net/mlx5: add OS specific flow type selection

[dpdk.git] / drivers / net / ixgbe / ixgbe_ethdev.c

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index cf5f1fe..095f1bd 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -419,19 +419,6 @@ static int ixgbe_wait_for_link_up(struct ixgbe_hw *hw);
                (r) = (h)->bitmap[idx] >> bit & 1;\
        } while (0)
 
-int ixgbe_logtype_init;
-int ixgbe_logtype_driver;
-
-#ifdef RTE_LIBRTE_IXGBE_DEBUG_RX
-int ixgbe_logtype_rx;
-#endif
-#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX
-int ixgbe_logtype_tx;
-#endif
-#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX_FREE
-int ixgbe_logtype_tx_free;
-#endif
-
 /*
  * The set of PCI devices this driver supports
  */
@@ -2543,6 +2530,8 @@ ixgbe_flow_ctrl_enable(struct rte_eth_dev *dev, struct ixgbe_hw *hw)
        int err;
        uint32_t mflcn;
 
+       ixgbe_setup_fc(hw);
+
        err = ixgbe_fc_enable(hw);
 
        /* Not negotiated is not an error case */
@@ -4281,9 +4270,13 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
 
        if (link_up == 0) {
                if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
-                       intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
                        ixgbe_dev_wait_setup_link_complete(dev, 0);
                        if (rte_atomic32_test_and_set(&ad->link_thread_running)) {
+                               /* To avoid race condition between threads, set
+                                * the IXGBE_FLAG_NEED_LINK_CONFIG flag only
+                                * when there is no link thread running.
+                                */
+                               intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
                                if (rte_ctrl_thread_create(&ad->link_thread_tid,
                                        "ixgbe-link-handler",
                                        NULL,
@@ -4314,6 +4307,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
                        link.link_speed = ETH_SPEED_NUM_100M;
                break;
 
+       case IXGBE_LINK_SPEED_10_FULL:
+               link.link_speed = ETH_SPEED_NUM_10M;
+               break;
+
        case IXGBE_LINK_SPEED_100_FULL:
                link.link_speed = ETH_SPEED_NUM_100M;
                break;
@@ -9111,29 +9108,15 @@ RTE_PMD_REGISTER_KMOD_DEP(net_ixgbe_vf, "* igb_uio | vfio-pci");
 RTE_PMD_REGISTER_PARAM_STRING(net_ixgbe_vf,
                              IXGBEVF_DEVARG_PFLINK_FULLCHK "=<0|1>");
 
-RTE_INIT(ixgbe_init_log)
-{
-       ixgbe_logtype_init = rte_log_register("pmd.net.ixgbe.init");
-       if (ixgbe_logtype_init >= 0)
-               rte_log_set_level(ixgbe_logtype_init, RTE_LOG_NOTICE);
-       ixgbe_logtype_driver = rte_log_register("pmd.net.ixgbe.driver");
-       if (ixgbe_logtype_driver >= 0)
-               rte_log_set_level(ixgbe_logtype_driver, RTE_LOG_NOTICE);
+RTE_LOG_REGISTER(ixgbe_logtype_init, pmd.net.ixgbe.init, NOTICE);
+RTE_LOG_REGISTER(ixgbe_logtype_driver, pmd.net.ixgbe.driver, NOTICE);
+
 #ifdef RTE_LIBRTE_IXGBE_DEBUG_RX
-       ixgbe_logtype_rx = rte_log_register("pmd.net.ixgbe.rx");
-       if (ixgbe_logtype_rx >= 0)
-               rte_log_set_level(ixgbe_logtype_rx, RTE_LOG_DEBUG);
+RTE_LOG_REGISTER(ixgbe_logtype_rx, pmd.net.ixgbe.rx, DEBUG);
 #endif
-
 #ifdef RTE_LIBRTE_IXGBE_DEBUG_TX
-       ixgbe_logtype_tx = rte_log_register("pmd.net.ixgbe.tx");
-       if (ixgbe_logtype_tx >= 0)
-               rte_log_set_level(ixgbe_logtype_tx, RTE_LOG_DEBUG);
+RTE_LOG_REGISTER(ixgbe_logtype_tx, pmd.net.ixgbe.tx, DEBUG);
 #endif
-
 #ifdef RTE_LIBRTE_IXGBE_DEBUG_TX_FREE
-       ixgbe_logtype_tx_free = rte_log_register("pmd.net.ixgbe.tx_free");
-       if (ixgbe_logtype_tx_free >= 0)
-               rte_log_set_level(ixgbe_logtype_tx_free, RTE_LOG_DEBUG);
+RTE_LOG_REGISTER(ixgbe_logtype_tx_free, pmd.net.ixgbe.tx_free, DEBUG);
 #endif
-}