#include <stdint.h>
#include <stdlib.h>
#include <errno.h>
-#include <net/if.h>
-#include <sys/mman.h>
-#include <linux/rtnetlink.h>
-
-/* Verbs header. */
-/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
-#ifdef PEDANTIC
-#pragma GCC diagnostic ignored "-Wpedantic"
-#endif
-#include <infiniband/verbs.h>
-#ifdef PEDANTIC
-#pragma GCC diagnostic error "-Wpedantic"
-#endif
#include <rte_malloc.h>
-#include <rte_ethdev_driver.h>
-#include <rte_ethdev_pci.h>
+#include <ethdev_driver.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_common.h>
#include <rte_rwlock.h>
#include <rte_spinlock.h>
#include <rte_string_fns.h>
+#include <rte_eal_paging.h>
#include <rte_alarm.h>
+#include <rte_cycles.h>
#include <mlx5_glue.h>
#include <mlx5_devx_cmds.h>
#include <mlx5_common.h>
#include <mlx5_common_os.h>
#include <mlx5_common_mp.h>
+#include <mlx5_malloc.h>
#include "mlx5_defs.h"
#include "mlx5.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
+#include "mlx5_rx.h"
+#include "mlx5_tx.h"
#include "mlx5_autoconf.h"
-#include "mlx5_mr.h"
#include "mlx5_flow.h"
+#include "mlx5_flow_os.h"
#include "rte_pmd_mlx5.h"
+#define MLX5_ETH_DRIVER_NAME mlx5_eth
+
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
-/* Device parameter to enable RX completion entry padding to 128B. */
-#define MLX5_RXQ_CQE_PAD_EN "rxq_cqe_pad_en"
-
/* Device parameter to enable padding Rx packet to cacheline size. */
#define MLX5_RXQ_PKT_PAD_EN "rxq_pkt_pad_en"
/* Device parameter to enable multi-packet send WQEs. */
#define MLX5_TXQ_MPW_EN "txq_mpw_en"
-/*
- * Device parameter to force doorbell register mapping
- * to non-cahed region eliminating the extra write memory barrier.
- */
-#define MLX5_TX_DB_NC "tx_db_nc"
-
/*
* Device parameter to include 2 dsegs in the title WQEBB.
* Deprecated, ignored.
/* Activate Netlink support in VF mode. */
#define MLX5_VF_NL_EN "vf_nl_en"
-/* Enable extending memsegs when creating a MR. */
-#define MLX5_MR_EXT_MEMSEG_EN "mr_ext_memseg_en"
-
/* Select port representors to instantiate. */
#define MLX5_REPRESENTOR "representor"
/* Flow memory reclaim mode. */
#define MLX5_RECLAIM_MEM "reclaim_mem_mode"
-static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
+/* Decap will be used or not. */
+#define MLX5_DECAP_EN "decap_en"
+
+/* Device parameter to configure allow or prevent duplicate rules pattern. */
+#define MLX5_ALLOW_DUPLICATE_PATTERN "allow_duplicate_pattern"
+
+/* Device parameter to configure the delay drop when creating Rxqs. */
+#define MLX5_DELAY_DROP "delay_drop"
/* Shared memory between primary and secondary processes. */
struct mlx5_shared_data *mlx5_shared_data;
-/* Spinlock for mlx5_shared_data allocation. */
-static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
-
-/* Process local data for secondary processes. */
-static struct mlx5_local_data mlx5_local_data;
+/** Driver-specific log messages type. */
+int mlx5_logtype;
static LIST_HEAD(, mlx5_dev_ctx_shared) mlx5_dev_ctx_list =
LIST_HEAD_INITIALIZER();
-static pthread_mutex_t mlx5_dev_ctx_list_mutex = PTHREAD_MUTEX_INITIALIZER;
-
+static pthread_mutex_t mlx5_dev_ctx_list_mutex;
static const struct mlx5_indexed_pool_config mlx5_ipool_cfg[] = {
-#ifdef HAVE_IBV_FLOW_DV_SUPPORT
- {
+#if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
+ [MLX5_IPOOL_DECAP_ENCAP] = {
.size = sizeof(struct mlx5_flow_dv_encap_decap_resource),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
+ .need_lock = 1,
.release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_encap_decap_ipool",
},
- {
+ [MLX5_IPOOL_PUSH_VLAN] = {
.size = sizeof(struct mlx5_flow_dv_push_vlan_action_resource),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
+ .need_lock = 1,
.release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_push_vlan_ipool",
},
- {
+ [MLX5_IPOOL_TAG] = {
