-/*******************************************************************************
-
-Copyright (c) 2001-2015, Intel Corporation
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- 3. Neither the name of the Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-***************************************************************************/
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2020 Intel Corporation
+ */
#include "ixgbe_api.h"
#include "ixgbe_common.h"
}
/**
- * ixgbe_init_shared_code - Initialize the shared code
- * @hw: pointer to hardware structure
+ * ixgbe_init_shared_code - Initialize the shared code
+ * @hw: pointer to hardware structure
*
- * This will assign function pointers and assign the MAC type and PHY code.
- * Does not touch the hardware. This function must be called prior to any
- * other function in the shared code. The ixgbe_hw structure should be
- * memset to 0 prior to calling this function. The following fields in
- * hw structure should be filled in prior to calling this function:
- * hw_addr, back, device_id, vendor_id, subsystem_device_id,
- * subsystem_vendor_id, and revision_id
+ * This will assign function pointers and assign the MAC type and PHY code.
+ * Does not touch the hardware. This function must be called prior to any
+ * other function in the shared code. The ixgbe_hw structure should be
+ * memset to 0 prior to calling this function. The following fields in
+ * hw structure should be filled in prior to calling this function:
+ * hw_addr, back, device_id, vendor_id, subsystem_device_id,
+ * subsystem_vendor_id, and revision_id
**/
s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
{
status = ixgbe_init_ops_X550(hw);
break;
case ixgbe_mac_X550EM_x:
+ status = ixgbe_init_ops_X550EM_x(hw);
+ break;
case ixgbe_mac_X550EM_a:
- status = ixgbe_init_ops_X550EM(hw);
+ status = ixgbe_init_ops_X550EM_a(hw);
break;
case ixgbe_mac_82599_vf:
case ixgbe_mac_X540_vf:
}
/**
- * ixgbe_set_mac_type - Sets MAC type
- * @hw: pointer to the HW structure
+ * ixgbe_set_mac_type - Sets MAC type
+ * @hw: pointer to the HW structure
*
- * This function sets the mac type of the adapter based on the
- * vendor ID and device ID stored in the hw structure.
+ * This function sets the mac type of the adapter based on the
+ * vendor ID and device ID stored in the hw structure.
**/
s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
{
case IXGBE_DEV_ID_82599_QSFP_SF_QP:
case IXGBE_DEV_ID_82599EN_SFP:
case IXGBE_DEV_ID_82599_CX4:
- case IXGBE_DEV_ID_82599_LS:
case IXGBE_DEV_ID_82599_T3_LOM:
hw->mac.type = ixgbe_mac_82599EB;
break;
case IXGBE_DEV_ID_X550EM_X_10G_T:
case IXGBE_DEV_ID_X550EM_X_1G_T:
case IXGBE_DEV_ID_X550EM_X_SFP:
+ case IXGBE_DEV_ID_X550EM_X_XFI:
hw->mac.type = ixgbe_mac_X550EM_x;
hw->mvals = ixgbe_mvals_X550EM_x;
break;
case IXGBE_DEV_ID_X550EM_A_KR:
case IXGBE_DEV_ID_X550EM_A_KR_L:
case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ case IXGBE_DEV_ID_X550EM_A_SGMII:
+ case IXGBE_DEV_ID_X550EM_A_SGMII_L:
case IXGBE_DEV_ID_X550EM_A_1G_T:
case IXGBE_DEV_ID_X550EM_A_1G_T_L:
case IXGBE_DEV_ID_X550EM_A_10G_T:
}
/**
- * ixgbe_init_hw - Initialize the hardware
- * @hw: pointer to hardware structure
+ * ixgbe_init_hw - Initialize the hardware
+ * @hw: pointer to hardware structure
*
- * Initialize the hardware by resetting and then starting the hardware
+ * Initialize the hardware by resetting and then starting the hardware
**/
s32 ixgbe_init_hw(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_reset_hw - Performs a hardware reset
- * @hw: pointer to hardware structure
+ * ixgbe_reset_hw - Performs a hardware reset
+ * @hw: pointer to hardware structure
*
- * Resets the hardware by resetting the transmit and receive units, masks and
- * clears all interrupts, performs a PHY reset, and performs a MAC reset
+ * Resets the hardware by resetting the transmit and receive units, masks and
+ * clears all interrupts, performs a PHY reset, and performs a MAC reset
**/
s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_start_hw - Prepares hardware for Rx/Tx
- * @hw: pointer to hardware structure
+ * ixgbe_start_hw - Prepares hardware for Rx/Tx
+ * @hw: pointer to hardware structure
*
- * Starts the hardware by filling the bus info structure and media type,
- * clears all on chip counters, initializes receive address registers,
- * multicast table, VLAN filter table, calls routine to setup link and
- * flow control settings, and leaves transmit and receive units disabled
- * and uninitialized.
