#define TN1010_PHY_ID 0x00A19410
#define TNX_FW_REV 0xB
#define X540_PHY_ID 0x01540200
-#define X550_PHY_ID1 0x01540220
#define X550_PHY_ID2 0x01540223
#define X550_PHY_ID3 0x01540221
#define X557_PHY_ID 0x01540240
#define FW_INT_PHY_REQ_LEN 10
#define FW_INT_PHY_REQ_READ 0
#define FW_INT_PHY_REQ_WRITE 1
+#define FW_PHY_ACT_REQ_CMD 5
+#define FW_PHY_ACT_DATA_COUNT 4
+#define FW_PHY_ACT_REQ_LEN (4 + 4 * FW_PHY_ACT_DATA_COUNT)
+#define FW_PHY_ACT_INIT_PHY 1
+#define FW_PHY_ACT_SETUP_LINK 2
+#define FW_PHY_ACT_LINK_SPEED_10 (1u << 0)
+#define FW_PHY_ACT_LINK_SPEED_100 (1u << 1)
+#define FW_PHY_ACT_LINK_SPEED_1G (1u << 2)
+#define FW_PHY_ACT_LINK_SPEED_2_5G (1u << 3)
+#define FW_PHY_ACT_LINK_SPEED_5G (1u << 4)
+#define FW_PHY_ACT_LINK_SPEED_10G (1u << 5)
+#define FW_PHY_ACT_LINK_SPEED_20G (1u << 6)
+#define FW_PHY_ACT_LINK_SPEED_25G (1u << 7)
+#define FW_PHY_ACT_LINK_SPEED_40G (1u << 8)
+#define FW_PHY_ACT_LINK_SPEED_50G (1u << 9)
+#define FW_PHY_ACT_LINK_SPEED_100G (1u << 10)
+#define FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT 16
+#define FW_PHY_ACT_SETUP_LINK_PAUSE_MASK (3u << \
+ FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT)
+#define FW_PHY_ACT_SETUP_LINK_PAUSE_NONE 0u
+#define FW_PHY_ACT_SETUP_LINK_PAUSE_TX 1u
+#define FW_PHY_ACT_SETUP_LINK_PAUSE_RX 2u
+#define FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX 3u
+#define FW_PHY_ACT_SETUP_LINK_LP (1u << 18)
+#define FW_PHY_ACT_SETUP_LINK_HP (1u << 19)
+#define FW_PHY_ACT_SETUP_LINK_EEE (1u << 20)
+#define FW_PHY_ACT_SETUP_LINK_AN (1u << 22)
+#define FW_PHY_ACT_SETUP_LINK_RSP_DOWN (1u << 0)
+#define FW_PHY_ACT_GET_LINK_INFO 3
+#define FW_PHY_ACT_GET_LINK_INFO_EEE (1u << 19)
+#define FW_PHY_ACT_GET_LINK_INFO_FC_TX (1u << 20)
+#define FW_PHY_ACT_GET_LINK_INFO_FC_RX (1u << 21)
+#define FW_PHY_ACT_GET_LINK_INFO_POWER (1u << 22)
+#define FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE (1u << 24)
+#define FW_PHY_ACT_GET_LINK_INFO_TEMP (1u << 25)
+#define FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX (1u << 28)
+#define FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX (1u << 29)
+#define FW_PHY_ACT_FORCE_LINK_DOWN 4
+#define FW_PHY_ACT_FORCE_LINK_DOWN_OFF (1u << 0)
+#define FW_PHY_ACT_PHY_SW_RESET 5
+#define FW_PHY_ACT_PHY_HW_RESET 6
+#define FW_PHY_ACT_GET_PHY_INFO 7
+#define FW_PHY_ACT_UD_2 0x1002
+#define FW_PHY_ACT_UD_2_10G_KR_EEE (1u << 6)
+#define FW_PHY_ACT_UD_2_10G_KX4_EEE (1u << 5)
+#define FW_PHY_ACT_UD_2_1G_KX_EEE (1u << 4)
+#define FW_PHY_ACT_UD_2_10G_T_EEE (1u << 3)
+#define FW_PHY_ACT_UD_2_1G_T_EEE (1u << 2)
+#define FW_PHY_ACT_UD_2_100M_TX_EEE (1u << 1)
+#define FW_PHY_ACT_RETRIES 50
+#define FW_PHY_INFO_SPEED_MASK 0xFFFu
+#define FW_PHY_INFO_ID_HI_MASK 0xFFFF0000u
+#define FW_PHY_INFO_ID_LO_MASK 0x0000FFFFu
/* Host Interface Command Structures */
__be32 read_data;
};
+struct ixgbe_hic_phy_activity_req {
+ struct ixgbe_hic_hdr hdr;
+ u8 port_number;
+ u8 pad;
+ __le16 activity_id;
+ __be32 data[FW_PHY_ACT_DATA_COUNT];
+};
+
+struct ixgbe_hic_phy_activity_resp {
+ struct ixgbe_hic_hdr hdr;
+ __be32 data[FW_PHY_ACT_DATA_COUNT];
+};
+
#ifdef C99
#pragma pack(pop)
#else
#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
#define IXGBE_PHYSICAL_LAYER_1000BASE_SX 0x4000
+#define IXGBE_PHYSICAL_LAYER_10BASE_T 0x8000
/* Flow Control Data Sheet defined values
* Calculation and defines taken from 802.1bb Annex O
ixgbe_phy_qsfp_unknown,
ixgbe_phy_sfp_unsupported, /*Enforce bit set with unsupported module*/
ixgbe_phy_sgmii,
- ixgbe_phy_m88,
+ ixgbe_phy_fw,
ixgbe_phy_generic
};
ixgbe_fc_default
};
-/* Master/slave control */
-enum ixgbe_ms_type {
- ixgbe_ms_hw_default = 0,
- ixgbe_ms_force_master,
- ixgbe_ms_force_slave,
- ixgbe_ms_auto
-};
-
/* Smart Speed Settings */
#define IXGBE_SMARTSPEED_MAX_RETRIES 3
enum ixgbe_smart_speed {
bool reset_disable;
ixgbe_autoneg_advertised autoneg_advertised;
ixgbe_link_speed speeds_supported;
- enum ixgbe_ms_type ms_type;
- enum ixgbe_ms_type original_ms_type;
+ ixgbe_link_speed eee_speeds_supported;
+ ixgbe_link_speed eee_speeds_advertised;
enum ixgbe_smart_speed smart_speed;
bool smart_speed_active;
bool multispeed_fiber;
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_1G (1u << 19)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G (1u << 20)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_10G (1u << 21)
-#define IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M (1 << 23)
-#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24)
+#define IXGBE_NW_MNG_IF_SEL_SGMII_ENABLE (1u << 25)
+#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24) /* X552 reg field only */
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT 3
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD \
(0x1F << IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT)