-/*******************************************************************************
-
-Copyright (c) 2001-2015, Intel Corporation
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- 3. Neither the name of the Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-***************************************************************************/
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2020 Intel Corporation
+ */
#include "ixgbe_api.h"
#include "ixgbe_common.h"
STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw);
STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw);
-STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
+STATIC void ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
-STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
+STATIC void ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
*/
STATIC s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
{
- s32 status;
-
- status = ixgbe_clock_in_i2c_byte(hw, byte);
- if (status)
- return status;
+ ixgbe_clock_in_i2c_byte(hw, byte);
/* ACK */
return ixgbe_clock_out_i2c_bit(hw, false);
}
/**
* ixgbe_ones_comp_byte_add - Perform one's complement addition
- * @add1 - addend 1
- * @add2 - addend 2
+ * @add1: addend 1
+ * @add2: addend 2
*
* Returns one's complement 8-bit sum.
*/
*
* Returns an error code on error.
*/
-STATIC s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
- u16 reg, u16 *val, bool lock)
+s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
+ u16 *val, bool lock)
{
u32 swfw_mask = hw->phy.phy_semaphore_mask;
- int max_retry = 10;
+ int max_retry = 3;
int retry = 0;
u8 csum_byte;
u8 high_bits;
u8 reg_high;
u8 csum;
- if (hw->mac.type >= ixgbe_mac_X550)
- max_retry = 3;
reg_high = ((reg >> 7) & 0xFE) | 1; /* Indicate read combined */
csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
csum = ~csum;
if (ixgbe_in_i2c_byte_ack(hw, &low_bits))
goto fail;
/* Get csum */
- if (ixgbe_clock_in_i2c_byte(hw, &csum_byte))
- goto fail;
+ ixgbe_clock_in_i2c_byte(hw, &csum_byte);
/* NACK */
if (ixgbe_clock_out_i2c_bit(hw, false))
goto fail;
ixgbe_i2c_bus_clear(hw);
if (lock)
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
- retry++;
if (retry < max_retry)
DEBUGOUT("I2C byte read combined error - Retrying.\n");
else
DEBUGOUT("I2C byte read combined error.\n");
- } while (retry < max_retry);
+ retry++;
+ } while (retry <= max_retry);
return IXGBE_ERR_I2C;
}
-/**
- * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
- * @hw: pointer to the hardware structure
- * @addr: I2C bus address to read from
- * @reg: I2C device register to read from
- * @val: pointer to location to receive read value
- *
- * Returns an error code on error.
- **/
-STATIC s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
- u16 reg, u16 *val)
-{
- return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
-}
-
-/**
- * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation
- * @hw: pointer to the hardware structure
- * @addr: I2C bus address to read from
- * @reg: I2C device register to read from
- * @val: pointer to location to receive read value
- *
- * Returns an error code on error.
- **/
-STATIC s32
-ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
- u16 reg, u16 *val)
-{
- return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
-}
-
/**
* ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
* @hw: pointer to the hardware structure
*
* Returns an error code on error.
*/
-STATIC s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
- u16 reg, u16 val, bool lock)
+s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
+ u16 val, bool lock)
{
u32 swfw_mask = hw->phy.phy_semaphore_mask;
int max_retry = 1;
ixgbe_i2c_bus_clear(hw);
if (lock)
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
- retry++;
if (retry < max_retry)
DEBUGOUT("I2C byte write combined error - Retrying.\n");
else
DEBUGOUT("I2C byte write combined error.\n");
- } while (retry < max_retry);
+ retry++;
+ } while (retry <= max_retry);
return IXGBE_ERR_I2C;
}
/**
- * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
- * @hw: pointer to the hardware structure
- * @addr: I2C bus address to write to
- * @reg: I2C device register to write to
- * @val: value to write
- *
- * Returns an error code on error.
- **/
-STATIC s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
- u8 addr, u16 reg, u16 val)
-{
- return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
-}
-
-/**
- * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation
+ * ixgbe_init_phy_ops_generic - Inits PHY function ptrs
* @hw: pointer to the hardware structure
- * @addr: I2C bus address to write to
- * @reg: I2C device register to write to
- * @val: value to write
*
- * Returns an error code on error.
