_TBL];
+};
+
+/* ACL - deallocate (indirect 0x0C11) table
+ * ACL - allocate (indirect 0x0C12) action-pair
+ * ACL - deallocate (indirect 0x0C13) action-pair
+ */
+
+/* Following structure is common and used in case of deallocation
+ * of ACL table and action-pair
+ */
+struct ice_aqc_acl_tbl_actpair {
+ /* Alloc ID of the table being released */
+ __le16 alloc_id;
+ u8 reserved[6];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* This response structure is same in case of alloc/dealloc table,
+ * alloc/dealloc action-pair
+ */
+struct ice_aqc_acl_generic {
+ /* if alloc_id is below 0x1000 then alllocation failed due to
+ * unavailable resources, else this is set by FW to identify
+ * table allocation
+ */
+ __le16 alloc_id;
+
+ union {
+ /* to be used only in case of alloc/dealloc table */
+ struct {
+ /* Index of the first TCAM block, otherwise set to 0xFF
+ * for a failed allocation
+ */
+ u8 first_tcam;
+ /* Index of the last TCAM block. This index shall be
+ * set to the value of first_tcam for single TCAM block
+ * allocation, otherwise set to 0xFF for a failed
+ * allocation
+ */
+ u8 last_tcam;
+ } table;
+ /* reserved in case of alloc/dealloc action-pair */
+ struct {
+ __le16 reserved;
+ } act_pair;
+ } ops;
+
+ /* index of first entry (in both TCAM and action memories),
+ * otherwise set to 0xFF for a failed allocation
+ */
+ __le16 first_entry;
+ /* index of last entry (in both TCAM and action memories),
+ * otherwise set to 0xFF for a failed allocation
+ */
+ __le16 last_entry;
+
+ /* Each act_mem element specifies the order of the memory
+ * otherwise 0xFF
+ */
+ u8 act_mem[ICE_AQC_MAX_ACTION_MEMORIES];
+};
+
+/* ACL - allocate (indirect 0x0C14) scenario. This command doesn't have separate
+ * response buffer since original command buffer gets updated with
+ * 'scen_id' in case of success
+ */
+struct ice_aqc_acl_alloc_scen {
+ union {
+ struct {
+ u8 reserved[8];
+ } cmd;
+ struct {
+ __le16 scen_id;
+ u8 reserved[6];
+ } resp;
+ } ops;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* ACL - de-allocate (direct 0x0C15) scenario. This command doesn't need
+ * separate response buffer since nothing to be returned as a response
+ * except status.
+ */
+struct ice_aqc_acl_dealloc_scen {
+ __le16 scen_id;
+ u8 reserved[14];
+};
+
+/* ACL - update (direct 0x0C1B) scenario */
+/* ACL - query (direct 0x0C23) scenario */
+struct ice_aqc_acl_update_query_scen {
+ __le16 scen_id;
+ u8 reserved[6];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Input buffer format in case allocate/update ACL scenario and same format
+ * is used for response buffer in case of query ACL scenario.
+ * NOTE: de-allocate ACL scenario is direct command and doesn't require
+ * "buffer", hence no buffer format.
+ */
+struct ice_aqc_acl_scen {
+ struct {
+ /* Byte [x] selection for the TCAM key. This value must be set
+ * set to 0x0 for unusued TCAM.
+ * Only Bit 6..0 is used in each byte and MSB is reserved
+ */
+#define ICE_AQC_ACL_ALLOC_SCE_SELECT_M 0x7F
+#define ICE_AQC_ACL_BYTE_SEL_BASE 0x20
+#define ICE_AQC_ACL_BYTE_SEL_BASE_PID 0x3E
+#define ICE_AQC_ACL_BYTE_SEL_BASE_PKT_DIR ICE_AQC_ACL_BYTE_SEL_BASE
+#define ICE_AQC_ACL_BYTE_SEL_BASE_RNG_CHK 0x3F
+ u8 tcam_select[5];
+ /* TCAM Block entry masking. This value should be set to 0x0 for
+ * unused TCAM
+ */
+ u8 chnk_msk;
+ /* Bit 0 : masks TCAM entries 0-63
+ * Bit 1 : masks TCAM entries 64-127
+ * Bit 2 to 7 : follow the pattern of bit 0 and 1
+ */
+#define ICE_AQC_ACL_ALLOC_SCE_START_CMP BIT(0)
+#define ICE_AQC_ACL_ALLOC_SCE_START_SET BIT(1)
+ u8 start_cmp_set;
+
+ } tcam_cfg[ICE_AQC_ACL_SLICES];
+
+ /* Each byte, Bit 6..0: Action memory association to a TCAM block,
+ * otherwise it shall be set to 0x0 for disabled memory action.