+ * Starts the hardware by filling the bus info structure and media type,
+ * clears all on chip counters, initializes receive address registers,
+ * multicast table, VLAN filter table, calls routine to setup link and
+ * flow control settings, and leaves transmit and receive units disabled
+ * and uninitialized.
**/
s32 ixgbe_start_hw(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering,
- * which is disabled by default in ixgbe_start_hw();
+ * ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering,
+ * which is disabled by default in ixgbe_start_hw();
*
- * @hw: pointer to hardware structure
+ * @hw: pointer to hardware structure
*
- * Enable relaxed ordering;
+ * Enable relaxed ordering;
**/
void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_clear_hw_cntrs - Clear hardware counters
- * @hw: pointer to hardware structure
+ * ixgbe_clear_hw_cntrs - Clear hardware counters
+ * @hw: pointer to hardware structure
*
- * Clears all hardware statistics counters by reading them from the hardware
- * Statistics counters are clear on read.
+ * Clears all hardware statistics counters by reading them from the hardware
+ * Statistics counters are clear on read.
**/
s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_media_type - Get media type
- * @hw: pointer to hardware structure
+ * ixgbe_get_media_type - Get media type
+ * @hw: pointer to hardware structure
*
- * Returns the media type (fiber, copper, backplane)
+ * Returns the media type (fiber, copper, backplane)
**/
enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_mac_addr - Get MAC address
- * @hw: pointer to hardware structure
- * @mac_addr: Adapter MAC address
+ * ixgbe_get_mac_addr - Get MAC address
+ * @hw: pointer to hardware structure
+ * @mac_addr: Adapter MAC address
*
- * Reads the adapter's MAC address from the first Receive Address Register
- * (RAR0) A reset of the adapter must have been performed prior to calling
- * this function in order for the MAC address to have been loaded from the
- * EEPROM into RAR0
+ * Reads the adapter's MAC address from the first Receive Address Register
+ * (RAR0) A reset of the adapter must have been performed prior to calling
+ * this function in order for the MAC address to have been loaded from the
+ * EEPROM into RAR0
**/
s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
{
}
/**
- * ixgbe_get_san_mac_addr - Get SAN MAC address
- * @hw: pointer to hardware structure
- * @san_mac_addr: SAN MAC address
+ * ixgbe_get_san_mac_addr - Get SAN MAC address
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
*
- * Reads the SAN MAC address from the EEPROM, if it's available. This is
- * per-port, so set_lan_id() must be called before reading the addresses.
+ * Reads the SAN MAC address from the EEPROM, if it's available. This is
+ * per-port, so set_lan_id() must be called before reading the addresses.
**/
s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
{
}
/**
- * ixgbe_set_san_mac_addr - Write a SAN MAC address
- * @hw: pointer to hardware structure
- * @san_mac_addr: SAN MAC address
+ * ixgbe_set_san_mac_addr - Write a SAN MAC address
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
*
- * Writes A SAN MAC address to the EEPROM.
+ * Writes A SAN MAC address to the EEPROM.
**/
s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
{
}
/**
- * ixgbe_get_device_caps - Get additional device capabilities
- * @hw: pointer to hardware structure
- * @device_caps: the EEPROM word for device capabilities
+ * ixgbe_get_device_caps - Get additional device capabilities
+ * @hw: pointer to hardware structure
+ * @device_caps: the EEPROM word for device capabilities
*
- * Reads the extra device capabilities from the EEPROM
+ * Reads the extra device capabilities from the EEPROM
**/
s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps)
{
}
/**
- * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
- * @hw: pointer to hardware structure
- * @wwnn_prefix: the alternative WWNN prefix
- * @wwpn_prefix: the alternative WWPN prefix
+ * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
+ * @hw: pointer to hardware structure
+ * @wwnn_prefix: the alternative WWNN prefix
+ * @wwpn_prefix: the alternative WWPN prefix
*
- * This function will read the EEPROM from the alternative SAN MAC address
- * block to check the support for the alternative WWNN/WWPN prefix support.
+ * This function will read the EEPROM from the alternative SAN MAC address
+ * block to check the support for the alternative WWNN/WWPN prefix support.
**/
s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
u16 *wwpn_prefix)
}
/**
- * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM
- * @hw: pointer to hardware structure
- * @bs: the fcoe boot status
+ * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM
+ * @hw: pointer to hardware structure
+ * @bs: the fcoe boot status
*
- * This function will read the FCOE boot status from the iSCSI FCOE block
+ * This function will read the FCOE boot status from the iSCSI FCOE block
**/
s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs)
{
}
/**
- * ixgbe_get_bus_info - Set PCI bus info
- * @hw: pointer to hardware structure
+ * ixgbe_get_bus_info - Set PCI bus info
+ * @hw: pointer to hardware structure
*
- * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
**/
s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_num_of_tx_queues - Get Tx queues
- * @hw: pointer to hardware structure
+ * ixgbe_get_num_of_tx_queues - Get Tx queues
+ * @hw: pointer to hardware structure
*
- * Returns the number of transmit queues for the given adapter.
+ * Returns the number of transmit queues for the given adapter.
**/
u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_num_of_rx_queues - Get Rx queues
- * @hw: pointer to hardware structure
+ * ixgbe_get_num_of_rx_queues - Get Rx queues
+ * @hw: pointer to hardware structure
*
- * Returns the number of receive queues for the given adapter.
+ * Returns the number of receive queues for the given adapter.
**/
u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_stop_adapter - Disable Rx/Tx units
- * @hw: pointer to hardware structure
+ * ixgbe_stop_adapter - Disable Rx/Tx units
+ * @hw: pointer to hardware structure
*
- * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
- * disables transmit and receive units. The adapter_stopped flag is used by
- * the shared code and drivers to determine if the adapter is in a stopped
- * state and should not touch the hardware.
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
**/
s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_read_pba_string - Reads part number string from EEPROM
- * @hw: pointer to hardware structure
- * @pba_num: stores the part number string from the EEPROM
- * @pba_num_size: part number string buffer length
+ * ixgbe_read_pba_string - Reads part number string from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number string from the EEPROM
+ * @pba_num_size: part number string buffer length
*
- * Reads the part number string from the EEPROM.
+ * Reads the part number string from the EEPROM.
**/
s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size)
{
}
/**
- * ixgbe_read_pba_num - Reads part number from EEPROM
- * @hw: pointer to hardware structure
- * @pba_num: stores the part number from the EEPROM
+ * ixgbe_read_pba_num - Reads part number from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number from the EEPROM
*
- * Reads the part number from the EEPROM.
+ * Reads the part number from the EEPROM.
**/
s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num)
{
}
/**
- * ixgbe_identify_phy - Get PHY type
- * @hw: pointer to hardware structure
+ * ixgbe_identify_phy - Get PHY type
+ * @hw: pointer to hardware structure
*
- * Determines the physical layer module found on the current adapter.
+ * Determines the physical layer module found on the current adapter.
**/
s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_reset_phy - Perform a PHY reset
- * @hw: pointer to hardware structure
+ * ixgbe_reset_phy - Perform a PHY reset
+ * @hw: pointer to hardware structure
**/
s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_phy_firmware_version -
- * @hw: pointer to hardware structure
- * @firmware_version: pointer to firmware version
+ * ixgbe_get_phy_firmware_version -
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to firmware version
**/
s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
{
}
/**
- * ixgbe_read_phy_reg - Read PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit address of PHY register to read
- * @phy_data: Pointer to read data from PHY register
+ * ixgbe_read_phy_reg - Read PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: type of device you want to communicate with
+ * @phy_data: Pointer to read data from PHY register
*
- * Reads a value from a specified PHY register
+ * Reads a value from a specified PHY register
**/
s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
u16 *phy_data)
}
/**
- * ixgbe_write_phy_reg - Write PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @phy_data: Data to write to the PHY register
+ * ixgbe_write_phy_reg - Write PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: type of device you want to communicate with
+ * @phy_data: Data to write to the PHY register
*
- * Writes a value to specified PHY register
+ * Writes a value to specified PHY register
**/
s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
u16 phy_data)
}
/**
- * ixgbe_setup_phy_link - Restart PHY autoneg
- * @hw: pointer to hardware structure
+ * ixgbe_setup_phy_link - Restart PHY autoneg
+ * @hw: pointer to hardware structure
*
- * Restart autonegotiation and PHY and waits for completion.
+ * Restart autonegotiation and PHY and waits for completion.
**/
s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_check_phy_link - Determine link and speed status
- * @hw: pointer to hardware structure
+ * ixgbe_check_phy_link - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: link speed
+ * @link_up: true when link is up
*
- * Reads a PHY register to determine if link is up and the current speed for
- * the PHY.
+ * Reads a PHY register to determine if link is up and the current speed for
+ * the PHY.
**/
s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
bool *link_up)
}
/**
- * ixgbe_setup_phy_link_speed - Set auto advertise
- * @hw: pointer to hardware structure
- * @speed: new link speed
+ * ixgbe_setup_phy_link_speed - Set auto advertise
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
- * Sets the auto advertised capabilities
+ * Sets the auto advertised capabilities
**/
s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
}
/**
- * ixgbe_check_link - Get link and speed status
- * @hw: pointer to hardware structure
+ * ixgbe_check_link - Get link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
*
- * Reads the links register to determine if link is up and the current speed
+ * Reads the links register to determine if link is up and the current speed
**/
s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
bool *link_up, bool link_up_wait_to_complete)
}
/**
- * ixgbe_disable_tx_laser - Disable Tx laser
- * @hw: pointer to hardware structure
+ * ixgbe_disable_tx_laser - Disable Tx laser
+ * @hw: pointer to hardware structure
*
- * If the driver needs to disable the laser on SFI optics.
+ * If the driver needs to disable the laser on SFI optics.
**/
void ixgbe_disable_tx_laser(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_enable_tx_laser - Enable Tx laser
- * @hw: pointer to hardware structure
+ * ixgbe_enable_tx_laser - Enable Tx laser
+ * @hw: pointer to hardware structure
*
- * If the driver needs to enable the laser on SFI optics.
+ * If the driver needs to enable the laser on SFI optics.
**/
void ixgbe_enable_tx_laser(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_flap_tx_laser - flap Tx laser to start autotry process
- * @hw: pointer to hardware structure
+ * ixgbe_flap_tx_laser - flap Tx laser to start autotry process
+ * @hw: pointer to hardware structure
*
- * When the driver changes the link speeds that it can support then
- * flap the tx laser to alert the link partner to start autotry
- * process on its end.
+ * When the driver changes the link speeds that it can support then
+ * flap the tx laser to alert the link partner to start autotry
+ * process on its end.
**/
void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_link - Set link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
+ * ixgbe_setup_link - Set link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
- * Configures link settings. Restarts the link.
- * Performs autonegotiation if needed.
+ * Configures link settings. Restarts the link.
+ * Performs autonegotiation if needed.
**/
s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
}
/**
- * ixgbe_setup_mac_link - Set link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
+ * ixgbe_setup_mac_link - Set link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
- * Configures link settings. Restarts the link.
- * Performs autonegotiation if needed.
+ * Configures link settings. Restarts the link.
+ * Performs autonegotiation if needed.
**/
s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
}
/**
- * ixgbe_get_link_capabilities - Returns link capabilities
- * @hw: pointer to hardware structure
+ * ixgbe_get_link_capabilities - Returns link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: link speed capabilities
+ * @autoneg: true when autoneg or autotry is enabled
*
- * Determines the link capabilities of the current configuration.
+ * Determines the link capabilities of the current configuration.
**/
s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
bool *autoneg)
}
/**
- * ixgbe_led_on - Turn on LEDs
- * @hw: pointer to hardware structure
- * @index: led number to turn on
+ * ixgbe_led_on - Turn on LEDs
+ * @hw: pointer to hardware structure
+ * @index: led number to turn on
*
- * Turns on the software controllable LEDs.
+ * Turns on the software controllable LEDs.
**/
s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
{
}
/**
- * ixgbe_led_off - Turn off LEDs
- * @hw: pointer to hardware structure
- * @index: led number to turn off
+ * ixgbe_led_off - Turn off LEDs
+ * @hw: pointer to hardware structure
+ * @index: led number to turn off
*
- * Turns off the software controllable LEDs.
+ * Turns off the software controllable LEDs.
**/
s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
{
}
/**
- * ixgbe_blink_led_start - Blink LEDs
- * @hw: pointer to hardware structure
- * @index: led number to blink
+ * ixgbe_blink_led_start - Blink LEDs
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
*
- * Blink LED based on index.
+ * Blink LED based on index.
**/
s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
{
}
/**
- * ixgbe_blink_led_stop - Stop blinking LEDs
- * @hw: pointer to hardware structure
+ * ixgbe_blink_led_stop - Stop blinking LEDs
+ * @hw: pointer to hardware structure
+ * @index: led number to stop
*
- * Stop blinking LED based on index.
+ * Stop blinking LED based on index.
**/
s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
{
}
/**
- * ixgbe_init_eeprom_params - Initialize EEPROM parameters
- * @hw: pointer to hardware structure
+ * ixgbe_init_eeprom_params - Initialize EEPROM parameters
+ * @hw: pointer to hardware structure
*
- * Initializes the EEPROM parameters ixgbe_eeprom_info within the
- * ixgbe_hw struct in order to set up EEPROM access.
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
**/
s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
{
/**
- * ixgbe_write_eeprom - Write word to EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @data: 16 bit word to be written to the EEPROM
+ * ixgbe_write_eeprom - Write word to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word to be written to the EEPROM
*
- * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
- * called after this function, the EEPROM will most likely contain an
- * invalid checksum.
+ * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
+ * called after this function, the EEPROM will most likely contain an
+ * invalid checksum.
**/
s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
{
}
/**
- * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @data: 16 bit word(s) to be written to the EEPROM
- * @words: number of words
+ * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word(s) to be written to the EEPROM
+ * @words: number of words
*
- * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
- * called after this function, the EEPROM will most likely contain an
- * invalid checksum.
+ * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
+ * called after this function, the EEPROM will most likely contain an
+ * invalid checksum.
