-/*******************************************************************************
-
-Copyright (c) 2001-2015, Intel Corporation
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- 3. Neither the name of the Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-***************************************************************************/
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2020 Intel Corporation
+ */
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
u16 offset);
/**
- * ixgbe_init_ops_generic - Inits function ptrs
- * @hw: pointer to the hardware structure
+ * ixgbe_init_ops_generic - Inits function ptrs
+ * @hw: pointer to the hardware structure
*
- * Initialize the function pointers.
+ * Initialize the function pointers.
**/
s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw)
{
mac->ops.led_off = ixgbe_led_off_generic;
mac->ops.blink_led_start = ixgbe_blink_led_start_generic;
mac->ops.blink_led_stop = ixgbe_blink_led_stop_generic;
+ mac->ops.init_led_link_act = ixgbe_init_led_link_act_generic;
/* RAR, Multicast, VLAN */
mac->ops.set_rar = ixgbe_set_rar_generic;
/* Flow Control */
mac->ops.fc_enable = ixgbe_fc_enable_generic;
mac->ops.setup_fc = ixgbe_setup_fc_generic;
+ mac->ops.fc_autoneg = ixgbe_fc_autoneg;
/* Link */
mac->ops.get_link_capabilities = NULL;
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- /* if link is down, assume supported */
- if (link_up)
- supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ /* flow control autoneg black list */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ case IXGBE_DEV_ID_X550EM_A_QSFP:
+ case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+ supported = false;
+ break;
+ default:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
true : false;
- else
- supported = true;
+ else
+ supported = true;
+ }
+
break;
case ixgbe_media_type_backplane:
- supported = true;
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_XFI)
+ supported = false;
+ else
+ supported = true;
break;
case ixgbe_media_type_copper:
/* only some copper devices support flow control autoneg */
case IXGBE_DEV_ID_X550T:
case IXGBE_DEV_ID_X550T1:
case IXGBE_DEV_ID_X550EM_X_10G_T:
+ case IXGBE_DEV_ID_X550EM_A_10G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T_L:
supported = true;
break;
default:
break;
}
- ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
- "Device %x does not support flow control autoneg",
- hw->device_id);
+ if (!supported)
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Device %x does not support flow control autoneg",
+ hw->device_id);
return supported;
}
/**
- * ixgbe_setup_fc_generic - Set up flow control
- * @hw: pointer to hardware structure
+ * ixgbe_setup_fc_generic - Set up flow control
+ * @hw: pointer to hardware structure
*
- * Called at init time to set up flow control.
+ * Called at init time to set up flow control.
**/
s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw)
{
if (ret_val != IXGBE_SUCCESS)
goto out;
- /* only backplane uses autoc so fall though */
+ /* fall through - only backplane uses autoc */
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
}
/**
- * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
- * @hw: pointer to hardware structure
+ * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
*
- * Starts the hardware by filling the bus info structure and media type, clears
- * all on chip counters, initializes receive address registers, multicast
- * table, VLAN filter table, calls routine to set up link and flow control
- * settings, and leaves transmit and receive units disabled and uninitialized
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
**/
s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
{
s32 ret_val;
u32 ctrl_ext;
+ u16 device_caps;
DEBUGFUNC("ixgbe_start_hw_generic");
/* Setup flow control */
ret_val = ixgbe_setup_fc(hw);
- if (ret_val != IXGBE_SUCCESS)
- goto out;
+ if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED) {
+ DEBUGOUT1("Flow control setup failed, returning %d\n", ret_val);
+ return ret_val;
+ }
+
+ /* Cache bit indicating need for crosstalk fix */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X550EM_x:
+ case ixgbe_mac_X550EM_a:
+ hw->mac.ops.get_device_caps(hw, &device_caps);
+ if (device_caps & IXGBE_DEVICE_CAPS_NO_CROSSTALK_WR)
+ hw->need_crosstalk_fix = false;
+ else
+ hw->need_crosstalk_fix = true;
+ break;
+ default:
+ hw->need_crosstalk_fix = false;
+ break;
+ }
/* Clear adapter stopped flag */
hw->adapter_stopped = false;
-out:
- return ret_val;
+ return IXGBE_SUCCESS;
}
/**
- * ixgbe_start_hw_gen2 - Init sequence for common device family
- * @hw: pointer to hw structure
+ * ixgbe_start_hw_gen2 - Init sequence for common device family
+ * @hw: pointer to hw structure
*
* Performs the init sequence common to the second generation
* of 10 GbE devices.
* Devices in the second generation:
- * 82599
- * X540
+ * 82599
+ * X540
**/
-s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
+void ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
{
u32 i;
u32 regval;
IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
}
-
- return IXGBE_SUCCESS;
}
/**
- * ixgbe_init_hw_generic - Generic hardware initialization
- * @hw: pointer to hardware structure
+ * ixgbe_init_hw_generic - Generic hardware initialization
+ * @hw: pointer to hardware structure
*
- * Initialize the hardware by resetting the hardware, filling the bus info
- * structure and media type, clears all on chip counters, initializes receive
- * address registers, multicast table, VLAN filter table, calls routine to set
- * up link and flow control settings, and leaves transmit and receive units
- * disabled and uninitialized
+ * Initialize the hardware by resetting the hardware, filling the bus info
+ * structure and media type, clears all on chip counters, initializes receive
+ * address registers, multicast table, VLAN filter table, calls routine to set
+ * up link and flow control settings, and leaves transmit and receive units
+ * disabled and uninitialized
**/
s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
{
/* Reset the hardware */
status = hw->mac.ops.reset_hw(hw);
- if (status == IXGBE_SUCCESS) {
+ if (status == IXGBE_SUCCESS || status == IXGBE_ERR_SFP_NOT_PRESENT) {
/* Start the HW */
status = hw->mac.ops.start_hw(hw);
}
+ /* Initialize the LED link active for LED blink support */
+ if (hw->mac.ops.init_led_link_act)
+ hw->mac.ops.init_led_link_act(hw);
+
+ if (status != IXGBE_SUCCESS)
+ DEBUGOUT1("Failed to initialize HW, STATUS = %d\n", status);
+
return status;
}
/**
- * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
- * @hw: pointer to hardware structure
+ * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
+ * @hw: pointer to hardware structure
*
- * Clears all hardware statistics counters by reading them from the hardware
- * Statistics counters are clear on read.
+ * Clears all hardware statistics counters by reading them from the hardware
+ * Statistics counters are clear on read.
**/
s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_read_pba_string_generic - Reads part number string from EEPROM
- * @hw: pointer to hardware structure
- * @pba_num: stores the part number string from the EEPROM
- * @pba_num_size: part number string buffer length
+ * ixgbe_read_pba_string_generic - Reads part number string from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number string from the EEPROM
+ * @pba_num_size: part number string buffer length
*
- * Reads the part number string from the EEPROM.
+ * Reads the part number string from the EEPROM.
**/
s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
u32 pba_num_size)
}
/**
- * ixgbe_read_pba_num_generic - Reads part number from EEPROM
- * @hw: pointer to hardware structure
- * @pba_num: stores the part number from the EEPROM
+ * ixgbe_read_pba_num_generic - Reads part number from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number from the EEPROM
*
- * Reads the part number from the EEPROM.
+ * Reads the part number from the EEPROM.