+ * Bit 7 : Action memory enable for this scenario
+ */
+#define ICE_AQC_ACL_SCE_ACT_MEM_TCAM_ASSOC_M 0x7F
+#define ICE_AQC_ACL_SCE_ACT_MEM_EN BIT(7)
+ u8 act_mem_cfg[ICE_AQC_MAX_ACTION_MEMORIES];
+};
+
+/* ACL - allocate (indirect 0x0C16) counters */
+struct ice_aqc_acl_alloc_counters {
+ /* Amount of contiguous counters requested. Min value is 1 and
+ * max value is 255
+ */
+#define ICE_AQC_ACL_ALLOC_CNT_MIN_AMT 0x1
+#define ICE_AQC_ACL_ALLOC_CNT_MAX_AMT 0xFF
+ u8 counter_amount;
+
+ /* Counter type: 'single counter' which can be configured to count
+ * either bytes or packets
+ */
+#define ICE_AQC_ACL_CNT_TYPE_SINGLE 0x0
+
+ /* Counter type: 'counter pair' which counts number of bytes and number
+ * of packets.
+ */
+#define ICE_AQC_ACL_CNT_TYPE_DUAL 0x1
+ /* requested counter type, single/dual */
+ u8 counters_type;
+
+ /* counter bank allocation shall be 0-3 for 'byte or packet counter' */
+#define ICE_AQC_ACL_MAX_CNT_SINGLE 0x3
+/* counter bank allocation shall be 0-1 for 'byte and packet counter dual' */
+#define ICE_AQC_ACL_MAX_CNT_DUAL 0x1
+ /* requested counter bank allocation */
+ u8 bank_alloc;
+
+ u8 reserved;
+
+ union {
+ /* Applicable only in case of command */
+ struct {
+ u8 reserved[12];
+ } cmd;
+ /* Applicable only in case of response */
+#define ICE_AQC_ACL_ALLOC_CNT_INVAL 0xFFFF
+ struct {
+ /* Index of first allocated counter. 0xFFFF in case
+ * of unsuccessful allocation
+ */
+ __le16 first_counter;
+ /* Index of last allocated counter. 0xFFFF in case
+ * of unsuccessful allocation
+ */
+ __le16 last_counter;
+ u8 rsvd[8];
+ } resp;
+ } ops;
+};
+
+/* ACL - de-allocate (direct 0x0C17) counters */
+struct ice_aqc_acl_dealloc_counters {
+ /* first counter being released */
+ __le16 first_counter;
+ /* last counter being released */
+ __le16 last_counter;
+ /* requested counter type, single/dual */
+ u8 counters_type;
+ /* requested counter bank allocation */
+ u8 bank_alloc;
+ u8 reserved[10];
+};
+
+/* ACL - de-allocate (direct 0x0C1A) resources. Used by SW to release all the
+ * resources allocated for it using a single command
+ */
+struct ice_aqc_acl_dealloc_res {
+ u8 reserved[16];
+};
+
+/* ACL - program actionpair (indirect 0x0C1C) */
+/* ACL - query actionpair (indirect 0x0C25) */
+struct ice_aqc_acl_actpair {
+ /* action mem index to program/update */
+ u8 act_mem_index;
+ u8 reserved;
+ /* The entry index in action memory to be programmed/updated */
+ __le16 act_entry_index;
+ __le32 reserved2;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Input buffer format for program/query action-pair admin command */
+struct ice_acl_act_entry {
+ /* Action priority, values must be between 0..7 */
+#define ICE_AQC_ACT_PRIO_VALID_MAX 7
+#define ICE_AQC_ACT_PRIO_MSK MAKEMASK(0xff, 0)
+ u8 prio;
+ /* Action meta-data identifier. This field should be set to 0x0
+ * for a NOP action
+ */
+#define ICE_AQC_ACT_MDID_S 8
+#define ICE_AQC_ACT_MDID_MSK MAKEMASK(0xff00, ICE_AQC_ACT_MDID_S)
+ u8 mdid;
+ /* Action value */
+#define ICE_AQC_ACT_VALUE_S 16
+#define ICE_AQC_ACT_VALUE_MSK MAKEMASK(0xffff0000, 16)
+ __le16 value;
+};
+
+#define ICE_ACL_NUM_ACT_PER_ACT_PAIR 2
+struct ice_aqc_actpair {
+ struct ice_acl_act_entry act[ICE_ACL_NUM_ACT_PER_ACT_PAIR];
+};
+
+/* Generic format used to describe either input or response buffer
+ * for admin commands related to ACL profile