- **/
-STATIC s32
-ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
- u8 addr, u16 reg, u16 val)
-{
- return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
-}
-
-/**
- * ixgbe_init_phy_ops_generic - Inits PHY function ptrs
- * @hw: pointer to the hardware structure
- *
- * Initialize the function pointers.
+ * Initialize the function pointers.
**/
s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw)
{
phy->ops.i2c_bus_clear = ixgbe_i2c_bus_clear;
phy->ops.identify_sfp = ixgbe_identify_module_generic;
phy->sfp_type = ixgbe_sfp_type_unknown;
- phy->ops.read_i2c_combined = ixgbe_read_i2c_combined_generic;
- phy->ops.write_i2c_combined = ixgbe_write_i2c_combined_generic;
- phy->ops.read_i2c_combined_unlocked =
- ixgbe_read_i2c_combined_generic_unlocked;
- phy->ops.write_i2c_combined_unlocked =
- ixgbe_write_i2c_combined_generic_unlocked;
phy->ops.read_i2c_byte_unlocked = ixgbe_read_i2c_byte_generic_unlocked;
phy->ops.write_i2c_byte_unlocked =
ixgbe_write_i2c_byte_generic_unlocked;
}
/**
- * ixgbe_identify_phy_generic - Get physical layer module
- * @hw: pointer to hardware structure
+ * ixgbe_probe_phy - Probe a single address for a PHY
+ * @hw: pointer to hardware structure
+ * @phy_addr: PHY address to probe
+ *
+ * Returns true if PHY found
+ */
+static bool ixgbe_probe_phy(struct ixgbe_hw *hw, u16 phy_addr)
+{
+ u16 ext_ability = 0;
+
+ if (!ixgbe_validate_phy_addr(hw, phy_addr)) {
+ DEBUGOUT1("Unable to validate PHY address 0x%04X\n",
+ phy_addr);
+ return false;
+ }
+
+ if (ixgbe_get_phy_id(hw))
+ return false;
+
+ hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+ if (ext_ability &
+ (IXGBE_MDIO_PHY_10GBASET_ABILITY |
+ IXGBE_MDIO_PHY_1000BASET_ABILITY))
+ hw->phy.type = ixgbe_phy_cu_unknown;
+ else
+ hw->phy.type = ixgbe_phy_generic;
+ }
+
+ return true;
+}
+
+/**
+ * ixgbe_identify_phy_generic - Get physical layer module
+ * @hw: pointer to hardware structure
*
- * Determines the physical layer module found on the current adapter.
+ * Determines the physical layer module found on the current adapter.
**/
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
{
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
- u32 phy_addr;
- u16 ext_ability = 0;
+ u16 phy_addr;
DEBUGFUNC("ixgbe_identify_phy_generic");
hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
}
- if (hw->phy.type == ixgbe_phy_unknown) {
- for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
- if (ixgbe_validate_phy_addr(hw, phy_addr)) {
- hw->phy.addr = phy_addr;
- ixgbe_get_phy_id(hw);
- hw->phy.type =
- ixgbe_get_phy_type_from_id(hw->phy.id);
-
- if (hw->phy.type == ixgbe_phy_unknown) {
- hw->phy.ops.read_reg(hw,
- IXGBE_MDIO_PHY_EXT_ABILITY,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &ext_ability);
- if (ext_ability &
- (IXGBE_MDIO_PHY_10GBASET_ABILITY |
- IXGBE_MDIO_PHY_1000BASET_ABILITY))
- hw->phy.type =
- ixgbe_phy_cu_unknown;
- else
- hw->phy.type =
- ixgbe_phy_generic;
- }
+ if (hw->phy.type != ixgbe_phy_unknown)
+ return IXGBE_SUCCESS;
- status = IXGBE_SUCCESS;
- break;
- }
- }
+ if (hw->phy.nw_mng_if_sel) {
+ phy_addr = (hw->phy.nw_mng_if_sel &
+ IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >>
+ IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT;
+ if (ixgbe_probe_phy(hw, phy_addr))
+ return IXGBE_SUCCESS;
+ else
+ return IXGBE_ERR_PHY_ADDR_INVALID;
+ }
- /* Certain media types do not have a phy so an address will not
- * be found and the code will take this path. Caller has to
- * decide if it is an error or not.
