switch (hw->phy.media_type) {
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- /* if link is down, assume supported */
- if (link_up)
- supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ /* flow control autoneg black list */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ case IXGBE_DEV_ID_X550EM_A_QSFP:
+ case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+ supported = false;
+ break;
+ default:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
true : false;
- else
- supported = true;
+ else
+ supported = true;
+ }
+
break;
case ixgbe_media_type_backplane:
supported = true;
case IXGBE_DEV_ID_X550T1:
case IXGBE_DEV_ID_X550EM_X_10G_T:
case IXGBE_DEV_ID_X550EM_A_10G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T_L:
supported = true;
break;
default:
break;
}
- ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
- "Device %x does not support flow control autoneg",
- hw->device_id);
+ if (!supported)
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Device %x does not support flow control autoneg",
+ hw->device_id);
return supported;
}
/* Setup flow control */
ret_val = ixgbe_setup_fc(hw);
- if (ret_val != IXGBE_SUCCESS)
- goto out;
+ if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED)
+ return ret_val;
/* Cache bit indicating need for crosstalk fix */
switch (hw->mac.type) {
/* Clear adapter stopped flag */
hw->adapter_stopped = false;
-out:
- return ret_val;
+ return IXGBE_SUCCESS;
}
/**
}
/**
- * ixgbe_host_interface_command - Issue command to manageability block
+ * ixgbe_hic_unlocked - Issue command to manageability block unlocked
* @hw: pointer to the HW structure
- * @buffer: contains the command to write and where the return status will
- * be placed
+ * @buffer: command to write and where the return status will be placed
* @length: length of buffer, must be multiple of 4 bytes
* @timeout: time in ms to wait for command completion
- * @return_data: read and return data from the buffer (true) or not (false)
- * Needed because FW structures are big endian and decoding of
- * these fields can be 8 bit or 16 bit based on command. Decoding
- * is not easily understood without making a table of commands.
- * So we will leave this up to the caller to read back the data
- * in these cases.
*
* Communicates with the manageability block. On success return IXGBE_SUCCESS
* else returns semaphore error when encountering an error acquiring
* semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ *
+ * This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held
+ * by the caller.
**/
-s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
- u32 length, u32 timeout, bool return_data)
+s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length,
+ u32 timeout)
{
- u32 hicr, i, bi, fwsts;
- u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
- u16 buf_len;
+ u32 hicr, i, fwsts;
u16 dword_len;
- s32 status;
- DEBUGFUNC("ixgbe_host_interface_command");
+ DEBUGFUNC("ixgbe_hic_unlocked");
- if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
- /* Take management host interface semaphore */
- status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
-
- if (status)
- return status;
/* Set bit 9 of FWSTS clearing FW reset indication */
fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
/* Check that the host interface is enabled. */
hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
- if ((hicr & IXGBE_HICR_EN) == 0) {
+ if (!(hicr & IXGBE_HICR_EN)) {
DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
- status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto rel_out;
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
/* Calculate length in DWORDs. We must be DWORD aligned */
- if ((length % (sizeof(u32))) != 0) {
+ if (length % sizeof(u32)) {
DEBUGOUT("Buffer length failure, not aligned to dword");
- status = IXGBE_ERR_INVALID_ARGUMENT;
- goto rel_out;
+ return IXGBE_ERR_INVALID_ARGUMENT;
}
dword_len = length >> 2;
}
/* Check command completion */
- if ((timeout != 0 && i == timeout) ||
+ if ((timeout && i == timeout) ||
!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
ERROR_REPORT1(IXGBE_ERROR_CAUTION,
"Command has failed with no status valid.\n");
- status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto rel_out;
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_host_interface_command - Issue command to manageability block
+ * @hw: pointer to the HW structure
+ * @buffer: contains the command to write and where the return status will
+ * be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ * @return_data: read and return data from the buffer (true) or not (false)
+ * Needed because FW structures are big endian and decoding of
+ * these fields can be 8 bit or 16 bit based on command. Decoding
+ * is not easily understood without making a table of commands.
+ * So we will leave this up to the caller to read back the data
+ * in these cases.
+ *
+ * Communicates with the manageability block. On success return IXGBE_SUCCESS
+ * else returns semaphore error when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+ u32 length, u32 timeout, bool return_data)
+{
+ u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+ u16 dword_len;
+ u16 buf_len;
+ s32 status;
+ u32 bi;
+
+ DEBUGFUNC("ixgbe_host_interface_command");
+
+ if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
+ /* Take management host interface semaphore */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+ if (status)
+ return status;
+
+ status = ixgbe_hic_unlocked(hw, buffer, length, timeout);
+ if (status)
+ goto rel_out;
+
if (!return_data)
goto rel_out;
/* If there is any thing in data position pull it in */
buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
- if (buf_len == 0)
+ if (!buf_len)
goto rel_out;
if (length < buf_len + hdr_size) {
speedcnt++;
highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
- /* If we already have link at this speed, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, false);
- if (status != IXGBE_SUCCESS)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
- goto out;
-
/* Set the module link speed */
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber:
if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
- /* If we already have link at this speed, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, false);
- if (status != IXGBE_SUCCESS)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
- goto out;
-
/* Set the module link speed */
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber: