sizeof(token_cmd),
IXGBE_HI_COMMAND_TIMEOUT,
true);
- if (status)
+ if (status) {
+ DEBUGOUT1("Issuing host interface command failed with Status = %d\n",
+ status);
return status;
+ }
if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK)
return IXGBE_SUCCESS;
- if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY)
+ if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY) {
+ DEBUGOUT1("Host interface command returned 0x%08x , returning IXGBE_ERR_FW_RESP_INVALID\n",
+ token_cmd.hdr.cmd_or_resp.ret_status);
return IXGBE_ERR_FW_RESP_INVALID;
+ }
+ DEBUGOUT("Returning IXGBE_ERR_TOKEN_RETRY\n");
return IXGBE_ERR_TOKEN_RETRY;
}
/* set up for CS4227 usage */
hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
break;
+ case IXGBE_DEV_ID_X550EM_X_1G_T:
+ phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi_22;
+ phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi_22;
+ break;
default:
break;
}
u32 ctrl = 0;
u32 i;
bool link_up = false;
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
DEBUGFUNC("ixgbe_reset_hw_X550em");
/* Call adapter stop to disable Tx/Rx and clear interrupts */
status = hw->mac.ops.stop_adapter(hw);
- if (status != IXGBE_SUCCESS)
+ if (status != IXGBE_SUCCESS) {
+ DEBUGOUT1("Failed to stop adapter, STATUS = %d\n", status);
return status;
-
+ }
/* flush pending Tx transactions */
ixgbe_clear_tx_pending(hw);
/* PHY ops must be identified and initialized prior to reset */
status = hw->phy.ops.init(hw);
- if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ if (status)
+ DEBUGOUT1("Failed to initialize PHY ops, STATUS = %d\n",
+ status);
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ DEBUGOUT("Returning from reset HW due to PHY init failure\n");
return status;
+ }
/* start the external PHY */
if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
status = ixgbe_init_ext_t_x550em(hw);
- if (status)
+ if (status) {
+ DEBUGOUT1("Failed to start the external PHY, STATUS = %d\n",
+ status);
return status;
+ }
}
/* Setup SFP module if there is one present. */
ctrl = IXGBE_CTRL_RST;
}
+ status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
+ if (status != IXGBE_SUCCESS) {
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "semaphore failed with %d", status);
+ return IXGBE_ERR_SWFW_SYNC;
+ }
+
ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
IXGBE_WRITE_FLUSH(hw);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
/* Poll for reset bit to self-clear meaning reset is complete */
for (i = 0; i < 10; i++) {
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
ixgbe_setup_mux_ctl(hw);
+ if (status != IXGBE_SUCCESS)
+ DEBUGOUT1("Reset HW failed, STATUS = %d\n", status);
+
return status;
}
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL)
return IXGBE_SUCCESS;
+ if (ixgbe_check_reset_blocked(hw))
+ return 0;
+
return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
}
if (ret_val != IXGBE_SUCCESS)
return ret_val;
- if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
- /* Configure CS4227 LINE side to 10G SR. */
- reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB +
- (hw->bus.lan_id << 12);
- reg_val = IXGBE_CS4227_SPEED_10G;
- ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
- reg_val);
+ /* Configure internal PHY for KR/KX. */
+ ixgbe_setup_kr_speed_x550em(hw, speed);
- reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
- (hw->bus.lan_id << 12);
+ /* Configure CS4227 LINE side to proper mode. */
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
+ (hw->bus.lan_id << 12);
+ if (setup_linear)
+ reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ else
reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
- ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
- reg_val);
-
- /* Configure CS4227 for HOST connection rate then type. */
- reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB +
- (hw->bus.lan_id << 12);
- reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ?
- IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
- ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
- reg_val);
-
- reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB +
- (hw->bus.lan_id << 12);
- if (setup_linear)
- reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
- else
- reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
- ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
- reg_val);
-
- /* Setup XFI internal link. */
- ret_val = ixgbe_setup_ixfi_x550em(hw, &speed);
- } else {
- /* Configure internal PHY for KR/KX. */
- ixgbe_setup_kr_speed_x550em(hw, speed);
-
- /* Configure CS4227 LINE side to proper mode. */
- reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
- (hw->bus.lan_id << 12);
- if (setup_linear)
- reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
- else
- reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
- ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
- reg_val);
- }
+ ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
+ reg_val);
return ret_val;
}
*
* Determines physical layer capabilities of the current configuration.
**/
-u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
+u64 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
{
- u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
u16 ext_ability = 0;
DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em");
switch (hw->phy.type) {
case ixgbe_phy_x550em_kr:
+ if (hw->mac.type == ixgbe_mac_X550EM_a) {
+ if (hw->phy.nw_mng_if_sel &
+ IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) {
+ physical_layer =
+ IXGBE_PHYSICAL_LAYER_2500BASE_KX;
+ break;
+ } else if (hw->device_id ==
+ IXGBE_DEV_ID_X550EM_A_KR_L) {
+ physical_layer =
+ IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ break;
+ }
+ }
+ /* fall through */
case ixgbe_phy_x550em_xfi:
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR |
IXGBE_PHYSICAL_LAYER_1000BASE_KX;
/* This device does not fully support AN. */
hw->fc.disable_fc_autoneg = true;
break;
+ case IXGBE_DEV_ID_X550EM_X_XFI:
+ hw->fc.disable_fc_autoneg = true;
+ break;
default:
break;
}
status = IXGBE_SUCCESS;
if (hmask)
status = ixgbe_acquire_swfw_sync_X540(hw, hmask);
- if (status)
+ if (status) {
+ DEBUGOUT1("Could not acquire SWFW semaphore, Status = %d\n",
+ status);
return status;
+ }
if (!(mask & IXGBE_GSSR_TOKEN_SM))
return IXGBE_SUCCESS;
status = ixgbe_get_phy_token(hw);
+ if (status == IXGBE_ERR_TOKEN_RETRY)
+ DEBUGOUT1("Could not acquire PHY token, Status = %d\n",
+ status);
+
if (status == IXGBE_SUCCESS)
return IXGBE_SUCCESS;
if (hmask)
ixgbe_release_swfw_sync_X540(hw, hmask);
- if (status != IXGBE_ERR_TOKEN_RETRY)
+
+ if (status != IXGBE_ERR_TOKEN_RETRY) {
+ DEBUGOUT1("Unable to retry acquiring the PHY token, Status = %d\n",
+ status);
return status;
+ }
}
+ DEBUGOUT1("Semaphore acquisition retries failed!: PHY ID = 0x%08X\n",
+ hw->phy.id);
return status;
}
ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
- return IXGBE_SUCCESS;
+ /* Some designs have the LEDs wired to the MAC */
+ return ixgbe_led_on_generic(hw, led_idx);
}
/**
ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
- return IXGBE_SUCCESS;
+ /* Some designs have the LEDs wired to the MAC */
+ return ixgbe_led_off_generic(hw, led_idx);
}
/**