#include <fcntl.h>
#include <rte_malloc.h>
-#include <rte_ethdev_driver.h>
-#include <rte_ethdev_pci.h>
+#include <ethdev_driver.h>
+#include <ethdev_pci.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
+#include <rte_bus_auxiliary.h>
#include <rte_common.h>
#include <rte_kvargs.h>
#include <rte_rwlock.h>
#include "mlx5_common_os.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
+#include "mlx5_rx.h"
+#include "mlx5_tx.h"
#include "mlx5_autoconf.h"
#include "mlx5_mr.h"
#include "mlx5_flow.h"
#include "mlx5_nl.h"
#include "mlx5_devx.h"
-#define MLX5_TAGS_HLIST_ARRAY_SIZE 8192
-
#ifndef HAVE_IBV_MLX5_MOD_MPW
#define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
#define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
/* Process local data for secondary processes. */
static struct mlx5_local_data mlx5_local_data;
+/* rte flow indexed pool configuration. */
+static struct mlx5_indexed_pool_config icfg[] = {
+ {
+ .size = sizeof(struct rte_flow),
+ .trunk_size = 64,
+ .need_lock = 1,
+ .release_mem_en = 0,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
+ .per_core_cache = 0,
+ .type = "ctl_flow_ipool",
+ },
+ {
+ .size = sizeof(struct rte_flow),
+ .trunk_size = 64,
+ .grow_trunk = 3,
+ .grow_shift = 2,
+ .need_lock = 1,
+ .release_mem_en = 0,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
+ .per_core_cache = 1 << 14,
+ .type = "rte_flow_ipool",
+ },
+ {
+ .size = sizeof(struct rte_flow),
+ .trunk_size = 64,
+ .grow_trunk = 3,
+ .grow_shift = 2,
+ .need_lock = 1,
+ .release_mem_en = 0,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
+ .per_core_cache = 0,
+ .type = "mcp_flow_ipool",
+ },
+};
+
/**
* Set the completion channel file descriptor interrupt as non-blocking.
*
device_attr->max_qp_wr = attr_ex.orig_attr.max_qp_wr;
device_attr->max_sge = attr_ex.orig_attr.max_sge;
device_attr->max_cq = attr_ex.orig_attr.max_cq;
+ device_attr->max_cqe = attr_ex.orig_attr.max_cqe;
+ device_attr->max_mr = attr_ex.orig_attr.max_mr;
+ device_attr->max_pd = attr_ex.orig_attr.max_pd;
device_attr->max_qp = attr_ex.orig_attr.max_qp;
+ device_attr->max_srq = attr_ex.orig_attr.max_srq;
+ device_attr->max_srq_wr = attr_ex.orig_attr.max_srq_wr;
device_attr->raw_packet_caps = attr_ex.raw_packet_caps;
device_attr->max_rwq_indirection_table_size =
attr_ex.rss_caps.max_rwq_indirection_table_size;
#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
device_attr->tunnel_offloads_caps = dv_attr.tunnel_offloads_caps;
#endif
+ strlcpy(device_attr->fw_ver, attr_ex.orig_attr.fw_ver,
+ sizeof(device_attr->fw_ver));
return err;
}
static void *
mlx5_alloc_verbs_buf(size_t size, void *data)
{
- struct mlx5_priv *priv = data;
+ struct mlx5_dev_ctx_shared *sh = data;
void *ret;
- unsigned int socket = SOCKET_ID_ANY;
size_t alignment = rte_mem_page_size();
if (alignment == (size_t)-1) {
DRV_LOG(ERR, "Failed to get mem page size");
return NULL;
}
- if (priv->verbs_alloc_ctx.type == MLX5_VERBS_ALLOC_TYPE_TX_QUEUE) {
- const struct mlx5_txq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
-
- socket = ctrl->socket;
- } else if (priv->verbs_alloc_ctx.type ==
- MLX5_VERBS_ALLOC_TYPE_RX_QUEUE) {
- const struct mlx5_rxq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
-
- socket = ctrl->socket;
- }
MLX5_ASSERT(data != NULL);
- ret = mlx5_malloc(0, size, alignment, socket);
+ ret = mlx5_malloc(0, size, alignment, sh->numa_node);
if (!ret && size)
rte_errno = ENOMEM;
return ret;
}
+/**
+ * Detect misc5 support or not
+ *
+ * @param[in] priv
+ * Device private data pointer
+ */
+#ifdef HAVE_MLX5DV_DR
+static void
+__mlx5_discovery_misc5_cap(struct mlx5_priv *priv)
+{
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+ /* Dummy VxLAN matcher to detect rdma-core misc5 cap
+ * Case: IPv4--->UDP--->VxLAN--->vni
+ */
+ void *tbl;
+ struct mlx5_flow_dv_match_params matcher_mask;
+ void *match_m;
+ void *matcher;
+ void *headers_m;
+ void *misc5_m;
+ uint32_t *tunnel_header_m;
+ struct mlx5dv_flow_matcher_attr dv_attr;
+
+ memset(&matcher_mask, 0, sizeof(matcher_mask));
+ matcher_mask.size = sizeof(matcher_mask.buf);
+ match_m = matcher_mask.buf;
+ headers_m = MLX5_ADDR_OF(fte_match_param, match_m, outer_headers);
+ misc5_m = MLX5_ADDR_OF(fte_match_param,
+ match_m, misc_parameters_5);
+ tunnel_header_m = (uint32_t *)
+ MLX5_ADDR_OF(fte_match_set_misc5,
+ misc5_m, tunnel_header_1);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xff);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_version, 4);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport, 0xffff);
+ *tunnel_header_m = 0xffffff;
+
+ tbl = mlx5_glue->dr_create_flow_tbl(priv->sh->rx_domain, 1);
+ if (!tbl) {
+ DRV_LOG(INFO, "No SW steering support");
+ return;
+ }
+ dv_attr.type = IBV_FLOW_ATTR_NORMAL,
+ dv_attr.match_mask = (void *)&matcher_mask,
+ dv_attr.match_criteria_enable =
+ (1 << MLX5_MATCH_CRITERIA_ENABLE_OUTER_BIT) |
+ (1 << MLX5_MATCH_CRITERIA_ENABLE_MISC5_BIT);
+ dv_attr.priority = 3;
+#ifdef HAVE_MLX5DV_DR_ESWITCH
+ void *misc2_m;
+ if (priv->config.dv_esw_en) {
+ /* FDB enabled reg_c_0 */
+ dv_attr.match_criteria_enable |=
+ (1 << MLX5_MATCH_CRITERIA_ENABLE_MISC2_BIT);
+ misc2_m = MLX5_ADDR_OF(fte_match_param,
+ match_m, misc_parameters_2);
+ MLX5_SET(fte_match_set_misc2, misc2_m,
+ metadata_reg_c_0, 0xffff);
+ }
+#endif
+ matcher = mlx5_glue->dv_create_flow_matcher(priv->sh->ctx,
+ &dv_attr, tbl);
+ if (matcher) {
+ priv->sh->misc5_cap = 1;
+ mlx5_glue->dv_destroy_flow_matcher(matcher);
+ }
+ mlx5_glue->dr_destroy_flow_tbl(tbl);
+#else
+ RTE_SET_USED(priv);
+#endif
+}
+#endif
+
/**
* Verbs callback to free a memory.