- */
- if (status != IXGBE_SUCCESS) {
- hw->phy.addr = 0;
+ for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ if (ixgbe_probe_phy(hw, phy_addr)) {
+ status = IXGBE_SUCCESS;
+ break;
}
- } else {
- status = IXGBE_SUCCESS;
}
+ /* Certain media types do not have a phy so an address will not
+ * be found and the code will take this path. Caller has to
+ * decide if it is an error or not.
+ */
+ if (status != IXGBE_SUCCESS)
+ hw->phy.addr = 0;
+
return status;
}
}
/**
- * ixgbe_validate_phy_addr - Determines phy address is valid
- * @hw: pointer to hardware structure
+ * ixgbe_validate_phy_addr - Determines phy address is valid
+ * @hw: pointer to hardware structure
+ * @phy_addr: PHY address
*
**/
bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
if (phy_id != 0xFFFF && phy_id != 0x0)
valid = true;
+ DEBUGOUT1("PHY ID HIGH is 0x%04X\n", phy_id);
+
return valid;
}
/**
- * ixgbe_get_phy_id - Get the phy type
- * @hw: pointer to hardware structure
+ * ixgbe_get_phy_id - Get the phy type
+ * @hw: pointer to hardware structure
*
**/
s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
}
+ DEBUGOUT2("PHY_ID_HIGH 0x%04X, PHY_ID_LOW 0x%04X\n",
+ phy_id_high, phy_id_low);
+
return status;
}
/**
- * ixgbe_get_phy_type_from_id - Get the phy type
- * @hw: pointer to hardware structure
+ * ixgbe_get_phy_type_from_id - Get the phy type
+ * @phy_id: PHY ID information
*
**/
enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
case TN1010_PHY_ID:
phy_type = ixgbe_phy_tn;
break;
- case X550_PHY_ID:
+ case X550_PHY_ID2:
+ case X550_PHY_ID3:
case X540_PHY_ID:
phy_type = ixgbe_phy_aq;
break;
phy_type = ixgbe_phy_nl;
break;
case X557_PHY_ID:
+ case X557_PHY_ID2:
phy_type = ixgbe_phy_x550em_ext_t;
break;
+ case IXGBE_M88E1500_E_PHY_ID:
+ case IXGBE_M88E1543_E_PHY_ID:
+ phy_type = ixgbe_phy_ext_1g_t;
+ break;
default:
phy_type = ixgbe_phy_unknown;
break;
}
-
- DEBUGOUT1("phy type found is %d\n", phy_type);
return phy_type;
}
/**
- * ixgbe_reset_phy_generic - Performs a PHY reset
- * @hw: pointer to hardware structure
+ * ixgbe_reset_phy_generic - Performs a PHY reset
+ * @hw: pointer to hardware structure
**/
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
{
*/
for (i = 0; i < 30; i++) {
msec_delay(100);
- hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
- IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl);
- if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) {
- usec_delay(2);
- break;
+ if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &ctrl);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (ctrl & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
+ usec_delay(2);
+ break;
+ }
+ } else {
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ &ctrl);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) {
+ usec_delay(2);
+ break;
+ }
}
}
}
/**
- * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
- * the SWFW lock
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit address of PHY register to read
- * @phy_data: Pointer to read data from PHY register
+ * ixgbe_restart_auto_neg - Restart auto negotiation on the PHY
+ * @hw: pointer to hardware structure
+ **/
+void ixgbe_restart_auto_neg(struct ixgbe_hw *hw)
+{
+ u16 autoneg_reg;
+
+ /* Check if PHY reset is blocked by MNG FW */
+ if (ixgbe_check_reset_blocked(hw))
+ return;
+
+ /* Restart PHY auto-negotiation. */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+ autoneg_reg |= IXGBE_MII_RESTART;
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+}
+
+/**
+ * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
+ * the SWFW lock
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: 5 bit device type
+ * @phy_data: Pointer to read data from PHY register
**/
s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
- u16 *phy_data)
+ u16 *phy_data)
{
u32 i, data, command;
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
+ break;
}
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address command did not complete.\n");
+ DEBUGOUT("PHY address command did not complete, returning IXGBE_ERR_PHY\n");
return IXGBE_ERR_PHY;
}
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY read command didn't complete\n");
+ DEBUGOUT("PHY read command didn't complete, returning IXGBE_ERR_PHY\n");
return IXGBE_ERR_PHY;
}
}
/**
- * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
- * using the SWFW lock - this function is needed in most cases
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit address of PHY register to read
- * @phy_data: Pointer to read data from PHY register
+ * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ * using the SWFW lock - this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: 5 bit device type
+ * @phy_data: Pointer to read data from PHY register
**/
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 *phy_data)
DEBUGFUNC("ixgbe_read_phy_reg_generic");
- if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