**/
s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
{
DEBUGOUT("NVM Read Error\n");
return ret_val;
}
- *pba_num |= data;
+ *pba_num |= (u32)data;
return IXGBE_SUCCESS;
}
/**
- * ixgbe_read_pba_raw
- * @hw: pointer to the HW structure
- * @eeprom_buf: optional pointer to EEPROM image
- * @eeprom_buf_size: size of EEPROM image in words
- * @max_pba_block_size: PBA block size limit
- * @pba: pointer to output PBA structure
+ * ixgbe_read_pba_raw
+ * @hw: pointer to the HW structure
+ * @eeprom_buf: optional pointer to EEPROM image
+ * @eeprom_buf_size: size of EEPROM image in words
+ * @max_pba_block_size: PBA block size limit
+ * @pba: pointer to output PBA structure
*
- * Reads PBA from EEPROM image when eeprom_buf is not NULL.
- * Reads PBA from physical EEPROM device when eeprom_buf is NULL.
+ * Reads PBA from EEPROM image when eeprom_buf is not NULL.
+ * Reads PBA from physical EEPROM device when eeprom_buf is NULL.
*
**/
s32 ixgbe_read_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
}
/**
- * ixgbe_write_pba_raw
- * @hw: pointer to the HW structure
- * @eeprom_buf: optional pointer to EEPROM image
- * @eeprom_buf_size: size of EEPROM image in words
- * @pba: pointer to PBA structure
+ * ixgbe_write_pba_raw
+ * @hw: pointer to the HW structure
+ * @eeprom_buf: optional pointer to EEPROM image
+ * @eeprom_buf_size: size of EEPROM image in words
+ * @pba: pointer to PBA structure
*
- * Writes PBA to EEPROM image when eeprom_buf is not NULL.
- * Writes PBA to physical EEPROM device when eeprom_buf is NULL.
+ * Writes PBA to EEPROM image when eeprom_buf is not NULL.
+ * Writes PBA to physical EEPROM device when eeprom_buf is NULL.
*
**/
s32 ixgbe_write_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
}
/**
- * ixgbe_get_pba_block_size
- * @hw: pointer to the HW structure
- * @eeprom_buf: optional pointer to EEPROM image
- * @eeprom_buf_size: size of EEPROM image in words
- * @pba_data_size: pointer to output variable
+ * ixgbe_get_pba_block_size
+ * @hw: pointer to the HW structure
+ * @eeprom_buf: optional pointer to EEPROM image
+ * @eeprom_buf_size: size of EEPROM image in words
+ * @pba_data_size: pointer to output variable
*
- * Returns the size of the PBA block in words. Function operates on EEPROM
- * image if the eeprom_buf pointer is not NULL otherwise it accesses physical
- * EEPROM device.
+ * Returns the size of the PBA block in words. Function operates on EEPROM
+ * image if the eeprom_buf pointer is not NULL otherwise it accesses physical
+ * EEPROM device.
*
**/
s32 ixgbe_get_pba_block_size(struct ixgbe_hw *hw, u16 *eeprom_buf,
}
/**
- * ixgbe_get_mac_addr_generic - Generic get MAC address
- * @hw: pointer to hardware structure
- * @mac_addr: Adapter MAC address
+ * ixgbe_get_mac_addr_generic - Generic get MAC address
+ * @hw: pointer to hardware structure
+ * @mac_addr: Adapter MAC address
*
- * Reads the adapter's MAC address from first Receive Address Register (RAR0)
- * A reset of the adapter must be performed prior to calling this function
- * in order for the MAC address to have been loaded from the EEPROM into RAR0
+ * Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ * A reset of the adapter must be performed prior to calling this function
+ * in order for the MAC address to have been loaded from the EEPROM into RAR0
**/
s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
{
}
/**
- * ixgbe_set_pci_config_data_generic - Generic store PCI bus info
- * @hw: pointer to hardware structure
- * @link_status: the link status returned by the PCI config space
+ * ixgbe_set_pci_config_data_generic - Generic store PCI bus info
+ * @hw: pointer to hardware structure
+ * @link_status: the link status returned by the PCI config space
*
- * Stores the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ * Stores the PCI bus info (speed, width, type) within the ixgbe_hw structure
**/
void ixgbe_set_pci_config_data_generic(struct ixgbe_hw *hw, u16 link_status)
{
}
/**
- * ixgbe_get_bus_info_generic - Generic set PCI bus info
- * @hw: pointer to hardware structure
+ * ixgbe_get_bus_info_generic - Generic set PCI bus info
+ * @hw: pointer to hardware structure
*
- * Gets the PCI bus info (speed, width, type) then calls helper function to
- * store this data within the ixgbe_hw structure.
+ * Gets the PCI bus info (speed, width, type) then calls helper function to
+ * store this data within the ixgbe_hw structure.
**/
s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
- * @hw: pointer to the HW structure
+ * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ * @hw: pointer to the HW structure
*
- * Determines the LAN function id by reading memory-mapped registers and swaps
- * the port value if requested, and set MAC instance for devices that share
- * CS4227.
+ * Determines the LAN function id by reading memory-mapped registers and swaps
+ * the port value if requested, and set MAC instance for devices that share
+ * CS4227.
**/
void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
{
reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
- bus->lan_id = bus->func;
+ bus->lan_id = (u8)bus->func;
/* check for a port swap */
reg = IXGBE_READ_REG(hw, IXGBE_FACTPS_BY_MAC(hw));
if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) {
hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4);
bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >>
- IXGBE_EE_CTRL_4_INST_ID_SHIFT;
+ IXGBE_EE_CTRL_4_INST_ID_SHIFT;
}
}
/**
- * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
- * @hw: pointer to hardware structure
+ * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
+ * @hw: pointer to hardware structure
*
- * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
- * disables transmit and receive units. The adapter_stopped flag is used by
- * the shared code and drivers to determine if the adapter is in a stopped
- * state and should not touch the hardware.
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
**/
s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_led_on_generic - Turns on the software controllable LEDs.
- * @hw: pointer to hardware structure
- * @index: led number to turn on
+ * ixgbe_init_led_link_act_generic - Store the LED index link/activity.
+ * @hw: pointer to hardware structure
+ *
+ * Store the index for the link active LED. This will be used to support
+ * blinking the LED.
+ **/
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ u32 led_reg, led_mode;
+ u8 i;
+
+ led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /* Get LED link active from the LEDCTL register */
+ for (i = 0; i < 4; i++) {
+ led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i);
+
+ if ((led_mode & IXGBE_LED_MODE_MASK_BASE) ==
+ IXGBE_LED_LINK_ACTIVE) {
+ mac->led_link_act = i;
+ return IXGBE_SUCCESS;
+ }
+ }
+
+ /*
+ * If LEDCTL register does not have the LED link active set, then use
+ * known MAC defaults.
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550EM_a:
+ case ixgbe_mac_X550EM_x:
+ mac->led_link_act = 1;
+ break;
+ default:
+ mac->led_link_act = 2;
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_led_on_generic - Turns on the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @index: led number to turn on
**/
s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
{
DEBUGFUNC("ixgbe_led_on_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/* To turn on the LED, set mode to ON. */
led_reg &= ~IXGBE_LED_MODE_MASK(index);
led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
}
/**
- * ixgbe_led_off_generic - Turns off the software controllable LEDs.
- * @hw: pointer to hardware structure
- * @index: led number to turn off
+ * ixgbe_led_off_generic - Turns off the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @index: led number to turn off
**/
s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
{
DEBUGFUNC("ixgbe_led_off_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/* To turn off the LED, set mode to OFF. */
led_reg &= ~IXGBE_LED_MODE_MASK(index);
led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
}
/**
- * ixgbe_init_eeprom_params_generic - Initialize EEPROM params
- * @hw: pointer to hardware structure
+ * ixgbe_init_eeprom_params_generic - Initialize EEPROM params
+ * @hw: pointer to hardware structure
*
- * Initializes the EEPROM parameters ixgbe_eeprom_info within the
- * ixgbe_hw struct in order to set up EEPROM access.