+ */
+struct ice_aqc_acl_prof_generic_frmt {
+ /* The first byte of the byte selection base is reserved to keep the
+ * first byte of the field vector where the packet direction info is
+ * available. Thus we should start at index 1 of the field vector to
+ * map its entries to the byte selection base.
+ */
+#define ICE_AQC_ACL_PROF_BYTE_SEL_START_IDX 1
+ /* In each byte:
+ * Bit 0..5 = Byte selection for the byte selection base from the
+ * extracted fields (expressed as byte offset in extracted fields).
+ * Applicable values are 0..63
+ * Bit 6..7 = Reserved
+ */
+#define ICE_AQC_ACL_PROF_BYTE_SEL_ELEMS 30
+ u8 byte_selection[ICE_AQC_ACL_PROF_BYTE_SEL_ELEMS];
+ /* In each byte:
+ * Bit 0..4 = Word selection for the word selection base from the
+ * extracted fields (expressed as word offset in extracted fields).
+ * Applicable values are 0..31
+ * Bit 5..7 = Reserved
+ */
+#define ICE_AQC_ACL_PROF_WORD_SEL_ELEMS 32
+ u8 word_selection[ICE_AQC_ACL_PROF_WORD_SEL_ELEMS];
+ /* In each byte:
+ * Bit 0..3 = Double word selection for the double-word selection base
+ * from the extracted fields (expressed as double-word offset in
+ * extracted fields).
+ * Applicable values are 0..15
+ * Bit 4..7 = Reserved
+ */
+#define ICE_AQC_ACL_PROF_DWORD_SEL_ELEMS 15
+ u8 dword_selection[ICE_AQC_ACL_PROF_DWORD_SEL_ELEMS];
+ /* Scenario numbers for individual Physical Function's */
+#define ICE_AQC_ACL_PROF_PF_SCEN_NUM_ELEMS 8
+ u8 pf_scenario_num[ICE_AQC_ACL_PROF_PF_SCEN_NUM_ELEMS];
+};
+
+/* ACL - program ACL profile extraction (indirect 0x0C1D) */
+/* ACL - program ACL profile ranges (indirect 0x0C1E) */
+/* ACL - query ACL profile (indirect 0x0C21) */
+/* ACL - query ACL profile ranges (indirect 0x0C22) */
+struct ice_aqc_acl_profile {
+ u8 profile_id; /* Programmed/Updated profile ID */
+ u8 reserved[7];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Input buffer format for program profile extraction admin command and
+ * response buffer format for query profile admin command is as defined
+ * in struct ice_aqc_acl_prof_generic_frmt
+ */
+
+/* Input buffer format for program profile ranges and query profile ranges
+ * admin commands. Same format is used for response buffer in case of query
+ * profile ranges command
+ */
+struct ice_acl_rng_data {
+ /* The range checker output shall be sent when the value
+ * related to this range checker is lower than low boundary
+ */
+ __be16 low_boundary;
+ /* The range checker output shall be sent when the value
+ * related to this range checker is higher than high boundary
+ */
+ __be16 high_boundary;
+ /* A value of '0' in bit shall clear the relevant bit input
+ * to the range checker
+ */
+ __be16 mask;
+};
+
+struct ice_aqc_acl_profile_ranges {
+#define ICE_AQC_ACL_PROF_RANGES_NUM_CFG 8
+ struct ice_acl_rng_data checker_cfg[ICE_AQC_ACL_PROF_RANGES_NUM_CFG];
+};
+/* ACL - program ACL entry (indirect 0x0C20) */
+/* ACL - query ACL entry (indirect 0x0C24) */
+struct ice_aqc_acl_entry {
+ u8 tcam_index; /* Updated TCAM block index */
+ u8 reserved;
+ __le16 entry_index; /* Updated entry index */
+ __le32 reserved2;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Input buffer format in case of program ACL entry and response buffer format
+ * in case of query ACL entry
+ */
+struct ice_aqc_acl_data {
+ /* Entry key and entry key invert are 40 bits wide.
