mac->ops.led_off = ixgbe_led_off_generic;
mac->ops.blink_led_start = ixgbe_blink_led_start_generic;
mac->ops.blink_led_stop = ixgbe_blink_led_stop_generic;
+ mac->ops.init_led_link_act = ixgbe_init_led_link_act_generic;
/* RAR, Multicast, VLAN */
mac->ops.set_rar = ixgbe_set_rar_generic;
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- /* if link is down, assume supported */
- if (link_up)
- supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ /* flow control autoneg black list */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ case IXGBE_DEV_ID_X550EM_A_QSFP:
+ case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+ supported = false;
+ break;
+ default:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
true : false;
- else
- supported = true;
+ else
+ supported = true;
+ }
+
break;
case ixgbe_media_type_backplane:
supported = true;
case IXGBE_DEV_ID_X550T1:
case IXGBE_DEV_ID_X550EM_X_10G_T:
case IXGBE_DEV_ID_X550EM_A_10G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T_L:
supported = true;
break;
default:
break;
}
- ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
- "Device %x does not support flow control autoneg",
- hw->device_id);
+ if (!supported)
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Device %x does not support flow control autoneg",
+ hw->device_id);
return supported;
}
{
s32 ret_val;
u32 ctrl_ext;
+ u16 device_caps;
DEBUGFUNC("ixgbe_start_hw_generic");
/* Setup flow control */
ret_val = ixgbe_setup_fc(hw);
- if (ret_val != IXGBE_SUCCESS)
- goto out;
+ if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED) {
+ DEBUGOUT1("Flow control setup failed, returning %d\n", ret_val);
+ return ret_val;
+ }
+
+ /* Cache bit indicating need for crosstalk fix */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X550EM_x:
+ case ixgbe_mac_X550EM_a:
+ hw->mac.ops.get_device_caps(hw, &device_caps);
+ if (device_caps & IXGBE_DEVICE_CAPS_NO_CROSSTALK_WR)
+ hw->need_crosstalk_fix = false;
+ else
+ hw->need_crosstalk_fix = true;
+ break;
+ default:
+ hw->need_crosstalk_fix = false;
+ break;
+ }
/* Clear adapter stopped flag */
hw->adapter_stopped = false;
-out:
- return ret_val;
+ return IXGBE_SUCCESS;
}
/**
/* Reset the hardware */
status = hw->mac.ops.reset_hw(hw);
- if (status == IXGBE_SUCCESS) {
+ if (status == IXGBE_SUCCESS || status == IXGBE_ERR_SFP_NOT_PRESENT) {
/* Start the HW */
status = hw->mac.ops.start_hw(hw);
}
+ /* Initialize the LED link active for LED blink support */
+ hw->mac.ops.init_led_link_act(hw);
+
+ if (status != IXGBE_SUCCESS)
+ DEBUGOUT1("Failed to initialize HW, STATUS = %d\n", status);
+
return status;
}
if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) {
hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4);
bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >>
- IXGBE_EE_CTRL_4_INST_ID_SHIFT;
+ IXGBE_EE_CTRL_4_INST_ID_SHIFT;
}
}
return ixgbe_disable_pcie_master(hw);
}
+/**
+ * ixgbe_init_led_link_act_generic - Store the LED index link/activity.
+ * @hw: pointer to hardware structure
+ *
+ * Store the index for the link active LED. This will be used to support
+ * blinking the LED.
+ **/
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ u32 led_reg, led_mode;
+ u8 i;
+
+ led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /* Get LED link active from the LEDCTL register */
+ for (i = 0; i < 4; i++) {
+ led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i);
+
+ if ((led_mode & IXGBE_LED_MODE_MASK_BASE) ==
+ IXGBE_LED_LINK_ACTIVE) {
+ mac->led_link_act = i;
+ return IXGBE_SUCCESS;
+ }
+ }
+
+ /*
+ * If LEDCTL register does not have the LED link active set, then use
+ * known MAC defaults.
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550EM_a:
+ case ixgbe_mac_X550EM_x:
+ mac->led_link_act = 1;
+ break;
+ default:
+ mac->led_link_act = 2;
+ }
+ return IXGBE_SUCCESS;
+}
+
/**
* ixgbe_led_on_generic - Turns on the software controllable LEDs.