**/
s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words,
u16 *data)
}
/**
- * ixgbe_read_eeprom - Read word from EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @data: read 16 bit value from EEPROM
+ * ixgbe_read_eeprom - Read word from EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
*
- * Reads 16 bit value from EEPROM
+ * Reads 16 bit value from EEPROM
**/
s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
}
/**
- * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @data: read 16 bit word(s) from EEPROM
- * @words: number of words
+ * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit word(s) from EEPROM
+ * @words: number of words
*
- * Reads 16 bit word(s) from EEPROM
+ * Reads 16 bit word(s) from EEPROM
**/
s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
}
/**
- * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
- * @hw: pointer to hardware structure
- * @checksum_val: calculated checksum
+ * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
*
- * Performs checksum calculation and validates the EEPROM checksum
+ * Performs checksum calculation and validates the EEPROM checksum
**/
s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
{
}
/**
- * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
- * @hw: pointer to hardware structure
+ * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
+ * @hw: pointer to hardware structure
**/
s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_insert_mac_addr - Find a RAR for this mac address
- * @hw: pointer to hardware structure
- * @addr: Address to put into receive address register
- * @vmdq: VMDq pool to assign
+ * ixgbe_insert_mac_addr - Find a RAR for this mac address
+ * @hw: pointer to hardware structure
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq pool to assign
*
- * Puts an ethernet address into a receive address register, or
- * finds the rar that it is aleady in; adds to the pool list
+ * Puts an ethernet address into a receive address register, or
+ * finds the rar that it is already in; adds to the pool list
**/
s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
{
}
/**
- * ixgbe_set_rar - Set Rx address register
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
- * @addr: Address to put into receive address register
- * @vmdq: VMDq "set"
- * @enable_addr: set flag that address is active
+ * ixgbe_set_rar - Set Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set"
+ * @enable_addr: set flag that address is active
*
- * Puts an ethernet address into a receive address register.
+ * Puts an ethernet address into a receive address register.
**/
s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr)
}
/**
- * ixgbe_clear_rar - Clear Rx address register
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
+ * ixgbe_clear_rar - Clear Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
*
- * Puts an ethernet address into a receive address register.
+ * Puts an ethernet address into a receive address register.
**/
s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index)
{
}
/**
- * ixgbe_set_vmdq - Associate a VMDq index with a receive address
- * @hw: pointer to hardware structure
- * @rar: receive address register index to associate with VMDq index
- * @vmdq: VMDq set or pool index
+ * ixgbe_set_vmdq - Associate a VMDq index with a receive address
+ * @hw: pointer to hardware structure
+ * @rar: receive address register index to associate with VMDq index
+ * @vmdq: VMDq set or pool index
**/
s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
}
/**
- * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
- * @hw: pointer to hardware structure
- * @vmdq: VMDq default pool index
+ * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
+ * @hw: pointer to hardware structure
+ * @vmdq: VMDq default pool index
**/
s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq)
{
}
/**
- * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
- * @hw: pointer to hardware structure
- * @rar: receive address register index to disassociate with VMDq index
- * @vmdq: VMDq set or pool index
+ * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
+ * @hw: pointer to hardware structure
+ * @rar: receive address register index to disassociate with VMDq index
+ * @vmdq: VMDq set or pool index
**/
s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
}
/**
- * ixgbe_init_rx_addrs - Initializes receive address filters.
- * @hw: pointer to hardware structure
+ * ixgbe_init_rx_addrs - Initializes receive address filters.
+ * @hw: pointer to hardware structure
*
- * Places the MAC address in receive address register 0 and clears the rest
- * of the receive address registers. Clears the multicast table. Assumes
- * the receiver is in reset when the routine is called.
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
**/
s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
- * @hw: pointer to hardware structure
+ * ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
+ * @hw: pointer to hardware structure
**/
u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
- * @hw: pointer to hardware structure
- * @addr_list: the list of new multicast addresses
- * @addr_count: number of addresses
- * @func: iterator function to walk the multicast address list
+ * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
+ * @hw: pointer to hardware structure
+ * @addr_list: the list of new multicast addresses
+ * @addr_count: number of addresses
+ * @func: iterator function to walk the multicast address list
*
- * The given list replaces any existing list. Clears the secondary addrs from
- * receive address registers. Uses unused receive address registers for the
- * first secondary addresses, and falls back to promiscuous mode as needed.
+ * The given list replaces any existing list. Clears the secondary addrs from
+ * receive address registers. Uses unused receive address registers for the
+ * first secondary addresses, and falls back to promiscuous mode as needed.
**/
s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
u32 addr_count, ixgbe_mc_addr_itr func)
}
/**
- * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
- * @hw: pointer to hardware structure
- * @mc_addr_list: the list of new multicast addresses
- * @mc_addr_count: number of addresses
- * @func: iterator function to walk the multicast address list
+ * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
+ * @hw: pointer to hardware structure
+ * @mc_addr_list: the list of new multicast addresses
+ * @mc_addr_count: number of addresses
+ * @func: iterator function to walk the multicast address list
+ * @clear: flag, when set clears the table beforehand
*
- * The given list replaces any existing list. Clears the MC addrs from receive
- * address registers and the multicast table. Uses unused receive address
- * registers for the first multicast addresses, and hashes the rest into the
- * multicast table.