+ * Byte 0..4 : entry key and Byte 5..7 are reserved
+ * Byte 8..12: entry key invert and Byte 13..15 are reserved
+ */
+ struct {
+ u8 val[5];
+ u8 reserved[3];
+ } entry_key, entry_key_invert;
+};
+/* ACL - query ACL counter (direct 0x0C27) */
+struct ice_aqc_acl_query_counter {
+ /* Queried counter index */
+ __le16 counter_index;
+ /* Queried counter bank */
+ u8 counter_bank;
+ union {
+ struct {
+ u8 reserved[13];
+ } cmd;
+ struct {
+ /* Holds counter value/packet counter value */
+ u8 val[5];
+ u8 reserved[8];
+ } resp;
+ } ops;
+};
/* Add Tx LAN Queues (indirect 0x0C30) */
struct ice_aqc_add_txqs {
__le32 addr_low;
};
-
/* This is the descriptor of each queue entry for the Add Tx LAN Queues
* command (0x0C30). Only used within struct ice_aqc_add_tx_qgrp.
*/
struct ice_aqc_txsched_elem info;
};
-
/* The format of the command buffer for Add Tx LAN Queues (0x0C30)
* is an array of the following structs. Please note that the length of
* each struct ice_aqc_add_tx_qgrp is variable due
struct ice_aqc_add_txqs_perq txqs[1];
};
-
/* Disable Tx LAN Queues (indirect 0x0C31) */
struct ice_aqc_dis_txqs {
u8 cmd_type;
__le32 addr_low;
};
-
/* The buffer for Disable Tx LAN Queues (indirect 0x0C31)
* contains the following structures, arrayed one after the
* other.
(1 << ICE_AQC_Q_DIS_BUF_ELEM_TYPE_S)
};
-
struct ice_aqc_dis_txq {
struct ice_aqc_dis_txq_item qgrps[1];
};
-
/* Tx LAN Queues Cleanup Event (0x0C31) */
struct ice_aqc_txqs_cleanup {
__le16 caller_opc;
u8 reserved[12];
};
-
/* Move / Reconfigure Tx Queues (indirect 0x0C32) */
struct ice_aqc_move_txqs {
u8 cmd_type;
__le32 addr_low;
};
-
-/* This is the descriptor of each queue entry for the move Tx LAN Queues
- * command (0x0C32).
- */
+/* Per-queue data buffer for the Move Tx LAN Queues command/response */
struct ice_aqc_move_txqs_elem {
__le16 txq_id;
u8 q_cgd;
__le32 q_teid;
};
-
+/* Indirect data buffer for the Move Tx LAN Queues command/response */
struct ice_aqc_move_txqs_data {
__le32 src_teid;
__le32 dest_teid;
struct ice_aqc_move_txqs_elem txqs[1];
};
-
-
/* Download Package (indirect 0x0C40) */
/* Also used for Update Package (indirect 0x0C42) */
struct ice_aqc_download_pkg {
struct ice_aqc_get_pkg_info pkg_info[1];
};
-
-
+/* Driver Shared Parameters (direct, 0x0C90) */
+struct ice_aqc_driver_shared_params {
+ u8 set_or_get_op;
+#define ICE_AQC_DRIVER_PARAM_OP_MASK BIT(0)
+#define ICE_AQC_DRIVER_PARAM_SET 0
+#define ICE_AQC_DRIVER_PARAM_GET 1
+ u8 param_indx;
+#define ICE_AQC_DRIVER_PARAM_MAX_IDX 15
+ u8 rsvd[2];
+ __le32 param_val;
+ __le32 addr_high;
+ __le32 addr_low;
+};
/* Lan Queue Overflow Event (direct, 0x1001) */
struct ice_aqc_event_lan_overflow {
u8 reserved[8];
};
-
-
-/* Configure Firmware Logging Command (indirect 0xFF09)
- * Logging Information Read Response (indirect 0xFF10)
- * Note: The 0xFF10 command has no input parameters.
