/* Device parameter to enable hardware Rx vector. */
#define MLX5_RX_VEC_EN "rx_vec_en"
+/* Allow L3 VXLAN flow creation. */
+#define MLX5_L3_VXLAN_EN "l3_vxlan_en"
+
/* Activate Netlink support in VF mode. */
#define MLX5_VF_NL_EN "vf_nl_en"
priv->txqs_n = 0;
priv->txqs = NULL;
}
+ mlx5_flow_delete_drop_queue(dev);
if (priv->pd != NULL) {
assert(priv->ctx != NULL);
claim_zero(mlx5_glue->dealloc_pd(priv->pd));
config->tx_vec_en = !!tmp;
} else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
config->rx_vec_en = !!tmp;
+ } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
+ config->l3_vxlan_en = !!tmp;
} else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
config->vf_nl_en = !!tmp;
} else {
MLX5_TXQ_MAX_INLINE_LEN,
MLX5_TX_VEC_EN,
MLX5_RX_VEC_EN,
+ MLX5_L3_VXLAN_EN,
MLX5_VF_NL_EN,
NULL,
};
unsigned int mps;
unsigned int cqe_comp;
unsigned int tunnel_en = 0;
+ unsigned int swp = 0;
+ unsigned int verb_priorities = 0;
int idx;
int i;
struct mlx5dv_context attrs_out = {0};
}
ibv_dev = list[i];
DRV_LOG(DEBUG, "device opened");
+#ifdef HAVE_IBV_MLX5_MOD_SWP
+ attrs_out.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
+#endif
/*
* Multi-packet send is supported by ConnectX-4 Lx PF as well
* as all ConnectX-5 devices.
DRV_LOG(DEBUG, "MPW isn't supported");
mps = MLX5_MPW_DISABLED;
}
+#ifdef HAVE_IBV_MLX5_MOD_SWP
+ if (attrs_out.comp_mask | MLX5DV_CONTEXT_MASK_SWP)
+ swp = attrs_out.sw_parsing_caps.sw_parsing_offloads;
+ DRV_LOG(DEBUG, "SWP support: %u", swp);
+#endif
if (RTE_CACHE_LINE_SIZE == 128 &&
!(attrs_out.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
cqe_comp = 0;
.txqs_inline = MLX5_ARG_UNSET,
.inline_max_packet_sz = MLX5_ARG_UNSET,
.vf_nl_en = 1,
+ .swp = !!swp,
};
len = snprintf(name, sizeof(name), PCI_PRI_FMT,
goto error;
/* Receive command fd from primary process */
err = mlx5_socket_connect(eth_dev);
- if (err)
+ if (err < 0)
goto error;
/* Remap UAR for Tx queues. */
err = mlx5_tx_uar_remap(eth_dev, err);
mlx5_link_update(eth_dev, 0);
/* Store device configuration on private structure. */
priv->config = config;
+ /* Create drop queue. */
+ err = mlx5_flow_create_drop_queue(eth_dev);
+ if (err) {
+ DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
+ eth_dev->data->port_id, strerror(rte_errno));
+ goto port_error;
+ }
+ /* Supported Verbs flow priority number detection. */
+ if (verb_priorities == 0)
+ verb_priorities = mlx5_get_max_verbs_prio(eth_dev);
+ if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) {
+ DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u",
+ eth_dev->data->port_id, verb_priorities);
+ goto port_error;
+ }
+ priv->config.max_verbs_prio = verb_priorities;
continue;
port_error:
if (priv)
static void
rte_mlx5_pmd_init(void)
{
- /* Build the static table for ptype conversion. */
+ /* Build the static tables for Verbs conversion. */
mlx5_set_ptype_table();
+ mlx5_set_cksum_table();
+ mlx5_set_swp_types_table();
/*
* RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
* huge pages. Calling ibv_fork_init() during init allows