-/*-
- * BSD LICENSE
- *
- * Copyright 2017 6WIND S.A.
- * Copyright 2017 Mellanox
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox Technologies, Ltd
*/
/**
#include <rte_common.h>
#include <rte_errno.h>
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
#include <rte_malloc.h>
#include <rte_mbuf.h>
#include <rte_mempool.h>
#include "mlx4.h"
+#include "mlx4_glue.h"
#include "mlx4_prm.h"
#include "mlx4_rxtx.h"
#include "mlx4_utils.h"
return offloads;
}
-/**
- * Checks if the per-queue offload configuration is valid.
- *
- * @param priv
- * Pointer to private structure.
- * @param requested
- * Per-queue offloads configuration.
- *
- * @return
- * Nonzero when configuration is valid.
- */
-static int
-mlx4_check_tx_queue_offloads(struct priv *priv, uint64_t requested)
-{
- uint64_t mandatory = priv->dev->data->dev_conf.txmode.offloads;
- uint64_t supported = mlx4_get_tx_port_offloads(priv);
-
- return !((mandatory ^ requested) & supported);
-}
-
/**
* DPDK callback to configure a Tx queue.
*
},
};
int ret;
+ uint64_t offloads;
+
+ offloads = conf->offloads | dev->data->dev_conf.txmode.offloads;
DEBUG("%p: configuring queue %u for %u descriptors",
(void *)dev, idx, desc);
- /*
- * Don't verify port offloads for application which
- * use the old API.
- */
- if ((conf->txq_flags & ETH_TXQ_FLAGS_IGNORE) &&
- !mlx4_check_tx_queue_offloads(priv, conf->offloads)) {
- rte_errno = ENOTSUP;
- ERROR("%p: Tx queue offloads 0x%" PRIx64 " don't match port "
- "offloads 0x%" PRIx64 " or supported offloads 0x%" PRIx64,
- (void *)dev, conf->offloads,
- dev->data->dev_conf.txmode.offloads,
- mlx4_get_tx_port_offloads(priv));
- return -rte_errno;
- }
+
if (idx >= dev->data->nb_tx_queues) {
rte_errno = EOVERFLOW;
ERROR("%p: queue index out of range (%u >= %u)",
.elts_comp_cd_init =
RTE_MIN(MLX4_PMD_TX_PER_COMP_REQ, desc / 4),
.csum = priv->hw_csum &&
- (conf->offloads & (DEV_TX_OFFLOAD_IPV4_CKSUM |
+ (offloads & (DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM)),
.csum_l2tun = priv->hw_csum_l2tun &&
- (conf->offloads &
+ (offloads &
DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM),
/* Enable Tx loopback for VF devices. */
.lb = !!priv->vf,
.bounce_buf = bounce_buf,
};
- txq->cq = ibv_create_cq(priv->ctx, desc, NULL, NULL, 0);
+ txq->cq = mlx4_glue->create_cq(priv->ctx, desc, NULL, NULL, 0);
if (!txq->cq) {
rte_errno = ENOMEM;
ERROR("%p: CQ creation failure: %s",
/* No completion events must occur by default. */
.sq_sig_all = 0,
};
- txq->qp = ibv_create_qp(priv->pd, &qp_init_attr);
+ txq->qp = mlx4_glue->create_qp(priv->pd, &qp_init_attr);
if (!txq->qp) {
rte_errno = errno ? errno : EINVAL;
ERROR("%p: QP creation failure: %s",
goto error;
}
txq->max_inline = qp_init_attr.cap.max_inline_data;
- ret = ibv_modify_qp
+ ret = mlx4_glue->modify_qp
(txq->qp,
&(struct ibv_qp_attr){
.qp_state = IBV_QPS_INIT,
(void *)dev, strerror(rte_errno));
goto error;
}
- ret = ibv_modify_qp
+ ret = mlx4_glue->modify_qp
(txq->qp,
&(struct ibv_qp_attr){
.qp_state = IBV_QPS_RTR,
(void *)dev, strerror(rte_errno));
goto error;
}
- ret = ibv_modify_qp
+ ret = mlx4_glue->modify_qp
(txq->qp,
&(struct ibv_qp_attr){
.qp_state = IBV_QPS_RTS,
mlxdv.cq.out = &dv_cq;
mlxdv.qp.in = txq->qp;
mlxdv.qp.out = &dv_qp;
- ret = mlx4dv_init_obj(&mlxdv, MLX4DV_OBJ_QP | MLX4DV_OBJ_CQ);
+ ret = mlx4_glue->dv_init_obj(&mlxdv, MLX4DV_OBJ_QP | MLX4DV_OBJ_CQ);
if (ret) {
rte_errno = EINVAL;
ERROR("%p: failed to obtain information needed for"
}
mlx4_txq_free_elts(txq);
if (txq->qp)
- claim_zero(ibv_destroy_qp(txq->qp));
+ claim_zero(mlx4_glue->destroy_qp(txq->qp));
if (txq->cq)
- claim_zero(ibv_destroy_cq(txq->cq));
+ claim_zero(mlx4_glue->destroy_cq(txq->cq));
for (i = 0; i != RTE_DIM(txq->mp2mr); ++i) {
if (!txq->mp2mr[i].mp)
break;