*
mlx5_alloc_shared_dr(struct mlx5_priv *priv)
{
struct mlx5_dev_ctx_shared *sh = priv->sh;
- char s[MLX5_HLIST_NAMESIZE] __rte_unused;
+ char s[MLX5_NAME_SIZE] __rte_unused;
int err;
MLX5_ASSERT(sh && sh->refcnt);
goto error;
/* The resources below are only valid with DV support. */
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
- /* Init port id action cache list. */
- snprintf(s, sizeof(s), "%s_port_id_action_cache", sh->ibdev_name);
- mlx5_cache_list_init(&sh->port_id_action_list, s, 0, sh,
- flow_dv_port_id_create_cb,
- flow_dv_port_id_match_cb,
- flow_dv_port_id_remove_cb);
- /* Init push vlan action cache list. */
- snprintf(s, sizeof(s), "%s_push_vlan_action_cache", sh->ibdev_name);
- mlx5_cache_list_init(&sh->push_vlan_action_list, s, 0, sh,
- flow_dv_push_vlan_create_cb,
- flow_dv_push_vlan_match_cb,
- flow_dv_push_vlan_remove_cb);
- /* Init sample action cache list. */
- snprintf(s, sizeof(s), "%s_sample_action_cache", sh->ibdev_name);
- mlx5_cache_list_init(&sh->sample_action_list, s, 0, sh,
- flow_dv_sample_create_cb,
- flow_dv_sample_match_cb,
- flow_dv_sample_remove_cb);
- /* Init dest array action cache list. */
- snprintf(s, sizeof(s), "%s_dest_array_cache", sh->ibdev_name);
- mlx5_cache_list_init(&sh->dest_array_list, s, 0, sh,
- flow_dv_dest_array_create_cb,
- flow_dv_dest_array_match_cb,
- flow_dv_dest_array_remove_cb);
- /* Create tags hash list table. */
- snprintf(s, sizeof(s), "%s_tags", sh->ibdev_name);
- sh->tag_table = mlx5_hlist_create(s, MLX5_TAGS_HLIST_ARRAY_SIZE, 0,
- MLX5_HLIST_WRITE_MOST,
- flow_dv_tag_create_cb, NULL,
- flow_dv_tag_remove_cb);
- if (!sh->tag_table) {
- DRV_LOG(ERR, "tags with hash creation failed.");
- err = ENOMEM;
+ /* Init port id action list. */
+ snprintf(s, sizeof(s), "%s_port_id_action_list", sh->ibdev_name);
+ sh->port_id_action_list = mlx5_list_create(s, sh, true,
+ flow_dv_port_id_create_cb,
+ flow_dv_port_id_match_cb,
+ flow_dv_port_id_remove_cb,
+ flow_dv_port_id_clone_cb,
+ flow_dv_port_id_clone_free_cb);
+ if (!sh->port_id_action_list)
goto error;
- }
- sh->tag_table->ctx = sh;
- snprintf(s, sizeof(s), "%s_hdr_modify", sh->ibdev_name);
- sh->modify_cmds = mlx5_hlist_create(s, MLX5_FLOW_HDR_MODIFY_HTABLE_SZ,
- 0, MLX5_HLIST_WRITE_MOST |
- MLX5_HLIST_DIRECT_KEY,
- flow_dv_modify_create_cb,
- flow_dv_modify_match_cb,
- flow_dv_modify_remove_cb);
- if (!sh->modify_cmds) {
- DRV_LOG(ERR, "hdr modify hash creation failed");
- err = ENOMEM;
+ /* Init push vlan action list. */
+ snprintf(s, sizeof(s), "%s_push_vlan_action_list", sh->ibdev_name);
+ sh->push_vlan_action_list = mlx5_list_create(s, sh, true,
+ flow_dv_push_vlan_create_cb,
+ flow_dv_push_vlan_match_cb,
+ flow_dv_push_vlan_remove_cb,
+ flow_dv_push_vlan_clone_cb,
+ flow_dv_push_vlan_clone_free_cb);
+ if (!sh->push_vlan_action_list)
goto error;
- }
- sh->modify_cmds->ctx = sh;
- snprintf(s, sizeof(s), "%s_encaps_decaps", sh->ibdev_name);
- sh->encaps_decaps = mlx5_hlist_create(s,
- MLX5_FLOW_ENCAP_DECAP_HTABLE_SZ,
- 0, MLX5_HLIST_DIRECT_KEY |
- MLX5_HLIST_WRITE_MOST,
- flow_dv_encap_decap_create_cb,
- flow_dv_encap_decap_match_cb,
- flow_dv_encap_decap_remove_cb);
- if (!sh->encaps_decaps) {
- DRV_LOG(ERR, "encap decap hash creation failed");
- err = ENOMEM;
+ /* Init sample action list. */
+ snprintf(s, sizeof(s), "%s_sample_action_list", sh->ibdev_name);
+ sh->sample_action_list = mlx5_list_create(s, sh, true,
+ flow_dv_sample_create_cb,
+ flow_dv_sample_match_cb,
+ flow_dv_sample_remove_cb,
+ flow_dv_sample_clone_cb,
+ flow_dv_sample_clone_free_cb);
+ if (!sh->sample_action_list)
+ goto error;
+ /* Init dest array action list. */
+ snprintf(s, sizeof(s), "%s_dest_array_list", sh->ibdev_name);
+ sh->dest_array_list = mlx5_list_create(s, sh, true,
+ flow_dv_dest_array_create_cb,
+ flow_dv_dest_array_match_cb,
+ flow_dv_dest_array_remove_cb,
+ flow_dv_dest_array_clone_cb,
+ flow_dv_dest_array_clone_free_cb);
+ if (!sh->dest_array_list)
goto error;
- }
- sh->encaps_decaps->ctx = sh;
#endif
#ifdef HAVE_MLX5DV_DR
void *domain;
goto error;
}
sh->fdb_domain = domain;
- sh->esw_drop_action = mlx5_glue->dr_create_flow_action_drop();
+ }
+ /*
+ * The drop action is just some dummy placeholder in rdma-core. It
+ * does not belong to domains and has no any attributes, and, can be
+ * shared by the entire device.
+ */
+ sh->dr_drop_action = mlx5_glue->dr_create_flow_action_drop();
+ if (!sh->dr_drop_action) {
+ DRV_LOG(ERR, "FDB mlx5dv_dr_create_flow_action_drop");
+ err = errno;
+ goto error;
}
#endif
- if (!sh->tunnel_hub)
+ if (!sh->tunnel_hub && priv->config.dv_miss_info)
err = mlx5_alloc_tunnel_hub(sh);
if (err) {
DRV_LOG(ERR, "mlx5_alloc_tunnel_hub failed err=%d", err);
mlx5_glue->dr_reclaim_domain_memory(sh->fdb_domain, 1);
}
sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan();
+ if (!priv->config.allow_duplicate_pattern) {
+#ifndef HAVE_MLX5_DR_ALLOW_DUPLICATE
+ DRV_LOG(WARNING, "Disallow duplicate pattern is not supported - maybe old rdma-core version?");
+#endif
+ mlx5_glue->dr_allow_duplicate_rules(sh->rx_domain, 0);
+ mlx5_glue->dr_allow_duplicate_rules(sh->tx_domain, 0);
+ if (sh->fdb_domain)
+ mlx5_glue->dr_allow_duplicate_rules(sh->fdb_domain, 0);
+ }
+
+ __mlx5_discovery_misc5_cap(priv);
#endif /* HAVE_MLX5DV_DR */
sh->default_miss_action =
mlx5_glue->dr_create_flow_action_default_miss();
mlx5_glue->dr_destroy_domain(sh->fdb_domain);
sh->fdb_domain = NULL;
}
- if (sh->esw_drop_action) {
- mlx5_glue->destroy_flow_action(sh->esw_drop_action);
- sh->esw_drop_action = NULL;
+ if (sh->dr_drop_action) {
+ mlx5_glue->destroy_flow_action(sh->dr_drop_action);
+ sh->dr_drop_action = NULL;
}
if (sh->pop_vlan_action) {
mlx5_glue->destroy_flow_action(sh->pop_vlan_action);
sh->tunnel_hub = NULL;
}
mlx5_free_table_hash_list(priv);
+ if (sh->port_id_action_list) {
+ mlx5_list_destroy(sh->port_id_action_list);
+ sh->port_id_action_list = NULL;
+ }
+ if (sh->push_vlan_action_list) {
+ mlx5_list_destroy(sh->push_vlan_action_list);
+ sh->push_vlan_action_list = NULL;
+ }
+ if (sh->sample_action_list) {
+ mlx5_list_destroy(sh->sample_action_list);
+ sh->sample_action_list = NULL;
+ }
+ if (sh->dest_array_list) {
+ mlx5_list_destroy(sh->dest_array_list);
+ sh->dest_array_list = NULL;
+ }
return err;
}
mlx5_glue->dr_destroy_domain(sh->fdb_domain);
sh->fdb_domain = NULL;
}
- if (sh->esw_drop_action) {
- mlx5_glue->destroy_flow_action(sh->esw_drop_action);
- sh->esw_drop_action = NULL;
+ if (sh->dr_drop_action) {
+ mlx5_glue->destroy_flow_action(sh->dr_drop_action);
+ sh->dr_drop_action = NULL;
}
#endif
if (sh->pop_vlan_action) {
mlx5_release_tunnel_hub(sh, priv->dev_port);
sh->tunnel_hub = NULL;
}
- mlx5_cache_list_destroy(&sh->port_id_action_list);
- mlx5_cache_list_destroy(&sh->push_vlan_action_list);
mlx5_free_table_hash_list(priv);
+ if (sh->port_id_action_list) {
+ mlx5_list_destroy(sh->port_id_action_list);
+ sh->port_id_action_list = NULL;
+ }
+ if (sh->push_vlan_action_list) {
+ mlx5_list_destroy(sh->push_vlan_action_list);
+ sh->push_vlan_action_list = NULL;
+ }
+ if (sh->sample_action_list) {
+ mlx5_list_destroy(sh->sample_action_list);
+ sh->sample_action_list = NULL;
+ }
+ if (sh->dest_array_list) {
+ mlx5_list_destroy(sh->dest_array_list);
+ sh->dest_array_list = NULL;
+ }
}
/**
#endif
}
+/**
+ * DR flow drop action support detect.
+ *
+ * @param dev
+ * Pointer to rte_eth_dev structure.
+ *
+ */
+static void
+mlx5_flow_drop_action_config(struct rte_eth_dev *dev __rte_unused)
+{
+#ifdef HAVE_MLX5DV_DR
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!priv->config.dv_flow_en || !priv->sh->dr_drop_action)
+ return;
+ /**
+ * DR supports drop action placeholder when it is supported;
+ * otherwise, use the queue drop action.
+ */
+ if (mlx5_flow_discover_dr_action_support(dev))
+ priv->root_drop_action = priv->drop_queue.hrxq->action;
+ else
+ priv->root_drop_action = priv->sh->dr_drop_action;
+#endif
+}
+
+static void
+mlx5_queue_counter_id_prepare(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ void *ctx = priv->sh->ctx;
+
+ priv->q_counters = mlx5_devx_cmd_queue_counter_alloc(ctx);
+ if (!priv->q_counters) {
+ struct ibv_cq *cq = mlx5_glue->create_cq(ctx, 1, NULL, NULL, 0);
+ struct ibv_wq *wq;
+
+ DRV_LOG(DEBUG, "Port %d queue counter object cannot be created "
+ "by DevX - fall-back to use the kernel driver global "
+ "queue counter.", dev->data->port_id);
+ /* Create WQ by kernel and query its queue counter ID. */
+ if (cq) {
+ wq = mlx5_glue->create_wq(ctx,
+ &(struct ibv_wq_init_attr){
+ .wq_type = IBV_WQT_RQ,
+ .max_wr = 1,
+ .max_sge = 1,
+ .pd = priv->sh->pd,
+ .cq = cq,
+ });
+ if (wq) {
+ /* Counter is assigned only on RDY state. */
+ int ret = mlx5_glue->modify_wq(wq,
+ &(struct ibv_wq_attr){
+ .attr_mask = IBV_WQ_ATTR_STATE,
+ .wq_state = IBV_WQS_RDY,
+ });
+
+ if (ret == 0)
+ mlx5_devx_cmd_wq_query(wq,
+ &priv->counter_set_id);
+ claim_zero(mlx5_glue->destroy_wq(wq));
+ }
+ claim_zero(mlx5_glue->destroy_cq(cq));
+ }
+ } else {
+ priv->counter_set_id = priv->q_counters->id;
+ }
+ if (priv->counter_set_id == 0)
+ DRV_LOG(INFO, "Part of the port %d statistics will not be "
+ "available.", dev->data->port_id);
+}
+
+/**
+ * Check if representor spawn info match devargs.
+ *
+ * @param spawn
+ * Verbs device parameters (name, port, switch_info) to spawn.