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
**/
s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to write
- * @words: number of word(s)
- * @data: 16 bit word(s) to write to EEPROM
+ * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to write
+ * @words: number of word(s)
+ * @data: 16 bit word(s) to write to EEPROM
*
- * Reads 16 bit word(s) from EEPROM through bit-bang method
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
**/
s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
}
/**
- * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @words: number of word(s)
- * @data: 16 bit word(s) to be written to the EEPROM
+ * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of word(s)
+ * @data: 16 bit word(s) to be written to the EEPROM
*
- * If ixgbe_eeprom_update_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
**/
STATIC s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
}
/**
- * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @data: 16 bit word to be written to the EEPROM
+ * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word to be written to the EEPROM
*
- * If ixgbe_eeprom_update_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
**/
s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
{
}
/**
- * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @data: read 16 bit words(s) from EEPROM
- * @words: number of word(s)
+ * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit words(s) from EEPROM
+ * @words: number of word(s)
*
- * Reads 16 bit word(s) from EEPROM through bit-bang method
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
**/
s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
}
/**
- * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @words: number of word(s)
- * @data: read 16 bit word(s) from EEPROM
+ * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @words: number of word(s)
+ * @data: read 16 bit word(s) from EEPROM
*
- * Reads 16 bit word(s) from EEPROM through bit-bang method
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
**/
STATIC s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
}
/**
- * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @data: read 16 bit value from EEPROM
+ * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
*
- * Reads 16 bit value from EEPROM through bit-bang method
+ * Reads 16 bit value from EEPROM through bit-bang method
**/
s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 *data)
}
/**
- * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of word(s)
- * @data: 16 bit word(s) from the EEPROM
+ * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of word(s)
+ * @data: 16 bit word(s) from the EEPROM
*
- * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
**/
s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
}
/**
- * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be used as a scratch pad
+ * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be used as a scratch pad
*
- * Discover EEPROM page size by writing marching data at given offset.
- * This function is called only when we are writing a new large buffer
- * at given offset so the data would be overwritten anyway.
+ * Discover EEPROM page size by writing marching data at given offset.
+ * This function is called only when we are writing a new large buffer
+ * at given offset so the data would be overwritten anyway.
**/
STATIC s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
u16 offset)
}
/**
- * ixgbe_read_eerd_generic - Read EEPROM word using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EEPROM
+ * ixgbe_read_eerd_generic - Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
*
- * Reads a 16 bit word from the EEPROM using the EERD register.
+ * Reads a 16 bit word from the EEPROM using the EERD register.
**/
s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
}
/**
- * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @words: number of word(s)
- * @data: word(s) write to the EEPROM
+ * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of word(s)
+ * @data: word(s) write to the EEPROM
*
- * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
**/
s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
}
/**
- * ixgbe_write_eewr_generic - Write EEPROM word using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @data: word write to the EEPROM
+ * ixgbe_write_eewr_generic - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
*
- * Write a 16 bit word to the EEPROM using the EEWR register.
+ * Write a 16 bit word to the EEPROM using the EEWR register.
**/
s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
{
}
/**
- * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
- * @hw: pointer to hardware structure
- * @ee_reg: EEPROM flag for polling
+ * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
+ * @hw: pointer to hardware structure
+ * @ee_reg: EEPROM flag for polling
*
- * Polls the status bit (bit 1) of the EERD or EEWR to determine when the
- * read or write is done respectively.
+ * Polls the status bit (bit 1) of the EERD or EEWR to determine when the
+ * read or write is done respectively.
**/
s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
{
}
/**
- * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
- * @hw: pointer to hardware structure
+ * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ * @hw: pointer to hardware structure
*
- * Prepares EEPROM for access using bit-bang method. This function should
- * be called before issuing a command to the EEPROM.
+ * Prepares EEPROM for access using bit-bang method. This function should
+ * be called before issuing a command to the EEPROM.
**/
STATIC s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_eeprom_semaphore - Get hardware semaphore
- * @hw: pointer to hardware structure
+ * ixgbe_get_eeprom_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
*
- * Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ * Sets the hardware semaphores so EEPROM access can occur for bit-bang method
**/
STATIC s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_release_eeprom_semaphore - Release hardware semaphore
- * @hw: pointer to hardware structure
+ * ixgbe_release_eeprom_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
*
- * This function clears hardware semaphore bits.
+ * This function clears hardware semaphore bits.
**/
STATIC void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_ready_eeprom - Polls for EEPROM ready
- * @hw: pointer to hardware structure
+ * ixgbe_ready_eeprom - Polls for EEPROM ready
+ * @hw: pointer to hardware structure
**/
STATIC s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
- * @hw: pointer to hardware structure
+ * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: pointer to hardware structure
**/
STATIC void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
- * @hw: pointer to hardware structure
- * @data: data to send to the EEPROM
- * @count: number of bits to shift out
+ * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ * @hw: pointer to hardware structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
**/
STATIC void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
u16 count)
}
/**
- * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
- * @hw: pointer to hardware structure
+ * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to hardware structure
+ * @count: number of bits to shift
**/
STATIC u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
{
}
/**
- * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
- * @hw: pointer to hardware structure
- * @eec: EEC register's current value
+ * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eec: EEC register's current value
**/
STATIC void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
{
}
/**
- * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
- * @hw: pointer to hardware structure
- * @eecd: EECD's current value
+ * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eec: EEC's current value
**/
STATIC void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
{
}
/**
- * ixgbe_release_eeprom - Release EEPROM, release semaphores
- * @hw: pointer to hardware structure
+ * ixgbe_release_eeprom - Release EEPROM, release semaphores
+ * @hw: pointer to hardware structure
**/
STATIC void ixgbe_release_eeprom(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
- * @hw: pointer to hardware structure
+ * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
*
- * Returns a negative error code on error, or the 16-bit checksum
+ * Returns a negative error code on error, or the 16-bit checksum
**/
s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
- * @hw: pointer to hardware structure
- * @checksum_val: calculated checksum
+ * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
*
- * Performs checksum calculation and validates the EEPROM checksum. If the
- * caller does not need checksum_val, the value can be NULL.
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
**/
s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
u16 *checksum_val)
}
/**
- * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
- * @hw: pointer to hardware structure
+ * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
+ * @hw: pointer to hardware structure
**/
s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_validate_mac_addr - Validate MAC address
- * @mac_addr: pointer to MAC address.
+ * ixgbe_validate_mac_addr - Validate MAC address
+ * @mac_addr: pointer to MAC address.
*
- * Tests a MAC address to ensure it is a valid Individual Address.
+ * Tests a MAC address to ensure it is a valid Individual Address.
**/
s32 ixgbe_validate_mac_addr(u8 *mac_addr)
{
}
/**
- * ixgbe_set_rar_generic - Set Rx address register
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
- * @addr: Address to put into receive address register
- * @vmdq: VMDq "set" or "pool" index
- * @enable_addr: set flag that address is active
+ * ixgbe_set_rar_generic - Set Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
+ * @enable_addr: set flag that address is active
*
- * Puts an ethernet address into a receive address register.
+ * Puts an ethernet address into a receive address register.
**/
s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr)
}
/**
- * ixgbe_clear_rar_generic - Remove Rx address register
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
+ * ixgbe_clear_rar_generic - Remove Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
*
- * Clears an ethernet address from a receive address register.
+ * Clears an ethernet address from a receive address register.
**/
s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
{
}
/**
- * ixgbe_init_rx_addrs_generic - Initializes receive address filters.
- * @hw: pointer to hardware structure
+ * ixgbe_init_rx_addrs_generic - Initializes receive address filters.
+ * @hw: pointer to hardware structure
*
- * Places the MAC address in receive address register 0 and clears the rest
- * of the receive address registers. Clears the multicast table. Assumes
- * the receiver is in reset when the routine is called.