+ * The given list replaces any existing list. Clears the MC addrs from receive
+ * address registers and the multicast table. Uses unused receive address
+ * registers for the first multicast addresses, and hashes the rest into the
+ * multicast table.
**/
s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count, ixgbe_mc_addr_itr func,
}
/**
- * ixgbe_enable_mc - Enable multicast address in RAR
- * @hw: pointer to hardware structure
+ * ixgbe_enable_mc - Enable multicast address in RAR
+ * @hw: pointer to hardware structure
*
- * Enables multicast address in RAR and the use of the multicast hash table.
+ * Enables multicast address in RAR and the use of the multicast hash table.
**/
s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_disable_mc - Disable multicast address in RAR
- * @hw: pointer to hardware structure
+ * ixgbe_disable_mc - Disable multicast address in RAR
+ * @hw: pointer to hardware structure
*
- * Disables multicast address in RAR and the use of the multicast hash table.
+ * Disables multicast address in RAR and the use of the multicast hash table.
**/
s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_clear_vfta - Clear VLAN filter table
- * @hw: pointer to hardware structure
+ * ixgbe_clear_vfta - Clear VLAN filter table
+ * @hw: pointer to hardware structure
*
- * Clears the VLAN filer table, and the VMDq index associated with the filter
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
**/
s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_set_vfta - Set VLAN filter table
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFTA
- * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ * ixgbe_set_vfta - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ * @vlan_on: boolean flag to turn on/off VLAN
+ * @vlvf_bypass: boolean flag indicating updating the default pool is okay
*
- * Turn on/off specified VLAN in the VLAN filter table.
+ * Turn on/off specified VLAN in the VLAN filter table.
**/
-s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
+ bool vlvf_bypass)
{
return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
- vlan_on), IXGBE_NOT_IMPLEMENTED);
+ vlan_on, vlvf_bypass), IXGBE_NOT_IMPLEMENTED);
}
/**
- * ixgbe_set_vlvf - Set VLAN Pool Filter
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFVFB
- * @vlan_on: boolean flag to turn on/off VLAN in VFVF
- * @vfta_changed: pointer to boolean flag which indicates whether VFTA
- * should be changed
+ * ixgbe_set_vlvf - Set VLAN Pool Filter
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VLVF
+ * @vfta_delta: pointer to the difference between the current value of VFTA
+ * and the desired value
+ * @vfta: the desired value of the VFTA
+ * @vlvf_bypass: boolean flag indicating updating the default pool is okay
*
- * Turn on/off specified bit in VLVF table.
+ * Turn on/off specified bit in VLVF table.
**/
s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
- bool *vfta_changed)
+ u32 *vfta_delta, u32 vfta, bool vlvf_bypass)
{
return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
- vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED);
+ vlan_on, vfta_delta, vfta, vlvf_bypass),
+ IXGBE_NOT_IMPLEMENTED);
}
/**
- * ixgbe_fc_enable - Enable flow control
- * @hw: pointer to hardware structure
+ * ixgbe_fc_enable - Enable flow control
+ * @hw: pointer to hardware structure
*
- * Configures the flow control settings based on SW configuration.
+ * Configures the flow control settings based on SW configuration.
**/
s32 ixgbe_fc_enable(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_fc - Set up flow control
- * @hw: pointer to hardware structure
+ * ixgbe_setup_fc - Set up flow control
+ * @hw: pointer to hardware structure
*
- * Called at init time to set up flow control.
+ * Called at init time to set up flow control.
**/
s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
{
* @min: driver minor number to be sent to firmware
* @build: driver build number to be sent to firmware
* @ver: driver version number to be sent to firmware
+ * @len: length of driver_ver string
+ * @driver_ver: driver string
**/
s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
- u8 ver)
+ u8 ver, u16 len, char *driver_ver)
{
return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
- build, ver), IXGBE_NOT_IMPLEMENTED);
+ build, ver, len, driver_ver),
+ IXGBE_NOT_IMPLEMENTED);
}
/**
- * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
- * @hw: pointer to hardware structure
+ * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
*
- * Updates the temperatures in mac.thermal_sensor_data
+ * Updates the temperatures in mac.thermal_sensor_data
**/
s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
- * @hw: pointer to hardware structure
+ * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
*
- * Inits the thermal sensor thresholds according to the NVM map
+ * Inits the thermal sensor thresholds according to the NVM map
**/
s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_dmac_config - Configure DMA Coalescing registers.
- * @hw: pointer to hardware structure
+ * ixgbe_dmac_config - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
*
- * Configure DMA coalescing. If enabling dmac, dmac is activated.
