*/
int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk);
+/**
+ * Set all the TCs' bandwidth weight.
+ *
+ * The bw_weight means the percentage occupied by the TC.
+ * It can be taken as the relative min bandwidth setting.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param tc_num
+ * Number of TCs.
+ * @param bw_weight
+ * An array of relative bandwidth weight for all the TCs.
+ * The summary of the bw_weight should be 100.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
+ uint8_t tc_num,
+ uint8_t *bw_weight);
+
+
+/**
+ * Initialize bypass logic. This function needs to be called before
+ * executing any other bypass API.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_init(uint8_t port);
+
+/**
+ * Return bypass state.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param state
+ * The return bypass state.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state);
+
+/**
+ * Set bypass state
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param new_state
+ * The current bypass state.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state);
+
+/**
+ * Return bypass state when given event occurs.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param event
+ * The bypass event
+ * - (1) Main power on (power button is pushed)
+ * - (2) Auxiliary power on (power supply is being plugged)
+ * - (3) Main power off (system shutdown and power supply is left plugged in)
+ * - (4) Auxiliary power off (power supply is being unplugged)
+ * - (5) Display or set the watchdog timer
+ * @param state
+ * The bypass state when given event occurred.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_show(uint8_t port,
+ uint32_t event,
+ uint32_t *state);
+
+/**
+ * Set bypass state when given event occurs.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param event
+ * The bypass event
+ * - (1) Main power on (power button is pushed)
+ * - (2) Auxiliary power on (power supply is being plugged)
+ * - (3) Main power off (system shutdown and power supply is left plugged in)
+ * - (4) Auxiliary power off (power supply is being unplugged)
+ * - (5) Display or set the watchdog timer
+ * @param state
+ * The assigned state when given event occurs.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_store(uint8_t port,
+ uint32_t event,
+ uint32_t state);
+
+/**
+ * Set bypass watchdog timeout count.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param timeout
+ * The timeout to be set.
+ * - (0) 0 seconds (timer is off)
+ * - (1) 1.5 seconds
+ * - (2) 2 seconds
+ * - (3) 3 seconds
+ * - (4) 4 seconds
+ * - (5) 8 seconds
+ * - (6) 16 seconds
+ * - (7) 32 seconds
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout);
+
+/**
+ * Get bypass firmware version.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param ver
+ * The firmware version
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver);
+
+/**
+ * Return bypass watchdog timeout in seconds
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param wd_timeout
+ * The return watchdog timeout. "0" represents timer expired
+ * - (0) 0 seconds (timer is off)
+ * - (1) 1.5 seconds
+ * - (2) 2 seconds
+ * - (3) 3 seconds
+ * - (4) 4 seconds
+ * - (5) 8 seconds
+ * - (6) 16 seconds
+ * - (7) 32 seconds
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
+
+/**
+ * Reset bypass watchdog timer
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_reset(uint8_t port);
+
+
/**
* Response sent back to ixgbe driver from user app after callback
*/
uint16_t retval; /**< return value */
void *msg; /**< pointer to message */
};
+enum {
+ RTE_PMD_IXGBE_BYPASS_MODE_NONE,
+ RTE_PMD_IXGBE_BYPASS_MODE_NORMAL,
+ RTE_PMD_IXGBE_BYPASS_MODE_BYPASS,
+ RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE,
+ RTE_PMD_IXGBE_BYPASS_MODE_NUM,
+};
+
+#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x) \
+ ((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE && \
+ (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+ RTE_PMD_IXGBE_BYPASS_EVENT_NONE,
+ RTE_PMD_IXGBE_BYPASS_EVENT_START,
+ RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START,
+ RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON,
+ RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF,
+ RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF,
+ RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT,
+ RTE_PMD_IXGBE_BYPASS_EVENT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x) \
+ ((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \
+ (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+ RTE_PMD_IXGBE_BYPASS_TMT_OFF, /* timeout disabled. */
+ RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x) \
+ ((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \
+ ((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \
+ (x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
+
#endif /* _PMD_IXGBE_H_ */
git.droids-corp.org / dpdk.git / blobdiff