static void ixgbe_dev_interrupt_handler(void *param);
static void ixgbe_dev_interrupt_delayed_handler(void *param);
static void *ixgbe_dev_setup_link_thread_handler(void *param);
-static void ixgbe_dev_cancel_link_thread(struct rte_eth_dev *dev);
+static int ixgbe_dev_wait_setup_link_complete(struct rte_eth_dev *dev,
+ uint32_t timeout_ms);
static int ixgbe_add_rar(struct rte_eth_dev *dev,
struct rte_ether_addr *mac_addr,
memset(dcb_config, 0, sizeof(struct ixgbe_dcb_config));
ixgbe_dcb_init(hw, dcb_config);
/* Get Hardware Flow Control setting */
- hw->fc.requested_mode = ixgbe_fc_full;
- hw->fc.current_mode = ixgbe_fc_full;
+ hw->fc.requested_mode = ixgbe_fc_none;
+ hw->fc.current_mode = ixgbe_fc_none;
hw->fc.pause_time = IXGBE_FC_PAUSE;
for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
hw->fc.low_water[i] = IXGBE_FC_LO;
diag = ixgbe_bypass_init_hw(hw);
#else
diag = ixgbe_init_hw(hw);
- hw->mac.autotry_restart = false;
#endif /* RTE_LIBRTE_IXGBE_BYPASS */
/*
/* enable support intr */
ixgbe_enable_intr(eth_dev);
- ixgbe_dev_set_link_down(eth_dev);
-
/* initialize filter info */
memset(filter_info, 0,
sizeof(struct ixgbe_filter_info));
return 0;
}
+static int
+ixgbe_flow_ctrl_enable(struct rte_eth_dev *dev, struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = dev->data->dev_private;
+ int err;
+ uint32_t mflcn;
+
+ ixgbe_setup_fc(hw);
+
+ err = ixgbe_fc_enable(hw);
+
+ /* Not negotiated is not an error case */
+ if (err == IXGBE_SUCCESS || err == IXGBE_ERR_FC_NOT_NEGOTIATED) {
+ /*
+ *check if we want to forward MAC frames - driver doesn't
+ *have native capability to do that,
+ *so we'll write the registers ourselves
+ */
+
+ mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+
+ /* set or clear MFLCN.PMCF bit depending on configuration */
+ if (adapter->mac_ctrl_frame_fwd != 0)
+ mflcn |= IXGBE_MFLCN_PMCF;
+ else
+ mflcn &= ~IXGBE_MFLCN_PMCF;
+
+ IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+ }
+ return err;
+}
+
/*
* Configure device link speed and setup link.
* It returns 0 on success.
PMD_INIT_FUNC_TRACE();
/* Stop the link setup handler before resetting the HW. */
- ixgbe_dev_cancel_link_thread(dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
/* disable uio/vfio intr/eventfd mapping */
rte_intr_disable(intr_handle);
ixgbe_restore_statistics_mapping(dev);
+ err = ixgbe_flow_ctrl_enable(dev, hw);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, "enable flow ctrl err");
+ goto error;
+ }
+
err = ixgbe_dev_rxtx_start(dev);
if (err < 0) {
PMD_INIT_LOG(ERR, "Unable to start rxtx queues");
PMD_INIT_FUNC_TRACE();
- ixgbe_dev_cancel_link_thread(dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
/* disable interrupts */
ixgbe_disable_intr(hw);
adapter->rss_reta_updated = 0;
+ adapter->mac_ctrl_frame_fwd = 0;
+
hw->adapter_stopped = true;
}
return ret_val;
}
-static void
-ixgbe_dev_cancel_link_thread(struct rte_eth_dev *dev)
+/*
+ * If @timeout_ms was 0, it means that it will not return until link complete.
+ * It returns 1 on complete, return 0 on timeout.
