ICE_CTX_STORE(ice_tlan_ctx, vmvf_type, 2, 78),
ICE_CTX_STORE(ice_tlan_ctx, src_vsi, 10, 80),
ICE_CTX_STORE(ice_tlan_ctx, tsyn_ena, 1, 90),
+ ICE_CTX_STORE(ice_tlan_ctx, internal_usage_flag, 1, 91),
ICE_CTX_STORE(ice_tlan_ctx, alt_vlan, 1, 92),
ICE_CTX_STORE(ice_tlan_ctx, cpuid, 8, 93),
ICE_CTX_STORE(ice_tlan_ctx, wb_mode, 1, 101),
ICE_CTX_STORE(ice_tlan_ctx, drop_ena, 1, 165),
ICE_CTX_STORE(ice_tlan_ctx, cache_prof_idx, 2, 166),
ICE_CTX_STORE(ice_tlan_ctx, pkt_shaper_prof_idx, 3, 168),
- ICE_CTX_STORE(ice_tlan_ctx, int_q_state, 110, 171),
+ ICE_CTX_STORE(ice_tlan_ctx, int_q_state, 122, 171),
{ 0 }
};
ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_q_shutdown);
if (unloading)
- cmd->driver_unloading = CPU_TO_LE32(ICE_AQC_DRIVER_UNLOADING);
+ cmd->driver_unloading = ICE_AQC_DRIVER_UNLOADING;
return ice_aq_send_cmd(hw, &desc, NULL, 0, NULL);
}
ice_update_phy_type(u64 *phy_type_low, u64 *phy_type_high,
u16 link_speeds_bitmap)
{
- u16 speed = ICE_AQ_LINK_SPEED_UNKNOWN;
u64 pt_high;
u64 pt_low;
int index;
+ u16 speed;
/* We first check with low part of phy_type */
for (index = 0; index <= ICE_PHY_TYPE_LOW_MAX_INDEX; index++) {
*/
enum ice_status ice_update_link_info(struct ice_port_info *pi)
{
- struct ice_aqc_get_phy_caps_data *pcaps;
- struct ice_phy_info *phy_info;
+ struct ice_link_status *li;
enum ice_status status;
- struct ice_hw *hw;
if (!pi)
return ICE_ERR_PARAM;
- hw = pi->hw;
-
- pcaps = (struct ice_aqc_get_phy_caps_data *)
- ice_malloc(hw, sizeof(*pcaps));
- if (!pcaps)
- return ICE_ERR_NO_MEMORY;
+ li = &pi->phy.link_info;
- phy_info = &pi->phy;
status = ice_aq_get_link_info(pi, true, NULL, NULL);
if (status)
- goto out;
+ return status;
- if (phy_info->link_info.link_info & ICE_AQ_MEDIA_AVAILABLE) {
- status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG,
+ if (li->link_info & ICE_AQ_MEDIA_AVAILABLE) {
+ struct ice_aqc_get_phy_caps_data *pcaps;
+ struct ice_hw *hw;
+
+ hw = pi->hw;
+ pcaps = (struct ice_aqc_get_phy_caps_data *)
+ ice_malloc(hw, sizeof(*pcaps));
+ if (!pcaps)
+ return ICE_ERR_NO_MEMORY;
+
+ status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP,
pcaps, NULL);
- if (status)
- goto out;
+ if (status == ICE_SUCCESS)
+ ice_memcpy(li->module_type, &pcaps->module_type,
+ sizeof(li->module_type),
+ ICE_NONDMA_TO_NONDMA);
- ice_memcpy(phy_info->link_info.module_type, &pcaps->module_type,
- sizeof(phy_info->link_info.module_type),
- ICE_NONDMA_TO_NONDMA);
+ ice_free(hw, pcaps);
}
-out:
- ice_free(hw, pcaps);
+
return status;
}
{
switch (fec) {
case ICE_FEC_BASER:
- /* Clear auto FEC and RS bits, and AND BASE-R ability
+ /* Clear RS bits, and AND BASE-R ability
* bits and OR request bits.
*/
- cfg->caps &= ~ICE_AQC_PHY_EN_AUTO_FEC;
cfg->link_fec_opt &= ICE_AQC_PHY_FEC_10G_KR_40G_KR4_EN |
ICE_AQC_PHY_FEC_25G_KR_CLAUSE74_EN;
cfg->link_fec_opt |= ICE_AQC_PHY_FEC_10G_KR_40G_KR4_REQ |
ICE_AQC_PHY_FEC_25G_KR_REQ;
break;
case ICE_FEC_RS:
- /* Clear auto FEC and BASE-R bits, and AND RS ability
+ /* Clear BASE-R bits, and AND RS ability
* bits and OR request bits.