- */
-struct ice_aqc_fw_logging {
- u8 log_ctrl;
-#define ICE_AQC_FW_LOG_AQ_EN BIT(0)
-#define ICE_AQC_FW_LOG_UART_EN BIT(1)
- u8 rsvd0;
- u8 log_ctrl_valid; /* Not used by 0xFF10 Response */
-#define ICE_AQC_FW_LOG_AQ_VALID BIT(0)
-#define ICE_AQC_FW_LOG_UART_VALID BIT(1)
- u8 rsvd1[5];
- __le32 addr_high;
- __le32 addr_low;
-};
-
-
-enum ice_aqc_fw_logging_mod {
- ICE_AQC_FW_LOG_ID_GENERAL = 0,
- ICE_AQC_FW_LOG_ID_CTRL,
- ICE_AQC_FW_LOG_ID_LINK,
- ICE_AQC_FW_LOG_ID_LINK_TOPO,
- ICE_AQC_FW_LOG_ID_DNL,
- ICE_AQC_FW_LOG_ID_I2C,
- ICE_AQC_FW_LOG_ID_SDP,
- ICE_AQC_FW_LOG_ID_MDIO,
- ICE_AQC_FW_LOG_ID_ADMINQ,
- ICE_AQC_FW_LOG_ID_HDMA,
- ICE_AQC_FW_LOG_ID_LLDP,
- ICE_AQC_FW_LOG_ID_DCBX,
- ICE_AQC_FW_LOG_ID_DCB,
- ICE_AQC_FW_LOG_ID_NETPROXY,
- ICE_AQC_FW_LOG_ID_NVM,
- ICE_AQC_FW_LOG_ID_AUTH,
- ICE_AQC_FW_LOG_ID_VPD,
- ICE_AQC_FW_LOG_ID_IOSF,
- ICE_AQC_FW_LOG_ID_PARSER,
- ICE_AQC_FW_LOG_ID_SW,
- ICE_AQC_FW_LOG_ID_SCHEDULER,
- ICE_AQC_FW_LOG_ID_TXQ,
- ICE_AQC_FW_LOG_ID_RSVD,
- ICE_AQC_FW_LOG_ID_POST,
- ICE_AQC_FW_LOG_ID_WATCHDOG,
- ICE_AQC_FW_LOG_ID_TASK_DISPATCH,
- ICE_AQC_FW_LOG_ID_MNG,
- ICE_AQC_FW_LOG_ID_SYNCE,
- ICE_AQC_FW_LOG_ID_MAX,
-};
-
-/* This is the buffer for both of the logging commands.
- * The entry array size depends on the datalen parameter in the descriptor.
- * There will be a total of datalen / 2 entries.