- * When disabling dmac, dmac enable dmac bit is cleared.
+ * Configure DMA coalescing. If enabling dmac, dmac is activated.
+ * When disabling dmac, dmac enable dmac bit is cleared.
**/
s32 ixgbe_dmac_config(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers.
- * @hw: pointer to hardware structure
+ * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
*
- * Disables dmac, updates per TC settings, and then enable dmac.
+ * Disables dmac, updates per TC settings, and then enable dmac.
**/
s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers.
- * @hw: pointer to hardware structure
+ * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
*
- * Configure DMA coalescing threshold per TC and set high priority bit for
- * FCOE TC. The dmac enable bit must be cleared before configuring.
+ * Configure DMA coalescing threshold per TC and set high priority bit for
+ * FCOE TC. The dmac enable bit must be cleared before configuring.
**/
s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_eee - Enable/disable EEE support
- * @hw: pointer to the HW structure
- * @enable_eee: boolean flag to enable EEE
+ * ixgbe_setup_eee - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @enable_eee: boolean flag to enable EEE
*
- * Enable/disable EEE based on enable_ee flag.
- * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
- * are modified.
+ * Enable/disable EEE based on enable_ee flag.
+ * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
+ * are modified.
*
**/
s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee)
/**
* ixgbe_set_source_address_pruning - Enable/Disable source address pruning
* @hw: pointer to hardware structure
- * @enbale: enable or disable source address pruning
+ * @enable: enable or disable source address pruning
* @pool: Rx pool - Rx pool to toggle source address pruning
**/
void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
}
/**
- * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
- * @hw: pointer to hardware structure
- * @enable: enable or disable switch for Ethertype anti-spoofing
- * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for Ethertype anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
*
**/
void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
}
/**
- * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit address of PHY register to read
- * @device_type: type of device you want to communicate with
- * @phy_data: Pointer to read data from PHY register
+ * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: type of device you want to communicate with
+ * @phy_data: Pointer to read data from PHY register
*
- * Reads a value from a specified PHY register
+ * Reads a value from a specified PHY register
**/
s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u32 *phy_data)
}
/**
- * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: type of device you want to communicate with
- * @phy_data: Data to write to the PHY register
+ * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: type of device you want to communicate with
+ * @phy_data: Data to write to the PHY register
*
- * Writes a value to specified PHY register
+ * Writes a value to specified PHY register
**/
s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u32 phy_data)
}
/**
- * ixgbe_disable_mdd - Disable malicious driver detection
- * @hw: pointer to hardware structure
+ * ixgbe_disable_mdd - Disable malicious driver detection
+ * @hw: pointer to hardware structure
*
**/
void ixgbe_disable_mdd(struct ixgbe_hw *hw)
}
/**
- * ixgbe_enable_mdd - Enable malicious driver detection
- * @hw: pointer to hardware structure
+ * ixgbe_enable_mdd - Enable malicious driver detection
+ * @hw: pointer to hardware structure
*
**/
void ixgbe_enable_mdd(struct ixgbe_hw *hw)
}
/**
- * ixgbe_mdd_event - Handle malicious driver detection event
- * @hw: pointer to hardware structure
- * @vf_bitmap: vf bitmap of malicious vfs
+ * ixgbe_mdd_event - Handle malicious driver detection event
+ * @hw: pointer to hardware structure
+ * @vf_bitmap: vf bitmap of malicious vfs
*
**/
void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap)
}
/**
- * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver
- * detection event
- * @hw: pointer to hardware structure
- * @vf: vf index
+ * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver
+ * detection event
+ * @hw: pointer to hardware structure
+ * @vf: vf index
*
**/
void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf)
}
/**
- * ixgbe_enter_lplu - Transition to low power states
- * @hw: pointer to hardware structure
+ * ixgbe_fw_recovery_mode - Check if in FW NVM recovery mode
+ * @hw: pointer to hardware structure
+ *
+ **/
+bool ixgbe_fw_recovery_mode(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.fw_recovery_mode)
+ return hw->mac.ops.fw_recovery_mode(hw);
+ return false;
+}
+
+/**
+ * ixgbe_enter_lplu - Transition to low power states
+ * @hw: pointer to hardware structure
*
* Configures Low Power Link Up on transition to low power states
* (from D0 to non-D0).
}
/**
- * ixgbe_read_analog_reg8 - Reads 8 bit analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to read
- * @val: read value
+ * ixgbe_read_analog_reg8 - Reads 8 bit analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
*
- * Performs write operation to analog register specified.
+ * Performs write operation to analog register specified.
**/
s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
{
}
/**
- * ixgbe_write_analog_reg8 - Writes 8 bit analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to write
- * @val: value to write
+ * ixgbe_write_analog_reg8 - Writes 8 bit analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to write
+ * @val: value to write
*
- * Performs write operation to Atlas analog register specified.
