#include <rte_malloc.h>
#include <ethdev_driver.h>
-#include <ethdev_pci.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_common.h>
#include <rte_rwlock.h>
#include <rte_spinlock.h>
#include <rte_string_fns.h>
+#include <rte_eal_paging.h>
#include <rte_alarm.h>
#include <rte_cycles.h>
#include <mlx5_common.h>
#include <mlx5_common_os.h>
#include <mlx5_common_mp.h>
-#include <mlx5_common_pci.h>
#include <mlx5_malloc.h>
#include "mlx5_defs.h"
#include "mlx5_rx.h"
#include "mlx5_tx.h"
#include "mlx5_autoconf.h"
-#include "mlx5_mr.h"
#include "mlx5_flow.h"
#include "mlx5_flow_os.h"
#include "rte_pmd_mlx5.h"
+#define MLX5_ETH_DRIVER_NAME mlx5_eth
+
+/* Driver type key for new device global syntax. */
+#define MLX5_DRIVER_KEY "driver"
+
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
/* Decap will be used or not. */
#define MLX5_DECAP_EN "decap_en"
+/* Device parameter to configure allow or prevent duplicate rules pattern. */
+#define MLX5_ALLOW_DUPLICATE_PATTERN "allow_duplicate_pattern"
+
+/* Device parameter to configure implicit registration of mempool memory. */
+#define MLX5_MR_MEMPOOL_REG_EN "mr_mempool_reg_en"
+
+/* Device parameter to configure the delay drop when creating Rxqs. */
+#define MLX5_DELAY_DROP "delay_drop"
+
/* Shared memory between primary and secondary processes. */
struct mlx5_shared_data *mlx5_shared_data;
.grow_trunk = 3,
.grow_shift = 2,
.need_lock = 1,
- .release_mem_en = 1,
+ .release_mem_en = 0,
+ .per_core_cache = (1 << 16),
.malloc = mlx5_malloc,
.free = mlx5_free,
.type = "mlx5_tag_ipool",
.grow_trunk = 3,
.grow_shift = 2,
.need_lock = 1,
- .release_mem_en = 1,
+ .release_mem_en = 0,
+ .per_core_cache = 1 << 19,
.malloc = mlx5_malloc,
.free = mlx5_free,
.type = "mlx5_flow_handle_ipool",
.free = mlx5_free,
.type = "mlx5_shared_action_rss",
},
+ [MLX5_IPOOL_MTR_POLICY] = {
+ /**
+ * The ipool index should grow continually from small to big,
+ * for policy idx, so not set grow_trunk to avoid policy index
+ * not jump continually.
+ */
+ .size = sizeof(struct mlx5_flow_meter_sub_policy),
+ .trunk_size = 64,
+ .need_lock = 1,
+ .release_mem_en = 1,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
+ .type = "mlx5_meter_policy_ipool",
+ },
};
-
#define MLX5_FLOW_MIN_ID_POOL_SIZE 512
#define MLX5_ID_GENERATION_ARRAY_FACTOR 16
-#define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 4096
+#define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 1024
/**
* Decide whether representor ID is a HPF(host PF) port on BF2.
MLX5_REPRESENTOR_REPR(-1) == repr;
}
+/**
+ * Decide whether representor ID is a SF port representor.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * Non-zero if HPF, otherwise 0.
+ */
+bool
+mlx5_is_sf_repr(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ int type = MLX5_REPRESENTOR_TYPE(priv->representor_id);
+
+ return priv->representor != 0 && type == RTE_ETH_REPRESENTOR_SF;
+}
+
/**
* Initialize the ASO aging management structure.
*
mlx5_free(sh->aso_age_mng);
return -1;
}
- rte_spinlock_init(&sh->aso_age_mng->resize_sl);
+ rte_rwlock_init(&sh->aso_age_mng->resize_rwl);
rte_spinlock_init(&sh->aso_age_mng->free_sl);
LIST_INIT(&sh->aso_age_mng->free);
return 0;
uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
LIST_REMOVE(mng, next);
- claim_zero(mlx5_devx_cmd_destroy(mng->dm));
- claim_zero(mlx5_os_umem_dereg(mng->umem));
+ mlx5_os_wrapped_mkey_destroy(&mng->wm);
mlx5_free(mem);
}
* Pointer to mlx5_dev_ctx_shared object to free
*/
int
-mlx5_aso_flow_mtrs_mng_init(struct mlx5_priv *priv)
+mlx5_aso_flow_mtrs_mng_init(struct mlx5_dev_ctx_shared *sh)
{
- if (!priv->mtr_idx_tbl) {
- priv->mtr_idx_tbl = mlx5_l3t_create(MLX5_L3T_TYPE_DWORD);
- if (!priv->mtr_idx_tbl) {
- DRV_LOG(ERR, "fail to create meter lookup table.");
- rte_errno = ENOMEM;
- return -ENOMEM;
- }
- }
- if (!priv->sh->mtrmng) {
- priv->sh->mtrmng = mlx5_malloc(MLX5_MEM_ZERO,
- sizeof(*priv->sh->mtrmng),
+ if (!sh->mtrmng) {
+ sh->mtrmng = mlx5_malloc(MLX5_MEM_ZERO,
+ sizeof(*sh->mtrmng),
RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
- if (!priv->sh->mtrmng) {
- DRV_LOG(ERR, "mlx5_aso_mtr_pools_mng allocation was failed.");
+ if (!sh->mtrmng) {
+ DRV_LOG(ERR,
+ "meter management allocation was failed.");
rte_errno = ENOMEM;
return -ENOMEM;
}
- rte_spinlock_init(&priv->sh->mtrmng->mtrsl);
- LIST_INIT(&priv->sh->mtrmng->meters);
+ if (sh->meter_aso_en) {
+ rte_spinlock_init(&sh->mtrmng->pools_mng.mtrsl);
+ rte_rwlock_init(&sh->mtrmng->pools_mng.resize_mtrwl);
+ LIST_INIT(&sh->mtrmng->pools_mng.meters);
+ }
+ sh->mtrmng->def_policy_id = MLX5_INVALID_POLICY_ID;
}
return 0;
}
mlx5_aso_flow_mtrs_mng_close(struct mlx5_dev_ctx_shared *sh)
{
struct mlx5_aso_mtr_pool *mtr_pool;
- struct mlx5_aso_mtr_pools_mng *mtrmng = sh->mtrmng;
+ struct mlx5_flow_mtr_mng *mtrmng = sh->mtrmng;
uint32_t idx;
#ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
struct mlx5_aso_mtr *aso_mtr;
int i;
#endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
- mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_POLICER);
- idx = mtrmng->n_valid;
- while (idx--) {
- mtr_pool = mtrmng->pools[idx];
+ if (sh->meter_aso_en) {
+ mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_POLICER);
+ idx = mtrmng->pools_mng.n_valid;
+ while (idx--) {
+ mtr_pool = mtrmng->pools_mng.pools[idx];
#ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
- for (i = 0; i < MLX5_ASO_MTRS_PER_POOL; i++) {
- aso_mtr = &mtr_pool->mtrs[i];
- if (aso_mtr->fm.meter_action)
- claim_zero(mlx5_glue->destroy_flow_action
- (aso_mtr->fm.meter_action));
- }
+ for (i = 0; i < MLX5_ASO_MTRS_PER_POOL; i++) {
+ aso_mtr = &mtr_pool->mtrs[i];
+ if (aso_mtr->fm.meter_action)
+ claim_zero
+ (mlx5_glue->destroy_flow_action
+ (aso_mtr->fm.meter_action));
+ }
#endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
- claim_zero(mlx5_devx_cmd_destroy
+ claim_zero(mlx5_devx_cmd_destroy
(mtr_pool->devx_obj));
- mtrmng->n_valid--;
- mlx5_free(mtr_pool);
+ mtrmng->pools_mng.n_valid--;
+ mlx5_free(mtr_pool);
+ }
+ mlx5_free(sh->mtrmng->pools_mng.pools);
}
- mlx5_free(sh->mtrmng->pools);
mlx5_free(sh->mtrmng);
sh->mtrmng = NULL;
}
age_info = &sh->port[i].age_info;
if (!MLX5_AGE_GET(age_info, MLX5_AGE_EVENT_NEW))
continue;
- if (MLX5_AGE_GET(age_info, MLX5_AGE_TRIGGER))
+ MLX5_AGE_UNSET(age_info, MLX5_AGE_EVENT_NEW);
+ if (MLX5_AGE_GET(age_info, MLX5_AGE_TRIGGER)) {
+ MLX5_AGE_UNSET(age_info, MLX5_AGE_TRIGGER);
rte_eth_dev_callback_process
(&rte_eth_devices[sh->port[i].devx_ih_port_id],
RTE_ETH_EVENT_FLOW_AGED, NULL);
- age_info->flags = 0;
+ }
}
}
+/*
+ * Initialize the ASO connection tracking structure.
+ *
+ * @param[in] sh
+ * Pointer to mlx5_dev_ctx_shared object.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_aso_ct_mng_init(struct mlx5_dev_ctx_shared *sh)
+{
+ int err;
+
+ if (sh->ct_mng)
+ return 0;
+ sh->ct_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->ct_mng),
+ RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
+ if (!sh->ct_mng) {
+ DRV_LOG(ERR, "ASO CT management allocation failed.");
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+ err = mlx5_aso_queue_init(sh, ASO_OPC_MOD_CONNECTION_TRACKING);
+ if (err) {
+ mlx5_free(sh->ct_mng);
+ /* rte_errno should be extracted from the failure. */
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ rte_spinlock_init(&sh->ct_mng->ct_sl);
+ rte_rwlock_init(&sh->ct_mng->resize_rwl);
+ LIST_INIT(&sh->ct_mng->free_cts);
+ return 0;
+}
+
+/*
+ * Close and release all the resources of the
+ * ASO connection tracking management structure.
+ *
+ * @param[in] sh
+ * Pointer to mlx5_dev_ctx_shared object to free.
+ */
+static void
+mlx5_flow_aso_ct_mng_close(struct mlx5_dev_ctx_shared *sh)
+{
+ struct mlx5_aso_ct_pools_mng *mng = sh->ct_mng;
+ struct mlx5_aso_ct_pool *ct_pool;
+ struct mlx5_aso_ct_action *ct;
+ uint32_t idx;
+ uint32_t val;
+ uint32_t cnt;
+ int i;
+
+ mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_CONNECTION_TRACKING);
+ idx = mng->next;
+ while (idx--) {
+ cnt = 0;
+ ct_pool = mng->pools[idx];
+ for (i = 0; i < MLX5_ASO_CT_ACTIONS_PER_POOL; i++) {
+ ct = &ct_pool->actions[i];
+ val = __atomic_fetch_sub(&ct->refcnt, 1,
+ __ATOMIC_RELAXED);
+ MLX5_ASSERT(val == 1);
+ if (val > 1)
+ cnt++;
+#ifdef HAVE_MLX5_DR_ACTION_ASO_CT
+ if (ct->dr_action_orig)
+ claim_zero(mlx5_glue->destroy_flow_action
+ (ct->dr_action_orig));
+ if (ct->dr_action_rply)
+ claim_zero(mlx5_glue->destroy_flow_action
+ (ct->dr_action_rply));
+#endif
+ }
+ claim_zero(mlx5_devx_cmd_destroy(ct_pool->devx_obj));
+ if (cnt) {
+ DRV_LOG(DEBUG, "%u ASO CT objects are being used in the pool %u",
+ cnt, i);
+ }
+ mlx5_free(ct_pool);
+ /* in case of failure. */
+ mng->next--;
+ }
+ mlx5_free(mng->pools);
+ mlx5_free(mng);
+ /* Management structure must be cleared to 0s during allocation. */
+ sh->ct_mng = NULL;
+}
+
/**
* Initialize the flow resources' indexed mempool.
*
* @param[in] sh
* Pointer to mlx5_dev_ctx_shared object.
- * @param[in] sh
+ * @param[in] config
* Pointer to user dev config.
*/
static void
MLX5_FLOW_HANDLE_VERBS_SIZE;
break;
}
- if (config->reclaim_mode)
+ if (config->reclaim_mode) {
cfg.release_mem_en = 1;
+ cfg.per_core_cache = 0;
+ } else {
+ cfg.release_mem_en = 0;
+ }
sh->ipool[i] = mlx5_ipool_create(&cfg);
}
}
+
/**
* Release the flow resources' indexed mempool.
*
for (i = 0; i < MLX5_IPOOL_MAX; ++i)
mlx5_ipool_destroy(sh->ipool[i]);
+ for (i = 0; i < MLX5_MAX_MODIFY_NUM; ++i)
+ if (sh->mdh_ipools[i])
+ mlx5_ipool_destroy(sh->mdh_ipools[i]);
}
/*
mlx5_flex_parser_ecpri_exist(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_flex_parser_profiles *prf =
- &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
+ struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
return !!prf->obj;
}
mlx5_flex_parser_ecpri_alloc(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_flex_parser_profiles *prf =
- &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
+ struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
struct mlx5_devx_graph_node_attr node = {
.modify_field_select = 0,
};
* start after the common header that with the length of a DW(u32).
*/
node.sample[1].flow_match_sample_field_base_offset = sizeof(uint32_t);
- prf->obj = mlx5_devx_cmd_create_flex_parser(priv->sh->ctx, &node);
+ prf->obj = mlx5_devx_cmd_create_flex_parser(priv->sh->cdev->ctx, &node);
if (!prf->obj) {
DRV_LOG(ERR, "Failed to create flex parser node object.");
return (rte_errno == 0) ? -ENODEV : -rte_errno;
mlx5_flex_parser_ecpri_release(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_flex_parser_profiles *prf =
- &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
+ struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
if (prf->obj)
mlx5_devx_cmd_destroy(prf->obj);
prf->obj = NULL;
}
-/*
- * Allocate Rx and Tx UARs in robust fashion.