- status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type,
- phy_data);
- hw->mac.ops.release_swfw_sync(hw, gssr);
- } else {
- status = IXGBE_ERR_SWFW_SYNC;
- }
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data);
+
+ hw->mac.ops.release_swfw_sync(hw, gssr);
return status;
}
/**
- * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
- * without SWFW lock
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 5 bit device type
- * @phy_data: Data to write to the PHY register
+ * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
+ * without SWFW lock
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
**/
s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 phy_data)
}
/**
- * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
- * using SWFW lock- this function is needed in most cases
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 5 bit device type
- * @phy_data: Data to write to the PHY register
+ * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ * using SWFW lock- this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
**/
s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 phy_data)
DEBUGFUNC("ixgbe_write_phy_reg_generic");
if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
- status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type,
+ status = hw->phy.ops.write_reg_mdi(hw, reg_addr, device_type,
phy_data);
hw->mac.ops.release_swfw_sync(hw, gssr);
} else {
}
/**
- * ixgbe_setup_phy_link_generic - Set and restart auto-neg
- * @hw: pointer to hardware structure
+ * ixgbe_setup_phy_link_generic - Set and restart auto-neg
+ * @hw: pointer to hardware structure
*
- * Restart auto-negotiation and PHY and waits for completion.
+ * Restart auto-negotiation and PHY and waits for completion.
**/
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
{
ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
- if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
- /* Set or unset auto-negotiation 10G advertisement */
- hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
- autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
-
- hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
- }
-
- if (hw->mac.type == ixgbe_mac_X550) {
- if (speed & IXGBE_LINK_SPEED_5GB_FULL) {
- /* Set or unset auto-negotiation 1G advertisement */
- hw->phy.ops.read_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised &
- IXGBE_LINK_SPEED_5GB_FULL)
- autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
-
- hw->phy.ops.write_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
- }
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
- if (speed & IXGBE_LINK_SPEED_2_5GB_FULL) {
- /* Set or unset auto-negotiation 1G advertisement */
- hw->phy.ops.read_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised &
- IXGBE_LINK_SPEED_2_5GB_FULL)
- autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
-
- hw->phy.ops.write_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
- }
- }
+ autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
+ if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) &&
+ (speed & IXGBE_LINK_SPEED_10GB_FULL))
+ autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
- if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
- /* Set or unset auto-negotiation 1G advertisement */
- hw->phy.ops.read_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
+ hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
- autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
- autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
- hw->phy.ops.write_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
+ if (hw->mac.type == ixgbe_mac_X550) {
+ /* Set or unset auto-negotiation 5G advertisement */
+ autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
+ if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_5GB_FULL) &&
+ (speed & IXGBE_LINK_SPEED_5GB_FULL))
+ autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
+
+ /* Set or unset auto-negotiation 2.5G advertisement */
+ autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
+ if ((hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_2_5GB_FULL) &&
+ (speed & IXGBE_LINK_SPEED_2_5GB_FULL))
+ autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
}
- if (speed & IXGBE_LINK_SPEED_100_FULL) {
- /* Set or unset auto-negotiation 100M advertisement */
- hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE |
- IXGBE_MII_100BASE_T_ADVERTISE_HALF);
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
- autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
+ /* Set or unset auto-negotiation 1G advertisement */
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+ if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) &&
+ (speed & IXGBE_LINK_SPEED_1GB_FULL))
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
- hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
