#include <fcntl.h>
#include <rte_malloc.h>
-#include <rte_ethdev_driver.h>
-#include <rte_ethdev_pci.h>
+#include <ethdev_driver.h>
+#include <ethdev_pci.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_common.h>
int err = 0;
unsigned int hw_padding = 0;
unsigned int mps;
- unsigned int cqe_comp;
- unsigned int cqe_pad = 0;
unsigned int tunnel_en = 0;
unsigned int mpls_en = 0;
unsigned int swp = 0;
mprq_caps.max_single_wqe_log_num_of_strides;
}
#endif
- if (RTE_CACHE_LINE_SIZE == 128 &&
- !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
- cqe_comp = 0;
- else
- cqe_comp = 1;
- config->cqe_comp = cqe_comp;
-#ifdef HAVE_IBV_MLX5_MOD_CQE_128B_PAD
- /* Whether device supports 128B Rx CQE padding. */
- cqe_pad = RTE_CACHE_LINE_SIZE == 128 &&
- (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_PAD);
-#endif
+ /* Rx CQE compression is enabled by default. */
+ config->cqe_comp = 1;
#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
tunnel_en = ((dv_attr.tunnel_offloads_caps &
priv->dev_port = spawn->phys_port;
priv->pci_dev = spawn->pci_dev;
priv->mtu = RTE_ETHER_MTU;
- priv->mp_id.port_id = port_id;
- strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
/* Some internal functions rely on Netlink sockets, open them now. */
priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
config->mps == MLX5_MPW ? "legacy " : "",
config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
- if (config->cqe_comp && !cqe_comp) {
- DRV_LOG(WARNING, "Rx CQE compression isn't supported");
- config->cqe_comp = 0;
- }
- if (config->cqe_pad && !cqe_pad) {
- DRV_LOG(WARNING, "Rx CQE padding isn't supported");
- config->cqe_pad = 0;
- } else if (config->cqe_pad) {
- DRV_LOG(INFO, "Rx CQE padding is enabled");
- }
if (config->devx) {
err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config->hca_attr);
if (err) {
}
#if defined(HAVE_MLX5DV_DR) && defined(HAVE_MLX5_DR_CREATE_ACTION_FLOW_METER)
if (config->hca_attr.qos.sup &&
- config->hca_attr.qos.srtcm_sup &&
+ config->hca_attr.qos.flow_meter_old &&
config->dv_flow_en) {
uint8_t reg_c_mask =
config->hca_attr.qos.flow_meter_reg_c_ids;
- 1 + REG_C_0;
priv->mtr_en = 1;
priv->mtr_reg_share =
- config->hca_attr.qos.flow_meter_reg_share;
+ config->hca_attr.qos.flow_meter;
DRV_LOG(DEBUG, "The REG_C meter uses is %d",
priv->mtr_color_reg);
}
}
#endif
}
+ if (config->cqe_comp && RTE_CACHE_LINE_SIZE == 128 &&
+ !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP)) {
+ DRV_LOG(WARNING, "Rx CQE 128B compression is not supported");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_FTAG_STRIDX &&
+ (!config->devx || !config->hca_attr.mini_cqe_resp_flow_tag)) {
+ DRV_LOG(WARNING, "Flow Tag CQE compression"
+ " format isn't supported.");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_L34H_STRIDX &&
+ (!config->devx || !config->hca_attr.mini_cqe_resp_l3_l4_tag)) {
+ DRV_LOG(WARNING, "L3/L4 Header CQE compression"
+ " format isn't supported.");
+ config->cqe_comp = 0;
+ }
+ DRV_LOG(DEBUG, "Rx CQE compression is %ssupported",
+ config->cqe_comp ? "" : "not ");
if (config->tx_pp) {
DRV_LOG(DEBUG, "Timestamp counter frequency %u kHz",
config->hca_attr.dev_freq_khz);
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
eth_dev->data->representor_id = priv->representor_id;
}
+ priv->mp_id.port_id = eth_dev->data->port_id;
+ strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
/*
* Store associated network device interface index. This index
* is permanent throughout the lifetime of device. So, we may store