/* Device parameter to configure inline send. Deprecated, ignored.*/
#define MLX5_TXQ_INLINE "txq_inline"
+/* Device parameter to limit packet size to inline with ordinary SEND. */
+#define MLX5_TXQ_INLINE_MAX "txq_inline_max"
+
+/* Device parameter to configure minimal data size to inline. */
+#define MLX5_TXQ_INLINE_MIN "txq_inline_min"
+
+/* Device parameter to limit packet size to inline with Enhanced MPW. */
+#define MLX5_TXQ_INLINE_MPW "txq_inline_mpw"
+
/*
* Device parameter to configure the number of TX queues threshold for
* enabling inline send.
} else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
config->mprq.min_rxqs_num = tmp;
} else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
- DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
+ DRV_LOG(WARNING, "%s: deprecated parameter,"
+ " converted to txq_inline_max", key);
+ config->txq_inline_max = tmp;
+ } else if (strcmp(MLX5_TXQ_INLINE_MAX, key) == 0) {
+ config->txq_inline_max = tmp;
+ } else if (strcmp(MLX5_TXQ_INLINE_MIN, key) == 0) {
+ config->txq_inline_min = tmp;
+ } else if (strcmp(MLX5_TXQ_INLINE_MPW, key) == 0) {
+ config->txq_inline_mpw = tmp;
} else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
config->txqs_inline = tmp;
} else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) {
} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
- DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
+ DRV_LOG(WARNING, "%s: deprecated parameter,"
+ " converted to txq_inline_mpw", key);
+ config->txq_inline_mpw = tmp;
} else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
MLX5_RXQS_MIN_MPRQ,
MLX5_TXQ_INLINE,
+ MLX5_TXQ_INLINE_MIN,
+ MLX5_TXQ_INLINE_MAX,
+ MLX5_TXQ_INLINE_MPW,
MLX5_TXQS_MIN_INLINE,
MLX5_TXQS_MAX_VEC,
MLX5_TXQ_MPW_EN,
return ret;
}
+/**
+ * Configures the minimal amount of data to inline into WQE
+ * while sending packets.
+ *
+ * - the txq_inline_min has the maximal priority, if this
+ * key is specified in devargs
+ * - if DevX is enabled the inline mode is queried from the
+ * device (HCA attributes and NIC vport context if needed).
+ * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4LX
+ * and none (0 bytes) for other NICs
+ *
+ * @param spawn
+ * Verbs device parameters (name, port, switch_info) to spawn.
+ * @param config
+ * Device configuration parameters.
+ */
+static void
+mlx5_set_min_inline(struct mlx5_dev_spawn_data *spawn,
+ struct mlx5_dev_config *config)
+{
+ if (config->txq_inline_min != MLX5_ARG_UNSET) {
+ /* Application defines size of inlined data explicitly. */
+ switch (spawn->pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
+ if (config->txq_inline_min <
+ (int)MLX5_INLINE_HSIZE_L2) {
+ DRV_LOG(DEBUG,
+ "txq_inline_mix aligned to minimal"
+ " ConnectX-4 required value %d",
+ (int)MLX5_INLINE_HSIZE_L2);
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ }
+ break;
+ }
+ goto exit;
+ }
+ if (config->hca_attr.eth_net_offloads) {
+ /* We have DevX enabled, inline mode queried successfully. */
+ switch (config->hca_attr.wqe_inline_mode) {
+ case MLX5_CAP_INLINE_MODE_L2:
+ /* outer L2 header must be inlined. */
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ goto exit;
+ case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
+ /* No inline data are required by NIC. */
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ config->hw_vlan_insert =
+ config->hca_attr.wqe_vlan_insert;
+ DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
+ goto exit;
+ case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
+ /* inline mode is defined by NIC vport context. */
+ if (!config->hca_attr.eth_virt)
+ break;
+ switch (config->hca_attr.vport_inline_mode) {
+ case MLX5_INLINE_MODE_NONE:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_NONE;
+ goto exit;
+ case MLX5_INLINE_MODE_L2:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L2;
+ goto exit;
+ case MLX5_INLINE_MODE_IP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L3;
+ goto exit;
+ case MLX5_INLINE_MODE_TCP_UDP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L4;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_L2:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L2;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_IP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L3;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_TCP_UDP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L4;
+ goto exit;
+ }
+ }
+ }
+ /*
+ * We get here if we are unable to deduce
+ * inline data size with DevX. Try PCI ID
+ * to determine old NICs.
+ */
+ switch (spawn->pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ config->hw_vlan_insert = 0;
+ break;
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
+ /*
+ * These NICs support VLAN insertion from WQE and
+ * report the wqe_vlan_insert flag. But there is the bug
+ * and PFC control may be broken, so disable feature.
+ */
+ config->hw_vlan_insert = 0;
+ break;
+ default:
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ break;
+ }
+exit:
+ DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
+}
+
/**
* Spawn an Ethernet device from Verbs information.
*
#else
config.dv_esw_en = 0;
#endif
+ /* Detect minimal data bytes to inline. */
+ mlx5_set_min_inline(spawn, &config);
/* Store device configuration on private structure. */
priv->config = config;
if (config.dv_flow_en) {
.hw_padding = 0,
.mps = MLX5_ARG_UNSET,
.rx_vec_en = 1,
+ .txq_inline_max = MLX5_ARG_UNSET,
+ .txq_inline_min = MLX5_ARG_UNSET,
+ .txq_inline_mpw = MLX5_ARG_UNSET,
.txqs_inline = MLX5_ARG_UNSET,
.vf_nl_en = 1,
.mr_ext_memseg_en = 1,