net/i40e: add outer VLAN processing

[dpdk.git] / drivers / net / ixgbe / rte_pmd_ixgbe.h

diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 8b6bb99..426fe58 100644 (file)
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -11,7 +11,9 @@
 #ifndef _PMD_IXGBE_H_
 #define _PMD_IXGBE_H_
 
-#include <rte_ethdev_driver.h>
+#include <rte_compat.h>
+#include <rte_ethdev.h>
+#include <rte_ether.h>
 
 /**
  * Notify VF when PF link status changes.
@@ -283,8 +285,8 @@ int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an,
 * @param rx_mask
 *    The RX mode mask, which is one or more of accepting Untagged Packets,
 *    packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
-*    ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
-*    ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
+*    RTE_ETH_VMDQ_ACCEPT_UNTAG, RTE_ETH_VMDQ_ACCEPT_HASH_UC,
+*    RTE_ETH_VMDQ_ACCEPT_BROADCAST and RTE_ETH_VMDQ_ACCEPT_MULTICAST will be used
 *    in rx_mode.
 * @param on
 *    1 - Enable a VF RX mode.
@@ -584,7 +586,6 @@ int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
  *   - (-ENODEV) if *port* invalid.
  *   - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
  */
-__rte_experimental
 int
 rte_pmd_ixgbe_mdio_lock(uint16_t port);
 
@@ -598,7 +599,6 @@ rte_pmd_ixgbe_mdio_lock(uint16_t port);
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-ENODEV) if *port* invalid.
  */
-__rte_experimental
 int
 rte_pmd_ixgbe_mdio_unlock(uint16_t port);
 
@@ -620,7 +620,6 @@ rte_pmd_ixgbe_mdio_unlock(uint16_t port);
  *   - (-ENODEV) if *port* invalid.
  *   - (IXGBE_ERR_PHY) If PHY read command failed
  */
-__rte_experimental
 int
 rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
                                 uint32_t dev_type, uint16_t *phy_data);
@@ -644,7 +643,6 @@ rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
  *   - (-ENODEV) if *port* invalid.
  *   - (IXGBE_ERR_PHY) If PHY read command failed
  */
-__rte_experimental
 int
 rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
                                  uint32_t dev_type, uint16_t phy_data);
@@ -723,7 +721,6 @@ enum {
  *   - (-ENODEV) if *port* invalid.
  *   - (-ENOTSUP) if hardware doesn't support this feature.
  */
-__rte_experimental
 int
 rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);