STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *sff8472_data);
/**
- * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
- * @hw: pointer to the HW structure
+ * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
*
- * The defaults for 82598 should be in the range of 50us to 50ms,
- * however the hardware default for these parts is 500us to 1ms which is less
- * than the 10ms recommended by the pci-e spec. To address this we need to
- * increase the value to either 10ms to 250ms for capability version 1 config,
- * or 16ms to 55ms for version 2.
+ * The defaults for 82598 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 250ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
**/
void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_init_ops_82598 - Inits func ptrs and MAC type
- * @hw: pointer to hardware structure
+ * ixgbe_init_ops_82598 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
*
- * Initialize the function pointers and assign the MAC type for 82598.
- * Does not touch the hardware.
+ * Initialize the function pointers and assign the MAC type for 82598.
+ * Does not touch the hardware.
**/
s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_init_phy_ops_82598 - PHY/SFP specific init
- * @hw: pointer to hardware structure
+ * ixgbe_init_phy_ops_82598 - PHY/SFP specific init
+ * @hw: pointer to hardware structure
*
- * Initialize any function pointers that were not able to be
- * set during init_shared_code because the PHY/SFP type was
- * not known. Perform the SFP init if necessary.
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
*
**/
s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
}
/**
- * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
- * @hw: pointer to hardware structure
+ * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
*
- * Starts the hardware using the generic start_hw function.
- * Disables relaxed ordering Then set pcie completion timeout
+ * Starts the hardware using the generic start_hw function.
+ * Disables relaxed ordering Then set pcie completion timeout
*
**/
s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
}
/**
- * ixgbe_get_link_capabilities_82598 - Determines link capabilities
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: boolean auto-negotiation value
+ * ixgbe_get_link_capabilities_82598 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
*
- * Determines the link capabilities by reading the AUTOC register.
+ * Determines the link capabilities by reading the AUTOC register.
**/
STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
}
/**
- * ixgbe_get_media_type_82598 - Determines media type
- * @hw: pointer to hardware structure
+ * ixgbe_get_media_type_82598 - Determines media type
+ * @hw: pointer to hardware structure
*
- * Returns the media type (fiber, copper, backplane)
+ * Returns the media type (fiber, copper, backplane)
**/
STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_fc_enable_82598 - Enable flow control
- * @hw: pointer to hardware structure
+ * ixgbe_fc_enable_82598 - Enable flow control
+ * @hw: pointer to hardware structure
*
- * Enable flow control according to the current settings.
+ * Enable flow control according to the current settings.
**/
s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_start_mac_link_82598 - Configures MAC link settings
- * @hw: pointer to hardware structure
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * ixgbe_start_mac_link_82598 - Configures MAC link settings
+ * @hw: pointer to hardware structure
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
- * Configures link settings based on values in the ixgbe_hw struct.
- * Restarts the link. Performs autonegotiation if needed.
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link. Performs autonegotiation if needed.
**/
STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
bool autoneg_wait_to_complete)
}
/**
- * ixgbe_validate_link_ready - Function looks for phy link
- * @hw: pointer to hardware structure
+ * ixgbe_validate_link_ready - Function looks for phy link
+ * @hw: pointer to hardware structure
*
- * Function indicates success when phy link is available. If phy is not ready
- * within 5 seconds of MAC indicating link, the function returns error.
+ * Function indicates success when phy link is available. If phy is not ready
+ * within 5 seconds of MAC indicating link, the function returns error.
**/
STATIC s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_check_mac_link_82598 - Get link/speed status
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true is link is up, false otherwise
- * @link_up_wait_to_complete: bool used to wait for link up or not
+ * ixgbe_check_mac_link_82598 - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @link_up_wait_to_complete: bool used to wait for link up or not
*
- * Reads the links register to determine if link is up and the current speed
+ * Reads the links register to determine if link is up and the current speed
**/
STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed *speed, bool *link_up,
}
/**
- * ixgbe_setup_mac_link_82598 - Set MAC link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * ixgbe_setup_mac_link_82598 - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
- * Set the link speed in the AUTOC register and restarts link.