+ * @param eth_da
+ * Device devargs to probe.
+ *
+ * @return
+ * Match result.
+ */
+static bool
+mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
+ struct rte_eth_devargs *eth_da)
+{
+ struct mlx5_switch_info *switch_info = &spawn->info;
+ unsigned int p, f;
+ uint16_t id;
+ uint16_t repr_id = mlx5_representor_id_encode(switch_info,
+ eth_da->type);
+
+ switch (eth_da->type) {
+ case RTE_ETH_REPRESENTOR_SF:
+ if (!(spawn->info.port_name == -1 &&
+ switch_info->name_type ==
+ MLX5_PHYS_PORT_NAME_TYPE_PFHPF) &&
+ switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_PFSF) {
+ rte_errno = EBUSY;
+ return false;
+ }
+ break;
+ case RTE_ETH_REPRESENTOR_VF:
+ /* Allows HPF representor index -1 as exception. */
+ if (!(spawn->info.port_name == -1 &&
+ switch_info->name_type ==
+ MLX5_PHYS_PORT_NAME_TYPE_PFHPF) &&
+ switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_PFVF) {
+ rte_errno = EBUSY;
+ return false;
+ }
+ break;
+ case RTE_ETH_REPRESENTOR_NONE:
+ rte_errno = EBUSY;
+ return false;
+ default:
+ rte_errno = ENOTSUP;
+ DRV_LOG(ERR, "unsupported representor type");
+ return false;
+ }
+ /* Check representor ID: */
+ for (p = 0; p < eth_da->nb_ports; ++p) {
+ if (spawn->pf_bond < 0) {
+ /* For non-LAG mode, allow and ignore pf. */
+ switch_info->pf_num = eth_da->ports[p];
+ repr_id = mlx5_representor_id_encode(switch_info,
+ eth_da->type);
+ }
+ for (f = 0; f < eth_da->nb_representor_ports; ++f) {
+ id = MLX5_REPRESENTOR_ID
+ (eth_da->ports[p], eth_da->type,
+ eth_da->representor_ports[f]);
+ if (repr_id == id)
+ return true;
+ }
+ }
+ rte_errno = EBUSY;
+ return false;
+}
+
+
/**
* Spawn an Ethernet device from Verbs information.
*
* Verbs device parameters (name, port, switch_info) to spawn.
* @param config
* Device configuration parameters.
+ * @param config
+ * Device arguments.
*
* @return
* A valid Ethernet device object on success, NULL otherwise and rte_errno
static struct rte_eth_dev *
mlx5_dev_spawn(struct rte_device *dpdk_dev,
struct mlx5_dev_spawn_data *spawn,
- struct mlx5_dev_config *config)
+ struct mlx5_dev_config *config,
+ struct rte_eth_devargs *eth_da)
{
const struct mlx5_switch_info *switch_info = &spawn->info;
struct mlx5_dev_ctx_shared *sh = NULL;
int err = 0;
unsigned int hw_padding = 0;
unsigned int mps;
- unsigned int cqe_comp;
- unsigned int cqe_pad = 0;
unsigned int tunnel_en = 0;
unsigned int mpls_en = 0;
unsigned int swp = 0;
char name[RTE_ETH_NAME_MAX_LEN];
int own_domain_id = 0;
uint16_t port_id;
- unsigned int i;
-#ifdef HAVE_MLX5DV_DR_DEVX_PORT
- struct mlx5dv_devx_port devx_port = { .comp_mask = 0 };
-#endif
+ struct mlx5_port_info vport_info = { .query_flags = 0 };
+ int i;
/* Determine if this port representor is supposed to be spawned. */
- if (switch_info->representor && dpdk_dev->devargs) {
- struct rte_eth_devargs eth_da;
-
- err = rte_eth_devargs_parse(dpdk_dev->devargs->args, ð_da);
- if (err) {
- rte_errno = -err;
- DRV_LOG(ERR, "failed to process device arguments: %s",
- strerror(rte_errno));
- return NULL;
- }
- for (i = 0; i < eth_da.nb_representor_ports; ++i)
- if (eth_da.representor_ports[i] ==
- (uint16_t)switch_info->port_name)
- break;
- if (i == eth_da.nb_representor_ports) {
- rte_errno = EBUSY;
- return NULL;
- }
- }
+ if (switch_info->representor && dpdk_dev->devargs &&
+ !mlx5_representor_match(spawn, eth_da))
+ return NULL;
/* Build device name. */
- if (spawn->pf_bond < 0) {
+ if (spawn->pf_bond < 0) {
/* Single device. */
if (!switch_info->representor)
strlcpy(name, dpdk_dev->name, sizeof(name));
else
- snprintf(name, sizeof(name), "%s_representor_%u",
- dpdk_dev->name, switch_info->port_name);
+ err = snprintf(name, sizeof(name), "%s_representor_%s%u",
+ dpdk_dev->name,
+ switch_info->name_type ==
+ MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
+ switch_info->port_name);
} else {
/* Bonding device. */
- if (!switch_info->representor)
- snprintf(name, sizeof(name), "%s_%s",
+ if (!switch_info->representor) {
+ err = snprintf(name, sizeof(name), "%s_%s",
dpdk_dev->name,
mlx5_os_get_dev_device_name(spawn->phys_dev));
- else
- snprintf(name, sizeof(name), "%s_%s_representor_%u",
- dpdk_dev->name,
- mlx5_os_get_dev_device_name(spawn->phys_dev),
- switch_info->port_name);
+ } else {
+ err = snprintf(name, sizeof(name), "%s_%s_representor_c%dpf%d%s%u",
+ dpdk_dev->name,
+ mlx5_os_get_dev_device_name(spawn->phys_dev),
+ switch_info->ctrl_num,
+ switch_info->pf_num,
+ switch_info->name_type ==
+ MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
+ switch_info->port_name);
+ }
}
+ if (err >= (int)sizeof(name))
+ DRV_LOG(WARNING, "device name overflow %s", name);
/* check if the device is already spawned */
if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
rte_errno = EEXIST;
rte_errno = ENOMEM;
return NULL;
}
- priv = eth_dev->data->dev_private;
- if (priv->sh->bond_dev != UINT16_MAX)
- /* For bonding port, use primary PCI device. */
- eth_dev->device =
- rte_eth_devices[priv->sh->bond_dev].device;
- else
- eth_dev->device = dpdk_dev;
- eth_dev->dev_ops = &mlx5_os_dev_sec_ops;
+ eth_dev->device = dpdk_dev;
+ eth_dev->dev_ops = &mlx5_dev_sec_ops;
eth_dev->rx_descriptor_status = mlx5_rx_descriptor_status;
eth_dev->tx_descriptor_status = mlx5_tx_descriptor_status;
err = mlx5_proc_priv_init(eth_dev);
mprq_caps.max_single_wqe_log_num_of_strides;
}
#endif
- if (RTE_CACHE_LINE_SIZE == 128 &&
- !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
- cqe_comp = 0;
- else
- cqe_comp = 1;
- config->cqe_comp = cqe_comp;
-#ifdef HAVE_IBV_MLX5_MOD_CQE_128B_PAD
- /* Whether device supports 128B Rx CQE padding. */
- cqe_pad = RTE_CACHE_LINE_SIZE == 128 &&
- (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_PAD);
-#endif
+ /* Rx CQE compression is enabled by default. */
+ config->cqe_comp = 1;
#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
tunnel_en = ((dv_attr.tunnel_offloads_caps &
priv->dev_port = spawn->phys_port;
priv->pci_dev = spawn->pci_dev;
priv->mtu = RTE_ETHER_MTU;
- priv->mp_id.port_id = port_id;
- strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
/* Some internal functions rely on Netlink sockets, open them now. */
priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
priv->vport_meta_tag = 0;
priv->vport_meta_mask = 0;
priv->pf_bond = spawn->pf_bond;
-#ifdef HAVE_MLX5DV_DR_DEVX_PORT
+
+ DRV_LOG(DEBUG,
+ "dev_port=%u bus=%s pci=%s master=%d representor=%d pf_bond=%d\n",
+ priv->dev_port, dpdk_dev->bus->name,
+ priv->pci_dev ? priv->pci_dev->name : "NONE",
+ priv->master, priv->representor, priv->pf_bond);
+
/*
- * The DevX port query API is implemented. E-Switch may use
- * either vport or reg_c[0] metadata register to match on
- * vport index. The engaged part of metadata register is
- * defined by mask.
+ * If we have E-Switch we should determine the vport attributes.
+ * E-Switch may use either source vport field or reg_c[0] metadata
+ * register to match on vport index. The engaged part of metadata
+ * register is defined by mask.
*/
if (switch_info->representor || switch_info->master) {
- devx_port.comp_mask = MLX5DV_DEVX_PORT_VPORT |
- MLX5DV_DEVX_PORT_MATCH_REG_C_0;
- err = mlx5_glue->devx_port_query(sh->ctx, spawn->phys_port,
- &devx_port);
+ err = mlx5_glue->devx_port_query(sh->ctx,
+ spawn->phys_port,
+ &vport_info);
if (err) {
DRV_LOG(WARNING,
"can't query devx port %d on device %s",
spawn->phys_port,
mlx5_os_get_dev_device_name(spawn->phys_dev));
- devx_port.comp_mask = 0;
+ vport_info.query_flags = 0;
}
}
- if (devx_port.comp_mask & MLX5DV_DEVX_PORT_MATCH_REG_C_0) {
- priv->vport_meta_tag = devx_port.reg_c_0.value;
- priv->vport_meta_mask = devx_port.reg_c_0.mask;
+ if (vport_info.query_flags & MLX5_PORT_QUERY_REG_C0) {
+ priv->vport_meta_tag = vport_info.vport_meta_tag;
+ priv->vport_meta_mask = vport_info.vport_meta_mask;
if (!priv->vport_meta_mask) {
DRV_LOG(ERR, "vport zero mask for port %d"
" on bonding device %s",
goto error;
}
}
- if (devx_port.comp_mask & MLX5DV_DEVX_PORT_VPORT) {
- priv->vport_id = devx_port.vport_num;
- } else if (spawn->pf_bond >= 0) {
+ if (vport_info.query_flags & MLX5_PORT_QUERY_VPORT) {
+ priv->vport_id = vport_info.vport_id;
+ } else if (spawn->pf_bond >= 0 &&
+ (switch_info->representor || switch_info->master)) {
DRV_LOG(ERR, "can't deduce vport index for port %d"
" on bonding device %s",
spawn->phys_port,
err = ENOTSUP;
goto error;
} else {
- /* Suppose vport index in compatible way. */
+ /*
+ * Suppose vport index in compatible way. Kernel/rdma_core
+ * support single E-Switch per PF configurations only and
+ * vport_id field contains the vport index for associated VF,
+ * which is deduced from representor port name.