- * This routine handles the following UAR allocation issues:
+uint32_t
+mlx5_get_supported_sw_parsing_offloads(const struct mlx5_hca_attr *attr)
+{
+ uint32_t sw_parsing_offloads = 0;
+
+ if (attr->swp) {
+ sw_parsing_offloads |= MLX5_SW_PARSING_CAP;
+ if (attr->swp_csum)
+ sw_parsing_offloads |= MLX5_SW_PARSING_CSUM_CAP;
+
+ if (attr->swp_lso)
+ sw_parsing_offloads |= MLX5_SW_PARSING_TSO_CAP;
+ }
+ return sw_parsing_offloads;
+}
+
+uint32_t
+mlx5_get_supported_tunneling_offloads(const struct mlx5_hca_attr *attr)
+{
+ uint32_t tn_offloads = 0;
+
+ if (attr->tunnel_stateless_vxlan)
+ tn_offloads |= MLX5_TUNNELED_OFFLOADS_VXLAN_CAP;
+ if (attr->tunnel_stateless_gre)
+ tn_offloads |= MLX5_TUNNELED_OFFLOADS_GRE_CAP;
+ if (attr->tunnel_stateless_geneve_rx)
+ tn_offloads |= MLX5_TUNNELED_OFFLOADS_GENEVE_CAP;
+ return tn_offloads;
+}
+
+/* Fill all fields of UAR structure. */
+static int
+mlx5_rxtx_uars_prepare(struct mlx5_dev_ctx_shared *sh)
+{
+ int ret;
+
+ ret = mlx5_devx_uar_prepare(sh->cdev, &sh->tx_uar);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to prepare Tx DevX UAR.");
+ return -rte_errno;
+ }
+ MLX5_ASSERT(sh->tx_uar.obj);
+ MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->tx_uar.obj));
+ ret = mlx5_devx_uar_prepare(sh->cdev, &sh->rx_uar);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to prepare Rx DevX UAR.");
+ mlx5_devx_uar_release(&sh->tx_uar);
+ return -rte_errno;
+ }
+ MLX5_ASSERT(sh->rx_uar.obj);
+ MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->rx_uar.obj));
+ return 0;
+}
+
+static void
+mlx5_rxtx_uars_release(struct mlx5_dev_ctx_shared *sh)
+{
+ mlx5_devx_uar_release(&sh->rx_uar);
+ mlx5_devx_uar_release(&sh->tx_uar);
+}
+
+/**
+ * rte_mempool_walk() callback to unregister Rx mempools.
+ * It used when implicit mempool registration is disabled.
*
- * - tries to allocate the UAR with the most appropriate memory
- * mapping type from the ones supported by the host
+ * @param mp
+ * The mempool being walked.
+ * @param arg
+ * Pointer to the device shared context.
+ */
+static void
+mlx5_dev_ctx_shared_rx_mempool_unregister_cb(struct rte_mempool *mp, void *arg)
+{
+ struct mlx5_dev_ctx_shared *sh = arg;
+
+ mlx5_dev_mempool_unregister(sh->cdev, mp);
+}
+
+/**
+ * Callback used when implicit mempool registration is disabled
+ * in order to track Rx mempool destruction.
*
- * - tries to allocate the UAR with non-NULL base address
- * OFED 5.0.x and Upstream rdma_core before v29 returned the NULL as
- * UAR base address if UAR was not the first object in the UAR page.
- * It caused the PMD failure and we should try to get another UAR
- * till we get the first one with non-NULL base address returned.
+ * @param event
+ * Mempool life cycle event.
+ * @param mp
+ * An Rx mempool registered explicitly when the port is started.
+ * @param arg
+ * Pointer to a device shared context.
*/
-static int
-mlx5_alloc_rxtx_uars(struct mlx5_dev_ctx_shared *sh,
- const struct mlx5_dev_config *config)
+static void
+mlx5_dev_ctx_shared_rx_mempool_event_cb(enum rte_mempool_event event,
+ struct rte_mempool *mp, void *arg)
{
- uint32_t uar_mapping, retry;
- int err = 0;
- void *base_addr;
-
- for (retry = 0; retry < MLX5_ALLOC_UAR_RETRY; ++retry) {
-#ifdef MLX5DV_UAR_ALLOC_TYPE_NC
- /* Control the mapping type according to the settings. */
- uar_mapping = (config->dbnc == MLX5_TXDB_NCACHED) ?
- MLX5DV_UAR_ALLOC_TYPE_NC :
- MLX5DV_UAR_ALLOC_TYPE_BF;
-#else
- RTE_SET_USED(config);
- /*
- * It seems we have no way to control the memory mapping type
- * for the UAR, the default "Write-Combining" type is supposed.
- * The UAR initialization on queue creation queries the
- * actual mapping type done by Verbs/kernel and setups the
- * PMD datapath accordingly.
- */
- uar_mapping = 0;
-#endif
- sh->tx_uar = mlx5_glue->devx_alloc_uar(sh->ctx, uar_mapping);
-#ifdef MLX5DV_UAR_ALLOC_TYPE_NC
- if (!sh->tx_uar &&
- uar_mapping == MLX5DV_UAR_ALLOC_TYPE_BF) {
- if (config->dbnc == MLX5_TXDB_CACHED ||
- config->dbnc == MLX5_TXDB_HEURISTIC)
- DRV_LOG(WARNING, "Devarg tx_db_nc setting "
- "is not supported by DevX");
- /*
- * In some environments like virtual machine
- * the Write Combining mapped might be not supported
- * and UAR allocation fails. We try "Non-Cached"
- * mapping for the case. The tx_burst routines take
- * the UAR mapping type into account on UAR setup
- * on queue creation.
- */
- DRV_LOG(DEBUG, "Failed to allocate Tx DevX UAR (BF)");
- uar_mapping = MLX5DV_UAR_ALLOC_TYPE_NC;
- sh->tx_uar = mlx5_glue->devx_alloc_uar
- (sh->ctx, uar_mapping);
- } else if (!sh->tx_uar &&
- uar_mapping == MLX5DV_UAR_ALLOC_TYPE_NC) {
- if (config->dbnc == MLX5_TXDB_NCACHED)
- DRV_LOG(WARNING, "Devarg tx_db_nc settings "
- "is not supported by DevX");
- /*
- * If Verbs/kernel does not support "Non-Cached"
- * try the "Write-Combining".
- */
- DRV_LOG(DEBUG, "Failed to allocate Tx DevX UAR (NC)");
- uar_mapping = MLX5DV_UAR_ALLOC_TYPE_BF;
- sh->tx_uar = mlx5_glue->devx_alloc_uar
- (sh->ctx, uar_mapping);
- }
-#endif
- if (!sh->tx_uar) {
- DRV_LOG(ERR, "Failed to allocate Tx DevX UAR (BF/NC)");
- err = ENOMEM;
- goto exit;
- }
- base_addr = mlx5_os_get_devx_uar_base_addr(sh->tx_uar);
- if (base_addr)
- break;
- /*
- * The UARs are allocated by rdma_core within the
- * IB device context, on context closure all UARs
- * will be freed, should be no memory/object leakage.