+ * Set the link speed in the AUTOC register and restarts link.
**/
STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
/**
- * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: true if waiting is needed to complete
+ * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true if waiting is needed to complete
*
- * Sets the link speed in the AUTOC register in the MAC and restarts link.
+ * Sets the link speed in the AUTOC register in the MAC and restarts link.
**/
STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
}
/**
- * ixgbe_reset_hw_82598 - Performs hardware reset
- * @hw: pointer to hardware structure
+ * ixgbe_reset_hw_82598 - Performs hardware reset
+ * @hw: pointer to hardware structure
*
- * Resets the hardware by resetting the transmit and receive units, masks and
- * clears all interrupts, performing a PHY reset, and performing a link (MAC)
- * reset.
+ * Resets the hardware by resetting the transmit and receive units, masks and
+ * clears all interrupts, performing a PHY reset, and performing a link (MAC)
+ * reset.
**/
STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to associate with a VMDq index
- * @vmdq: VMDq set index
+ * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq set index
**/
s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
}
/**
- * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to associate with a VMDq index
- * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
**/
STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
}
/**
- * ixgbe_set_vfta_82598 - Set VLAN filter table
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFTA
- * @vlan_on: boolean flag to turn on/off VLAN in VFTA
- * @vlvf_bypass: boolean flag - unused
+ * ixgbe_set_vfta_82598 - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFTA
+ * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ * @vlvf_bypass: boolean flag - unused
*
- * Turn on/off specified VLAN in the VLAN filter table.
+ * Turn on/off specified VLAN in the VLAN filter table.
**/
s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
bool vlan_on, bool vlvf_bypass)
}
/**
- * ixgbe_clear_vfta_82598 - Clear VLAN filter table
- * @hw: pointer to hardware structure
+ * ixgbe_clear_vfta_82598 - Clear VLAN filter table
+ * @hw: pointer to hardware structure
*
- * Clears the VLAN filer table, and the VMDq index associated with the filter
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
**/
STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to read
- * @val: read value
+ * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
*
- * Performs read operation to Atlas analog register specified.
+ * Performs read operation to Atlas analog register specified.
**/
s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
{
}
/**
- * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
- * @hw: pointer to hardware structure
- * @reg: atlas register to write
- * @val: value to write
+ * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
*
- * Performs write operation to Atlas analog register specified.
+ * Performs write operation to Atlas analog register specified.
**/
s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
{
}
/**
- * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
- * @hw: pointer to hardware structure
- * @dev_addr: address to read from
- * @byte_offset: byte offset to read from dev_addr
- * @eeprom_data: value read
+ * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @dev_addr: address to read from
+ * @byte_offset: byte offset to read from dev_addr
+ * @eeprom_data: value read
*
- * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
**/
STATIC s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
u8 byte_offset, u8 *eeprom_data)
}
/**
- * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to read
- * @eeprom_data: value read
+ * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
*
- * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
**/
s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data)
}
/**
- * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset at address 0xA2
- * @sff8472_data: value read
+ * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset at address 0xA2
+ * @sff8472_data: value read
*
- * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
+ * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
**/
STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *sff8472_data)
}
/**
- * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
- * @hw: pointer to hardware structure
+ * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
+ * @hw: pointer to hardware structure
*
- * Determines physical layer capabilities of the current configuration.
+ * Determines physical layer capabilities of the current configuration.
**/
u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
- * port devices.
- * @hw: pointer to the HW structure
+ * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
+ * port devices.
+ * @hw: pointer to the HW structure
*
- * Calls common function and corrects issue with some single port devices
- * that enable LAN1 but not LAN0.
+ * Calls common function and corrects issue with some single port devices
+ * that enable LAN1 but not LAN0.
**/
void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering
- * @hw: pointer to hardware structure
+ * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering
+ * @hw: pointer to hardware structure
*
**/
void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw)
}
/**
- * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit
- * @hw: pointer to hardware structure
- * @regval: register value to write to RXCTRL
+ * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
*
- * Enables the Rx DMA unit
+ * Enables the Rx DMA unit
**/
s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval)
{