* @hw: pointer to hardware structure
DEBUGFUNC("ixgbe_led_on_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/* To turn on the LED, set mode to ON. */
led_reg &= ~IXGBE_LED_MODE_MASK(index);
led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
DEBUGFUNC("ixgbe_led_off_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/* To turn off the LED, set mode to OFF. */
led_reg &= ~IXGBE_LED_MODE_MASK(index);
led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
* advertised settings
**/
s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
- u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+ u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
{
if ((!(adv_reg)) || (!(lp_reg))) {
ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED,
**/
s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw)
{
- int secrxreg;
+ u32 secrxreg;
DEBUGFUNC("ixgbe_enable_sec_rx_path_generic");
DEBUGFUNC("ixgbe_blink_led_start_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/*
* Link must be up to auto-blink the LEDs;
* Force it if link is down.
DEBUGFUNC("ixgbe_blink_led_stop_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
+
ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
if (ret_val != IXGBE_SUCCESS)
goto out;
}
/* was that the last pool using this rar? */
- if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+ if (mpsar_lo == 0 && mpsar_hi == 0 &&
+ rar != 0 && rar != hw->mac.san_mac_rar_index)
hw->mac.ops.clear_rar(hw, rar);
done:
return IXGBE_SUCCESS;
vfta_delta = 1 << (vlan % 32);
vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx));
- /* vfta_delta represents the difference between the current value
+ /*
+ * vfta_delta represents the difference between the current value
* of vfta and the value we want in the register. Since the diff
* is an XOR mask we can just update the vfta using an XOR
*/
* @vind: VMDq output index that maps queue to VLAN id in VLVFB
* @vlan_on: boolean flag to turn on/off VLAN in VLVF
* @vfta_delta: pointer to the difference between the current value of VFTA
- * and the desired value
+ * and the desired value
* @vfta: the desired value of the VFTA
* @vlvf_bypass: boolean flag indicating updating default pool is okay
*
*/
if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE))
return IXGBE_SUCCESS;
+
vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass);
if (vlvf_index < 0)
return vlvf_index;
return IXGBE_SUCCESS;
}
+
/* If there are still bits set in the VLVFB registers
* for the VLAN ID indicated we need to see if the
* caller is requesting that we clear the VFTA entry bit.
return IXGBE_SUCCESS;
}
+/**
+ * ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix
+ * @hw: pointer to hardware structure
+ *
+ * Contains the logic to identify if we need to verify link for the
+ * crosstalk fix
+ **/
+static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw)
+{
+
+ /* Does FW say we need the fix */
+ if (!hw->need_crosstalk_fix)
+ return false;
+
+ /* Only consider SFP+ PHYs i.e. media type fiber */
+ switch (hw->mac.ops.get_media_type(hw)) {
+ case ixgbe_media_type_fiber:
+ case ixgbe_media_type_fiber_qsfp:
+ break;
+ default:
+ return false;
+ }
+
+ return true;
+}
+
/**
* ixgbe_check_mac_link_generic - Determine link and speed status
* @hw: pointer to hardware structure
DEBUGFUNC("ixgbe_check_mac_link_generic");
+ /* If Crosstalk fix enabled do the sanity check of making sure
+ * the SFP+ cage is full.
+ */
+ if (ixgbe_need_crosstalk_fix(hw)) {
+ u32 sfp_cage_full;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+ IXGBE_ESDP_SDP2;
+ break;
+ case ixgbe_mac_X550EM_x:
+ case ixgbe_mac_X550EM_a:
+ sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+ IXGBE_ESDP_SDP0;
+ break;
+ default:
+ /* sanity check - No SFP+ devices here */
+ sfp_cage_full = false;
+ break;
+ }
+
+ if (!sfp_cage_full) {
+ *link_up = false;
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ return IXGBE_SUCCESS;
+ }
+ }
+
/* clear the old state */
links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
break;
case IXGBE_LINKS_SPEED_100_82599:
*speed = IXGBE_LINK_SPEED_100_FULL;
- if (hw->mac.type >= ixgbe_mac_X550) {
+ if (hw->mac.type == ixgbe_mac_X550) {
if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
*speed = IXGBE_LINK_SPEED_5GB_FULL;
}
break;
+ case IXGBE_LINKS_SPEED_10_X550EM_A:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T ||
+ hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) {
+ *speed = IXGBE_LINK_SPEED_10_FULL;
+ }
+ break;
default:
*speed = IXGBE_LINK_SPEED_UNKNOWN;
}
}
/**
- * ixgbe_host_interface_command - Issue command to manageability block
+ * ixgbe_hic_unlocked - Issue command to manageability block unlocked
* @hw: pointer to the HW structure
- * @buffer: contains the command to write and where the return status will
- * be placed
+ * @buffer: command to write and where the return status will be placed
* @length: length of buffer, must be multiple of 4 bytes
* @timeout: time in ms to wait for command completion
- * @return_data: read and return data from the buffer (true) or not (false)
- * Needed because FW structures are big endian and decoding of
- * these fields can be 8 bit or 16 bit based on command. Decoding
- * is not easily understood without making a table of commands.