- */
- DRV_LOG(DEBUG, "Retrying to allocate Tx DevX UAR");
- sh->tx_uar = NULL;
- }
- /* Check whether we finally succeeded with valid UAR allocation. */
- if (!sh->tx_uar) {
- DRV_LOG(ERR, "Failed to allocate Tx DevX UAR (NULL base)");
- err = ENOMEM;
- goto exit;
+ struct mlx5_dev_ctx_shared *sh = arg;
+
+ if (event == RTE_MEMPOOL_EVENT_DESTROY)
+ mlx5_dev_mempool_unregister(sh->cdev, mp);
+}
+
+int
+mlx5_dev_ctx_shared_mempool_subscribe(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ int ret;
+
+ /* Check if we only need to track Rx mempool destruction. */
+ if (!sh->cdev->config.mr_mempool_reg_en) {
+ ret = rte_mempool_event_callback_register
+ (mlx5_dev_ctx_shared_rx_mempool_event_cb, sh);
+ return ret == 0 || rte_errno == EEXIST ? 0 : ret;
}
- for (retry = 0; retry < MLX5_ALLOC_UAR_RETRY; ++retry) {
- uar_mapping = 0;
- sh->devx_rx_uar = mlx5_glue->devx_alloc_uar
- (sh->ctx, uar_mapping);
-#ifdef MLX5DV_UAR_ALLOC_TYPE_NC
- if (!sh->devx_rx_uar &&
- uar_mapping == MLX5DV_UAR_ALLOC_TYPE_BF) {
- /*
- * Rx UAR is used to control interrupts only,
- * should be no datapath noticeable impact,
- * can try "Non-Cached" mapping safely.
- */
- DRV_LOG(DEBUG, "Failed to allocate Rx DevX UAR (BF)");
- uar_mapping = MLX5DV_UAR_ALLOC_TYPE_NC;
- sh->devx_rx_uar = mlx5_glue->devx_alloc_uar
- (sh->ctx, uar_mapping);
+ return mlx5_dev_mempool_subscribe(sh->cdev);
+}
+
+/**
+ * Set up multiple TISs with different affinities according to
+ * number of bonding ports
+ *
+ * @param priv
+ * Pointer of shared context.
+ *
+ * @return
+ * Zero on success, -1 otherwise.
+ */
+static int
+mlx5_setup_tis(struct mlx5_dev_ctx_shared *sh)
+{
+ int i;
+ struct mlx5_devx_lag_context lag_ctx = { 0 };
+ struct mlx5_devx_tis_attr tis_attr = { 0 };
+
+ tis_attr.transport_domain = sh->td->id;
+ if (sh->bond.n_port) {
+ if (!mlx5_devx_cmd_query_lag(sh->cdev->ctx, &lag_ctx)) {
+ sh->lag.tx_remap_affinity[0] =
+ lag_ctx.tx_remap_affinity_1;
+ sh->lag.tx_remap_affinity[1] =
+ lag_ctx.tx_remap_affinity_2;
+ sh->lag.affinity_mode = lag_ctx.port_select_mode;
+ } else {
+ DRV_LOG(ERR, "Failed to query lag affinity.");
+ return -1;
}
-#endif
- if (!sh->devx_rx_uar) {
- DRV_LOG(ERR, "Failed to allocate Rx DevX UAR (BF/NC)");
- err = ENOMEM;
- goto exit;
+ if (sh->lag.affinity_mode == MLX5_LAG_MODE_TIS) {
+ for (i = 0; i < sh->bond.n_port; i++) {
+ tis_attr.lag_tx_port_affinity =
+ MLX5_IFC_LAG_MAP_TIS_AFFINITY(i,
+ sh->bond.n_port);
+ sh->tis[i] = mlx5_devx_cmd_create_tis(sh->cdev->ctx,
+ &tis_attr);
+ if (!sh->tis[i]) {
+ DRV_LOG(ERR, "Failed to TIS %d/%d for bonding device"
+ " %s.", i, sh->bond.n_port,
+ sh->ibdev_name);
+ return -1;
+ }
+ }
+ DRV_LOG(DEBUG, "LAG number of ports : %d, affinity_1 & 2 : pf%d & %d.\n",
+ sh->bond.n_port, lag_ctx.tx_remap_affinity_1,
+ lag_ctx.tx_remap_affinity_2);
+ return 0;
}
- base_addr = mlx5_os_get_devx_uar_base_addr(sh->devx_rx_uar);
- if (base_addr)
- break;
- /*
- * The UARs are allocated by rdma_core within the
- * IB device context, on context closure all UARs
- * will be freed, should be no memory/object leakage.
- */
- DRV_LOG(DEBUG, "Retrying to allocate Rx DevX UAR");
- sh->devx_rx_uar = NULL;
+ if (sh->lag.affinity_mode == MLX5_LAG_MODE_HASH)
+ DRV_LOG(INFO, "Device %s enabled HW hash based LAG.",
+ sh->ibdev_name);
}
- /* Check whether we finally succeeded with valid UAR allocation. */
- if (!sh->devx_rx_uar) {
- DRV_LOG(ERR, "Failed to allocate Rx DevX UAR (NULL base)");
- err = ENOMEM;
+ tis_attr.lag_tx_port_affinity = 0;
+ sh->tis[0] = mlx5_devx_cmd_create_tis(sh->cdev->ctx, &tis_attr);
+ if (!sh->tis[0]) {
+ DRV_LOG(ERR, "Failed to TIS 0 for bonding device"
+ " %s.", sh->ibdev_name);
+ return -1;
}
-exit:
- return err;
+ return 0;
}
/**
*/
struct mlx5_dev_ctx_shared *
mlx5_alloc_shared_dev_ctx(const struct mlx5_dev_spawn_data *spawn,
- const struct mlx5_dev_config *config)
+ const struct mlx5_dev_config *config)
{
struct mlx5_dev_ctx_shared *sh;
int err = 0;
uint32_t i;
- struct mlx5_devx_tis_attr tis_attr = { 0 };
MLX5_ASSERT(spawn);
/* Secondary process should not create the shared context. */
pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
/* Search for IB context by device name. */
LIST_FOREACH(sh, &mlx5_dev_ctx_list, next) {
- if (!strcmp(sh->ibdev_name,
- mlx5_os_get_dev_device_name(spawn->phys_dev))) {
+ if (!strcmp(sh->ibdev_name, spawn->phys_dev_name)) {
sh->refcnt++;
goto exit;
}
rte_errno = ENOMEM;
goto exit;
}
+ pthread_mutex_init(&sh->txpp.mutex, NULL);
+ sh->numa_node = spawn->cdev->dev->numa_node;
+ sh->cdev = spawn->cdev;
+ sh->devx = sh->cdev->config.devx;
if (spawn->bond_info)
sh->bond = *spawn->bond_info;
- err = mlx5_os_open_device(spawn, config, sh);
- if (!sh->ctx)
- goto error;
- err = mlx5_os_get_dev_attr(sh->ctx, &sh->device_attr);
+ err = mlx5_os_get_dev_attr(sh->cdev, &sh->device_attr);
if (err) {
DRV_LOG(DEBUG, "mlx5_os_get_dev_attr() failed");
goto error;
}
sh->refcnt = 1;
sh->max_port = spawn->max_port;
- strncpy(sh->ibdev_name, mlx5_os_get_ctx_device_name(sh->ctx),
+ sh->reclaim_mode = config->reclaim_mode;
+ strncpy(sh->ibdev_name, mlx5_os_get_ctx_device_name(sh->cdev->ctx),
sizeof(sh->ibdev_name) - 1);
- strncpy(sh->ibdev_path, mlx5_os_get_ctx_device_path(sh->ctx),