*/
- cfg->caps &= ~ICE_AQC_PHY_EN_AUTO_FEC;
cfg->link_fec_opt &= ICE_AQC_PHY_FEC_25G_RS_CLAUSE91_EN;
cfg->link_fec_opt |= ICE_AQC_PHY_FEC_25G_RS_528_REQ |
ICE_AQC_PHY_FEC_25G_RS_544_REQ;
break;
case ICE_FEC_NONE:
- /* Clear auto FEC and all FEC option bits. */
- cfg->caps &= ~ICE_AQC_PHY_EN_AUTO_FEC;
+ /* Clear all FEC option bits. */
cfg->link_fec_opt &= ~ICE_AQC_PHY_FEC_MASK;
break;
case ICE_FEC_AUTO:
if (!pi || pi->port_state != ICE_SCHED_PORT_STATE_READY)
return ICE_ERR_CFG;
-
if (!num_queues) {
/* if queue is disabled already yet the disable queue command
* has to be sent to complete the VF reset, then call
/**
* ice_stat_update40 - read 40 bit stat from the chip and update stat values
* @hw: ptr to the hardware info
- * @hireg: high 32 bit HW register to read from
- * @loreg: low 32 bit HW register to read from
+ * @reg: offset of 64 bit HW register to read from
* @prev_stat_loaded: bool to specify if previous stats are loaded
* @prev_stat: ptr to previous loaded stat value
* @cur_stat: ptr to current stat value
*/
void
-ice_stat_update40(struct ice_hw *hw, u32 hireg, u32 loreg,
- bool prev_stat_loaded, u64 *prev_stat, u64 *cur_stat)
+ice_stat_update40(struct ice_hw *hw, u32 reg, bool prev_stat_loaded,
+ u64 *prev_stat, u64 *cur_stat)
{
- u64 new_data;
-
- new_data = rd32(hw, loreg);
- new_data |= ((u64)(rd32(hw, hireg) & 0xFFFF)) << 32;
+ u64 new_data = rd64(hw, reg) & (BIT_ULL(40) - 1);
/* device stats are not reset at PFR, they likely will not be zeroed
- * when the driver starts. So save the first values read and use them as
- * offsets to be subtracted from the raw values in order to report stats
- * that count from zero.
+ * when the driver starts. Thus, save the value from the first read
+ * without adding to the statistic value so that we report stats which
+ * count up from zero.
*/
- if (!prev_stat_loaded)
+ if (!prev_stat_loaded) {
*prev_stat = new_data;
+ return;
+ }
+
+ /* Calculate the difference between the new and old values, and then
+ * add it to the software stat value.
+ */
if (new_data >= *prev_stat)
- *cur_stat = new_data - *prev_stat;
+ *cur_stat += new_data - *prev_stat;
else
/* to manage the potential roll-over */
- *cur_stat = (new_data + BIT_ULL(40)) - *prev_stat;
- *cur_stat &= 0xFFFFFFFFFFULL;
+ *cur_stat += (new_data + BIT_ULL(40)) - *prev_stat;
+
+ /* Update the previously stored value to prepare for next read */
+ *prev_stat = new_data;
}
/**
* ice_stat_update32 - read 32 bit stat from the chip and update stat values
* @hw: ptr to the hardware info
- * @reg: HW register to read from
+ * @reg: offset of HW register to read from
* @prev_stat_loaded: bool to specify if previous stats are loaded
* @prev_stat: ptr to previous loaded stat value
* @cur_stat: ptr to current stat value
new_data = rd32(hw, reg);
/* device stats are not reset at PFR, they likely will not be zeroed
- * when the driver starts. So save the first values read and use them as
- * offsets to be subtracted from the raw values in order to report stats
- * that count from zero.
+ * when the driver starts. Thus, save the value from the first read
+ * without adding to the statistic value so that we report stats which
+ * count up from zero.
*/
- if (!prev_stat_loaded)
+ if (!prev_stat_loaded) {
*prev_stat = new_data;
+ return;
+ }
+
+ /* Calculate the difference between the new and old values, and then
+ * add it to the software stat value.
+ */
if (new_data >= *prev_stat)
- *cur_stat = new_data - *prev_stat;
+ *cur_stat += new_data - *prev_stat;
else
/* to manage the potential roll-over */
- *cur_stat = (new_data + BIT_ULL(32)) - *prev_stat;
+ *cur_stat += (new_data + BIT_ULL(32)) - *prev_stat;
+
+ /* Update the previously stored value to prepare for next read */
+ *prev_stat = new_data;
}