- */
-struct ice_aqc_fw_logging_data {
- __le16 entry[1];
-#define ICE_AQC_FW_LOG_ID_S 0
-#define ICE_AQC_FW_LOG_ID_M (0xFFF << ICE_AQC_FW_LOG_ID_S)
-
-#define ICE_AQC_FW_LOG_CONF_SUCCESS 0 /* Used by response */
-#define ICE_AQC_FW_LOG_CONF_BAD_INDX BIT(12) /* Used by response */
-
-#define ICE_AQC_FW_LOG_EN_S 12
-#define ICE_AQC_FW_LOG_EN_M (0xF << ICE_AQC_FW_LOG_EN_S)
-#define ICE_AQC_FW_LOG_INFO_EN BIT(12) /* Used by command */
-#define ICE_AQC_FW_LOG_INIT_EN BIT(13) /* Used by command */
-#define ICE_AQC_FW_LOG_FLOW_EN BIT(14) /* Used by command */
-#define ICE_AQC_FW_LOG_ERR_EN BIT(15) /* Used by command */
-};
-
-
-/* Get/Clear FW Log (indirect 0xFF11) */
-struct ice_aqc_get_clear_fw_log {
- u8 flags;
-#define ICE_AQC_FW_LOG_CLEAR BIT(0)
-#define ICE_AQC_FW_LOG_MORE_DATA_AVAIL BIT(1)
- u8 rsvd1[7];
- __le32 addr_high;
- __le32 addr_low;
-};
-
-
/**
* struct ice_aq_desc - Admin Queue (AQ) descriptor
* @flags: ICE_AQ_FLAG_* flags
struct ice_aqc_get_phy_caps get_phy;
struct ice_aqc_set_phy_cfg set_phy;
struct ice_aqc_restart_an restart_an;
+ struct ice_aqc_sff_eeprom read_write_sff_param;
struct ice_aqc_set_port_id_led set_port_id_led;
struct ice_aqc_get_sw_cfg get_sw_conf;
struct ice_aqc_sw_rules sw_rules;
struct ice_aqc_get_set_rss_lut get_set_rss_lut;
struct ice_aqc_get_set_rss_key get_set_rss_key;
struct ice_aqc_clear_fd_table clear_fd_table;
+ struct ice_aqc_acl_alloc_table alloc_table;
+ struct ice_aqc_acl_tbl_actpair tbl_actpair;
+ struct ice_aqc_acl_alloc_scen alloc_scen;
+ struct ice_aqc_acl_dealloc_scen dealloc_scen;
+ struct ice_aqc_acl_update_query_scen update_query_scen;
+ struct ice_aqc_acl_alloc_counters alloc_counters;
+ struct ice_aqc_acl_dealloc_counters dealloc_counters;
+ struct ice_aqc_acl_dealloc_res dealloc_res;
+ struct ice_aqc_acl_entry program_query_entry;
+ struct ice_aqc_acl_actpair program_query_actpair;
+ struct ice_aqc_acl_profile profile;
+ struct ice_aqc_acl_query_counter query_counter;
struct ice_aqc_add_txqs add_txqs;
struct ice_aqc_dis_txqs dis_txqs;
+ struct ice_aqc_move_txqs move_txqs;
struct ice_aqc_txqs_cleanup txqs_cleanup;
struct ice_aqc_add_get_update_free_vsi vsi_cmd;
struct ice_aqc_add_update_free_vsi_resp add_update_free_vsi_res;
struct ice_aqc_get_vsi_resp get_vsi_resp;
struct ice_aqc_download_pkg download_pkg;
struct ice_aqc_get_pkg_info_list get_pkg_info_list;
- struct ice_aqc_fw_logging fw_logging;
- struct ice_aqc_get_clear_fw_log get_clear_fw_log;
+ struct ice_aqc_driver_shared_params drv_shared_params;
struct ice_aqc_set_mac_lb set_mac_lb;
struct ice_aqc_alloc_free_res_cmd sw_res_ctrl;
struct ice_aqc_get_res_alloc get_res;
struct ice_aqc_set_mac_cfg set_mac_cfg;
struct ice_aqc_set_event_mask set_event_mask;
struct ice_aqc_get_link_status get_link_status;
