-/*-
- * BSD LICENSE
- *
- * Copyright (c) 2016 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016 Intel Corporation
*/
/**
#ifndef _PMD_IXGBE_H_
#define _PMD_IXGBE_H_
+#include <rte_compat.h>
#include <rte_ethdev.h>
+#include <rte_ether.h>
/**
* Notify VF when PF link status changes.
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
*/
int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf,
- struct ether_addr *mac_addr);
+ struct rte_ether_addr *mac_addr);
/**
* Enable/Disable VF VLAN anti spoofing.
* @param rx_mask
* The RX mode mask, which is one or more of accepting Untagged Packets,
* packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
-* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
-* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
+* RTE_ETH_VMDQ_ACCEPT_UNTAG, RTE_ETH_VMDQ_ACCEPT_HASH_UC,
+* RTE_ETH_VMDQ_ACCEPT_BROADCAST and RTE_ETH_VMDQ_ACCEPT_MULTICAST will be used
* in rx_mode.
* @param on
* 1 - Enable a VF RX mode.
*/
int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
+/**
+ * Acquire swfw semaphore lock for MDIO access
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
+ */
+__rte_experimental
+int
+rte_pmd_ixgbe_mdio_lock(uint16_t port);
+
+/**
+ * Release swfw semaphore lock used for MDIO access
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ */
+__rte_experimental
+int
+rte_pmd_ixgbe_mdio_unlock(uint16_t port);
+
+/**
+ * Read PHY register using MDIO without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param reg_addr
+ * 32 bit PHY Register
+ * @param dev_type
+ * Used to define device base address
+ * @param phy_data
+ * Pointer for reading PHY register data
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+__rte_experimental
+int
+rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
+ uint32_t dev_type, uint16_t *phy_data);
+
+/**
+ * Write data to PHY register using without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param reg_addr
+ * 32 bit PHY Register
+ * @param dev_type
+ * Used to define device base address
+ * @param phy_data
+ * Data to write to PHY register
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+__rte_experimental
+int
+rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
+ uint32_t dev_type, uint16_t phy_data);
/**
* Response sent back to ixgbe driver from user app after callback
((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \
(x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
+/**
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param enable
+ * 0 to disable and nonzero to enable 'SBP' bit in FCTRL register
+ * to receive all packets
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+__rte_experimental
+int
+rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);
+
+/**
+ * Get port fdir info
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param fdir_info
+ * The fdir info of the port
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if operation not supported.
+ */
+__rte_experimental
+int
+rte_pmd_ixgbe_get_fdir_info(uint16_t port, struct rte_eth_fdir_info *fdir_info);
+
+/**
+ * Get port fdir status
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param fdir_stats
+ * The fdir status of the port
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-ENOTSUP) if operation not supported.
+ */
+__rte_experimental
+int
+rte_pmd_ixgbe_get_fdir_stats(uint16_t port,
+ struct rte_eth_fdir_stats *fdir_stats);
#endif /* _PMD_IXGBE_H_ */
git.droids-corp.org / dpdk.git / blobdiff