+ */
+static int
+ixgbe_dev_wait_setup_link_complete(struct rte_eth_dev *dev, uint32_t timeout_ms)
{
+#define WARNING_TIMEOUT 9000 /* 9s in total */
struct ixgbe_adapter *ad = dev->data->dev_private;
- void *retval;
-
- if (rte_atomic32_read(&ad->link_thread_running)) {
- pthread_cancel(ad->link_thread_tid);
- pthread_join(ad->link_thread_tid, &retval);
- rte_atomic32_clear(&ad->link_thread_running);
+ uint32_t timeout = timeout_ms ? timeout_ms : WARNING_TIMEOUT;
+
+ while (rte_atomic32_read(&ad->link_thread_running)) {
+ msec_delay(1);
+ timeout--;
+
+ if (timeout_ms) {
+ if (!timeout)
+ return 0;
+ } else if (!timeout) {
+ /* It will not return until link complete */
+ timeout = WARNING_TIMEOUT;
+ PMD_DRV_LOG(ERR, "IXGBE link thread not complete too long time!");
+ }
}
+
+ return 1;
}
static void *
u32 speed;
bool autoneg = false;
+ pthread_detach(pthread_self());
speed = hw->phy.autoneg_advertised;
if (!speed)
ixgbe_get_link_capabilities(hw, &speed, &autoneg);
if (wait_to_complete == 0 || dev->data->dev_conf.intr_conf.lsc != 0)
wait = 0;
+/* BSD has no interrupt mechanism, so force NIC status synchronization. */
+#ifdef RTE_EXEC_ENV_FREEBSD
+ wait = 1;
+#endif
+
if (vf)
diag = ixgbevf_check_link(hw, &link_speed, &link_up, wait);
else
if (link_up == 0) {
if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
- intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
if (rte_atomic32_test_and_set(&ad->link_thread_running)) {
+ /* To avoid race condition between threads, set
+ * the IXGBE_FLAG_NEED_LINK_CONFIG flag only
+ * when there is no link thread running.
+ */
+ intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
if (rte_ctrl_thread_create(&ad->link_thread_tid,
"ixgbe-link-handler",
NULL,
ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct ixgbe_hw *hw;
+ struct ixgbe_adapter *adapter = dev->data->dev_private;
int err;
uint32_t rx_buf_size;
uint32_t max_high_water;
- uint32_t mflcn;
enum ixgbe_fc_mode rte_fcmode_2_ixgbe_fcmode[] = {
ixgbe_fc_none,
ixgbe_fc_rx_pause,
hw->fc.low_water[0] = fc_conf->low_water;
hw->fc.send_xon = fc_conf->send_xon;
hw->fc.disable_fc_autoneg = !fc_conf->autoneg;
+ adapter->mac_ctrl_frame_fwd = fc_conf->mac_ctrl_frame_fwd;
- err = ixgbe_fc_enable(hw);
-
- /* Not negotiated is not an error case */
- if ((err == IXGBE_SUCCESS) || (err == IXGBE_ERR_FC_NOT_NEGOTIATED)) {
-
- /* check if we want to forward MAC frames - driver doesn't have native
- * capability to do that, so we'll write the registers ourselves */
-
- mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
-
- /* set or clear MFLCN.PMCF bit depending on configuration */
- if (fc_conf->mac_ctrl_frame_fwd != 0)
- mflcn |= IXGBE_MFLCN_PMCF;
- else
- mflcn &= ~IXGBE_MFLCN_PMCF;
-
- IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
+ err = ixgbe_flow_ctrl_enable(dev, hw);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, "ixgbe_flow_ctrl_enable = 0x%x", err);
+ return -EIO;
}
-
- PMD_INIT_LOG(ERR, "ixgbe_fc_enable = 0x%x", err);
- return -EIO;
+ return err;
}
/**
PMD_INIT_FUNC_TRACE();
/* Stop the link setup handler before resetting the HW. */
- ixgbe_dev_cancel_link_thread(dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
err = hw->mac.ops.reset_hw(hw);
if (err) {
PMD_INIT_FUNC_TRACE();
- ixgbe_dev_cancel_link_thread(dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
ixgbevf_intr_disable(dev);
static int
ixgbevf_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
- __attribute__((unused)) uint32_t index,
- __attribute__((unused)) uint32_t pool)
+ __rte_unused uint32_t index,
+ __rte_unused uint32_t pool)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
int diag;
}
static u8 *
-ixgbe_dev_addr_list_itr(__attribute__((unused)) struct ixgbe_hw *hw,
+ixgbe_dev_addr_list_itr(__rte_unused struct ixgbe_hw *hw,
u8 **mc_addr_ptr, u32 *vmdq)
{
u8 *mc_addr;