+ struct ice_aqc_event_lan_overflow lan_overflow;
+ struct ice_aqc_get_link_topo get_link_topo;
} params;
};
-
/* FW defined boundary for a large buffer, 4k >= Large buffer > 512 bytes */
#define ICE_AQ_LG_BUF 512
ICE_AQ_RC_ESVN = 26, /* SVN number prohibits this package */
ICE_AQ_RC_EBADMAN = 27, /* Manifest hash mismatch */
ICE_AQ_RC_EBADBUF = 28, /* Buffer hash mismatches manifest */
+ ICE_AQ_RC_EACCES_BMCU = 29, /* BMC Update in progress */
};
/* Admin Queue command opcodes */
ice_aqc_opc_get_link_status = 0x0607,
ice_aqc_opc_set_event_mask = 0x0613,
ice_aqc_opc_set_mac_lb = 0x0620,
+ ice_aqc_opc_get_link_topo = 0x06E0,
ice_aqc_opc_set_port_id_led = 0x06E9,
ice_aqc_opc_get_port_options = 0x06EA,
ice_aqc_opc_set_port_option = 0x06EB,
ice_aqc_opc_set_gpio = 0x06EC,
ice_aqc_opc_get_gpio = 0x06ED,
+ ice_aqc_opc_sff_eeprom = 0x06EE,
/* NVM commands */
ice_aqc_opc_nvm_read = 0x0701,
ice_aqc_opc_nvm_erase = 0x0702,
- ice_aqc_opc_nvm_update = 0x0703,
+ ice_aqc_opc_nvm_write = 0x0703,
ice_aqc_opc_nvm_cfg_read = 0x0704,
ice_aqc_opc_nvm_cfg_write = 0x0705,
ice_aqc_opc_nvm_checksum = 0x0706,
+ ice_aqc_opc_nvm_write_activate = 0x0707,
+ ice_aqc_opc_nvm_sr_dump = 0x0707,
+ ice_aqc_opc_nvm_save_factory_settings = 0x0708,
+ ice_aqc_opc_nvm_update_empr = 0x0709,
/* LLDP commands */
ice_aqc_opc_lldp_get_mib = 0x0A00,
ice_aqc_opc_get_rss_key = 0x0B04,
ice_aqc_opc_get_rss_lut = 0x0B05,
ice_aqc_opc_clear_fd_table = 0x0B06,
+ /* ACL commands */
+ ice_aqc_opc_alloc_acl_tbl = 0x0C10,
+ ice_aqc_opc_dealloc_acl_tbl = 0x0C11,
+ ice_aqc_opc_alloc_acl_actpair = 0x0C12,
+ ice_aqc_opc_dealloc_acl_actpair = 0x0C13,
+ ice_aqc_opc_alloc_acl_scen = 0x0C14,
+ ice_aqc_opc_dealloc_acl_scen = 0x0C15,
+ ice_aqc_opc_alloc_acl_counters = 0x0C16,
+ ice_aqc_opc_dealloc_acl_counters = 0x0C17,
+ ice_aqc_opc_dealloc_acl_res = 0x0C1A,
+ ice_aqc_opc_update_acl_scen = 0x0C1B,
+ ice_aqc_opc_program_acl_actpair = 0x0C1C,
+ ice_aqc_opc_program_acl_prof_extraction = 0x0C1D,
+ ice_aqc_opc_program_acl_prof_ranges = 0x0C1E,
+ ice_aqc_opc_program_acl_entry = 0x0C20,
+ ice_aqc_opc_query_acl_prof = 0x0C21,
+ ice_aqc_opc_query_acl_prof_ranges = 0x0C22,
+ ice_aqc_opc_query_acl_scen = 0x0C23,
+ ice_aqc_opc_query_acl_entry = 0x0C24,
+ ice_aqc_opc_query_acl_actpair = 0x0C25,
+ ice_aqc_opc_query_acl_counter = 0x0C27,
/* Tx queue handling commands/events */
ice_aqc_opc_add_txqs = 0x0C30,
ice_aqc_opc_update_pkg = 0x0C42,
ice_aqc_opc_get_pkg_info_list = 0x0C43,
-
+ ice_aqc_opc_driver_shared_params = 0x0C90,
/* Standalone Commands/Events */
ice_aqc_opc_event_lan_overflow = 0x1001,
-
- /* debug commands */
- ice_aqc_opc_fw_logging = 0xFF09,
- ice_aqc_opc_fw_logging_info = 0xFF10,
- ice_aqc_opc_get_clear_fw_log = 0xFF11
};
#endif /* _ICE_ADMINQ_CMD_H_ */
git.droids-corp.org / dpdk.git / blobdiff