+ * For example, let's have the IB device port 10, it has
+ * attached network device eth0, which has port name attribute
+ * pf0vf2, we can deduce the VF number as 2, and set vport index
+ * as 3 (2+1). This assigning schema should be changed if the
+ * multiple E-Switch instances per PF configurations or/and PCI
+ * subfunctions are added.
+ */
priv->vport_id = switch_info->representor ?
switch_info->port_name + 1 : -1;
}
-#else
- /*
- * Kernel/rdma_core support single E-Switch per PF configurations
- * only and vport_id field contains the vport index for
- * associated VF, which is deduced from representor port name.
- * For example, let's have the IB device port 10, it has
- * attached network device eth0, which has port name attribute
- * pf0vf2, we can deduce the VF number as 2, and set vport index
- * as 3 (2+1). This assigning schema should be changed if the
- * multiple E-Switch instances per PF configurations or/and PCI
- * subfunctions are added.
- */
- priv->vport_id = switch_info->representor ?
- switch_info->port_name + 1 : -1;
-#endif
- /* representor_id field keeps the unmodified VF index. */
- priv->representor_id = switch_info->representor ?
- switch_info->port_name : -1;
+ priv->representor_id = mlx5_representor_id_encode(switch_info,
+ eth_da->type);
/*
* Look for sibling devices in order to reuse their switch domain
* if any, otherwise allocate one.
*/
- MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+ MLX5_ETH_FOREACH_DEV(port_id, dpdk_dev) {
const struct mlx5_priv *opriv =
rte_eth_devices[port_id].data->dev_private;
RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
continue;
priv->domain_id = opriv->domain_id;
+ DRV_LOG(DEBUG, "dev_port-%u inherit domain_id=%u\n",
+ priv->dev_port, priv->domain_id);
break;
}
if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
goto error;
}
own_domain_id = 1;
+ DRV_LOG(DEBUG, "dev_port-%u new domain_id=%u\n",
+ priv->dev_port, priv->domain_id);
}
/* Override some values set by hardware configuration. */
mlx5_args(config, dpdk_dev->devargs);
- err = mlx5_dev_check_sibling_config(priv, config);
+ err = mlx5_dev_check_sibling_config(priv, config, dpdk_dev);
if (err)
goto error;
config->hw_csum = !!(sh->device_attr.device_cap_flags_ex &
config->dv_flow_en = 0;
}
#endif
+ if (spawn->max_port > UINT8_MAX) {
+ /* Verbs can't support ports larger than 255 by design. */
+ DRV_LOG(ERR, "can't support IB ports > UINT8_MAX");
+ err = EINVAL;
+ goto error;
+ }
config->ind_table_max_size =
sh->device_attr.max_rwq_indirection_table_size;
/*
config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
config->mps == MLX5_MPW ? "legacy " : "",
config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
- if (config->cqe_comp && !cqe_comp) {
- DRV_LOG(WARNING, "Rx CQE compression isn't supported");
- config->cqe_comp = 0;
- }
- if (config->cqe_pad && !cqe_pad) {
- DRV_LOG(WARNING, "Rx CQE padding isn't supported");
- config->cqe_pad = 0;
- } else if (config->cqe_pad) {
- DRV_LOG(INFO, "Rx CQE padding is enabled");
- }
if (config->devx) {
err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config->hca_attr);
if (err) {
err = -err;
goto error;
}
-#ifdef HAVE_MLX5DV_DR_ACTION_FLOW_HIT
- if (config->hca_attr.flow_hit_aso) {
- sh->flow_hit_aso_en = 1;
- err = mlx5_flow_aso_age_mng_init(sh);
- if (err) {
- err = -err;
- goto error;
- }
- DRV_LOG(DEBUG, "Flow Hit ASO is supported.");
- }
-#endif /* HAVE_MLX5DV_DR_ACTION_FLOW_HIT */
/* Check relax ordering support. */
if (!haswell_broadwell_cpu) {
sh->cmng.relaxed_ordering_write =
sh->cmng.relaxed_ordering_read = 0;
sh->cmng.relaxed_ordering_write = 0;
}
+ sh->rq_ts_format = config->hca_attr.rq_ts_format;
+ sh->sq_ts_format = config->hca_attr.sq_ts_format;
+ sh->steering_format_version =
+ config->hca_attr.steering_format_version;
+ sh->qp_ts_format = config->hca_attr.qp_ts_format;
/* Check for LRO support. */
if (config->dest_tir && config->hca_attr.lro_cap &&
config->dv_flow_en) {
"required for coalescing is %d bytes",
config->hca_attr.lro_min_mss_size);
}
-#if defined(HAVE_MLX5DV_DR) && defined(HAVE_MLX5_DR_CREATE_ACTION_FLOW_METER)
+#if defined(HAVE_MLX5DV_DR) && \
+ (defined(HAVE_MLX5_DR_CREATE_ACTION_FLOW_METER) || \
+ defined(HAVE_MLX5_DR_CREATE_ACTION_ASO))
if (config->hca_attr.qos.sup &&
- config->hca_attr.qos.srtcm_sup &&
+ config->hca_attr.qos.flow_meter_old &&
config->dv_flow_en) {
uint8_t reg_c_mask =
config->hca_attr.qos.flow_meter_reg_c_ids;
DRV_LOG(WARNING, "No available register for"
" meter.");
} else {
- priv->mtr_color_reg = ffs(reg_c_mask) - 1 +
- REG_C_0;
+ /*
+ * The meter color register is used by the
+ * flow-hit feature as well.
+ * The flow-hit feature must use REG_C_3
+ * Prefer REG_C_3 if it is available.
+ */
+ if (reg_c_mask & (1 << (REG_C_3 - REG_C_0)))
+ priv->mtr_color_reg = REG_C_3;
+ else
+ priv->mtr_color_reg = ffs(reg_c_mask)
+ - 1 + REG_C_0;
priv->mtr_en = 1;
priv->mtr_reg_share =
- config->hca_attr.qos.flow_meter_reg_share;
+ config->hca_attr.qos.flow_meter;
DRV_LOG(DEBUG, "The REG_C meter uses is %d",
priv->mtr_color_reg);
}
}
+ if (config->hca_attr.qos.sup &&
+ config->hca_attr.qos.flow_meter_aso_sup) {
+ uint32_t log_obj_size =
+ rte_log2_u32(MLX5_ASO_MTRS_PER_POOL >> 1);
+ if (log_obj_size >=
+ config->hca_attr.qos.log_meter_aso_granularity &&
+ log_obj_size <=
+ config->hca_attr.qos.log_meter_aso_max_alloc)
+ sh->meter_aso_en = 1;
+ }
+ if (priv->mtr_en) {
+ err = mlx5_aso_flow_mtrs_mng_init(priv->sh);
+ if (err) {
+ err = -err;
+ goto error;
+ }
+ }
+ if (config->hca_attr.flow.tunnel_header_0_1)
+ sh->tunnel_header_0_1 = 1;
#endif
+#ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
+ if (config->hca_attr.flow_hit_aso &&
+ priv->mtr_color_reg == REG_C_3) {
+ sh->flow_hit_aso_en = 1;
+ err = mlx5_flow_aso_age_mng_init(sh);
+ if (err) {
+ err = -err;
+ goto error;
+ }
+ DRV_LOG(DEBUG, "Flow Hit ASO is supported.");
+ }
+#endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
+#if defined(HAVE_MLX5_DR_CREATE_ACTION_ASO) && \
+ defined(HAVE_MLX5_DR_ACTION_ASO_CT)
+ if (config->hca_attr.ct_offload &&
+ priv->mtr_color_reg == REG_C_3) {
+ err = mlx5_flow_aso_ct_mng_init(sh);
+ if (err) {
+ err = -err;
+ goto error;
+ }
+ DRV_LOG(DEBUG, "CT ASO is supported.");
+ sh->ct_aso_en = 1;
+ }
+#endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO && HAVE_MLX5_DR_ACTION_ASO_CT */
#if defined(HAVE_MLX5DV_DR) && defined(HAVE_MLX5_DR_CREATE_ACTION_FLOW_SAMPLE)
if (config->hca_attr.log_max_ft_sampler_num > 0 &&
config->dv_flow_en) {
priv->sampler_en = 1;
- DRV_LOG(DEBUG, "The Sampler enabled!\n");
+ DRV_LOG(DEBUG, "Sampler enabled!");
} else {
priv->sampler_en = 0;
if (!config->hca_attr.log_max_ft_sampler_num)
- DRV_LOG(WARNING, "No available register for"
- " Sampler.");
+ DRV_LOG(WARNING,
+ "No available register for sampler.");
else
- DRV_LOG(DEBUG, "DV flow is not supported!\n");
+ DRV_LOG(DEBUG, "DV flow is not supported!");
}
#endif
}
+ if (config->cqe_comp && RTE_CACHE_LINE_SIZE == 128 &&
+ !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP)) {
+ DRV_LOG(WARNING, "Rx CQE 128B compression is not supported");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_FTAG_STRIDX &&
+ (!config->devx || !config->hca_attr.mini_cqe_resp_flow_tag)) {
+ DRV_LOG(WARNING, "Flow Tag CQE compression"
+ " format isn't supported.");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_L34H_STRIDX &&
+ (!config->devx || !config->hca_attr.mini_cqe_resp_l3_l4_tag)) {
+ DRV_LOG(WARNING, "L3/L4 Header CQE compression"
+ " format isn't supported.");
+ config->cqe_comp = 0;
+ }
+ DRV_LOG(DEBUG, "Rx CQE compression is %ssupported",
+ config->cqe_comp ? "" : "not ");
if (config->tx_pp) {
DRV_LOG(DEBUG, "Timestamp counter frequency %u kHz",
config->hca_attr.dev_freq_khz);
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
eth_dev->data->representor_id = priv->representor_id;
}
+ priv->mp_id.port_id = eth_dev->data->port_id;
+ strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
/*
* Store associated network device interface index. This index
* is permanent throughout the lifetime of device. So, we may store
*/
MLX5_ASSERT(spawn->ifindex);
priv->if_index = spawn->ifindex;
- if (priv->pf_bond >= 0 && priv->master) {
- /* Get bond interface info */
- err = mlx5_sysfs_bond_info(priv->if_index,
- &priv->bond_ifindex,
- priv->bond_name);
- if (err)
- DRV_LOG(ERR, "unable to get bond info: %s",
- strerror(rte_errno));
- else
- DRV_LOG(INFO, "PF device %u, bond device %u(%s)",
- priv->if_index, priv->bond_ifindex,
- priv->bond_name);
- }
eth_dev->data->dev_private = priv;
priv->dev_data = eth_dev->data;
eth_dev->data->mac_addrs = priv->mac;
- if (spawn->pf_bond < 0) {
- eth_dev->device = dpdk_dev;
- } else {
- /* Use primary bond PCI as device. */
- if (sh->bond_dev == UINT16_MAX) {
- sh->bond_dev = eth_dev->data->port_id;
- eth_dev->device = dpdk_dev;
- } else {
- eth_dev->device = rte_eth_devices[sh->bond_dev].device;
- }
- }
+ eth_dev->device = dpdk_dev;
eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
/* Configure the first MAC address by default. */
if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
goto error;
}
DRV_LOG(INFO,
- "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
- eth_dev->data->port_id,
- mac.addr_bytes[0], mac.addr_bytes[1],
- mac.addr_bytes[2], mac.addr_bytes[3],
- mac.addr_bytes[4], mac.addr_bytes[5]);
+ "port %u MAC address is " RTE_ETHER_ADDR_PRT_FMT,
+ eth_dev->data->port_id, RTE_ETHER_ADDR_BYTES(&mac));
#ifdef RTE_LIBRTE_MLX5_DEBUG
{
- char ifname[IF_NAMESIZE];
+ char ifname[MLX5_NAMESIZE];
if (mlx5_get_ifname(eth_dev, &ifname) == 0)
DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
/* Initialize burst functions to prevent crashes before link-up. */
eth_dev->rx_pkt_burst = removed_rx_burst;
eth_dev->tx_pkt_burst = removed_tx_burst;
- eth_dev->dev_ops = &mlx5_os_dev_ops;
+ eth_dev->dev_ops = &mlx5_dev_ops;
eth_dev->rx_descriptor_status = mlx5_rx_descriptor_status;
eth_dev->tx_descriptor_status = mlx5_tx_descriptor_status;
eth_dev->rx_queue_count = mlx5_rx_queue_count;
mlx5_ifindex(eth_dev),
eth_dev->data->mac_addrs,
MLX5_MAX_MAC_ADDRESSES);
- priv->flows = 0;
priv->ctrl_flows = 0;
rte_spinlock_init(&priv->flow_list_lock);
TAILQ_INIT(&priv->flow_meters);
- TAILQ_INIT(&priv->flow_meter_profiles);
+ priv->mtr_profile_tbl = mlx5_l3t_create(MLX5_L3T_TYPE_PTR);
+ if (!priv->mtr_profile_tbl)
+ goto error;
/* Hint libmlx5 to use PMD allocator for data plane resources */
mlx5_glue->dv_set_context_attr(sh->ctx,
MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
(void *)((uintptr_t)&(struct mlx5dv_ctx_allocators){
.alloc = &mlx5_alloc_verbs_buf,
.free = &mlx5_free_verbs_buf,
- .data = priv,
+ .data = sh,
}));
/* Bring Ethernet device up. */
DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
mlx5_set_min_inline(spawn, config);
/* Store device configuration on private structure. */
priv->config = *config;
+ for (i = 0; i < MLX5_FLOW_TYPE_MAXI; i++) {
+ icfg[i].release_mem_en = !!config->reclaim_mode;
+ if (config->reclaim_mode)
+ icfg[i].per_core_cache = 0;
+ priv->flows[i] = mlx5_ipool_create(&icfg[i]);
+ if (!priv->flows[i])
+ goto error;
+ }
/* Create context for virtual machine VLAN workaround. */
priv->vmwa_context = mlx5_vlan_vmwa_init(eth_dev, spawn->ifindex);
if (config->dv_flow_en) {
/* Use specific wrappers for Tx object. */
priv->obj_ops.txq_obj_new = mlx5_os_txq_obj_new;
priv->obj_ops.txq_obj_release = mlx5_os_txq_obj_release;
-
+ mlx5_queue_counter_id_prepare(eth_dev);
+ priv->obj_ops.lb_dummy_queue_create =
+ mlx5_rxq_ibv_obj_dummy_lb_create;
+ priv->obj_ops.lb_dummy_queue_release =
+ mlx5_rxq_ibv_obj_dummy_lb_release;
} else {
priv->obj_ops = ibv_obj_ops;
}
+ if (config->tx_pp &&
+ (priv->config.dv_esw_en ||
+ priv->obj_ops.txq_obj_new != mlx5_os_txq_obj_new)) {
+ /*
+ * HAVE_MLX5DV_DEVX_UAR_OFFSET is required to support
+ * packet pacing and already checked above.
+ * Hence, we should only make sure the SQs will be created
+ * with DevX, not with Verbs.
+ * Verbs allocates the SQ UAR on its own and it can't be shared
+ * with Clock Queue UAR as required for Tx scheduling.
+ */
+ DRV_LOG(ERR, "Verbs SQs, UAR can't be shared as required for packet pacing");
+ err = ENODEV;
+ goto error;
+ }
priv->drop_queue.hrxq = mlx5_drop_action_create(eth_dev);
if (!priv->drop_queue.hrxq)
goto error;
err = ENOTSUP;
goto error;
}
- mlx5_cache_list_init(&priv->hrxqs, "hrxq", 0, eth_dev,
- mlx5_hrxq_create_cb,
- mlx5_hrxq_match_cb,
- mlx5_hrxq_remove_cb);
+ priv->hrxqs = mlx5_list_create("hrxq", eth_dev, true,
+ mlx5_hrxq_create_cb,
+ mlx5_hrxq_match_cb,
+ mlx5_hrxq_remove_cb,
+ mlx5_hrxq_clone_cb,
+ mlx5_hrxq_clone_free_cb);
+ if (!priv->hrxqs)
+ goto error;
+ rte_rwlock_init(&priv->ind_tbls_lock);
/* Query availability of metadata reg_c's. */
err = mlx5_flow_discover_mreg_c(eth_dev);
if (err < 0) {
priv->sh->dv_regc0_mask) {
priv->mreg_cp_tbl = mlx5_hlist_create(MLX5_FLOW_MREG_HNAME,
MLX5_FLOW_MREG_HTABLE_SZ,
- 0, 0,
+ false, true, eth_dev,
flow_dv_mreg_create_cb,
- NULL,
- flow_dv_mreg_remove_cb);
+ flow_dv_mreg_match_cb,
+ flow_dv_mreg_remove_cb,
+ flow_dv_mreg_clone_cb,
+ flow_dv_mreg_clone_free_cb);
if (!priv->mreg_cp_tbl) {
err = ENOMEM;
goto error;
}
- priv->mreg_cp_tbl->ctx = eth_dev;
}
rte_spinlock_init(&priv->shared_act_sl);
mlx5_flow_counter_mode_config(eth_dev);
+ mlx5_flow_drop_action_config(eth_dev);
if (priv->config.dv_flow_en)
eth_dev->data->dev_flags |= RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE;
return eth_dev;
mlx5_vlan_vmwa_exit(priv->vmwa_context);
if (eth_dev && priv->drop_queue.hrxq)
mlx5_drop_action_destroy(eth_dev);
+ if (priv->mtr_profile_tbl)
+ mlx5_l3t_destroy(priv->mtr_profile_tbl);
if (own_domain_id)
claim_zero(rte_eth_switch_domain_free(priv->domain_id));
- mlx5_cache_list_destroy(&priv->hrxqs);
+ if (priv->hrxqs)
+ mlx5_list_destroy(priv->hrxqs);
mlx5_free(priv);
if (eth_dev != NULL)
eth_dev->data->dev_private = NULL;
* @param[in] ibv_dev
* Pointer to Infiniband device structure.
* @param[in] pci_dev
- * Pointer to PCI device structure to match PCI address.
+ * Pointer to primary PCI address structure to match.
* @param[in] nl_rdma
* Netlink RDMA group socket handle.
+ * @param[in] owner
+ * Rerepsentor owner PF index.
+ * @param[out] bond_info
+ * Pointer to bonding information.
*
* @return
* negative value if no bonding device found, otherwise
*/
static int
mlx5_device_bond_pci_match(const struct ibv_device *ibv_dev,
- const struct rte_pci_device *pci_dev,
- int nl_rdma)
+ const struct rte_pci_addr *pci_dev,
+ int nl_rdma, uint16_t owner,
+ struct mlx5_bond_info *bond_info)
{
char ifname[IF_NAMESIZE + 1];
unsigned int ifindex;
unsigned int np, i;
- FILE *file = NULL;
+ FILE *bond_file = NULL, *file;
int pf = -1;
+ int ret;
/*
* Try to get master device name. If something goes
* wrong suppose the lack of kernel support and no
* bonding devices.