+ strncpy(sh->ibdev_path, mlx5_os_get_ctx_device_path(sh->cdev->ctx),
sizeof(sh->ibdev_path) - 1);
/*
* Setting port_id to max unallowed value means
sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
sh->port[i].devx_ih_port_id = RTE_MAX_ETHPORTS;
}
- sh->pd = mlx5_os_alloc_pd(sh->ctx);
- if (sh->pd == NULL) {
- DRV_LOG(ERR, "PD allocation failure");
- err = ENOMEM;
- goto error;
- }
if (sh->devx) {
- err = mlx5_os_get_pdn(sh->pd, &sh->pdn);
- if (err) {
- DRV_LOG(ERR, "Fail to extract pdn from PD");
- goto error;
- }
- sh->td = mlx5_devx_cmd_create_td(sh->ctx);
+ sh->td = mlx5_devx_cmd_create_td(sh->cdev->ctx);
if (!sh->td) {
DRV_LOG(ERR, "TD allocation failure");
err = ENOMEM;
goto error;
}
- tis_attr.transport_domain = sh->td->id;
- sh->tis = mlx5_devx_cmd_create_tis(sh->ctx, &tis_attr);
- if (!sh->tis) {
+ if (mlx5_setup_tis(sh)) {
DRV_LOG(ERR, "TIS allocation failure");
err = ENOMEM;
goto error;
}
- err = mlx5_alloc_rxtx_uars(sh, config);
+ err = mlx5_rxtx_uars_prepare(sh);
if (err)
goto error;
- MLX5_ASSERT(sh->tx_uar);
- MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->tx_uar));
-
- MLX5_ASSERT(sh->devx_rx_uar);
- MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->devx_rx_uar));
- }
#ifndef RTE_ARCH_64
- /* Initialize UAR access locks for 32bit implementations. */
- rte_spinlock_init(&sh->uar_lock_cq);
- for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
- rte_spinlock_init(&sh->uar_lock[i]);
+ } else {
+ /* Initialize UAR access locks for 32bit implementations. */
+ rte_spinlock_init(&sh->uar_lock_cq);
+ for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
+ rte_spinlock_init(&sh->uar_lock[i]);
#endif
- /*
- * Once the device is added to the list of memory event
- * callback, its global MR cache table cannot be expanded
- * on the fly because of deadlock. If it overflows, lookup
- * should be done by searching MR list linearly, which is slow.
- *
- * At this point the device is not added to the memory
- * event list yet, context is just being created.
- */
- err = mlx5_mr_btree_init(&sh->share_cache.cache,
- MLX5_MR_BTREE_CACHE_N * 2,
- spawn->pci_dev->device.numa_node);
- if (err) {
- err = rte_errno;
- goto error;
}
- mlx5_os_set_reg_mr_cb(&sh->share_cache.reg_mr_cb,
- &sh->share_cache.dereg_mr_cb);
mlx5_os_dev_shared_handler_install(sh);
- sh->cnt_id_tbl = mlx5_l3t_create(MLX5_L3T_TYPE_DWORD);
- if (!sh->cnt_id_tbl) {
- err = rte_errno;
- goto error;
- }
if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
err = mlx5_flow_os_init_workspace_once();
if (err)
mlx5_flow_aging_init(sh);
mlx5_flow_counters_mng_init(sh);
mlx5_flow_ipool_create(sh, config);
- /* Add device to memory callback list. */
- rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
- LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
- sh, mem_event_cb);
- rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
/* Add context to the global device list. */
LIST_INSERT_HEAD(&mlx5_dev_ctx_list, sh, next);
rte_spinlock_init(&sh->geneve_tlv_opt_sl);
pthread_mutex_destroy(&sh->txpp.mutex);
pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
MLX5_ASSERT(sh);
- if (sh->cnt_id_tbl)
- mlx5_l3t_destroy(sh->cnt_id_tbl);
- if (sh->tis)
- claim_zero(mlx5_devx_cmd_destroy(sh->tis));
if (sh->td)
claim_zero(mlx5_devx_cmd_destroy(sh->td));
- if (sh->devx_rx_uar)
- mlx5_glue->devx_free_uar(sh->devx_rx_uar);
- if (sh->tx_uar)
- mlx5_glue->devx_free_uar(sh->tx_uar);
- if (sh->pd)
- claim_zero(mlx5_os_dealloc_pd(sh->pd));
- if (sh->ctx)
- claim_zero(mlx5_glue->close_device(sh->ctx));
+ i = 0;
+ do {
+ if (sh->tis[i])
+ claim_zero(mlx5_devx_cmd_destroy(sh->tis[i]));
+ } while (++i < (uint32_t)sh->bond.n_port);
+ mlx5_rxtx_uars_release(sh);
mlx5_free(sh);
MLX5_ASSERT(err > 0);
rte_errno = err;
void
mlx5_free_shared_dev_ctx(struct mlx5_dev_ctx_shared *sh)
{
+ int ret;
+ int i = 0;
+
pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
#ifdef RTE_LIBRTE_MLX5_DEBUG
/* Check the object presence in the list. */
MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
if (--sh->refcnt)
goto exit;
- /* Remove from memory callback device list. */
- rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
- LIST_REMOVE(sh, mem_event_cb);
- rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
- /* Release created Memory Regions. */
- mlx5_mr_release_cache(&sh->share_cache);
+ /* Stop watching for mempool events and unregister all mempools. */
+ if (!sh->cdev->config.mr_mempool_reg_en) {
+ ret = rte_mempool_event_callback_unregister
+ (mlx5_dev_ctx_shared_rx_mempool_event_cb, sh);
+ if (ret == 0)
+ rte_mempool_walk
+ (mlx5_dev_ctx_shared_rx_mempool_unregister_cb, sh);
+ }
/* Remove context from the global device list. */
LIST_REMOVE(sh, next);
- /* Release flow workspaces objects on the last device. */
- if (LIST_EMPTY(&mlx5_dev_ctx_list))
+ /* Release resources on the last device removal. */
+ if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
+ mlx5_os_net_cleanup();
mlx5_flow_os_release_workspace();
+ }
pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
+ if (sh->flex_parsers_dv) {
+ mlx5_list_destroy(sh->flex_parsers_dv);
+ sh->flex_parsers_dv = NULL;
+ }
/*
* Ensure there is no async event handler installed.
* Only primary process handles async device events.
mlx5_aso_flow_mtrs_mng_close(sh);
mlx5_flow_ipool_destroy(sh);
mlx5_os_dev_shared_handler_uninstall(sh);
- if (sh->cnt_id_tbl) {
- mlx5_l3t_destroy(sh->cnt_id_tbl);
- sh->cnt_id_tbl = NULL;
- }
- if (sh->tx_uar) {
- mlx5_glue->devx_free_uar(sh->tx_uar);
- sh->tx_uar = NULL;
- }
- if (sh->pd)
- claim_zero(mlx5_os_dealloc_pd(sh->pd));
- if (sh->tis)
- claim_zero(mlx5_devx_cmd_destroy(sh->tis));
+ mlx5_rxtx_uars_release(sh);
+ do {
+ if (sh->tis[i])
+ claim_zero(mlx5_devx_cmd_destroy(sh->tis[i]));
+ } while (++i < sh->bond.n_port);
if (sh->td)
claim_zero(mlx5_devx_cmd_destroy(sh->td));
- if (sh->devx_rx_uar)
- mlx5_glue->devx_free_uar(sh->devx_rx_uar);
- if (sh->ctx)
- claim_zero(mlx5_glue->close_device(sh->ctx));
MLX5_ASSERT(sh->geneve_tlv_option_resource == NULL);
pthread_mutex_destroy(&sh->txpp.mutex);
mlx5_free(sh);
if (!sh->flow_tbls)
return;
mlx5_hlist_destroy(sh->flow_tbls);
+ sh->flow_tbls = NULL;
}
/**
/* Tables are only used in DV and DR modes. */
#if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
struct mlx5_dev_ctx_shared *sh = priv->sh;
- char s[MLX5_HLIST_NAMESIZE];
+ char s[MLX5_NAME_SIZE];
MLX5_ASSERT(sh);
snprintf(s, sizeof(s), "%s_flow_table", priv->sh->ibdev_name);
sh->flow_tbls = mlx5_hlist_create(s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE,
- 0, 0, flow_dv_tbl_create_cb,
+ false, true, sh,
+ flow_dv_tbl_create_cb,
flow_dv_tbl_match_cb,
- flow_dv_tbl_remove_cb);
+ flow_dv_tbl_remove_cb,
+ flow_dv_tbl_clone_cb,
+ flow_dv_tbl_clone_free_cb);
if (!sh->flow_tbls) {
DRV_LOG(ERR, "flow tables with hash creation failed.");
err = ENOMEM;
return err;
}
- sh->flow_tbls->ctx = sh;
#ifndef HAVE_MLX5DV_DR
struct rte_flow_error error;
struct rte_eth_dev *dev = &rte_eth_devices[priv->dev_data->port_id];
* because DV expect to see them even if they cannot be created by
* RDMA-CORE.
*/
- if (!flow_dv_tbl_resource_get(dev, 0, 0, 0, 0, NULL, 0, 1, &error) ||
- !flow_dv_tbl_resource_get(dev, 0, 1, 0, 0, NULL, 0, 1, &error) ||
- !flow_dv_tbl_resource_get(dev, 0, 0, 1, 0, NULL, 0, 1, &error)) {
+ if (!flow_dv_tbl_resource_get(dev, 0, 0, 0, 0,
+ NULL, 0, 1, 0, &error) ||
+ !flow_dv_tbl_resource_get(dev, 0, 1, 0, 0,
+ NULL, 0, 1, 0, &error) ||
+ !flow_dv_tbl_resource_get(dev, 0, 0, 1, 0,
+ NULL, 0, 1, 0, &error)) {
err = ENOMEM;
goto error;
}
struct rte_eth_udp_tunnel *udp_tunnel)
{
MLX5_ASSERT(udp_tunnel != NULL);
- if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN &&
+ if (udp_tunnel->prot_type == RTE_ETH_TUNNEL_TYPE_VXLAN &&
udp_tunnel->udp_port == 4789)
return 0;
- if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN_GPE &&
+ if (udp_tunnel->prot_type == RTE_ETH_TUNNEL_TYPE_VXLAN_GPE &&
udp_tunnel->udp_port == 4790)
return 0;
return -ENOTSUP;
struct mlx5_proc_priv *ppriv;
size_t ppriv_size;
+ mlx5_proc_priv_uninit(dev);
/*
* UAR register table follows the process private structure. BlueFlame
* registers for Tx queues are stored in the table.
*/
- ppriv_size =
- sizeof(struct mlx5_proc_priv) + priv->txqs_n * sizeof(void *);
+ ppriv_size = sizeof(struct mlx5_proc_priv) +
+ priv->txqs_n * sizeof(struct mlx5_uar_data);
ppriv = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, ppriv_size,
RTE_CACHE_LINE_SIZE, dev->device->numa_node);
if (!ppriv) {
}
ppriv->uar_table_sz = priv->txqs_n;
dev->process_private = ppriv;
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ priv->sh->pppriv = ppriv;
return 0;
}
return 0;
DRV_LOG(DEBUG, "port %u closing device \"%s\"",
dev->data->port_id,
- ((priv->sh->ctx != NULL) ?
- mlx5_os_get_ctx_device_name(priv->sh->ctx) : ""));
+ ((priv->sh->cdev->ctx != NULL) ?
+ mlx5_os_get_ctx_device_name(priv->sh->cdev->ctx) : ""));
/*
* If default mreg copy action is removed at the stop stage,
* the search will return none and nothing will be done anymore.
* If all the flows are already flushed in the device stop stage,
* then this will return directly without any action.
*/
- mlx5_flow_list_flush(dev, &priv->flows, true);
+ mlx5_flow_list_flush(dev, MLX5_FLOW_TYPE_GEN, true);
mlx5_action_handle_flush(dev);
mlx5_flow_meter_flush(dev, NULL);
/* Prevent crashes when queues are still in use. */
- dev->rx_pkt_burst = removed_rx_burst;
- dev->tx_pkt_burst = removed_tx_burst;
+ dev->rx_pkt_burst = rte_eth_pkt_burst_dummy;
+ dev->tx_pkt_burst = rte_eth_pkt_burst_dummy;
rte_wmb();
/* Disable datapath on secondary process. */
mlx5_mp_os_req_stop_rxtx(dev);
/* Free the eCPRI flex parser resource. */
mlx5_flex_parser_ecpri_release(dev);
- if (priv->rxqs != NULL) {
+ mlx5_flex_item_port_cleanup(dev);
+ if (priv->rxq_privs != NULL) {
/* XXX race condition if mlx5_rx_burst() is still running. */
rte_delay_us_sleep(1000);
for (i = 0; (i != priv->rxqs_n); ++i)
mlx5_rxq_release(dev, i);
priv->rxqs_n = 0;
- priv->rxqs = NULL;
+ mlx5_free(priv->rxq_privs);
+ priv->rxq_privs = NULL;
}
if (priv->txqs != NULL) {
/* XXX race condition if mlx5_tx_burst() is still running. */
if (priv->mreg_cp_tbl)
mlx5_hlist_destroy(priv->mreg_cp_tbl);
mlx5_mprq_free_mp(dev);
+ if (priv->sh->ct_mng)
+ mlx5_flow_aso_ct_mng_close(priv->sh);
mlx5_os_free_shared_dr(priv);
if (priv->rss_conf.rss_key != NULL)
mlx5_free(priv->rss_conf.rss_key);
if (ret)
DRV_LOG(WARNING, "port %u some flows still remain",
dev->data->port_id);
- mlx5_cache_list_destroy(&priv->hrxqs);
+ if (priv->hrxqs)
+ mlx5_list_destroy(priv->hrxqs);
/*
* Free the shared context in last turn, because the cleanup
* routines above may use some shared fields, like
- * mlx5_os_mac_addr_flush() uses ibdev_path for retrieveing
+ * mlx5_os_mac_addr_flush() uses ibdev_path for retrieving
* ifindex if Netlink fails.