- * So we will leave this up to the caller to read back the data
- * in these cases.
*
* Communicates with the manageability block. On success return IXGBE_SUCCESS
* else returns semaphore error when encountering an error acquiring
* semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ *
+ * This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held
+ * by the caller.
**/
-s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
- u32 length, u32 timeout, bool return_data)
+s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length,
+ u32 timeout)
{
- u32 hicr, i, bi, fwsts;
- u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
- u16 buf_len;
+ u32 hicr, i, fwsts;
u16 dword_len;
- s32 status;
- DEBUGFUNC("ixgbe_host_interface_command");
+ DEBUGFUNC("ixgbe_hic_unlocked");
- if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
- /* Take management host interface semaphore */
- status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
-
- if (status)
- return status;
/* Set bit 9 of FWSTS clearing FW reset indication */
fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
/* Check that the host interface is enabled. */
hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
- if ((hicr & IXGBE_HICR_EN) == 0) {
+ if (!(hicr & IXGBE_HICR_EN)) {
DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
- status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto rel_out;
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
/* Calculate length in DWORDs. We must be DWORD aligned */
- if ((length % (sizeof(u32))) != 0) {
+ if (length % sizeof(u32)) {
DEBUGOUT("Buffer length failure, not aligned to dword");
- status = IXGBE_ERR_INVALID_ARGUMENT;
- goto rel_out;
+ return IXGBE_ERR_INVALID_ARGUMENT;
}
dword_len = length >> 2;
}
/* Check command completion */
- if ((timeout != 0 && i == timeout) ||
+ if ((timeout && i == timeout) ||
!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
ERROR_REPORT1(IXGBE_ERROR_CAUTION,
"Command has failed with no status valid.\n");
- status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto rel_out;
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_host_interface_command - Issue command to manageability block
+ * @hw: pointer to the HW structure
+ * @buffer: contains the command to write and where the return status will
+ * be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ * @return_data: read and return data from the buffer (true) or not (false)
+ * Needed because FW structures are big endian and decoding of
+ * these fields can be 8 bit or 16 bit based on command. Decoding
+ * is not easily understood without making a table of commands.
+ * So we will leave this up to the caller to read back the data
+ * in these cases.
+ *
+ * Communicates with the manageability block. On success return IXGBE_SUCCESS
+ * else returns semaphore error when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+ u32 length, u32 timeout, bool return_data)
+{
+ u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+ u16 dword_len;
+ u16 buf_len;
+ s32 status;
+ u32 bi;
+
+ DEBUGFUNC("ixgbe_host_interface_command");
+
+ if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
+ /* Take management host interface semaphore */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+ if (status)
+ return status;
+
+ status = ixgbe_hic_unlocked(hw, buffer, length, timeout);
+ if (status)
+ goto rel_out;
+
if (!return_data)
goto rel_out;
/* If there is any thing in data position pull it in */
buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
- if (buf_len == 0)
+ if (!buf_len)
goto rel_out;
if (length < buf_len + hdr_size) {
* semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
**/
s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
- u8 build, u8 sub)
+ u8 build, u8 sub, u16 len,
+ const char *driver_ver)
{
struct ixgbe_hic_drv_info fw_cmd;
int i;
s32 ret_val = IXGBE_SUCCESS;
DEBUGFUNC("ixgbe_set_fw_drv_ver_generic");
+ UNREFERENCED_2PARAMETER(len, driver_ver);
fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
speedcnt++;
highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
- /* If we already have link at this speed, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, false);
- if (status != IXGBE_SUCCESS)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
- goto out;
-
/* Set the module link speed */
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber:
if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
- /* If we already have link at this speed, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, false);
- if (status != IXGBE_SUCCESS)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
- goto out;
-
/* Set the module link speed */
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber:
git.droids-corp.org / dpdk.git / blobdiff