- }
-
- /* Blocked by MNG FW so don't reset PHY */
- if (ixgbe_check_reset_blocked(hw))
- return status;
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
- /* Restart PHY auto-negotiation. */
- hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
- autoneg_reg |= IXGBE_MII_RESTART;
+ autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE |
+ IXGBE_MII_100BASE_T_ADVERTISE_HALF);
+ if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) &&
+ (speed & IXGBE_LINK_SPEED_100_FULL))
+ autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
- hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ ixgbe_restart_auto_neg(hw);
return status;
}
/**
- * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
- * @hw: pointer to hardware structure
- * @speed: new link speed
+ * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: unused
**/
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
if (speed & IXGBE_LINK_SPEED_100_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+ if (speed & IXGBE_LINK_SPEED_10_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10_FULL;
+
/* Setup link based on the new speed settings */
- hw->phy.ops.setup_link(hw);
+ ixgbe_setup_phy_link(hw);
return IXGBE_SUCCESS;
}
/**
- * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: boolean auto-negotiation value
+ * ixgbe_get_copper_speeds_supported - Get copper link speeds from phy
+ * @hw: pointer to hardware structure
*
- * Determines the supported link capabilities by reading the PHY auto
- * negotiation register.
+ * Determines the supported link capabilities by reading the PHY auto
+ * negotiation register.
**/
-s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg)
+static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw)
{
s32 status;
u16 speed_ability;
- DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
-
- *speed = 0;
- *autoneg = true;
-
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
&speed_ability);
+ if (status)
+ return status;
- if (status == IXGBE_SUCCESS) {
- if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
- if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
- *speed |= IXGBE_LINK_SPEED_100_FULL;
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL;
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550EM_x:
+ case ixgbe_mac_X550EM_a:
+ hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL;
+ break;
+ default:
+ break;
}
- /* Internal PHY does not support 100 Mbps */
- if (hw->mac.type == ixgbe_mac_X550EM_x)
- *speed &= ~IXGBE_LINK_SPEED_100_FULL;
+ return status;
+}
- if (hw->mac.type == ixgbe_mac_X550) {
- *speed |= IXGBE_LINK_SPEED_2_5GB_FULL;
- *speed |= IXGBE_LINK_SPEED_5GB_FULL;
- }
+/**
+ * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ **/
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
+
+ *autoneg = true;
+ if (!hw->phy.speeds_supported)
+ status = ixgbe_get_copper_speeds_supported(hw);
+ *speed = hw->phy.speeds_supported;
return status;
}
/**
- * ixgbe_check_phy_link_tnx - Determine link and speed status
- * @hw: pointer to hardware structure
+ * ixgbe_check_phy_link_tnx - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: current link speed
+ * @link_up: true is link is up, false otherwise
*
- * Reads the VS1 register to determine if link is up and the current speed for
- * the PHY.
+ * Reads the VS1 register to determine if link is up and the current speed for
+ * the PHY.
**/
s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
bool *link_up)
autoneg_reg);
}
- /* Blocked by MNG FW so don't reset PHY */
- if (ixgbe_check_reset_blocked(hw))
- return status;
-
- /* Restart PHY auto-negotiation. */
- hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
-
- autoneg_reg |= IXGBE_MII_RESTART;
-
- hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
-
+ ixgbe_restart_auto_neg(hw);
return status;
}
/**
- * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
- * @hw: pointer to hardware structure
- * @firmware_version: pointer to the PHY Firmware Version
+ * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
**/
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
u16 *firmware_version)
}
/**
- * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
- * @hw: pointer to hardware structure
- * @firmware_version: pointer to the PHY Firmware Version
+ * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
**/
s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
u16 *firmware_version)
}
/**
- * ixgbe_reset_phy_nl - Performs a PHY reset
- * @hw: pointer to hardware structure
+ * ixgbe_reset_phy_nl - Performs a PHY reset
+ * @hw: pointer to hardware structure
**/
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_identify_module_generic - Identifies module type
- * @hw: pointer to hardware structure
+ * ixgbe_identify_module_generic - Identifies module type
+ * @hw: pointer to hardware structure
*
- * Determines HW type and calls appropriate function.
+ * Determines HW type and calls appropriate function.
**/
s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_identify_sfp_module_generic - Identifies SFP modules
- * @hw: pointer to hardware structure
+ * ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ * @hw: pointer to hardware structure
*
- * Searches for and identifies the SFP module and assigns appropriate PHY type.
+ * Searches for and identifies the SFP module and assigns appropriate PHY type.
**/
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
{
else
hw->phy.sfp_type =
ixgbe_sfp_type_1g_lx_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASELHA_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_lha_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_lha_core1;
} else {
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
}
if (comp_codes_10g == 0 &&
!(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lha_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lha_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
!(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lha_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lha_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
status = IXGBE_SUCCESS;
} else {
if (hw->allow_unsupported_sfp == true) {
- EWARN(hw, "WARNING: Intel (R) Network "
- "Connections are quality tested "
- "using Intel (R) Ethernet Optics."
- " Using untested modules is not "
- "supported and may cause unstable"
- " operation or damage to the "
- "module or the adapter. Intel "
- "Corporation is not responsible "
- "for any harm caused by using "
- "untested modules.\n", status);
+ EWARN(hw,
+ "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. "
+ "Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. "
+ "Intel Corporation is not responsible for any harm caused by using untested modules.\n");
status = IXGBE_SUCCESS;
} else {
DEBUGOUT("SFP+ module not supported\n");
}
/**
- * ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
- * @hw: pointer to hardware structure
+ * ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
+ * @hw: pointer to hardware structure
*
- * Determines physical layer capabilities of the current SFP.
+ * Determines physical layer capabilities of the current SFP.
*/
-s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
+u64 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
{
- u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
u8 comp_codes_10g = 0;
u8 comp_codes_1g = 0;
}
/**
- * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
- * @hw: pointer to hardware structure
+ * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ * @hw: pointer to hardware structure
*
- * Searches for and identifies the QSFP module and assigns appropriate PHY type
+ * Searches for and identifies the QSFP module and assigns appropriate PHY type
**/
s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
{
status = IXGBE_SUCCESS;
} else {
if (hw->allow_unsupported_sfp == true) {
- EWARN(hw, "WARNING: Intel (R) Network "
- "Connections are quality tested "
- "using Intel (R) Ethernet Optics."
- " Using untested modules is not "
- "supported and may cause unstable"
- " operation or damage to the "
- "module or the adapter. Intel "
- "Corporation is not responsible "
- "for any harm caused by using "
- "untested modules.\n", status);
+ EWARN(hw,
+ "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. "
+ "Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. "
+ "Intel Corporation is not responsible for any harm caused by using untested modules.\n");
status = IXGBE_SUCCESS;
} else {
DEBUGOUT("QSFP module not supported\n");
return IXGBE_ERR_SFP_NOT_PRESENT;
}
-
/**
- * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
- * @hw: pointer to hardware structure
- * @list_offset: offset to the SFP ID list
- * @data_offset: offset to the SFP data block
+ * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
+ * @hw: pointer to hardware structure
+ * @list_offset: offset to the SFP ID list
+ * @data_offset: offset to the SFP data block
*
- * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
- * so it returns the offsets to the phy init sequence block.
+ * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
+ * so it returns the offsets to the phy init sequence block.
**/
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
u16 *list_offset,
*/
if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_lha_core0 ||
sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
sfp_type == ixgbe_sfp_type_1g_sx_core0)
sfp_type = ixgbe_sfp_type_srlr_core0;
else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_lha_core1 ||
sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
sfp_type == ixgbe_sfp_type_1g_sx_core1)
sfp_type = ixgbe_sfp_type_srlr_core1;
}
/**
- * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to read
- * @eeprom_data: value read
+ * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
*
- * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
**/
s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data)
}
/**
- * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset at address 0xA2
- * @eeprom_data: value read
+ * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset at address 0xA2
+ * @sff8472_data: value read
*
- * Performs byte read operation to SFP module's SFF-8472 data over I2C
+ * Performs byte read operation to SFP module's SFF-8472 data over I2C
**/
STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 *sff8472_data)
}
/**
- * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to write
- * @eeprom_data: value to write
+ * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to write
+ * @eeprom_data: value to write
*
- * Performs byte write operation to SFP module's EEPROM over I2C interface.
+ * Performs byte write operation to SFP module's EEPROM over I2C interface.
**/
s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 eeprom_data)
}
/**
- * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to read
- * @data: value read
- * @lock: true if to take and release semaphore
+ * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: address to read from
+ * @data: value read
+ * @lock: true if to take and release semaphore
*
- * Performs byte read operation to SFP module's EEPROM over I2C interface at
- * a specified device address.
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
**/
STATIC s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data, bool lock)
if (status != IXGBE_SUCCESS)
goto fail;
- status = ixgbe_clock_in_i2c_byte(hw, data);
- if (status != IXGBE_SUCCESS)
- goto fail;
+ ixgbe_clock_in_i2c_byte(hw, data);
status = ixgbe_clock_out_i2c_bit(hw, nack);
if (status != IXGBE_SUCCESS)
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
msec_delay(100);
}
- retry++;
if (retry < max_retry)
DEBUGOUT("I2C byte read error - Retrying.\n");
else
DEBUGOUT("I2C byte read error.\n");
-
- } while (retry < max_retry);
+ retry++;
+ } while (retry <= max_retry);
return status;
}
/**
- * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to read
- * @data: value read
+ * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: address to read from
+ * @data: value read
*
- * Performs byte read operation to SFP module's EEPROM over I2C interface at
- * a specified device address.
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
**/
s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data)
}
/**
- * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to read
- * @data: value read
+ * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: address to read from
+ * @data: value read
*
- * Performs byte read operation to SFP module's EEPROM over I2C interface at
- * a specified device address.
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
**/
s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data)
}
/**
- * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to write
- * @data: value to write
- * @lock: true if to take and release semaphore
+ * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: address to write to
+ * @data: value to write
+ * @lock: true if to take and release semaphore
*
- * Performs byte write operation to SFP module's EEPROM over I2C interface at
- * a specified device address.
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
**/
STATIC s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 data, bool lock)
fail:
ixgbe_i2c_bus_clear(hw);
- retry++;
if (retry < max_retry)
DEBUGOUT("I2C byte write error - Retrying.\n");
else
DEBUGOUT("I2C byte write error.\n");
- } while (retry < max_retry);
+ retry++;
+ } while (retry <= max_retry);
if (lock)
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
}
/**
- * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to write
- * @data: value to write
+ * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: address to write to
+ * @data: value to write
*
- * Performs byte write operation to SFP module's EEPROM over I2C interface at
- * a specified device address.
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
**/
s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 data)
}
/**
- * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to write
- * @data: value to write
+ * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: address to write to
+ * @data: value to write
*
- * Performs byte write operation to SFP module's EEPROM over I2C interface at
- * a specified device address.
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
**/
s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 data)
}
/**
- * ixgbe_i2c_start - Sets I2C start condition
- * @hw: pointer to hardware structure
+ * ixgbe_i2c_start - Sets I2C start condition
+ * @hw: pointer to hardware structure
*
- * Sets I2C start condition (High -> Low on SDA while SCL is High)
- * Set bit-bang mode on X550 hardware.
+ * Sets I2C start condition (High -> Low on SDA while SCL is High)
+ * Set bit-bang mode on X550 hardware.
**/
STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_i2c_stop - Sets I2C stop condition
- * @hw: pointer to hardware structure
+ * ixgbe_i2c_stop - Sets I2C stop condition
+ * @hw: pointer to hardware structure
*
- * Sets I2C stop condition (Low -> High on SDA while SCL is High)
- * Disables bit-bang mode and negates data output enable on X550
- * hardware.
+ * Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ * Disables bit-bang mode and negates data output enable on X550
+ * hardware.