*/
mlx5_free_shared_dev_ctx(priv->sh);
unsigned int c = 0;
uint16_t port_id;
- MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+ MLX5_ETH_FOREACH_DEV(port_id, dev->device) {
struct mlx5_priv *opriv =
rte_eth_devices[port_id].data->dev_private;
.hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
.hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
.hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
+ .get_monitor_addr = mlx5_get_monitor_addr,
};
/* Available operations from secondary process. */
.xstats_get_names = mlx5_xstats_get_names,
.fw_version_get = mlx5_fw_version_get,
.dev_infos_get = mlx5_dev_infos_get,
+ .representor_info_get = mlx5_representor_info_get,
.read_clock = mlx5_txpp_read_clock,
.rx_queue_start = mlx5_rx_queue_start,
.rx_queue_stop = mlx5_rx_queue_stop,
.xstats_get_names = mlx5_xstats_get_names,
.fw_version_get = mlx5_fw_version_get,
.dev_infos_get = mlx5_dev_infos_get,
+ .representor_info_get = mlx5_representor_info_get,
.read_clock = mlx5_txpp_read_clock,
.dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
.vlan_filter_set = mlx5_vlan_filter_set,
.hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
.hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
.hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
+ .get_monitor_addr = mlx5_get_monitor_addr,
};
/**
signed long tmp;
/* No-op, port representors are processed in mlx5_dev_spawn(). */
- if (!strcmp(MLX5_REPRESENTOR, key))
+ if (!strcmp(MLX5_DRIVER_KEY, key) || !strcmp(MLX5_REPRESENTOR, key) ||
+ !strcmp(MLX5_SYS_MEM_EN, key) || !strcmp(MLX5_TX_DB_NC, key) ||
+ !strcmp(MLX5_MR_MEMPOOL_REG_EN, key) ||
+ !strcmp(MLX5_MR_EXT_MEMSEG_EN, key))
return 0;
errno = 0;
tmp = strtol(val, NULL, 0);
} else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
config->mprq.enabled = !!tmp;
} else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
- config->mprq.stride_num_n = tmp;
+ config->mprq.log_stride_num = tmp;
} else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_SIZE, key) == 0) {
- config->mprq.stride_size_n = tmp;
+ config->mprq.log_stride_size = tmp;
} else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
config->mprq.max_memcpy_len = tmp;
} else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
config->mps = !!tmp;
- } else if (strcmp(MLX5_TX_DB_NC, key) == 0) {
- if (tmp != MLX5_TXDB_CACHED &&
- tmp != MLX5_TXDB_NCACHED &&
- tmp != MLX5_TXDB_HEURISTIC) {
- DRV_LOG(ERR, "invalid Tx doorbell "
- "mapping parameter");
- rte_errno = EINVAL;
- return -rte_errno;
- }
- config->dbnc = tmp;
} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
config->dv_miss_info = 1;
} else if (strcmp(MLX5_LACP_BY_USER, key) == 0) {
config->lacp_by_user = !!tmp;
- } else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
- config->mr_ext_memseg_en = !!tmp;
} else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
config->max_dump_files_num = tmp;
} else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
config->lro.timeout = tmp;
- } else if (strcmp(MLX5_CLASS_ARG_NAME, key) == 0) {
+ } else if (strcmp(RTE_DEVARGS_KEY_CLASS, key) == 0) {
DRV_LOG(DEBUG, "class argument is %s.", val);
} else if (strcmp(MLX5_HP_BUF_SIZE, key) == 0) {
config->log_hp_size = tmp;
if (tmp != MLX5_RCM_NONE &&
tmp != MLX5_RCM_LIGHT &&
tmp != MLX5_RCM_AGGR) {
- DRV_LOG(ERR, "Unrecognize %s: \"%s\"", key, val);
+ DRV_LOG(ERR, "Unrecognized %s: \"%s\"", key, val);
rte_errno = EINVAL;
return -rte_errno;
}
config->reclaim_mode = tmp;
- } else if (strcmp(MLX5_SYS_MEM_EN, key) == 0) {
- config->sys_mem_en = !!tmp;
} else if (strcmp(MLX5_DECAP_EN, key) == 0) {
config->decap_en = !!tmp;
+ } else if (strcmp(MLX5_ALLOW_DUPLICATE_PATTERN, key) == 0) {
+ config->allow_duplicate_pattern = !!tmp;
+ } else if (strcmp(MLX5_DELAY_DROP, key) == 0) {
+ config->std_delay_drop = !!(tmp & MLX5_DELAY_DROP_STANDARD);
+ config->hp_delay_drop = !!(tmp & MLX5_DELAY_DROP_HAIRPIN);
} else {
- DRV_LOG(WARNING, "%s: unknown parameter", key);
- rte_errno = EINVAL;
- return -rte_errno;
+ DRV_LOG(WARNING,
+ "%s: unknown parameter, maybe it's for another class.",
+ key);
}
return 0;
}
int
mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
{
- const char **params = (const char *[]){
- MLX5_RXQ_CQE_COMP_EN,
- MLX5_RXQ_PKT_PAD_EN,
- MLX5_RX_MPRQ_EN,
- MLX5_RX_MPRQ_LOG_STRIDE_NUM,
- MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
- MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
- MLX5_RXQS_MIN_MPRQ,
- MLX5_TXQ_INLINE,
- MLX5_TXQ_INLINE_MIN,
- MLX5_TXQ_INLINE_MAX,
- MLX5_TXQ_INLINE_MPW,
- MLX5_TXQS_MIN_INLINE,
- MLX5_TXQS_MAX_VEC,
- MLX5_TXQ_MPW_EN,
- MLX5_TXQ_MPW_HDR_DSEG_EN,
- MLX5_TXQ_MAX_INLINE_LEN,
- MLX5_TX_DB_NC,
- MLX5_TX_PP,
- MLX5_TX_SKEW,
- MLX5_TX_VEC_EN,
- MLX5_RX_VEC_EN,
- MLX5_L3_VXLAN_EN,
- MLX5_VF_NL_EN,
- MLX5_DV_ESW_EN,
- MLX5_DV_FLOW_EN,
- MLX5_DV_XMETA_EN,
- MLX5_LACP_BY_USER,
- MLX5_MR_EXT_MEMSEG_EN,
- MLX5_REPRESENTOR,
- MLX5_MAX_DUMP_FILES_NUM,
- MLX5_LRO_TIMEOUT_USEC,
- MLX5_CLASS_ARG_NAME,
- MLX5_HP_BUF_SIZE,
- MLX5_RECLAIM_MEM,
- MLX5_SYS_MEM_EN,
- MLX5_DECAP_EN,
- NULL,
- };
struct rte_kvargs *kvlist;
int ret = 0;
- int i;
if (devargs == NULL)
return 0;
/* Following UGLY cast is done to pass checkpatch. */
- kvlist = rte_kvargs_parse(devargs->args, params);
+ kvlist = rte_kvargs_parse(devargs->args, NULL);
if (kvlist == NULL) {
rte_errno = EINVAL;
return -rte_errno;
}
/* Process parameters. */
- for (i = 0; (params[i] != NULL); ++i) {
- if (rte_kvargs_count(kvlist, params[i])) {
- ret = rte_kvargs_process(kvlist, params[i],
- mlx5_args_check, config);
- if (ret) {
- rte_errno = EINVAL;
- rte_kvargs_free(kvlist);
- return -rte_errno;
- }
- }
+ ret = rte_kvargs_process(kvlist, NULL, mlx5_args_check, config);
+ if (ret) {
+ rte_errno = EINVAL;
+ ret = -rte_errno;
}
rte_kvargs_free(kvlist);
- return 0;
+ return ret;
}
/**
{
if (config->txq_inline_min != MLX5_ARG_UNSET) {
/* Application defines size of inlined data explicitly. */
- switch (spawn->pci_dev->id.device_id) {
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
- if (config->txq_inline_min <
- (int)MLX5_INLINE_HSIZE_L2) {
- DRV_LOG(DEBUG,
- "txq_inline_mix aligned to minimal"
- " ConnectX-4 required value %d",
- (int)MLX5_INLINE_HSIZE_L2);
- config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ if (spawn->pci_dev != NULL) {
+ switch (spawn->pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ if (config->txq_inline_min <
+ (int)MLX5_INLINE_HSIZE_L2) {
+ DRV_LOG(DEBUG,
+ "txq_inline_mix aligned to minimal ConnectX-4 required value %d",
+ (int)MLX5_INLINE_HSIZE_L2);
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L2;
+ }
+ break;
}
- break;
}
goto exit;
}
}
}
}
+ if (spawn->pci_dev == NULL) {
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ goto exit;
+ }
/*
* We get here if we are unable to deduce
* inline data size with DevX. Try PCI ID
break;
}
if (sh->dv_mark_mask && sh->dv_mark_mask != mark)
- DRV_LOG(WARNING, "metadata MARK mask mismatche %08X:%08X",
+ DRV_LOG(WARNING, "metadata MARK mask mismatch %08X:%08X",
sh->dv_mark_mask, mark);
else
sh->dv_mark_mask = mark;
if (sh->dv_meta_mask && sh->dv_meta_mask != meta)
- DRV_LOG(WARNING, "metadata META mask mismatche %08X:%08X",
+ DRV_LOG(WARNING, "metadata META mask mismatch %08X:%08X",
sh->dv_meta_mask, meta);
else
sh->dv_meta_mask = meta;
if (sh->dv_regc0_mask && sh->dv_regc0_mask != reg_c0)
- DRV_LOG(WARNING, "metadata reg_c0 mask mismatche %08X:%08X",
+ DRV_LOG(WARNING, "metadata reg_c0 mask mismatch %08X:%08X",
sh->dv_meta_mask, reg_c0);
else
sh->dv_regc0_mask = reg_c0;
*/
int
mlx5_dev_check_sibling_config(struct mlx5_priv *priv,
- struct mlx5_dev_config *config)
+ struct mlx5_dev_config *config,
+ struct rte_device *dpdk_dev)
{
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_dev_config *sh_conf = NULL;
if (sh->refcnt == 1)
return 0;
/* Find the device with shared context. */
- MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+ MLX5_ETH_FOREACH_DEV(port_id, dpdk_dev) {
struct mlx5_priv *opriv =
rte_eth_devices[port_id].data->dev_private;
*
* @param[in] port_id
* port_id to start looking for device.
- * @param[in] pci_dev
- * Pointer to the hint PCI device. When device is being probed
+ * @param[in] odev
+ * Pointer to the hint device. When device is being probed
* the its siblings (master and preceding representors might
* not have assigned driver yet (because the mlx5_os_pci_probe()
- * is not completed yet, for this case match on hint PCI
+ * is not completed yet, for this case match on hint
* device may be used to detect sibling device.
*
* @return
* port_id of found device, RTE_MAX_ETHPORT if not found.
*/
uint16_t
-mlx5_eth_find_next(uint16_t port_id, struct rte_pci_device *pci_dev)
+mlx5_eth_find_next(uint16_t port_id, struct rte_device *odev)
{
while (port_id < RTE_MAX_ETHPORTS) {
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
if (dev->state != RTE_ETH_DEV_UNUSED &&
dev->device &&
- (dev->device == &pci_dev->device ||
+ (dev->device == odev ||
(dev->device->driver &&
dev->device->driver->name &&
- !strcmp(dev->device->driver->name, MLX5_PCI_DRIVER_NAME))))
+ ((strcmp(dev->device->driver->name,
+ MLX5_PCI_DRIVER_NAME) == 0) ||
+ (strcmp(dev->device->driver->name,
+ MLX5_AUXILIARY_DRIVER_NAME) == 0)))))
break;
port_id++;
}
}
/**
- * DPDK callback to remove a PCI device.
+ * Callback to remove a device.
*
- * This function removes all Ethernet devices belong to a given PCI device.
+ * This function removes all Ethernet devices belong to a given device.
*
- * @param[in] pci_dev
- * Pointer to the PCI device.
+ * @param[in] cdev
+ * Pointer to the generic device.
*
* @return
* 0 on success, the function cannot fail.
*/
-static int
-mlx5_pci_remove(struct rte_pci_device *pci_dev)
+int
+mlx5_net_remove(struct mlx5_common_device *cdev)
{
uint16_t port_id;
int ret = 0;
- RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device) {
+ RTE_ETH_FOREACH_DEV_OF(port_id, cdev->dev) {
/*
* mlx5_dev_close() is not registered to secondary process,
* call the close function explicitly for secondary process.
}
};
-static struct mlx5_pci_driver mlx5_driver = {
- .driver_class = MLX5_CLASS_NET,
- .pci_driver = {
- .driver = {
- .name = MLX5_PCI_DRIVER_NAME,
- },
- .id_table = mlx5_pci_id_map,
- .probe = mlx5_os_pci_probe,
- .remove = mlx5_pci_remove,
- .dma_map = mlx5_dma_map,
- .dma_unmap = mlx5_dma_unmap,
- .drv_flags = PCI_DRV_FLAGS,
- },
+static struct mlx5_class_driver mlx5_net_driver = {
+ .drv_class = MLX5_CLASS_ETH,
+ .name = RTE_STR(MLX5_ETH_DRIVER_NAME),
+ .id_table = mlx5_pci_id_map,
+ .probe = mlx5_os_net_probe,
+ .remove = mlx5_net_remove,
+ .probe_again = 1,
+ .intr_lsc = 1,
+ .intr_rmv = 1,
};
/* Initialize driver log type. */
-RTE_LOG_REGISTER(mlx5_logtype, pmd.net.mlx5, NOTICE)
+RTE_LOG_REGISTER_DEFAULT(mlx5_logtype, NOTICE)
/**
* Driver initialization routine.
mlx5_set_cksum_table();
mlx5_set_swp_types_table();
if (mlx5_glue)
- mlx5_pci_driver_register(&mlx5_driver);
+ mlx5_class_driver_register(&mlx5_net_driver);
}
-RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
-RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map);
-RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");
+RTE_PMD_EXPORT_NAME(MLX5_ETH_DRIVER_NAME, __COUNTER__);
+RTE_PMD_REGISTER_PCI_TABLE(MLX5_ETH_DRIVER_NAME, mlx5_pci_id_map);
+RTE_PMD_REGISTER_KMOD_DEP(MLX5_ETH_DRIVER_NAME, "* ib_uverbs & mlx5_core & mlx5_ib");