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
**/
s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_add_uc_addr - Adds a secondary unicast address.
- * @hw: pointer to hardware structure
- * @addr: new address
+ * ixgbe_add_uc_addr - Adds a secondary unicast address.
+ * @hw: pointer to hardware structure
+ * @addr: new address
+ * @vmdq: VMDq "set" or "pool" index
*
- * Adds it to unused receive address register or goes into promiscuous mode.
+ * Adds it to unused receive address register or goes into promiscuous mode.
**/
void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
{
}
/**
- * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
- * @hw: pointer to hardware structure
- * @addr_list: the list of new addresses
- * @addr_count: number of addresses
- * @next: iterator function to walk the address list
+ * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
+ * @hw: pointer to hardware structure
+ * @addr_list: the list of new addresses
+ * @addr_count: number of addresses
+ * @next: iterator function to walk the address list
*
- * The given list replaces any existing list. Clears the secondary addrs from
- * receive address registers. Uses unused receive address registers for the
- * first secondary addresses, and falls back to promiscuous mode as needed.
+ * The given list replaces any existing list. Clears the secondary addrs from
+ * receive address registers. Uses unused receive address registers for the
+ * first secondary addresses, and falls back to promiscuous mode as needed.
*
- * Drivers using secondary unicast addresses must set user_set_promisc when
- * manually putting the device into promiscuous mode.
+ * Drivers using secondary unicast addresses must set user_set_promisc when
+ * manually putting the device into promiscuous mode.
**/
s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
u32 addr_count, ixgbe_mc_addr_itr next)
}
/**
- * ixgbe_mta_vector - Determines bit-vector in multicast table to set
- * @hw: pointer to hardware structure
- * @mc_addr: the multicast address
+ * ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
*
- * Extracts the 12 bits, from a multicast address, to determine which
- * bit-vector to set in the multicast table. The hardware uses 12 bits, from
- * incoming rx multicast addresses, to determine the bit-vector to check in
- * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initialization
- * to mc_filter_type.
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
+ * to mc_filter_type.
**/
STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
{
}
/**
- * ixgbe_set_mta - Set bit-vector in multicast table
- * @hw: pointer to hardware structure
- * @hash_value: Multicast address hash value
+ * ixgbe_set_mta - Set bit-vector in multicast table
+ * @hw: pointer to hardware structure
+ * @mc_addr: Multicast address
*
- * Sets the bit-vector in the multicast table.
+ * Sets the bit-vector in the multicast table.
**/
void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
{
}
/**
- * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
- * @hw: pointer to hardware structure
- * @mc_addr_list: the list of new multicast addresses
- * @mc_addr_count: number of addresses
- * @next: iterator function to walk the multicast address list
- * @clear: flag, when set clears the table beforehand
+ * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
+ * @hw: pointer to hardware structure
+ * @mc_addr_list: the list of new multicast addresses
+ * @mc_addr_count: number of addresses
+ * @next: iterator function to walk the multicast address list
+ * @clear: flag, when set clears the table beforehand
*
- * When the clear flag is set, the given list replaces any existing list.
- * Hashes the given addresses into the multicast table.
+ * When the clear flag is set, the given list replaces any existing list.
+ * Hashes the given addresses into the multicast table.
**/
s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count, ixgbe_mc_addr_itr next,
}
/**
- * ixgbe_enable_mc_generic - Enable multicast address in RAR
- * @hw: pointer to hardware structure
+ * ixgbe_enable_mc_generic - Enable multicast address in RAR
+ * @hw: pointer to hardware structure
*
- * Enables multicast address in RAR and the use of the multicast hash table.
+ * Enables multicast address in RAR and the use of the multicast hash table.
**/
s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_disable_mc_generic - Disable multicast address in RAR
- * @hw: pointer to hardware structure
+ * ixgbe_disable_mc_generic - Disable multicast address in RAR
+ * @hw: pointer to hardware structure
*
- * Disables multicast address in RAR and the use of the multicast hash table.
+ * Disables multicast address in RAR and the use of the multicast hash table.
**/
s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_fc_enable_generic - Enable flow control
- * @hw: pointer to hardware structure
+ * ixgbe_fc_enable_generic - Enable flow control
+ * @hw: pointer to hardware structure
*
- * Enable flow control according to the current settings.
+ * Enable flow control according to the current settings.
**/
s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
{
}
/* Negotiate the fc mode to use */
- ixgbe_fc_autoneg(hw);
+ hw->mac.ops.fc_autoneg(hw);
/* Disable any previous flow control settings */
mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
}
/**
- * ixgbe_negotiate_fc - Negotiate flow control
- * @hw: pointer to hardware structure
- * @adv_reg: flow control advertised settings
- * @lp_reg: link partner's flow control settings
- * @adv_sym: symmetric pause bit in advertisement
- * @adv_asm: asymmetric pause bit in advertisement
- * @lp_sym: symmetric pause bit in link partner advertisement
- * @lp_asm: asymmetric pause bit in link partner advertisement
+ * ixgbe_negotiate_fc - Negotiate flow control
+ * @hw: pointer to hardware structure
+ * @adv_reg: flow control advertised settings
+ * @lp_reg: link partner's flow control settings
+ * @adv_sym: symmetric pause bit in advertisement
+ * @adv_asm: asymmetric pause bit in advertisement
+ * @lp_sym: symmetric pause bit in link partner advertisement
+ * @lp_asm: asymmetric pause bit in link partner advertisement
*
- * Find the intersection between advertised settings and link partner's
- * advertised settings
+ * Find the intersection between advertised settings and link partner's
+ * advertised settings
**/
-STATIC s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
- u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+ u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
{
if ((!(adv_reg)) || (!(lp_reg))) {
ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED,
}
/**
- * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
- * @hw: pointer to hardware structure
+ * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
+ * @hw: pointer to hardware structure
*
- * Enable flow control according on 1 gig fiber.
+ * Enable flow control according on 1 gig fiber.
**/
STATIC s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
- * @hw: pointer to hardware structure
+ * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
*
- * Enable flow control according to IEEE clause 37.
+ * Enable flow control according to IEEE clause 37.
**/
STATIC s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
- * @hw: pointer to hardware structure
+ * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
*
- * Enable flow control according to IEEE clause 37.
+ * Enable flow control according to IEEE clause 37.
**/
STATIC s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_fc_autoneg - Configure flow control
- * @hw: pointer to hardware structure
+ * ixgbe_fc_autoneg - Configure flow control
+ * @hw: pointer to hardware structure
*
- * Compares our advertised flow control capabilities to those advertised by
- * our link partner, and determines the proper flow control mode to use.
+ * Compares our advertised flow control capabilities to those advertised by
+ * our link partner, and determines the proper flow control mode to use.
**/
void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_disable_pcie_master - Disable PCI-express master access
- * @hw: pointer to hardware structure
+ * ixgbe_disable_pcie_master - Disable PCI-express master access
+ * @hw: pointer to hardware structure
*
- * Disables PCI-Express master access and verifies there are no pending
- * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
- * bit hasn't caused the master requests to be disabled, else IXGBE_SUCCESS
- * is returned signifying master requests disabled.
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ * bit hasn't caused the master requests to be disabled, else IXGBE_SUCCESS
+ * is returned signifying master requests disabled.