**/
STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
- * @hw: pointer to hardware structure
- * @data: data byte to clock in
+ * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte to clock in
*
- * Clocks in one byte data via I2C data/clock
+ * Clocks in one byte data via I2C data/clock
**/
-STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
+STATIC void ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
{
s32 i;
bool bit = 0;
ixgbe_clock_in_i2c_bit(hw, &bit);
*data |= bit << i;
}
-
- return IXGBE_SUCCESS;
}
/**
- * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
- * @hw: pointer to hardware structure
- * @data: data byte clocked out
+ * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte clocked out
*
- * Clocks out one byte data via I2C data/clock
+ * Clocks out one byte data via I2C data/clock
**/
STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
{
}
/**
- * ixgbe_get_i2c_ack - Polls for I2C ACK
- * @hw: pointer to hardware structure
+ * ixgbe_get_i2c_ack - Polls for I2C ACK
+ * @hw: pointer to hardware structure
*
- * Clocks in/out one bit via I2C data/clock
+ * Clocks in/out one bit via I2C data/clock
**/
STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
- * @hw: pointer to hardware structure
- * @data: read data value
+ * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: read data value
*
- * Clocks in one bit via I2C data/clock
+ * Clocks in one bit via I2C data/clock
**/
-STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
+STATIC void ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
{
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
/* Minimum low period of clock is 4.7 us */
usec_delay(IXGBE_I2C_T_LOW);
-
- return IXGBE_SUCCESS;
}
/**
- * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
- * @hw: pointer to hardware structure
- * @data: data value to write
+ * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: data value to write
*
- * Clocks out one bit via I2C data/clock
+ * Clocks out one bit via I2C data/clock
**/
STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
{
}
/**
- * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
- * @hw: pointer to hardware structure
- * @i2cctl: Current value of I2CCTL register
+ * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
*
- * Raises the I2C clock line '0'->'1'
- * Negates the I2C clock output enable on X550 hardware.
+ * Raises the I2C clock line '0'->'1'
+ * Negates the I2C clock output enable on X550 hardware.
**/
STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
{
}
/**
- * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
- * @hw: pointer to hardware structure
- * @i2cctl: Current value of I2CCTL register
+ * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
*
- * Lowers the I2C clock line '1'->'0'
- * Asserts the I2C clock output enable on X550 hardware.
+ * Lowers the I2C clock line '1'->'0'
+ * Asserts the I2C clock output enable on X550 hardware.
**/
STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
{
}
/**
- * ixgbe_set_i2c_data - Sets the I2C data bit
- * @hw: pointer to hardware structure
- * @i2cctl: Current value of I2CCTL register
- * @data: I2C data value (0 or 1) to set
+ * ixgbe_set_i2c_data - Sets the I2C data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ * @data: I2C data value (0 or 1) to set
*
- * Sets the I2C data bit
- * Asserts the I2C data output enable on X550 hardware.
+ * Sets the I2C data bit
+ * Asserts the I2C data output enable on X550 hardware.
**/
STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
{
}
/**
- * ixgbe_get_i2c_data - Reads the I2C SDA data bit
- * @hw: pointer to hardware structure
- * @i2cctl: Current value of I2CCTL register
+ * ixgbe_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
*
- * Returns the I2C data bit value
- * Negates the I2C data output enable on X550 hardware.
+ * Returns the I2C data bit value
+ * Negates the I2C data output enable on X550 hardware.
**/
STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
{
}
/**
- * ixgbe_i2c_bus_clear - Clears the I2C bus
- * @hw: pointer to hardware structure
+ * ixgbe_i2c_bus_clear - Clears the I2C bus
+ * @hw: pointer to hardware structure
*
- * Clears the I2C bus by sending nine clock pulses.
- * Used when data line is stuck low.
+ * Clears the I2C bus by sending nine clock pulses.
+ * Used when data line is stuck low.
**/
void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
- * @hw: pointer to hardware structure
+ * ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
+ * @hw: pointer to hardware structure
*
- * Checks if the LASI temp alarm status was triggered due to overtemp
+ * Checks if the LASI temp alarm status was triggered due to overtemp
**/
s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
{
u32 status;
u16 reg;
+ if (!on && ixgbe_mng_present(hw))
+ return 0;
+
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
®);
git.droids-corp.org / dpdk.git / blobdiff