/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2001-2018
+ * Copyright(c) 2001-2020 Intel Corporation
*/
#include "ixgbe_x550.h"
STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw);
/**
- * ixgbe_init_ops_X550 - Inits func ptrs and MAC type
- * @hw: pointer to hardware structure
+ * ixgbe_init_ops_X550 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
*
- * Initialize the function pointers and assign the MAC type for X550.
- * Does not touch the hardware.
+ * Initialize the function pointers and assign the MAC type for X550.
+ * Does not touch the hardware.
**/
s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw)
{
for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) {
if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed)
- setup[0] |= ixgbe_fw_map[i].fw_speed;
+ setup[0] |= (u32)(ixgbe_fw_map[i].fw_speed);
}
setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN;
* ixgbe_fc_autoneg_fw _ Set up flow control for FW-controlled PHYs
* @hw: pointer to hardware structure
*
- * Called at init time to set up flow control.
+ * Called at init time to set up flow control.
*/
static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_dmac_config_X550
- * @hw: pointer to hardware structure
+ * ixgbe_dmac_config_X550
+ * @hw: pointer to hardware structure
*
- * Configure DMA coalescing. If enabling dmac, dmac is activated.
- * When disabling dmac, dmac enable dmac bit is cleared.
+ * Configure DMA coalescing. If enabling dmac, dmac is activated.
+ * When disabling dmac, dmac enable dmac bit is cleared.
**/
s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_dmac_config_tcs_X550
- * @hw: pointer to hardware structure
+ * ixgbe_dmac_config_tcs_X550
+ * @hw: pointer to hardware structure
*
- * Configure DMA coalescing threshold per TC. The dmac enable bit must
- * be cleared before configuring.
+ * Configure DMA coalescing threshold per TC. The dmac enable bit must
+ * be cleared before configuring.
**/
s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_dmac_update_tcs_X550
- * @hw: pointer to hardware structure
+ * ixgbe_dmac_update_tcs_X550
+ * @hw: pointer to hardware structure
*
- * Disables dmac, updates per TC settings, and then enables dmac.
+ * Disables dmac, updates per TC settings, and then enables dmac.
**/
s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
- * @hw: pointer to hardware structure
+ * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
*
- * Initializes the EEPROM parameters ixgbe_eeprom_info within the
- * ixgbe_hw struct in order to set up EEPROM access.
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
**/
s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing
- * @hw: pointer to hardware structure
- * @enable: enable or disable switch for Ethertype anti-spoofing
- * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ * ixgbe_set_ethertype_anti_spoofing_X550 - Configure Ethertype anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for Ethertype anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
*
**/
void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
}
/**
- * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register
- * of the IOSF device
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 3 bit device type
- * @data: Data to write to the register
+ * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register
+ * of the IOSF device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @data: Data to write to the register
**/
s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u32 data)
}
/**
- * ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 3 bit device type
- * @data: Pointer to read data from the register
+ * ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @data: Pointer to read data from the register
**/
s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u32 *data)
}
/**
- * ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register
- * of the IOSF device
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 3 bit device type
- * @data: Data to write to the register
+ * ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register
+ * of the IOSF device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @data: Data to write to the register
**/
s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u32 data)
}
/**
- * ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 3 bit device type
- * @data: Pointer to read data from the register
+ * ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @data: Pointer to read data from the register
**/
s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u32 *data)
}
/**
- * ixgbe_disable_mdd_X550
- * @hw: pointer to hardware structure
+ * ixgbe_disable_mdd_X550
+ * @hw: pointer to hardware structure
*
- * Disable malicious driver detection
+ * Disable malicious driver detection
**/
void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_enable_mdd_X550
- * @hw: pointer to hardware structure
+ * ixgbe_enable_mdd_X550
+ * @hw: pointer to hardware structure
*
- * Enable malicious driver detection
+ * Enable malicious driver detection
**/
void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_restore_mdd_vf_X550
- * @hw: pointer to hardware structure
- * @vf: vf index
+ * ixgbe_restore_mdd_vf_X550
+ * @hw: pointer to hardware structure
+ * @vf: vf index
*
- * Restore VF that was disabled during malicious driver detection event
+ * Restore VF that was disabled during malicious driver detection event
**/
void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf)
{
}
/**
- * ixgbe_mdd_event_X550
- * @hw: pointer to hardware structure
- * @vf_bitmap: vf bitmap of malicious vfs
+ * ixgbe_mdd_event_X550
+ * @hw: pointer to hardware structure
+ * @vf_bitmap: vf bitmap of malicious vfs
*
- * Handle malicious driver detection event.
+ * Handle malicious driver detection event.
**/
void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap)
{
}
/**
- * ixgbe_get_media_type_X550em - Get media type
- * @hw: pointer to hardware structure
+ * ixgbe_get_media_type_X550em - Get media type
+ * @hw: pointer to hardware structure
*
- * Returns the media type (fiber, copper, backplane)
+ * Returns the media type (fiber, copper, backplane)
*/
enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
- * @hw: pointer to hardware structure
- * @linear: true if SFP module is linear
+ * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
+ * @hw: pointer to hardware structure
+ * @linear: true if SFP module is linear
*/
STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
{
case ixgbe_sfp_type_1g_sx_core1:
case ixgbe_sfp_type_1g_lx_core0:
case ixgbe_sfp_type_1g_lx_core1:
+ case ixgbe_sfp_type_1g_lha_core0:
+ case ixgbe_sfp_type_1g_lha_core1:
*linear = false;
break;
case ixgbe_sfp_type_unknown:
}
/**
- * ixgbe_identify_sfp_module_X550em - Identifies SFP modules
- * @hw: pointer to hardware structure
+ * ixgbe_identify_sfp_module_X550em - Identifies SFP modules
+ * @hw: pointer to hardware structure
*
- * Searches for and identifies the SFP module and assigns appropriate PHY type.
+ * Searches for and identifies the SFP module and assigns appropriate PHY type.
**/
s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
- * @hw: pointer to hardware structure
+ * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
+ * @hw: pointer to hardware structure
*/
s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
{
return status;
}
-#ifndef PREBOOT_SUPPORT
/**
* ixgbe_setup_sgmii - Set up link for sgmii
* @hw: pointer to hardware structure
return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
}
-#endif /* PREBOOT_SUPPORT */
/**
* ixgbe_setup_sgmii_fw - Set up link for internal PHY SGMII auto-negotiation
* @hw: pointer to hardware structure
}
/**
- * ixgbe_init_mac_link_ops_X550em - init mac link function pointers
- * @hw: pointer to hardware structure
+ * ixgbe_init_mac_link_ops_X550em - init mac link function pointers
+ * @hw: pointer to hardware structure
*/
void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
{
case ixgbe_media_type_backplane:
if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII ||
hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L)
-#ifdef PREBOOT_SUPPORT
- mac->ops.setup_link = ixgbe_setup_sgmii_fw;
-#else
mac->ops.setup_link = ixgbe_setup_sgmii;
-#endif /* PREBOOT_SUPPORT */
break;
default:
break;
}
/**
- * ixgbe_get_link_capabilities_x550em - Determines link capabilities
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: true when autoneg or autotry is enabled
+ * ixgbe_get_link_capabilities_x550em - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
*/
s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
/* Check if 1G SFP module. */
if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1
+ || hw->phy.sfp_type == ixgbe_sfp_type_1g_lha_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lha_core1
|| hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
*speed = IXGBE_LINK_SPEED_1GB_FULL;
else
*speed = IXGBE_LINK_SPEED_10GB_FULL;
} else {
+ *autoneg = true;
+
switch (hw->phy.type) {
- case ixgbe_phy_ext_1g_t:
-#ifdef PREBOOT_SUPPORT
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ case ixgbe_phy_x550em_xfi:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL |
+ IXGBE_LINK_SPEED_10GB_FULL;
+ *autoneg = false;
break;
-#endif /* PREBOOT_SUPPORT */
+ case ixgbe_phy_ext_1g_t:
case ixgbe_phy_sgmii:
-#ifdef PREBOOT_SUPPORT
- *speed = IXGBE_LINK_SPEED_1GB_FULL |
- IXGBE_LINK_SPEED_100_FULL |
- IXGBE_LINK_SPEED_10_FULL;
-#else
*speed = IXGBE_LINK_SPEED_1GB_FULL;
-#endif /* PREBOOT_SUPPORT */
break;
case ixgbe_phy_x550em_kr:
if (hw->mac.type == ixgbe_mac_X550EM_a) {
IXGBE_LINK_SPEED_1GB_FULL;
break;
}
- *autoneg = true;
}
return IXGBE_SUCCESS;
* ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
* @hw: pointer to hardware structure
* @lsc: pointer to boolean flag which indicates whether external Base T
- * PHY interrupt is lsc
+ * PHY interrupt is lsc
*
* Determime if external Base T PHY interrupt cause is high temperature
* failure alarm or link status change.
}
/**
- * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
- * @hw: pointer to hardware structure
- * @speed: link speed
+ * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
+ * @hw: pointer to hardware structure
+ * @speed: link speed
*
- * Configures the integrated KR PHY.
+ * Configures the integrated KR PHY.
**/
STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
ixgbe_link_speed speed)
}
/**
- * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register
- * @hw: pointer to hardware structure
+ * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register
+ * @hw: pointer to hardware structure
*
- * Read NW_MNG_IF_SEL register and save field values, and check for valid field
- * values.
+ * Read NW_MNG_IF_SEL register and save field values, and check for valid field
+ * values.
**/
STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_init_phy_ops_X550em - PHY/SFP specific init
- * @hw: pointer to hardware structure
+ * ixgbe_init_phy_ops_X550em - PHY/SFP specific init
+ * @hw: pointer to hardware structure
*
- * Initialize any function pointers that were not able to be
- * set during init_shared_code because the PHY/SFP type was
- * not known. Perform the SFP init if necessary.
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
*/
s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
{
/**
* ixgbe_set_mdio_speed - Set MDIO clock speed
- * @hw: pointer to hardware structure
+ * @hw: pointer to hardware structure
*/
STATIC void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_reset_hw_X550em - Perform hardware reset
- * @hw: pointer to hardware structure
+ * ixgbe_reset_hw_X550em - Perform hardware reset
+ * @hw: pointer to hardware structure
*
- * Resets the hardware by resetting the transmit and receive units, masks
- * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
- * reset.
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
*/
s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_kr_x550em - Configure the KR PHY.
- * @hw: pointer to hardware structure
+ * ixgbe_setup_kr_x550em - Configure the KR PHY.
+ * @hw: pointer to hardware structure
**/
s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: unused
+ * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: unused
*
- * Configure the external PHY and the integrated KR PHY for SFP support.
+ * Configure the external PHY and the integrated KR PHY for SFP support.
**/
s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
}
/**
- * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode
- * @hw: pointer to hardware structure
- * @speed: the link speed to force
+ * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode
+ * @hw: pointer to hardware structure
+ * @speed: the link speed to force
*
- * Configures the integrated PHY for native SFI mode. Used to connect the
- * internal PHY directly to an SFP cage, without autonegotiation.
+ * Configures the integrated PHY for native SFI mode. Used to connect the
+ * internal PHY directly to an SFP cage, without autonegotiation.
**/
STATIC s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
{
}
/**
- * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: unused
+ * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: unused
*
- * Configure the integrated PHY for SFP support.
+ * Configure the integrated PHY for SFP support.
**/
s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
}
/**
- * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
- * @hw: pointer to hardware structure
+ * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
+ * @hw: pointer to hardware structure
*
- * iXfI configuration needed for ixgbe_mac_X550EM_x devices.
+ * iXfI configuration needed for ixgbe_mac_X550EM_x devices.
**/
STATIC s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
- * @hw: pointer to hardware structure
- * @speed: the link speed to force
+ * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+ * @hw: pointer to hardware structure
+ * @speed: the link speed to force
*
- * Configures the integrated KR PHY to use iXFI mode. Used to connect an
- * internal and external PHY at a specific speed, without autonegotiation.
+ * Configures the integrated KR PHY to use iXFI mode. Used to connect an
+ * internal and external PHY at a specific speed, without autonegotiation.
**/
STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
{
}
/**
- * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
- * @hw: pointer to hardware structure
+ * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
+ * @hw: pointer to hardware structure
*
- * Configures the integrated KR PHY to use internal loopback mode.
+ * Configures the integrated KR PHY to use internal loopback mode.
**/
s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
- * assuming that the semaphore is already obtained.
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EEPROM
+ * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ * assuming that the semaphore is already obtained.
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
*
- * Reads a 16 bit word from the EEPROM using the hostif.
+ * Reads a 16 bit word from the EEPROM using the hostif.
**/
s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
/* one word */
buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
buffer.pad2 = 0;
+ buffer.data = 0;
buffer.pad3 = 0;
status = hw->mac.ops.acquire_swfw_sync(hw, mask);
}
/**
- * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of words
- * @data: word(s) read from the EEPROM
+ * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
*
- * Reads a 16 bit word(s) from the EEPROM using the hostif.
+ * Reads a 16 bit word(s) from the EEPROM using the hostif.
**/
s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2);
buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2);
buffer.pad2 = 0;
+ buffer.data = 0;
buffer.pad3 = 0;
status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer),
}
/**
- * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @data: word write to the EEPROM
+ * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
*
- * Write a 16 bit word to the EEPROM using the hostif.
+ * Write a 16 bit word to the EEPROM using the hostif.
**/
s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
u16 data)
status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
sizeof(buffer),
- IXGBE_HI_COMMAND_TIMEOUT, false);
+ IXGBE_HI_COMMAND_TIMEOUT, true);
+ if (status != IXGBE_SUCCESS) {
+ DEBUGOUT2("for offset %04x failed with status %d\n",
+ offset, status);
+ return status;
+ }
+
+ if (buffer.hdr.rsp.buf_lenh_status != FW_CEM_RESP_STATUS_SUCCESS) {
+ DEBUGOUT2("for offset %04x host interface return status %02x\n",
+ offset, buffer.hdr.rsp.buf_lenh_status);
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
return status;
}
/**
- * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @data: word write to the EEPROM
+ * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
*
- * Write a 16 bit word to the EEPROM using the hostif.
+ * Write a 16 bit word to the EEPROM using the hostif.
**/
s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
u16 data)
}
/**
- * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @words: number of words
- * @data: word(s) write to the EEPROM
+ * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
*
- * Write a 16 bit word(s) to the EEPROM using the hostif.
+ * Write a 16 bit word(s) to the EEPROM using the hostif.
**/
s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
}
/**
- * ixgbe_calc_checksum_X550 - Calculates and returns the checksum
- * @hw: pointer to hardware structure
- * @buffer: pointer to buffer containing calculated checksum
- * @buffer_size: size of buffer
+ * ixgbe_calc_checksum_X550 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ * @buffer: pointer to buffer containing calculated checksum
+ * @buffer_size: size of buffer
*
- * Returns a negative error code on error, or the 16-bit checksum
+ * Returns a negative error code on error, or the 16-bit checksum
**/
s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
{
}
/**
- * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
- * @hw: pointer to hardware structure
+ * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
*
- * Returns a negative error code on error, or the 16-bit checksum
+ * Returns a negative error code on error, or the 16-bit checksum
**/
s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
- * @hw: pointer to hardware structure
- * @checksum_val: calculated checksum
+ * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
*
- * Performs checksum calculation and validates the EEPROM checksum. If the
- * caller does not need checksum_val, the value can be NULL.
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
**/
s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
{
}
/**
- * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
- * @hw: pointer to hardware structure
+ * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
*
- * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
+ * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
**/
s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
- * @hw: pointer to hardware structure
+ * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
+ * @hw: pointer to hardware structure
*
- * Determines physical layer capabilities of the current configuration.
+ * Determines physical layer capabilities of the current configuration.
**/
u64 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
{
physical_layer |= IXGBE_PHYSICAL_LAYER_10BASE_T;
break;
case ixgbe_phy_sgmii:
-#ifdef PREBOOT_SUPPORT
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
- IXGBE_PHYSICAL_LAYER_100BASE_TX |
- IXGBE_PHYSICAL_LAYER_10BASE_T;
-#else
physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
-#endif /* PREBOOT_SUPPORT */
break;
case ixgbe_phy_ext_1g_t:
physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
/**
* ixgbe_enter_lplu_x550em - Transition to low power states
- * @hw: pointer to hardware structure
+ * @hw: pointer to hardware structure
*
* Configures Low Power Link Up on transition to low power states
* (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
/**
* ixgbe_get_lcd_x550em - Determine lowest common denominator
- * @hw: pointer to hardware structure
- * @lcd_speed: pointer to lowest common link speed
+ * @hw: pointer to hardware structure
+ * @lcd_speed: pointer to lowest common link speed
*
* Determine lowest common link speed with link partner.
**/
}
/**
- * ixgbe_setup_fc_X550em - Set up flow control
- * @hw: pointer to hardware structure
+ * ixgbe_setup_fc_X550em - Set up flow control
+ * @hw: pointer to hardware structure
*
- * Called at init time to set up flow control.
+ * Called at init time to set up flow control.
**/
s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37
- * @hw: pointer to hardware structure
+ * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
*
- * Enable flow control according to IEEE clause 37.
+ * Enable flow control according to IEEE clause 37.
**/
void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
- * @hw: pointer to hardware structure
+ * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
+ * @hw: pointer to hardware structure
*
**/
void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw)
}
/**
- * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37
- * @hw: pointer to hardware structure
+ * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
*
- * Enable flow control according to IEEE clause 37.
+ * Enable flow control according to IEEE clause 37.
**/
void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_setup_fc_backplane_x550em_a - Set up flow control
- * @hw: pointer to hardware structure
+ * ixgbe_setup_fc_backplane_x550em_a - Set up flow control
+ * @hw: pointer to hardware structure
*
- * Called at init time to set up flow control.
+ * Called at init time to set up flow control.
**/
s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to acquire
+ * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
*
- * Acquires the SWFW semaphore and sets the I2C MUX
+ * Acquires the SWFW semaphore and sets the I2C MUX
**/
s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to release
+ * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
*
- * Releases the SWFW semaphore and sets the I2C MUX
+ * Releases the SWFW semaphore and sets the I2C MUX
**/
void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to acquire
+ * ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
*
- * Acquires the SWFW semaphore and get the shared phy token as needed
+ * Acquires the SWFW semaphore and get the shared phy token as needed
*/
STATIC s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_release_swfw_sync_X550a - Release SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to release
+ * ixgbe_release_swfw_sync_X550a - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
*
- * Releases the SWFW semaphore and puts the shared phy token as needed
+ * Releases the SWFW semaphore and puts the shared phy token as needed
*/
STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
{
}
/**
- * ixgbe_read_phy_reg_x550a - Reads specified PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit address of PHY register to read
- * @device_type: 5 bit device type
- * @phy_data: Pointer to read data from PHY register
+ * ixgbe_read_phy_reg_x550a - Reads specified PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: 5 bit device type
+ * @phy_data: Pointer to read data from PHY register
*
- * Reads a value from a specified PHY register using the SWFW lock and PHY
- * Token. The PHY Token is needed since the MDIO is shared between to MAC
- * instances.
+ * Reads a value from a specified PHY register using the SWFW lock and PHY
+ * Token. The PHY Token is needed since the MDIO is shared between to MAC
+ * instances.
**/
s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 *phy_data)
}
/**
- * ixgbe_write_phy_reg_x550a - Writes specified PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 5 bit device type
- * @phy_data: Data to write to the PHY register
+ * ixgbe_write_phy_reg_x550a - Writes specified PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
*
- * Writes a value to specified PHY register using the SWFW lock and PHY Token.
- * The PHY Token is needed since the MDIO is shared between to MAC instances.
+ * Writes a value to specified PHY register using the SWFW lock and PHY Token.
+ * The PHY Token is needed since the MDIO is shared between to MAC instances.
**/
s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 phy_data)
{
s32 status;
ixgbe_link_speed force_speed;
+ u32 i;
+ bool link_up = false;
DEBUGFUNC("ixgbe_setup_mac_link_t_X550em");
if (status != IXGBE_SUCCESS)
return status;
+
+ /* Wait for the controller to acquire link */
+ for (i = 0; i < 10; i++) {
+ msec_delay(100);
+
+ status = ixgbe_check_link(hw, &force_speed, &link_up,
+ false);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (link_up)
+ break;
+ }
}
return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
}
/**
- * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
- * @hw: pointer to hardware structure
+ * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
+ * @hw: pointer to hardware structure
**/
s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
{
}
/**
- * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
- * @hw: pointer to hardware structure
- * @led_idx: led number to turn on
+ * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @led_idx: led number to turn on
**/
s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
{
}
/**
- * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
- * @hw: pointer to hardware structure
- * @led_idx: led number to turn off
+ * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @led_idx: led number to turn off
**/
s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
{
}
/**
- * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware
- * @hw: pointer to the HW structure
- * @maj: driver version major number
- * @min: driver version minor number
- * @build: driver version build number
- * @sub: driver version sub build number
- * @len: length of driver_ver string
- * @driver_ver: driver string
+ * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware
+ * @hw: pointer to the HW structure
+ * @maj: driver version major number
+ * @min: driver version minor number
+ * @build: driver version build number
+ * @sub: driver version sub build number
+ * @len: length of driver_ver string
+ * @driver_ver: driver string
*
- * Sends driver version number to firmware through the manageability
- * block. On success return IXGBE_SUCCESS
- * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
- * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ * Sends driver version number to firmware through the manageability
+ * block. On success return IXGBE_SUCCESS
+ * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
**/
s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min,
u8 build, u8 sub, u16 len, const char *driver_ver)