.size = sizeof(struct mlx5_flow_dv_tag_resource),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
- .release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .need_lock = 1,
+ .release_mem_en = 0,
+ .per_core_cache = (1 << 16),
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_tag_ipool",
},
- {
+ [MLX5_IPOOL_PORT_ID] = {
.size = sizeof(struct mlx5_flow_dv_port_id_action_resource),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
+ .need_lock = 1,
.release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_port_id_ipool",
},
- {
+ [MLX5_IPOOL_JUMP] = {
.size = sizeof(struct mlx5_flow_tbl_data_entry),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
+ .need_lock = 1,
.release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_jump_ipool",
},
-#endif
- {
- .size = sizeof(struct mlx5_flow_meter),
+ [MLX5_IPOOL_SAMPLE] = {
+ .size = sizeof(struct mlx5_flow_dv_sample_resource),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
+ .need_lock = 1,
.release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
+ .type = "mlx5_sample_ipool",
+ },
+ [MLX5_IPOOL_DEST_ARRAY] = {
+ .size = sizeof(struct mlx5_flow_dv_dest_array_resource),
+ .trunk_size = 64,
+ .grow_trunk = 3,
+ .grow_shift = 2,
+ .need_lock = 1,
+ .release_mem_en = 1,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
+ .type = "mlx5_dest_array_ipool",
+ },
+ [MLX5_IPOOL_TUNNEL_ID] = {
+ .size = sizeof(struct mlx5_flow_tunnel),
+ .trunk_size = MLX5_MAX_TUNNELS,
+ .need_lock = 1,
+ .release_mem_en = 1,
+ .type = "mlx5_tunnel_offload",
+ },
+ [MLX5_IPOOL_TNL_TBL_ID] = {
+ .size = 0,
+ .need_lock = 1,
+ .type = "mlx5_flow_tnl_tbl_ipool",
+ },
+#endif
+ [MLX5_IPOOL_MTR] = {
+ /**
+ * The ipool index should grow continually from small to big,
+ * for meter idx, so not set grow_trunk to avoid meter index
+ * not jump continually.
+ */
+ .size = sizeof(struct mlx5_legacy_flow_meter),
+ .trunk_size = 64,
+ .need_lock = 1,
+ .release_mem_en = 1,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_meter_ipool",
},
- {
+ [MLX5_IPOOL_MCP] = {
.size = sizeof(struct mlx5_flow_mreg_copy_resource),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
+ .need_lock = 1,
.release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_mcp_ipool",
},
- {
+ [MLX5_IPOOL_HRXQ] = {
.size = (sizeof(struct mlx5_hrxq) + MLX5_RSS_HASH_KEY_LEN),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
+ .need_lock = 1,
.release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_hrxq_ipool",
},
- {
+ [MLX5_IPOOL_MLX5_FLOW] = {
/*
* MLX5_IPOOL_MLX5_FLOW size varies for DV and VERBS flows.
* It set in run time according to PCI function configuration.
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
- .need_lock = 0,
- .release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .need_lock = 1,
+ .release_mem_en = 0,
+ .per_core_cache = 1 << 19,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "mlx5_flow_handle_ipool",
},
- {
+ [MLX5_IPOOL_RTE_FLOW] = {
.size = sizeof(struct rte_flow),
.trunk_size = 4096,
.need_lock = 1,
.release_mem_en = 1,
- .malloc = rte_malloc_socket,
- .free = rte_free,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
.type = "rte_flow_ipool",
},
+ [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID] = {
+ .size = 0,
+ .need_lock = 1,
+ .type = "mlx5_flow_rss_id_ipool",
+ },
+ [MLX5_IPOOL_RSS_SHARED_ACTIONS] = {
+ .size = sizeof(struct mlx5_shared_action_rss),
+ .trunk_size = 64,
+ .grow_trunk = 3,
+ .grow_shift = 2,
+ .need_lock = 1,
+ .release_mem_en = 1,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
+ .type = "mlx5_shared_action_rss",
+ },
+ [MLX5_IPOOL_MTR_POLICY] = {
+ /**
+ * The ipool index should grow continually from small to big,
+ * for policy idx, so not set grow_trunk to avoid policy index
+ * not jump continually.