+ * Performs write operation to Atlas analog register specified.
**/
s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
{
}
/**
- * ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
- * @hw: pointer to hardware structure
+ * ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
+ * @hw: pointer to hardware structure
*
- * Initializes the Unicast Table Arrays to zero on device load. This
- * is part of the Rx init addr execution path.
+ * Initializes the Unicast Table Arrays to zero on device load. This
+ * is part of the Rx init addr execution path.
**/
s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to read
- * @dev_addr: I2C bus address to read from
- * @data: value read
+ * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: I2C bus address to read from
+ * @data: value read
*
- * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
**/
s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
u8 *data)
}
/**
- * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to read
- * @dev_addr: I2C bus address to read from
- * @data: value read
+ * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: I2C bus address to read from
+ * @data: value read
*
- * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
**/
s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data)
}
/**
- * ixgbe_write_i2c_byte - Writes 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to write
- * @dev_addr: I2C bus address to write to
- * @data: value to write
+ * ixgbe_write_i2c_byte - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: I2C bus address to write to
+ * @data: value to write
*
- * Performs byte write operation to SFP module's EEPROM over I2C interface
- * at a specified device address.
+ * Performs byte write operation to SFP module's EEPROM over I2C interface
+ * at a specified device address.
**/
s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
u8 data)
}
/**
- * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to write
- * @dev_addr: I2C bus address to write to
- * @data: value to write
+ * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: I2C bus address to write to
+ * @data: value to write
*
- * Performs byte write operation to SFP module's EEPROM over I2C interface
- * at a specified device address.
+ * Performs byte write operation to SFP module's EEPROM over I2C interface
+ * at a specified device address.
**/
s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 data)
}
/**
- * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to write
- * @eeprom_data: value to write
+ * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to write
+ * @eeprom_data: value to write
*
- * Performs byte write operation to SFP module's EEPROM over I2C interface.
+ * Performs byte write operation to SFP module's EEPROM over I2C interface.
**/
s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw,
u8 byte_offset, u8 eeprom_data)
}
/**
- * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to read
- * @eeprom_data: value read
+ * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
*
- * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
**/
s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data)
{
}
/**
- * ixgbe_get_supported_physical_layer - Returns physical layer type
- * @hw: pointer to hardware structure
+ * ixgbe_get_supported_physical_layer - Returns physical layer type
+ * @hw: pointer to hardware structure
*
- * Determines physical layer capabilities of the current configuration.
+ * Determines physical layer capabilities of the current configuration.
**/
-u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
+u64 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
{
return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
(hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
}
/**
- * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
- * @hw: pointer to hardware structure
- * @regval: bitfield to write to the Rx DMA register
+ * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
+ * @hw: pointer to hardware structure
+ * @regval: bitfield to write to the Rx DMA register
*
- * Enables the Rx DMA unit of the device.
+ * Enables the Rx DMA unit of the device.
**/
s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval)
{
}
/**
- * ixgbe_disable_sec_rx_path - Stops the receive data path
- * @hw: pointer to hardware structure
+ * ixgbe_disable_sec_rx_path - Stops the receive data path
+ * @hw: pointer to hardware structure
*
- * Stops the receive data path.
+ * Stops the receive data path.
**/
s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_enable_sec_rx_path - Enables the receive data path
- * @hw: pointer to hardware structure
+ * ixgbe_enable_sec_rx_path - Enables the receive data path
+ * @hw: pointer to hardware structure
*
- * Enables the receive data path.
+ * Enables the receive data path.
**/
s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to acquire
+ * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
*
- * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
- * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
**/
s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_release_swfw_semaphore - Release SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to release
+ * ixgbe_release_swfw_semaphore - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
*
- * Releases the SWFW semaphore through SW_FW_SYNC register for the specified
- * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ * Releases the SWFW semaphore through SW_FW_SYNC register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
**/
void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
{
hw->mac.ops.release_swfw_sync(hw, mask);
}
+/**
+ * ixgbe_init_swfw_semaphore - Clean up SWFW semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Attempts to acquire the SWFW semaphore through SW_FW_SYNC register.
+ * Regardless of whether is succeeds or not it then release the semaphore.
+ * This is function is called to recover from catastrophic failures that
+ * may have left the semaphore locked.
+ **/
+void ixgbe_init_swfw_semaphore(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.init_swfw_sync)
+ hw->mac.ops.init_swfw_sync(hw);
+}
+
void ixgbe_disable_rx(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_set_rate_select_speed - Set module link speed
- * @hw: pointer to hardware structure
- * @speed: link speed to set
+ * ixgbe_set_rate_select_speed - Set module link speed
+ * @hw: pointer to hardware structure
+ * @speed: link speed to set
*
- * Set module link speed via the rate select.
+ * Set module link speed via the rate select.
*/
void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
{