*/
+ memset(bond_info, 0, sizeof(*bond_info));
if (nl_rdma < 0)
return -1;
if (!strstr(ibv_dev->name, "bond"))
/* Try to read bonding slave names from sysfs. */
MKSTR(slaves,
"/sys/class/net/%s/master/bonding/slaves", ifname);
- file = fopen(slaves, "r");
- if (file)
+ bond_file = fopen(slaves, "r");
+ if (bond_file)
break;
}
- if (!file)
+ if (!bond_file)
return -1;
/* Use safe format to check maximal buffer length. */
MLX5_ASSERT(atol(RTE_STR(IF_NAMESIZE)) == IF_NAMESIZE);
- while (fscanf(file, "%" RTE_STR(IF_NAMESIZE) "s", ifname) == 1) {
+ while (fscanf(bond_file, "%" RTE_STR(IF_NAMESIZE) "s", ifname) == 1) {
char tmp_str[IF_NAMESIZE + 32];
struct rte_pci_addr pci_addr;
struct mlx5_switch_info info;
/* Process slave interface names in the loop. */
snprintf(tmp_str, sizeof(tmp_str),
"/sys/class/net/%s", ifname);
- if (mlx5_dev_to_pci_addr(tmp_str, &pci_addr)) {
+ if (mlx5_get_pci_addr(tmp_str, &pci_addr)) {
DRV_LOG(WARNING, "can not get PCI address"
" for netdev \"%s\"", ifname);
continue;
}
- if (pci_dev->addr.domain != pci_addr.domain ||
- pci_dev->addr.bus != pci_addr.bus ||
- pci_dev->addr.devid != pci_addr.devid ||
- pci_dev->addr.function != pci_addr.function)
- continue;
/* Slave interface PCI address match found. */
- fclose(file);
snprintf(tmp_str, sizeof(tmp_str),
"/sys/class/net/%s/phys_port_name", ifname);
file = fopen(tmp_str, "rb");
info.name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET;
if (fscanf(file, "%32s", tmp_str) == 1)
mlx5_translate_port_name(tmp_str, &info);
- if (info.name_type == MLX5_PHYS_PORT_NAME_TYPE_LEGACY ||
- info.name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK)
+ fclose(file);
+ /* Only process PF ports. */
+ if (info.name_type != MLX5_PHYS_PORT_NAME_TYPE_LEGACY &&
+ info.name_type != MLX5_PHYS_PORT_NAME_TYPE_UPLINK)
+ continue;
+ /* Check max bonding member. */
+ if (info.port_name >= MLX5_BOND_MAX_PORTS) {
+ DRV_LOG(WARNING, "bonding index out of range, "
+ "please increase MLX5_BOND_MAX_PORTS: %s",
+ tmp_str);
+ break;
+ }
+ /* Match PCI address, allows BDF0+pfx or BDFx+pfx. */
+ if (pci_dev->domain == pci_addr.domain &&
+ pci_dev->bus == pci_addr.bus &&
+ pci_dev->devid == pci_addr.devid &&
+ ((pci_dev->function == 0 &&
+ pci_dev->function + owner == pci_addr.function) ||
+ (pci_dev->function == owner &&
+ pci_addr.function == owner)))
pf = info.port_name;
- break;
- }
- if (file)
+ /* Get ifindex. */
+ snprintf(tmp_str, sizeof(tmp_str),
+ "/sys/class/net/%s/ifindex", ifname);
+ file = fopen(tmp_str, "rb");
+ if (!file)
+ break;
+ ret = fscanf(file, "%u", &ifindex);
fclose(file);
+ if (ret != 1)
+ break;
+ /* Save bonding info. */
+ strncpy(bond_info->ports[info.port_name].ifname, ifname,
+ sizeof(bond_info->ports[0].ifname));
+ bond_info->ports[info.port_name].pci_addr = pci_addr;
+ bond_info->ports[info.port_name].ifindex = ifindex;
+ bond_info->n_port++;
+ }
+ if (pf >= 0) {
+ /* Get bond interface info */
+ ret = mlx5_sysfs_bond_info(ifindex, &bond_info->ifindex,
+ bond_info->ifname);
+ if (ret)
+ DRV_LOG(ERR, "unable to get bond info: %s",
+ strerror(rte_errno));
+ else
+ DRV_LOG(INFO, "PF device %u, bond device %u(%s)",
+ ifindex, bond_info->ifindex, bond_info->ifname);
+ }
return pf;
}
+static void
+mlx5_os_config_default(struct mlx5_dev_config *config)
+{
+ memset(config, 0, sizeof(*config));
+ config->mps = MLX5_ARG_UNSET;
+ config->dbnc = MLX5_ARG_UNSET;
+ config->rx_vec_en = 1;
+ config->txq_inline_max = MLX5_ARG_UNSET;
+ config->txq_inline_min = MLX5_ARG_UNSET;
+ config->txq_inline_mpw = MLX5_ARG_UNSET;
+ config->txqs_inline = MLX5_ARG_UNSET;
+ config->vf_nl_en = 1;
+ config->mr_ext_memseg_en = 1;
+ config->mprq.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN;
+ config->mprq.min_rxqs_num = MLX5_MPRQ_MIN_RXQS;
+ config->dv_esw_en = 1;
+ config->dv_flow_en = 1;
+ config->decap_en = 1;
+ config->log_hp_size = MLX5_ARG_UNSET;
+}
+
/**
- * DPDK callback to register a PCI device.
+ * Register a PCI device within bonding.
*
- * This function spawns Ethernet devices out of a given PCI device.
+ * This function spawns Ethernet devices out of a given PCI device and
+ * bonding owner PF index.
*
- * @param[in] pci_drv
- * PCI driver structure (mlx5_driver).
* @param[in] pci_dev
* PCI device information.
+ * @param[in] req_eth_da
+ * Requested ethdev device argument.
+ * @param[in] owner_id
+ * Requested owner PF port ID within bonding device, default to 0.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-int
-mlx5_os_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
- struct rte_pci_device *pci_dev)
+static int
+mlx5_os_pci_probe_pf(struct rte_pci_device *pci_dev,
+ struct rte_eth_devargs *req_eth_da,
+ uint16_t owner_id)
{
struct ibv_device **ibv_list;
/*
struct mlx5_dev_spawn_data *list = NULL;
struct mlx5_dev_config dev_config;
unsigned int dev_config_vf;
- int ret;
+ struct rte_eth_devargs eth_da = *req_eth_da;
+ struct rte_pci_addr owner_pci = pci_dev->addr; /* Owner PF. */
+ struct mlx5_bond_info bond_info;
+ int ret = -1;
- if (rte_eal_process_type() == RTE_PROC_PRIMARY)
- mlx5_pmd_socket_init();
- ret = mlx5_init_once();
- if (ret) {
- DRV_LOG(ERR, "unable to init PMD global data: %s",
- strerror(rte_errno));
- return -rte_errno;
- }
errno = 0;
ibv_list = mlx5_glue->get_device_list(&ret);
if (!ibv_list) {
DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name);
bd = mlx5_device_bond_pci_match
- (ibv_list[ret], pci_dev, nl_rdma);
+ (ibv_list[ret], &owner_pci, nl_rdma, owner_id,
+ &bond_info);
if (bd >= 0) {
/*
* Bonding device detected. Only one match is allowed,
ret = -rte_errno;
goto exit;
}
+ /* Amend owner pci address if owner PF ID specified. */
+ if (eth_da.nb_representor_ports)
+ owner_pci.function += owner_id;
DRV_LOG(INFO, "PCI information matches for"
" slave %d bonding device \"%s\"",
bd, ibv_list[ret]->name);
ibv_match[nd++] = ibv_list[ret];
break;
+ } else {
+ /* Bonding device not found. */
+ if (mlx5_get_pci_addr(ibv_list[ret]->ibdev_path,
+ &pci_addr))
+ continue;
+ if (owner_pci.domain != pci_addr.domain ||
+ owner_pci.bus != pci_addr.bus ||
+ owner_pci.devid != pci_addr.devid ||
+ owner_pci.function != pci_addr.function)
+ continue;
+ DRV_LOG(INFO, "PCI information matches for device \"%s\"",
+ ibv_list[ret]->name);
+ ibv_match[nd++] = ibv_list[ret];
}
- if (mlx5_dev_to_pci_addr
- (ibv_list[ret]->ibdev_path, &pci_addr))
- continue;
- if (pci_dev->addr.domain != pci_addr.domain ||
- pci_dev->addr.bus != pci_addr.bus ||
- pci_dev->addr.devid != pci_addr.devid ||
- pci_dev->addr.function != pci_addr.function)
- continue;
- DRV_LOG(INFO, "PCI information matches for device \"%s\"",
- ibv_list[ret]->name);
- ibv_match[nd++] = ibv_list[ret];
}
ibv_match[nd] = NULL;
if (!nd) {
DRV_LOG(WARNING,
"no Verbs device matches PCI device " PCI_PRI_FMT ","
" are kernel drivers loaded?",
- pci_dev->addr.domain, pci_dev->addr.bus,
- pci_dev->addr.devid, pci_dev->addr.function);
+ owner_pci.domain, owner_pci.bus,
+ owner_pci.devid, owner_pci.function);
rte_errno = ENOENT;
ret = -rte_errno;
goto exit;
goto exit;
}
}
-#ifndef HAVE_MLX5DV_DR_DEVX_PORT
- if (bd >= 0) {
- /*
- * This may happen if there is VF LAG kernel support and
- * application is compiled with older rdma_core library.
- */
- DRV_LOG(ERR,
- "No kernel/verbs support for VF LAG bonding found.");
- rte_errno = ENOTSUP;
- ret = -rte_errno;
- goto exit;
- }
-#endif
/*
* Now we can determine the maximal
* amount of devices to be spawned.
MLX5_ASSERT(nd == 1);
MLX5_ASSERT(np);
for (i = 1; i <= np; ++i) {
+ list[ns].bond_info = &bond_info;
list[ns].max_port = np;
list[ns].phys_port = i;
list[ns].phys_dev = ibv_match[0];
(list[ns].ifindex,
&list[ns].info);
}
-#ifdef HAVE_MLX5DV_DR_DEVX_PORT
if (!ret && bd >= 0) {
switch (list[ns].info.name_type) {
case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
+ if (np == 1) {
+ /*
+ * Force standalone bonding
+ * device for ROCE LAG
+ * confgiurations.
+ */
+ list[ns].info.master = 0;
+ list[ns].info.representor = 0;
+ }
if (list[ns].info.port_name == bd)
ns++;
break;
case MLX5_PHYS_PORT_NAME_TYPE_PFHPF:
/* Fallthrough */
case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
+ /* Fallthrough */
+ case MLX5_PHYS_PORT_NAME_TYPE_PFSF:
if (list[ns].info.pf_num == bd)
ns++;
break;
}
continue;
}
-#endif
if (!ret && (list[ns].info.representor ^
list[ns].info.master))
ns++;
*/
for (i = 0; i != nd; ++i) {
memset(&list[ns].info, 0, sizeof(list[ns].info));
+ list[ns].bond_info = NULL;
list[ns].max_port = 1;
list[ns].phys_port = 1;
list[ns].phys_dev = ibv_match[i];
ret = -rte_errno;
goto exit;
}
+ /*
+ * New kernels may add the switch_id attribute for the case
+ * there is no E-Switch and we wrongly recognized the
+ * only device as master. Override this if there is the
+ * single device with single port and new device name
+ * format present.
+ */
+ if (nd == 1 &&
+ list[0].info.name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK) {
+ list[0].info.master = 0;
+ list[0].info.representor = 0;
+ }
}
MLX5_ASSERT(ns);
/*
case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX6VF:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTXVF:
dev_config_vf = 1;
break;
default:
dev_config_vf = 0;
break;
}
+ if (eth_da.type != RTE_ETH_REPRESENTOR_NONE) {
+ /* Set devargs default values. */
+ if (eth_da.nb_mh_controllers == 0) {
+ eth_da.nb_mh_controllers = 1;
+ eth_da.mh_controllers[0] = 0;
+ }
+ if (eth_da.nb_ports == 0 && ns > 0) {
+ if (list[0].pf_bond >= 0 && list[0].info.representor)
+ DRV_LOG(WARNING, "Representor on Bonding device should use pf#vf# syntax: %s",
+ pci_dev->device.devargs->args);
+ eth_da.nb_ports = 1;
+ eth_da.ports[0] = list[0].info.pf_num;
+ }
+ if (eth_da.nb_representor_ports == 0) {
+ eth_da.nb_representor_ports = 1;
+ eth_da.representor_ports[0] = 0;
+ }
+ }
for (i = 0; i != ns; ++i) {
uint32_t restore;
/* Default configuration. */
- memset(&dev_config, 0, sizeof(struct mlx5_dev_config));
+ mlx5_os_config_default(&dev_config);
dev_config.vf = dev_config_vf;
- dev_config.mps = MLX5_ARG_UNSET;
- dev_config.dbnc = MLX5_ARG_UNSET;
- dev_config.rx_vec_en = 1;
- dev_config.txq_inline_max = MLX5_ARG_UNSET;
- dev_config.txq_inline_min = MLX5_ARG_UNSET;
- dev_config.txq_inline_mpw = MLX5_ARG_UNSET;
- dev_config.txqs_inline = MLX5_ARG_UNSET;
- dev_config.vf_nl_en = 1;
- dev_config.mr_ext_memseg_en = 1;
- dev_config.mprq.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN;
- dev_config.mprq.min_rxqs_num = MLX5_MPRQ_MIN_RXQS;
- dev_config.dv_esw_en = 1;
- dev_config.dv_flow_en = 1;
- dev_config.decap_en = 1;
- dev_config.log_hp_size = MLX5_ARG_UNSET;
+ dev_config.allow_duplicate_pattern = 1;
+ list[i].numa_node = pci_dev->device.numa_node;
list[i].eth_dev = mlx5_dev_spawn(&pci_dev->device,
&list[i],
- &dev_config);
+ &dev_config,
+ ð_da);
if (!list[i].eth_dev) {
if (rte_errno != EBUSY && rte_errno != EEXIST)
break;
}
restore = list[i].eth_dev->data->dev_flags;
rte_eth_copy_pci_info(list[i].eth_dev, pci_dev);
+ /**
+ * Each representor has a dedicated interrupts vector.
+ * rte_eth_copy_pci_info() assigns PF interrupts handle to
+ * representor eth_dev object because representor and PF
+ * share the same PCI address.
+ * Override representor device with a dedicated
+ * interrupts handle here.
+ * Representor interrupts handle is released in mlx5_dev_stop().
+ */
+ if (list[i].info.representor) {
+ struct rte_intr_handle *intr_handle;
+ intr_handle = mlx5_malloc(MLX5_MEM_SYS | MLX5_MEM_ZERO,
+ sizeof(*intr_handle), 0,
+ SOCKET_ID_ANY);
+ if (!intr_handle) {
+ DRV_LOG(ERR,
+ "port %u failed to allocate memory for interrupt handler "
+ "Rx interrupts will not be supported",
+ i);
+ rte_errno = ENOMEM;
+ ret = -rte_errno;
+ goto exit;
+ }
+ list[i].eth_dev->intr_handle = intr_handle;
+ }
/* Restore non-PCI flags cleared by the above call. */
list[i].eth_dev->data->dev_flags |= restore;
rte_eth_dev_probing_finish(list[i].eth_dev);
DRV_LOG(ERR,
"probe of PCI device " PCI_PRI_FMT " aborted after"
" encountering an error: %s",
- pci_dev->addr.domain, pci_dev->addr.bus,
- pci_dev->addr.devid, pci_dev->addr.function,
+ owner_pci.domain, owner_pci.bus,
+ owner_pci.devid, owner_pci.function,
strerror(rte_errno));
ret = -rte_errno;
/* Roll back. */
return ret;
}
+static int
+mlx5_os_parse_eth_devargs(struct rte_device *dev,
+ struct rte_eth_devargs *eth_da)
+{
+ int ret = 0;
+
+ if (dev->devargs == NULL)
+ return 0;
+ memset(eth_da, 0, sizeof(*eth_da));
+ /* Parse representor information first from class argument. */
+ if (dev->devargs->cls_str)
+ ret = rte_eth_devargs_parse(dev->devargs->cls_str, eth_da);
+ if (ret != 0) {
+ DRV_LOG(ERR, "failed to parse device arguments: %s",
+ dev->devargs->cls_str);
+ return -rte_errno;
+ }
+ if (eth_da->type == RTE_ETH_REPRESENTOR_NONE) {
+ /* Parse legacy device argument */
+ ret = rte_eth_devargs_parse(dev->devargs->args, eth_da);
+ if (ret) {
+ DRV_LOG(ERR, "failed to parse device arguments: %s",
+ dev->devargs->args);
+ return -rte_errno;
+ }
+ }
+ return 0;
+}
+
+/**
+ * Callback to register a PCI device.
+ *
+ * This function spawns Ethernet devices out of a given PCI device.
+ *
+ * @param[in] pci_dev
+ * PCI device information.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_os_pci_probe(struct rte_pci_device *pci_dev)
+{
+ struct rte_eth_devargs eth_da = { .nb_ports = 0 };
+ int ret = 0;
+ uint16_t p;
+
+ ret = mlx5_os_parse_eth_devargs(&pci_dev->device, ð_da);
+ if (ret != 0)
+ return ret;
+
+ if (eth_da.nb_ports > 0) {
+ /* Iterate all port if devargs pf is range: "pf[0-1]vf[...]". */
+ for (p = 0; p < eth_da.nb_ports; p++) {
+ ret = mlx5_os_pci_probe_pf(pci_dev, ð_da,
+ eth_da.ports[p]);
+ if (ret)
+ break;
+ }
+ if (ret) {
+ DRV_LOG(ERR, "Probe of PCI device " PCI_PRI_FMT " "
+ "aborted due to proding failure of PF %u",
+ pci_dev->addr.domain, pci_dev->addr.bus,
+ pci_dev->addr.devid, pci_dev->addr.function,
+ eth_da.ports[p]);
+ mlx5_net_remove(&pci_dev->device);
+ }
+ } else {
+ ret = mlx5_os_pci_probe_pf(pci_dev, ð_da, 0);
+ }
+ return ret;
+}
+
+/* Probe a single SF device on auxiliary bus, no representor support. */
+static int
+mlx5_os_auxiliary_probe(struct rte_device *dev)
+{
+ struct rte_eth_devargs eth_da = { .nb_ports = 0 };
+ struct mlx5_dev_config config;
+ struct mlx5_dev_spawn_data spawn = { .pf_bond = -1 };
+ struct rte_auxiliary_device *adev = RTE_DEV_TO_AUXILIARY(dev);
+ struct rte_eth_dev *eth_dev;
+ int ret = 0;
+
+ /* Parse ethdev devargs. */
+ ret = mlx5_os_parse_eth_devargs(dev, ð_da);
+ if (ret != 0)
+ return ret;
+ /* Set default config data. */
+ mlx5_os_config_default(&config);
+ config.sf = 1;
+ /* Init spawn data. */
+ spawn.max_port = 1;
+ spawn.phys_port = 1;
+ spawn.phys_dev = mlx5_os_get_ibv_dev(dev);
+ if (spawn.phys_dev == NULL)
+ return -rte_errno;
+ ret = mlx5_auxiliary_get_ifindex(dev->name);
+ if (ret < 0) {
+ DRV_LOG(ERR, "failed to get ethdev ifindex: %s", dev->name);
+ return ret;
+ }
+ spawn.ifindex = ret;
+ spawn.numa_node = dev->numa_node;
+ /* Spawn device. */
+ eth_dev = mlx5_dev_spawn(dev, &spawn, &config, ð_da);
+ if (eth_dev == NULL)
+ return -rte_errno;
+ /* Post create. */
+ eth_dev->intr_handle = &adev->intr_handle;
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_RMV;
+ eth_dev->data->numa_node = dev->numa_node;
+ }
+ rte_eth_dev_probing_finish(eth_dev);
+ return 0;
+}
+
+/**
+ * Net class driver callback to probe a device.
+ *
+ * This function probe PCI bus device(s) or a single SF on auxiliary bus.
+ *
+ * @param[in] dev
+ * Pointer to the generic device.
+ *
+ * @return
+ * 0 on success, the function cannot fail.
+ */
+int
+mlx5_os_net_probe(struct rte_device *dev)
+{
+ int ret;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ mlx5_pmd_socket_init();
+ ret = mlx5_init_once();
+ if (ret) {
+ DRV_LOG(ERR, "unable to init PMD global data: %s",
+ strerror(rte_errno));
+ return -rte_errno;
+ }
+ if (mlx5_dev_is_pci(dev))
+ return mlx5_os_pci_probe(RTE_DEV_TO_PCI(dev));
+ else
+ return mlx5_os_auxiliary_probe(dev);
+}
+
static int
mlx5_config_doorbell_mapping_env(const struct mlx5_dev_config *config)
{
int dbmap_env;
int err = 0;
- sh->numa_node = spawn->pci_dev->device.numa_node;
pthread_mutex_init(&sh->txpp.mutex, NULL);
/*
* Configure environment variable "MLX5_BF_SHUT_UP"
DRV_LOG(DEBUG, "DevX is NOT supported");
err = 0;
}
+ if (!err && sh->ctx) {
+ /* Hint libmlx5 to use PMD allocator for data plane resources */
+ mlx5_glue->dv_set_context_attr(sh->ctx,
+ MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
+ (void *)((uintptr_t)&(struct mlx5dv_ctx_allocators){
+ .alloc = &mlx5_alloc_verbs_buf,
+ .free = &mlx5_free_verbs_buf,
+ .data = sh,
+ }));
+ }
return err;
}
int fd;
if (priv->sh) {
+ if (priv->q_counters != NULL &&
+ strcmp(ctr_name, "out_of_buffer") == 0)
+ return mlx5_devx_cmd_queue_counter_query
+ (priv->q_counters, 0, (uint32_t *)stat);
MKSTR(path, "%s/ports/%d/hw_counters/%s",
priv->sh->ibdev_path,
priv->dev_port,
mlx5_os_set_reg_mr_cb(mlx5_reg_mr_t *reg_mr_cb,
mlx5_dereg_mr_t *dereg_mr_cb)
{
- *reg_mr_cb = mlx5_verbs_ops.reg_mr;
- *dereg_mr_cb = mlx5_verbs_ops.dereg_mr;
+ *reg_mr_cb = mlx5_mr_verbs_ops.reg_mr;
+ *dereg_mr_cb = mlx5_mr_verbs_ops.dereg_mr;
}
/**
dev->data->mac_addrs,
MLX5_MAX_MAC_ADDRESSES, priv->mac_own);
}
-
-const struct eth_dev_ops mlx5_os_dev_ops = {
- .dev_configure = mlx5_dev_configure,
- .dev_start = mlx5_dev_start,
- .dev_stop = mlx5_dev_stop,
- .dev_set_link_down = mlx5_set_link_down,
- .dev_set_link_up = mlx5_set_link_up,
- .dev_close = mlx5_dev_close,
- .promiscuous_enable = mlx5_promiscuous_enable,
- .promiscuous_disable = mlx5_promiscuous_disable,
- .allmulticast_enable = mlx5_allmulticast_enable,
- .allmulticast_disable = mlx5_allmulticast_disable,
- .link_update = mlx5_link_update,
- .stats_get = mlx5_stats_get,
- .stats_reset = mlx5_stats_reset,
- .xstats_get = mlx5_xstats_get,
- .xstats_reset = mlx5_xstats_reset,
- .xstats_get_names = mlx5_xstats_get_names,
- .fw_version_get = mlx5_fw_version_get,
- .dev_infos_get = mlx5_dev_infos_get,
- .read_clock = mlx5_txpp_read_clock,
- .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
- .vlan_filter_set = mlx5_vlan_filter_set,
- .rx_queue_setup = mlx5_rx_queue_setup,
- .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
- .tx_queue_setup = mlx5_tx_queue_setup,
- .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
- .rx_queue_release = mlx5_rx_queue_release,
- .tx_queue_release = mlx5_tx_queue_release,
- .rx_queue_start = mlx5_rx_queue_start,
- .rx_queue_stop = mlx5_rx_queue_stop,
- .tx_queue_start = mlx5_tx_queue_start,
- .tx_queue_stop = mlx5_tx_queue_stop,
- .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
- .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
- .mac_addr_remove = mlx5_mac_addr_remove,
- .mac_addr_add = mlx5_mac_addr_add,
- .mac_addr_set = mlx5_mac_addr_set,
- .set_mc_addr_list = mlx5_set_mc_addr_list,
- .mtu_set = mlx5_dev_set_mtu,
- .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
- .vlan_offload_set = mlx5_vlan_offload_set,
- .reta_update = mlx5_dev_rss_reta_update,
- .reta_query = mlx5_dev_rss_reta_query,
- .rss_hash_update = mlx5_rss_hash_update,
- .rss_hash_conf_get = mlx5_rss_hash_conf_get,
- .filter_ctrl = mlx5_dev_filter_ctrl,
- .rxq_info_get = mlx5_rxq_info_get,
- .txq_info_get = mlx5_txq_info_get,
- .rx_burst_mode_get = mlx5_rx_burst_mode_get,
- .tx_burst_mode_get = mlx5_tx_burst_mode_get,
- .rx_queue_intr_enable = mlx5_rx_intr_enable,
- .rx_queue_intr_disable = mlx5_rx_intr_disable,
- .is_removed = mlx5_is_removed,
- .udp_tunnel_port_add = mlx5_udp_tunnel_port_add,
- .get_module_info = mlx5_get_module_info,
- .get_module_eeprom = mlx5_get_module_eeprom,
- .hairpin_cap_get = mlx5_hairpin_cap_get,
- .mtr_ops_get = mlx5_flow_meter_ops_get,
- .hairpin_bind = mlx5_hairpin_bind,
- .hairpin_unbind = mlx5_hairpin_unbind,
- .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
- .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
- .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
- .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
-};
-
-/* Available operations from secondary process. */
-const struct eth_dev_ops mlx5_os_dev_sec_ops = {
- .stats_get = mlx5_stats_get,
- .stats_reset = mlx5_stats_reset,
- .xstats_get = mlx5_xstats_get,
- .xstats_reset = mlx5_xstats_reset,
- .xstats_get_names = mlx5_xstats_get_names,
- .fw_version_get = mlx5_fw_version_get,
- .dev_infos_get = mlx5_dev_infos_get,
- .read_clock = mlx5_txpp_read_clock,
- .rx_queue_start = mlx5_rx_queue_start,
- .rx_queue_stop = mlx5_rx_queue_stop,
- .tx_queue_start = mlx5_tx_queue_start,
- .tx_queue_stop = mlx5_tx_queue_stop,
- .rxq_info_get = mlx5_rxq_info_get,
- .txq_info_get = mlx5_txq_info_get,
- .rx_burst_mode_get = mlx5_rx_burst_mode_get,
- .tx_burst_mode_get = mlx5_tx_burst_mode_get,
- .get_module_info = mlx5_get_module_info,
- .get_module_eeprom = mlx5_get_module_eeprom,
-};
-
-/* Available operations in flow isolated mode. */
-const struct eth_dev_ops mlx5_os_dev_ops_isolate = {
- .dev_configure = mlx5_dev_configure,
- .dev_start = mlx5_dev_start,
- .dev_stop = mlx5_dev_stop,
- .dev_set_link_down = mlx5_set_link_down,
- .dev_set_link_up = mlx5_set_link_up,
- .dev_close = mlx5_dev_close,
- .promiscuous_enable = mlx5_promiscuous_enable,
- .promiscuous_disable = mlx5_promiscuous_disable,
- .allmulticast_enable = mlx5_allmulticast_enable,
- .allmulticast_disable = mlx5_allmulticast_disable,
- .link_update = mlx5_link_update,
- .stats_get = mlx5_stats_get,
- .stats_reset = mlx5_stats_reset,
- .xstats_get = mlx5_xstats_get,
- .xstats_reset = mlx5_xstats_reset,
- .xstats_get_names = mlx5_xstats_get_names,
- .fw_version_get = mlx5_fw_version_get,
- .dev_infos_get = mlx5_dev_infos_get,
- .read_clock = mlx5_txpp_read_clock,
- .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
- .vlan_filter_set = mlx5_vlan_filter_set,
- .rx_queue_setup = mlx5_rx_queue_setup,
- .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
- .tx_queue_setup = mlx5_tx_queue_setup,
- .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
- .rx_queue_release = mlx5_rx_queue_release,
- .tx_queue_release = mlx5_tx_queue_release,
- .rx_queue_start = mlx5_rx_queue_start,
- .rx_queue_stop = mlx5_rx_queue_stop,
- .tx_queue_start = mlx5_tx_queue_start,
- .tx_queue_stop = mlx5_tx_queue_stop,
- .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
- .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
- .mac_addr_remove = mlx5_mac_addr_remove,
- .mac_addr_add = mlx5_mac_addr_add,
- .mac_addr_set = mlx5_mac_addr_set,
- .set_mc_addr_list = mlx5_set_mc_addr_list,
- .mtu_set = mlx5_dev_set_mtu,
- .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
- .vlan_offload_set = mlx5_vlan_offload_set,
- .filter_ctrl = mlx5_dev_filter_ctrl,
- .rxq_info_get = mlx5_rxq_info_get,
- .txq_info_get = mlx5_txq_info_get,
- .rx_burst_mode_get = mlx5_rx_burst_mode_get,
- .tx_burst_mode_get = mlx5_tx_burst_mode_get,
- .rx_queue_intr_enable = mlx5_rx_intr_enable,
- .rx_queue_intr_disable = mlx5_rx_intr_disable,
- .is_removed = mlx5_is_removed,
- .get_module_info = mlx5_get_module_info,
- .get_module_eeprom = mlx5_get_module_eeprom,
- .hairpin_cap_get = mlx5_hairpin_cap_get,
- .mtr_ops_get = mlx5_flow_meter_ops_get,
- .hairpin_bind = mlx5_hairpin_bind,
- .hairpin_unbind = mlx5_hairpin_unbind,
- .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
- .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
- .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
- .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
-};
git.droids-corp.org / dpdk.git / blobdiff