* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* invalid.
*/
-int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf);
+int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf);
/**
* Set the VF MAC address.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
*/
-int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
+int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf,
struct ether_addr *mac_addr);
/**
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf,
+ uint8_t on);
/**
* Enable/Disable VF MAC anti spoofing.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan insert
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf,
+int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf,
uint16_t vlan_id);
/**
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on);
+int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on);
/**
* set all queues drop enable bit
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on);
+int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on);
/**
* set drop enable bit in the VF split rx control register
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan strip for all queues in a pool
* - (-EINVAL) if bad parameter.
*/
int
-rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable MACsec offload.
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
*/
-int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp);
+int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp);
/**
* Disable MACsec offload.
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
*/
-int rte_pmd_ixgbe_macsec_disable(uint8_t port);
+int rte_pmd_ixgbe_macsec_disable(uint16_t port);
/**
* Configure Tx SC (Secure Connection).
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
*/
-int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac);
+int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac);
/**
* Configure Rx SC (Secure Connection).
* - (-ENODEV) if *port* invalid.
* - (-ENOTSUP) if hardware doesn't support this feature.
*/
-int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi);
+int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi);
/**
* Enable Tx SA (Secure Association).
* - (-ENOTSUP) if hardware doesn't support this feature.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an,
+int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an,
uint32_t pn, uint8_t *key);
/**
* - (-ENOTSUP) if hardware doesn't support this feature.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an,
+int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an,
uint32_t pn, uint8_t *key);
/**
* - (-EINVAL) if bad parameter.
*/
int
-rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on);
+rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask,
+ uint8_t on);
/**
* Enable or disable a VF traffic receive of an Ethernet device.
* - (-EINVAL) if bad parameter.
*/
int
-rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable or disable a VF traffic transmit of the Ethernet device.
* - (-EINVAL) if bad parameter.
*/
int
-rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
* - (-EINVAL) if bad parameter.
*/
int
-rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on);
+rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan,
+ uint64_t vf_mask, uint8_t vlan_on);
/**
* Set the rate limitation for a vf on an Ethernet device.
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk);
+int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf,
+ uint16_t tx_rate, uint64_t q_msk);
/**
* Set all the TCs' bandwidth weight.
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
-int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
+int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port,
uint8_t tc_num,
uint8_t *bw_weight);
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_init(uint8_t port);
+int rte_pmd_ixgbe_bypass_init(uint16_t port);
/**
* Return bypass state.
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state);
+int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state);
/**
* Set bypass state
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state);
+int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state);
/**
* Return bypass state when given event occurs.
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_event_show(uint8_t port,
+int rte_pmd_ixgbe_bypass_event_show(uint16_t port,
uint32_t event,
uint32_t *state);
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_event_store(uint8_t port,
+int rte_pmd_ixgbe_bypass_event_store(uint16_t port,
uint32_t event,
uint32_t state);
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout);
+int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout);
/**
* Get bypass firmware version.
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver);
+int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver);
/**
* Return bypass watchdog timeout in seconds
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
+int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
/**
* Reset bypass watchdog timer
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_bypass_wd_reset(uint8_t port);
+int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
/**