**/
s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to acquire
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
*
- * Acquires the SWFW semaphore through the GSSR register for the specified
- * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ * Acquires the SWFW semaphore through the GSSR register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
**/
s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_release_swfw_sync - Release SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to release
+ * ixgbe_release_swfw_sync - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
*
- * Releases the SWFW semaphore through the GSSR register for the specified
- * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ * Releases the SWFW semaphore through the GSSR register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
**/
void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_disable_sec_rx_path_generic - Stops the receive data path
- * @hw: pointer to hardware structure
+ * ixgbe_disable_sec_rx_path_generic - Stops the receive data path
+ * @hw: pointer to hardware structure
*
- * Stops the receive data path and waits for the HW to internally empty
- * the Rx security block
+ * Stops the receive data path and waits for the HW to internally empty
+ * the Rx security block
**/
s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw)
{
-#define IXGBE_MAX_SECRX_POLL 40
+#define IXGBE_MAX_SECRX_POLL 4000
int i;
int secrxreg;
break;
else
/* Use interrupt-safe sleep just in case */
- usec_delay(1000);
+ usec_delay(10);
}
/* For informational purposes only */
}
/**
- * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read
- * @hw: pointer to hardware structure
- * @reg_val: Value we read from AUTOC
+ * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read
+ * @hw: pointer to hardware structure
+ * @locked: bool to indicate whether the SW/FW lock was taken
+ * @reg_val: Value we read from AUTOC
*
- * The default case requires no protection so just to the register read.
+ * The default case requires no protection so just to the register read.
*/
s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
{
* @hw: pointer to hardware structure
* @reg_val: value to write to AUTOC
* @locked: bool to indicate whether the SW/FW lock was already taken by
- * previous read.
+ * previous read.
*
* The default case requires no protection so just to the register write.
*/
}
/**
- * ixgbe_enable_sec_rx_path_generic - Enables the receive data path
- * @hw: pointer to hardware structure
+ * ixgbe_enable_sec_rx_path_generic - Enables the receive data path
+ * @hw: pointer to hardware structure
*
- * Enables the receive data path.
+ * Enables the receive data path.
**/
s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw)
{
- int secrxreg;
+ u32 secrxreg;
DEBUGFUNC("ixgbe_enable_sec_rx_path_generic");
}
/**
- * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
- * @hw: pointer to hardware structure
- * @regval: register value to write to RXCTRL
+ * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
*
- * Enables the Rx DMA unit
+ * Enables the Rx DMA unit
**/
s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval)
{
}
/**
- * ixgbe_blink_led_start_generic - Blink LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to blink
+ * ixgbe_blink_led_start_generic - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
**/
s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
{
DEBUGFUNC("ixgbe_blink_led_start_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
/*
* Link must be up to auto-blink the LEDs;
* Force it if link is down.
}
/**
- * ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to stop blinking
+ * ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
**/
s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
{
DEBUGFUNC("ixgbe_blink_led_stop_generic");
+ if (index > 3)
+ return IXGBE_ERR_PARAM;
+
+
ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
if (ret_val != IXGBE_SUCCESS)
goto out;
}
/**
- * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
- * @hw: pointer to hardware structure
- * @san_mac_offset: SAN MAC address offset
+ * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
+ * @hw: pointer to hardware structure
+ * @san_mac_offset: SAN MAC address offset
*
- * This function will read the EEPROM location for the SAN MAC address
- * pointer, and returns the value at that location. This is used in both
- * get and set mac_addr routines.
+ * This function will read the EEPROM location for the SAN MAC address
+ * pointer, and returns the value at that location. This is used in both
+ * get and set mac_addr routines.
**/
STATIC s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
u16 *san_mac_offset)
}
/**
- * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
- * @hw: pointer to hardware structure
- * @san_mac_addr: SAN MAC address
+ * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
*
- * Reads the SAN MAC address from the EEPROM, if it's available. This is
- * per-port, so set_lan_id() must be called before reading the addresses.
- * set_lan_id() is called by identify_sfp(), but this cannot be relied
- * upon for non-SFP connections, so we must call it here.
+ * Reads the SAN MAC address from the EEPROM, if it's available. This is
+ * per-port, so set_lan_id() must be called before reading the addresses.
+ * set_lan_id() is called by identify_sfp(), but this cannot be relied
+ * upon for non-SFP connections, so we must call it here.
**/
s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
{
}
/**
- * ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM
- * @hw: pointer to hardware structure
- * @san_mac_addr: SAN MAC address
+ * ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
*
- * Write a SAN MAC address to the EEPROM.
+ * Write a SAN MAC address to the EEPROM.
**/
s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
{
}
/**
- * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
- * @hw: pointer to hardware structure
+ * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
+ * @hw: pointer to hardware structure
*
- * Read PCIe configuration space, and get the MSI-X vector count from
- * the capabilities table.
+ * Read PCIe configuration space, and get the MSI-X vector count from
+ * the capabilities table.
**/
u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_insert_mac_addr_generic - Find a RAR for this mac address
- * @hw: pointer to hardware structure
- * @addr: Address to put into receive address register
- * @vmdq: VMDq pool to assign
+ * ixgbe_insert_mac_addr_generic - Find a RAR for this mac address
+ * @hw: pointer to hardware structure
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq pool to assign
*
- * Puts an ethernet address into a receive address register, or
- * finds the rar that it is aleady in; adds to the pool list
+ * Puts an ethernet address into a receive address register, or
+ * finds the rar that it is already in; adds to the pool list
**/
s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
{
}
/**
- * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to disassociate
- * @vmdq: VMDq pool index to remove from the rar
+ * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to disassociate
+ * @vmdq: VMDq pool index to remove from the rar
**/
s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
if (mpsar_lo) {
IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
- mpsar_lo = 0;
+ mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
}
if (mpsar_hi) {
IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
- mpsar_hi = 0;
+ mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
}
} else if (vmdq < 32) {
mpsar_lo &= ~(1 << vmdq);
}
/* was that the last pool using this rar? */
- if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+ if (mpsar_lo == 0 && mpsar_hi == 0 &&
+ rar != 0 && rar != hw->mac.san_mac_rar_index)
hw->mac.ops.clear_rar(hw, rar);
done:
return IXGBE_SUCCESS;
}
/**
- * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to associate with a VMDq index
- * @vmdq: VMDq pool index
+ * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq pool index
**/
s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
}
/**
- * This function should only be involved in the IOV mode.
- * In IOV mode, Default pool is next pool after the number of
- * VFs advertized and not 0.
- * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index]
+ * This function should only be involved in the IOV mode.
+ * In IOV mode, Default pool is next pool after the number of
+ * VFs advertized and not 0.
+ * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index]
*
- * ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address
- * @hw: pointer to hardware struct
- * @vmdq: VMDq pool index
+ * ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address
+ * @hw: pointer to hardware struct
+ * @vmdq: VMDq pool index
**/
s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq)
{
}
/**
- * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
- * @hw: pointer to hardware structure
+ * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
+ * @hw: pointer to hardware structure
**/
s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
+ * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vlvf_bypass: true to find vlanid only, false returns first empty slot if
+ * vlanid not found
+ *
*
- * return the VLVF index where this VLAN id should be placed
+ * return the VLVF index where this VLAN id should be placed
*
**/
s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass)
}
/**
- * ixgbe_set_vfta_generic - Set VLAN filter table
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VLVFB
- * @vlan_on: boolean flag to turn on/off VLAN
- * @vlvf_bypass: boolean flag indicating updating default pool is okay
+ * ixgbe_set_vfta_generic - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ * @vlan_on: boolean flag to turn on/off VLAN
+ * @vlvf_bypass: boolean flag indicating updating default pool is okay
*
- * Turn on/off specified VLAN in the VLAN filter table.
+ * Turn on/off specified VLAN in the VLAN filter table.
