STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
/**
- * ixgbe_init_ops_X540 - Inits func ptrs and MAC type
- * @hw: pointer to hardware structure
+ * ixgbe_init_ops_X540 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
*
- * Initialize the function pointers and assign the MAC type for X540.
- * Does not touch the hardware.
+ * Initialize the function pointers and assign the MAC type for X540.
+ * Does not touch the hardware.
**/
s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_link_capabilities_X540 - Determines link capabilities
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: true when autoneg or autotry is enabled
+ * ixgbe_get_link_capabilities_X540 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
*
- * Determines the link capabilities by reading the AUTOC register.
+ * Determines the link capabilities by reading the AUTOC register.
**/
s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
}
/**
- * ixgbe_get_media_type_X540 - Get media type
- * @hw: pointer to hardware structure
+ * ixgbe_get_media_type_X540 - Get media type
+ * @hw: pointer to hardware structure
*
- * Returns the media type (fiber, copper, backplane)
+ * Returns the media type (fiber, copper, backplane)
**/
enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
**/
s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
}
/**
- * ixgbe_reset_hw_X540 - Perform hardware reset
- * @hw: pointer to hardware structure
+ * ixgbe_reset_hw_X540 - Perform hardware reset
+ * @hw: pointer to hardware structure
*
- * Resets the hardware by resetting the transmit and receive units, masks
- * and clears all interrupts, and perform a reset.
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, and perform a reset.
**/
s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
- * @hw: pointer to hardware structure
+ * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
*
- * Starts the hardware using the generic start_hw function
- * and the generation start_hw function.
- * Then performs revision-specific operations, if any.
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
**/
s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
{
if (ret_val != IXGBE_SUCCESS)
goto out;
- ret_val = ixgbe_start_hw_gen2(hw);
+ ixgbe_start_hw_gen2(hw);
out:
return ret_val;
}
/**
- * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
- * @hw: pointer to hardware structure
+ * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
+ * @hw: pointer to hardware structure
*
- * Determines physical layer capabilities of the current configuration.
+ * Determines physical layer capabilities of the current configuration.
**/
u64 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
- * @hw: pointer to hardware structure
+ * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
*
- * Initializes the EEPROM parameters ixgbe_eeprom_info within the
- * ixgbe_hw struct in order to set up EEPROM access.
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
**/
s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_read_eerd_X540- Read EEPROM word using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EEPROM
+ * ixgbe_read_eerd_X540- Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
*
- * Reads a 16 bit word from the EEPROM using the EERD register.
+ * Reads a 16 bit word from the EEPROM using the EERD register.
**/
s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
}
/**
- * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of words
- * @data: word(s) read from the EEPROM
+ * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
*
- * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
**/
s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
}
/**
- * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @data: word write to the EEPROM
+ * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
*
- * Write a 16 bit word to the EEPROM using the EEWR register.
+ * Write a 16 bit word to the EEPROM using the EEWR register.
**/
s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
{
}
/**
- * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @words: number of words
- * @data: word(s) write to the EEPROM
+ * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
*
- * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
**/
s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
}
/**
- * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
*
- * This function does not use synchronization for EERD and EEWR. It can
- * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
+ * This function does not use synchronization for EERD and EEWR. It can
+ * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
*
- * @hw: pointer to hardware structure
+ * @hw: pointer to hardware structure
*
- * Returns a negative error code on error, or the 16-bit checksum
+ * Returns a negative error code on error, or the 16-bit checksum
**/
s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
- * @hw: pointer to hardware structure
- * @checksum_val: calculated checksum
+ * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
*
- * Performs checksum calculation and validates the EEPROM checksum. If the
- * caller does not need checksum_val, the value can be NULL.
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
**/
s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
u16 *checksum_val)
}
/**
- * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
- * @hw: pointer to hardware structure
+ * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
*
- * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
- * EEPROM from shadow RAM to the flash device.
+ * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
+ * EEPROM from shadow RAM to the flash device.
**/
s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_poll_flash_update_done_X540 - Poll flash update status
- * @hw: pointer to hardware structure
+ * ixgbe_poll_flash_update_done_X540 - Poll flash update status
+ * @hw: pointer to hardware structure
*
- * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
- * flash update is done.
+ * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
+ * flash update is done.
**/
STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to acquire
+ * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
*
- * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
- * the specified function (CSR, PHY0, PHY1, NVM, Flash)
+ * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
+ * the specified function (CSR, PHY0, PHY1, NVM, Flash)
**/
s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to release
+ * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
*
- * Releases the SWFW semaphore through the SW_FW_SYNC register
- * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
+ * Releases the SWFW semaphore through the SW_FW_SYNC register
+ * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
**/
void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
- * @hw: pointer to hardware structure
+ * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
*
- * Sets the hardware semaphores so SW/FW can gain control of shared resources
+ * Sets the hardware semaphores so SW/FW can gain control of shared resources
**/
STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_release_swfw_sync_semaphore - Release hardware semaphore
- * @hw: pointer to hardware structure
+ * ixgbe_release_swfw_sync_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
*
- * This function clears hardware semaphore bits.
+ * This function clears hardware semaphore bits.
**/
STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_init_swfw_sync_X540 - Release hardware semaphore
- * @hw: pointer to hardware structure
+ * ixgbe_init_swfw_sync_X540 - Release hardware semaphore
+ * @hw: pointer to hardware structure
*
- * This function reset hardware semaphore bits for a semaphore that may
- * have be left locked due to a catastrophic failure.
+ * This function reset hardware semaphore bits for a semaphore that may
+ * have be left locked due to a catastrophic failure.
**/
void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw)
{
* @index: led number to blink
*
* Devices that implement the version 2 interface:
- * X540
+ * X540
**/
s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
{
* @index: led number to stop blinking
*
* Devices that implement the version 2 interface:
- * X540
+ * X540
**/
s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
{
git.droids-corp.org / dpdk.git / blobdiff