**/
s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
bool vlan_on, bool vlvf_bypass)
vfta_delta = 1 << (vlan % 32);
vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx));
- /* vfta_delta represents the difference between the current value
+ /*
+ * vfta_delta represents the difference between the current value
* of vfta and the value we want in the register. Since the diff
* is an XOR mask we can just update the vfta using an XOR
*/
}
/**
- * ixgbe_set_vlvf_generic - Set VLAN Pool Filter
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VLVFB
- * @vlan_on: boolean flag to turn on/off VLAN in VLVF
- * @vfta_delta: pointer to the difference between the current value of VFTA
- * and the desired value
- * @vfta: the desired value of the VFTA
- * @vlvf_bypass: boolean flag indicating updating default pool is okay
+ * ixgbe_set_vlvf_generic - Set VLAN Pool Filter
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VLVF
+ * @vfta_delta: pointer to the difference between the current value of VFTA
+ * and the desired value
+ * @vfta: the desired value of the VFTA
+ * @vlvf_bypass: boolean flag indicating updating default pool is okay
*
- * Turn on/off specified bit in VLVF table.
+ * Turn on/off specified bit in VLVF table.
**/
s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
bool vlan_on, u32 *vfta_delta, u32 vfta,
*/
if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE))
return IXGBE_SUCCESS;
+
vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass);
if (vlvf_index < 0)
return vlvf_index;
* we run the risk of stray packets leaking into
* the PF via the default pool
*/
- if (vfta_delta)
+ if (*vfta_delta)
IXGBE_WRITE_REG(hw, IXGBE_VFTA(vlan / 32), vfta);
/* disable VLVF and clear remaining bit from pool */
return IXGBE_SUCCESS;
}
+
/* If there are still bits set in the VLVFB registers
* for the VLAN ID indicated we need to see if the
* caller is requesting that we clear the VFTA entry bit.
}
/**
- * ixgbe_clear_vfta_generic - Clear VLAN filter table
- * @hw: pointer to hardware structure
+ * ixgbe_clear_vfta_generic - Clear VLAN filter table
+ * @hw: pointer to hardware structure
*
- * Clears the VLAN filer table, and the VMDq index associated with the filter
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
**/
s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_check_mac_link_generic - Determine link and speed status
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true when link is up
- * @link_up_wait_to_complete: bool used to wait for link up or not
+ * ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix
+ * @hw: pointer to hardware structure
+ *
+ * Contains the logic to identify if we need to verify link for the
+ * crosstalk fix
+ **/
+static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw)
+{
+
+ /* Does FW say we need the fix */
+ if (!hw->need_crosstalk_fix)
+ return false;
+
+ /* Only consider SFP+ PHYs i.e. media type fiber */
+ switch (hw->mac.ops.get_media_type(hw)) {
+ case ixgbe_media_type_fiber:
+ case ixgbe_media_type_fiber_qsfp:
+ break;
+ default:
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * ixgbe_check_mac_link_generic - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
*
- * Reads the links register to determine if link is up and the current speed
+ * Reads the links register to determine if link is up and the current speed
**/
s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
bool *link_up, bool link_up_wait_to_complete)
DEBUGFUNC("ixgbe_check_mac_link_generic");
+ /* If Crosstalk fix enabled do the sanity check of making sure
+ * the SFP+ cage is full.
+ */
+ if (ixgbe_need_crosstalk_fix(hw)) {
+ u32 sfp_cage_full;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+ IXGBE_ESDP_SDP2;
+ break;
+ case ixgbe_mac_X550EM_x:
+ case ixgbe_mac_X550EM_a:
+ sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+ IXGBE_ESDP_SDP0;
+ break;
+ default:
+ /* sanity check - No SFP+ devices here */
+ sfp_cage_full = false;
+ break;
+ }
+
+ if (!sfp_cage_full) {
+ *link_up = false;
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ return IXGBE_SUCCESS;
+ }
+ }
+
/* clear the old state */
links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
break;
case IXGBE_LINKS_SPEED_100_82599:
*speed = IXGBE_LINK_SPEED_100_FULL;
- if (hw->mac.type >= ixgbe_mac_X550) {
+ if (hw->mac.type == ixgbe_mac_X550) {
if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
*speed = IXGBE_LINK_SPEED_5GB_FULL;
}
break;
+ case IXGBE_LINKS_SPEED_10_X550EM_A:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+#ifdef PREBOOT_SUPPORT
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T ||
+ hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L ||
+ hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII ||
+ hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L)
+ *speed = IXGBE_LINK_SPEED_10_FULL;
+#else
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T ||
+ hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L)
+ *speed = IXGBE_LINK_SPEED_10_FULL;
+#endif /* PREBOOT_SUPPORT */
+ break;
default:
*speed = IXGBE_LINK_SPEED_UNKNOWN;
}
}
/**
- * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from
- * the EEPROM
- * @hw: pointer to hardware structure
- * @wwnn_prefix: the alternative WWNN prefix
- * @wwpn_prefix: the alternative WWPN prefix
+ * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from
+ * the EEPROM
+ * @hw: pointer to hardware structure
+ * @wwnn_prefix: the alternative WWNN prefix
+ * @wwpn_prefix: the alternative WWPN prefix
*
- * This function will read the EEPROM from the alternative SAN MAC address
- * block to check the support for the alternative WWNN/WWPN prefix support.
+ * This function will read the EEPROM from the alternative SAN MAC address
+ * block to check the support for the alternative WWNN/WWPN prefix support.
**/
s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
u16 *wwpn_prefix)
}
/**
- * ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM
- * @hw: pointer to hardware structure
- * @bs: the fcoe boot status
+ * ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM
+ * @hw: pointer to hardware structure
+ * @bs: the fcoe boot status
*
- * This function will read the FCOE boot status from the iSCSI FCOE block
+ * This function will read the FCOE boot status from the iSCSI FCOE block
**/
s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs)
{
}
/**
- * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
- * @hw: pointer to hardware structure
- * @enable: enable or disable switch for anti-spoofing
- * @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for MAC anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for MAC anti-spoofing
*
**/
-void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
{
- int j;
- int pf_target_reg = pf >> 3;
- int pf_target_shift = pf % 8;
- u32 pfvfspoof = 0;
+ int vf_target_reg = vf >> 3;
+ int vf_target_shift = vf % 8;
+ u32 pfvfspoof;
if (hw->mac.type == ixgbe_mac_82598EB)
return;
+ pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
if (enable)
- pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
-
- /*
- * PFVFSPOOF register array is size 8 with 8 bits assigned to
- * MAC anti-spoof enables in each register array element.
- */
- for (j = 0; j < pf_target_reg; j++)
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
-
- /*
- * The PF should be allowed to spoof so that it can support
- * emulation mode NICs. Do not set the bits assigned to the PF
- */
- pfvfspoof &= (1 << pf_target_shift) - 1;
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
-
- /*
- * Remaining pools belong to the PF so they do not need to have
- * anti-spoofing enabled.
- */
- for (j++; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), 0);
+ pfvfspoof |= (1 << vf_target_shift);
+ else
+ pfvfspoof &= ~(1 << vf_target_shift);
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
}
/**
- * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
- * @hw: pointer to hardware structure
- * @enable: enable or disable switch for VLAN anti-spoofing
- * @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
+ * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for VLAN anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
*
**/
void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
}
/**
- * ixgbe_get_device_caps_generic - Get additional device capabilities
- * @hw: pointer to hardware structure
- * @device_caps: the EEPROM word with the extra device capabilities
+ * ixgbe_get_device_caps_generic - Get additional device capabilities
+ * @hw: pointer to hardware structure
+ * @device_caps: the EEPROM word with the extra device capabilities
*
- * This function will read the EEPROM location for the device capabilities,
- * and return the word through device_caps.
+ * This function will read the EEPROM location for the device capabilities,
+ * and return the word through device_caps.
**/
s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
{
}
/**
- * ixgbe_enable_relaxed_ordering_gen2 - Enable relaxed ordering
- * @hw: pointer to hardware structure
+ * ixgbe_enable_relaxed_ordering_gen2 - Enable relaxed ordering
+ * @hw: pointer to hardware structure
*
**/
void ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw *hw)
}
/**
- * ixgbe_calculate_checksum - Calculate checksum for buffer
- * @buffer: pointer to EEPROM
- * @length: size of EEPROM to calculate a checksum for
- * Calculates the checksum for some buffer on a specified length. The
- * checksum calculated is returned.
+ * ixgbe_calculate_checksum - Calculate checksum for buffer
+ * @buffer: pointer to EEPROM
+ * @length: size of EEPROM to calculate a checksum for
+ * Calculates the checksum for some buffer on a specified length. The
+ * checksum calculated is returned.
**/
u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
{
}
/**
- * ixgbe_host_interface_command - Issue command to manageability block
- * @hw: pointer to the HW structure
- * @buffer: contains the command to write and where the return status will
- * be placed
- * @length: length of buffer, must be multiple of 4 bytes
- * @timeout: time in ms to wait for command completion
- * @return_data: read and return data from the buffer (true) or not (false)
- * Needed because FW structures are big endian and decoding of
- * these fields can be 8 bit or 16 bit based on command. Decoding
- * is not easily understood without making a table of commands.
- * So we will leave this up to the caller to read back the data
- * in these cases.
+ * ixgbe_hic_unlocked - Issue command to manageability block unlocked
+ * @hw: pointer to the HW structure
+ * @buffer: command to write and where the return status will be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ *
+ * Communicates with the manageability block. On success return IXGBE_SUCCESS
+ * else returns semaphore error when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
*
- * Communicates with the manageability block. On success return IXGBE_SUCCESS
- * else returns semaphore error when encountering an error acquiring
- * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ * This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held
+ * by the caller.
**/
-s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
- u32 length, u32 timeout, bool return_data)
+s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length,
+ u32 timeout)
{
- u32 hicr, i, bi, fwsts;
- u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
- u16 buf_len;
+ u32 hicr, i, fwsts;
u16 dword_len;
- s32 status;
- DEBUGFUNC("ixgbe_host_interface_command");
+ DEBUGFUNC("ixgbe_hic_unlocked");
- if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
- /* Take management host interface semaphore */
- status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
-
- if (status)
- return status;
/* Set bit 9 of FWSTS clearing FW reset indication */
fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
/* Check that the host interface is enabled. */
hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
- if ((hicr & IXGBE_HICR_EN) == 0) {
+ if (!(hicr & IXGBE_HICR_EN)) {
DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
- status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto rel_out;
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
/* Calculate length in DWORDs. We must be DWORD aligned */
- if ((length % (sizeof(u32))) != 0) {
+ if (length % sizeof(u32)) {
DEBUGOUT("Buffer length failure, not aligned to dword");
- status = IXGBE_ERR_INVALID_ARGUMENT;
- goto rel_out;
+ return IXGBE_ERR_INVALID_ARGUMENT;
}
dword_len = length >> 2;
msec_delay(1);
}
+ /* For each command except "Apply Update" perform
+ * status checks in the HICR registry.
+ */
+ if ((buffer[0] & IXGBE_HOST_INTERFACE_MASK_CMD) ==
+ IXGBE_HOST_INTERFACE_APPLY_UPDATE_CMD)
+ return IXGBE_SUCCESS;
+
/* Check command completion */
- if ((timeout != 0 && i == timeout) ||
+ if ((timeout && i == timeout) ||
!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
ERROR_REPORT1(IXGBE_ERROR_CAUTION,
- "Command has failed with no status valid.\n");
- status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto rel_out;
+ "Command has failed with no status valid.\n");
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_host_interface_command - Issue command to manageability block
+ * @hw: pointer to the HW structure
+ * @buffer: contains the command to write and where the return status will
+ * be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ * @return_data: read and return data from the buffer (true) or not (false)
+ * Needed because FW structures are big endian and decoding of
+ * these fields can be 8 bit or 16 bit based on command. Decoding
+ * is not easily understood without making a table of commands.
+ * So we will leave this up to the caller to read back the data
+ * in these cases.
+ *
+ * Communicates with the manageability block. On success return IXGBE_SUCCESS
+ * else returns semaphore error when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+ u32 length, u32 timeout, bool return_data)
+{
+ u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+ struct ixgbe_hic_hdr *resp = (struct ixgbe_hic_hdr *)buffer;
+ u16 buf_len;
+ s32 status;
+ u32 bi;
+ u32 dword_len;
+
+ DEBUGFUNC("ixgbe_host_interface_command");
+
+ if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
+ /* Take management host interface semaphore */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+ if (status)
+ return status;
+
+ status = ixgbe_hic_unlocked(hw, buffer, length, timeout);
+ if (status)
+ goto rel_out;
+
if (!return_data)
goto rel_out;
/* first pull in the header so we know the buffer length */
for (bi = 0; bi < dword_len; bi++) {
buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
- IXGBE_LE32_TO_CPUS(&buffer[bi]);
+ IXGBE_LE32_TO_CPUS((uintptr_t)&buffer[bi]);
}
- /* If there is any thing in data position pull it in */
- buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
- if (buf_len == 0)
+ /*
+ * If there is any thing in data position pull it in
+ * Read Flash command requires reading buffer length from
+ * two byes instead of one byte
+ */
+ if (resp->cmd == IXGBE_HOST_INTERFACE_FLASH_READ_CMD ||
+ resp->cmd == IXGBE_HOST_INTERFACE_SHADOW_RAM_READ_CMD) {
+ for (; bi < dword_len + 2; bi++) {
+ buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+ bi);
+ IXGBE_LE32_TO_CPUS(&buffer[bi]);
+ }
+ buf_len = (((u16)(resp->cmd_or_resp.ret_status) << 3)
+ & 0xF00) | resp->buf_len;
+ hdr_size += (2 << 2);
+ } else {
+ buf_len = resp->buf_len;
+ }
+ if (!buf_len)
goto rel_out;
if (length < buf_len + hdr_size) {
/* Pull in the rest of the buffer (bi is where we left off) */
for (; bi <= dword_len; bi++) {
buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
- IXGBE_LE32_TO_CPUS(&buffer[bi]);
+ IXGBE_LE32_TO_CPUS((uintptr_t)&buffer[bi]);
}
rel_out:
}
/**
- * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
- * @hw: pointer to the HW structure
- * @maj: driver version major number
- * @min: driver version minor number
- * @build: driver version build number
- * @sub: driver version sub build number
+ * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
+ * @hw: pointer to the HW structure
+ * @maj: driver version major number
+ * @min: driver version minor number
+ * @build: driver version build number
+ * @sub: driver version sub build number
+ * @len: unused
+ * @driver_ver: unused
*
- * Sends driver version number to firmware through the manageability
- * block. On success return IXGBE_SUCCESS
- * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
- * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ * Sends driver version number to firmware through the manageability
+ * block. On success return IXGBE_SUCCESS
+ * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
**/
s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
- u8 build, u8 sub)
+ u8 build, u8 sub, u16 len,
+ const char *driver_ver)
{
struct ixgbe_hic_drv_info fw_cmd;
int i;
s32 ret_val = IXGBE_SUCCESS;
DEBUGFUNC("ixgbe_set_fw_drv_ver_generic");
+ UNREFERENCED_2PARAMETER(len, driver_ver);
fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
fw_cmd.ver_build = build;
fw_cmd.ver_sub = sub;
fw_cmd.hdr.checksum = 0;
- fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
- (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
fw_cmd.pad = 0;
fw_cmd.pad2 = 0;
+ fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
+ (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
rxpktsize <<= IXGBE_RXPBSIZE_SHIFT;
for (; i < (num_pb / 2); i++)
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
- /* Fall through to configure remaining packet buffers */
+ /* fall through - configure remaining packet buffers */
case PBA_STRATEGY_EQUAL:
rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT;
for (; i < num_pb; i++)
};
/**
- * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
- * @hw: pointer to hardware structure
- * @data: pointer to the thermal sensor data structure
+ * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
*
- * Returns the thermal sensor data structure
+ * Returns the thermal sensor data structure
**/
s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
- * @hw: pointer to hardware structure
+ * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
*
- * Inits the thermal sensor thresholds according to the NVM map
- * and save off the threshold and location values into mac.thermal_sensor_data
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
**/
s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
{
return IXGBE_NOT_IMPLEMENTED;
}
+/**
+ * ixgbe_get_orom_version - Return option ROM from EEPROM
+ *
+ * @hw: pointer to hardware structure
+ * @nvm_ver: pointer to output structure
+ *
+ * if valid option ROM version, nvm_ver->or_valid set to true
+ * else nvm_ver->or_valid is false.
+ **/
+void ixgbe_get_orom_version(struct ixgbe_hw *hw,
+ struct ixgbe_nvm_version *nvm_ver)
+{
+ u16 offset, eeprom_cfg_blkh, eeprom_cfg_blkl;
+
+ nvm_ver->or_valid = false;
+ /* Option Rom may or may not be present. Start with pointer */
+ hw->eeprom.ops.read(hw, NVM_OROM_OFFSET, &offset);
+
+ /* make sure offset is valid */
+ if ((offset == 0x0) || (offset == NVM_INVALID_PTR))
+ return;
+
+ hw->eeprom.ops.read(hw, offset + NVM_OROM_BLK_HI, &eeprom_cfg_blkh);
+ hw->eeprom.ops.read(hw, offset + NVM_OROM_BLK_LOW, &eeprom_cfg_blkl);
+
+ /* option rom exists and is valid */
+ if ((eeprom_cfg_blkl | eeprom_cfg_blkh) == 0x0 ||
+ eeprom_cfg_blkl == NVM_VER_INVALID ||
+ eeprom_cfg_blkh == NVM_VER_INVALID)
+ return;
+
+ nvm_ver->or_valid = true;
+ nvm_ver->or_major = eeprom_cfg_blkl >> NVM_OROM_SHIFT;
+ nvm_ver->or_build = (eeprom_cfg_blkl << NVM_OROM_SHIFT) |
+ (eeprom_cfg_blkh >> NVM_OROM_SHIFT);
+ nvm_ver->or_patch = eeprom_cfg_blkh & NVM_OROM_PATCH_MASK;
+}
+
+/**
+ * ixgbe_get_oem_prod_version - Return OEM Product version
+ *
+ * @hw: pointer to hardware structure
+ * @nvm_ver: pointer to output structure
+ *
+ * if valid OEM product version, nvm_ver->oem_valid set to true
+ * else nvm_ver->oem_valid is false.
+ **/
+void ixgbe_get_oem_prod_version(struct ixgbe_hw *hw,
+ struct ixgbe_nvm_version *nvm_ver)
+{
+ u16 rel_num, prod_ver, mod_len, cap, offset;
+
+ nvm_ver->oem_valid = false;
+ hw->eeprom.ops.read(hw, NVM_OEM_PROD_VER_PTR, &offset);
+
+ /* Return is offset to OEM Product Version block is invalid */
+ if (offset == 0x0 || offset == NVM_INVALID_PTR)
+ return;
+
+ /* Read product version block */
+ hw->eeprom.ops.read(hw, offset, &mod_len);
+ hw->eeprom.ops.read(hw, offset + NVM_OEM_PROD_VER_CAP_OFF, &cap);
+
+ /* Return if OEM product version block is invalid */
+ if (mod_len != NVM_OEM_PROD_VER_MOD_LEN ||
+ (cap & NVM_OEM_PROD_VER_CAP_MASK) != 0x0)
+ return;
+
+ hw->eeprom.ops.read(hw, offset + NVM_OEM_PROD_VER_OFF_L, &prod_ver);
+ hw->eeprom.ops.read(hw, offset + NVM_OEM_PROD_VER_OFF_H, &rel_num);
+
+ /* Return if version is invalid */
+ if ((rel_num | prod_ver) == 0x0 ||
+ rel_num == NVM_VER_INVALID || prod_ver == NVM_VER_INVALID)
+ return;
+
+ nvm_ver->oem_major = prod_ver >> NVM_VER_SHIFT;
+ nvm_ver->oem_minor = prod_ver & NVM_VER_MASK;
+ nvm_ver->oem_release = rel_num;
+ nvm_ver->oem_valid = true;
+}
+
+/**
+ * ixgbe_get_etk_id - Return Etrack ID from EEPROM
+ *
+ * @hw: pointer to hardware structure
+ * @nvm_ver: pointer to output structure
+ *
+ * word read errors will return 0xFFFF
+ **/
+void ixgbe_get_etk_id(struct ixgbe_hw *hw, struct ixgbe_nvm_version *nvm_ver)
+{
+ u16 etk_id_l, etk_id_h;
+
+ if (hw->eeprom.ops.read(hw, NVM_ETK_OFF_LOW, &etk_id_l))
+ etk_id_l = NVM_VER_INVALID;
+ if (hw->eeprom.ops.read(hw, NVM_ETK_OFF_HI, &etk_id_h))
+ etk_id_h = NVM_VER_INVALID;
+
+ /* The word order for the version format is determined by high order
+ * word bit 15.
+ */
+ if ((etk_id_h & NVM_ETK_VALID) == 0) {
+ nvm_ver->etk_id = etk_id_h;
+ nvm_ver->etk_id |= (etk_id_l << NVM_ETK_SHIFT);
+ } else {
+ nvm_ver->etk_id = etk_id_l;
+ nvm_ver->etk_id |= (etk_id_h << NVM_ETK_SHIFT);
+ }
+}
+
/**
* ixgbe_dcb_get_rtrup2tc_generic - read rtrup2tc reg
return false;
fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw));
- fwsm &= IXGBE_FWSM_MODE_MASK;
- return fwsm == IXGBE_FWSM_FW_MODE_PT;
+
+ return !!(fwsm & IXGBE_FWSM_FW_MODE_PT);
}
/**
}
/**
- * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
- * Set the link speed in the MAC and/or PHY register and restarts link.
+ * Set the link speed in the MAC and/or PHY register and restarts link.
**/
s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
speedcnt++;
highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
- /* If we already have link at this speed, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, false);
- if (status != IXGBE_SUCCESS)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
- goto out;
-
/* Set the module link speed */
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber:
ixgbe_flap_tx_laser(hw);
/* Wait for the controller to acquire link. Per IEEE 802.3ap,
- * Section 73.10.2, we may have to wait up to 500ms if KR is
+ * Section 73.10.2, we may have to wait up to 1000ms if KR is
* attempted. 82599 uses the same timing for 10g SFI.
*/
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < 10; i++) {
/* Wait for the link partner to also set speed */
msec_delay(100);
if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
- /* If we already have link at this speed, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, false);
- if (status != IXGBE_SUCCESS)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
- goto out;
-
/* Set the module link speed */
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber:
}
/**
- * ixgbe_set_soft_rate_select_speed - Set module link speed
- * @hw: pointer to hardware structure
- * @speed: link speed to set
+ * ixgbe_set_soft_rate_select_speed - Set module link speed
+ * @hw: pointer to hardware structure
+ * @speed: link speed to set
*
- * Set module link speed via the soft rate select.
+ * Set module link speed via the soft rate select.
*/
void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw,
ixgbe_link_speed speed)