+ */
+ .size = sizeof(struct mlx5_flow_meter_sub_policy),
+ .trunk_size = 64,
+ .need_lock = 1,
+ .release_mem_en = 1,
+ .malloc = mlx5_malloc,
+ .free = mlx5_free,
+ .type = "mlx5_meter_policy_ipool",
+ },
};
-
#define MLX5_FLOW_MIN_ID_POOL_SIZE 512
#define MLX5_ID_GENERATION_ARRAY_FACTOR 16
-#define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 4096
+#define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 1024
/**
- * Allocate ID pool structure.
+ * Decide whether representor ID is a HPF(host PF) port on BF2.
*
- * @param[in] max_id
- * The maximum id can be allocated from the pool.
+ * @param dev
+ * Pointer to Ethernet device structure.
*
* @return
- * Pointer to pool object, NULL value otherwise.
+ * Non-zero if HPF, otherwise 0.
*/
-struct mlx5_flow_id_pool *
-mlx5_flow_id_pool_alloc(uint32_t max_id)
+bool
+mlx5_is_hpf(struct rte_eth_dev *dev)
{
- struct mlx5_flow_id_pool *pool;
- void *mem;
-
- pool = rte_zmalloc("id pool allocation", sizeof(*pool),
- RTE_CACHE_LINE_SIZE);
- if (!pool) {
- DRV_LOG(ERR, "can't allocate id pool");
- rte_errno = ENOMEM;
- return NULL;
- }
- mem = rte_zmalloc("", MLX5_FLOW_MIN_ID_POOL_SIZE * sizeof(uint32_t),
- RTE_CACHE_LINE_SIZE);
- if (!mem) {
- DRV_LOG(ERR, "can't allocate mem for id pool");
- rte_errno = ENOMEM;
- goto error;
- }
- pool->free_arr = mem;
- pool->curr = pool->free_arr;
- pool->last = pool->free_arr + MLX5_FLOW_MIN_ID_POOL_SIZE;
- pool->base_index = 0;
- pool->max_id = max_id;
- return pool;
-error:
- rte_free(pool);
- return NULL;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint16_t repr = MLX5_REPRESENTOR_REPR(priv->representor_id);
+ int type = MLX5_REPRESENTOR_TYPE(priv->representor_id);
+
+ return priv->representor != 0 && type == RTE_ETH_REPRESENTOR_VF &&
+ MLX5_REPRESENTOR_REPR(-1) == repr;
}
/**
- * Release ID pool structure.
+ * Decide whether representor ID is a SF port representor.
*
- * @param[in] pool
- * Pointer to flow id pool object to free.
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * Non-zero if HPF, otherwise 0.
*/
-void
-mlx5_flow_id_pool_release(struct mlx5_flow_id_pool *pool)
+bool
+mlx5_is_sf_repr(struct rte_eth_dev *dev)
{
- rte_free(pool->free_arr);
- rte_free(pool);
+ struct mlx5_priv *priv = dev->data->dev_private;
+ int type = MLX5_REPRESENTOR_TYPE(priv->representor_id);
+
+ return priv->representor != 0 && type == RTE_ETH_REPRESENTOR_SF;
}
/**
- * Generate ID.
+ * Initialize the ASO aging management structure.
*
- * @param[in] pool
- * Pointer to flow id pool.
- * @param[out] id
- * The generated ID.
+ * @param[in] sh
+ * Pointer to mlx5_dev_ctx_shared object to free
*
* @return
- * 0 on success, error value otherwise.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-uint32_t
-mlx5_flow_id_get(struct mlx5_flow_id_pool *pool, uint32_t *id)
+int
+mlx5_flow_aso_age_mng_init(struct mlx5_dev_ctx_shared *sh)
{
- if (pool->curr == pool->free_arr) {
- if (pool->base_index == pool->max_id) {
- rte_errno = ENOMEM;
- DRV_LOG(ERR, "no free id");
- return -rte_errno;
- }
- *id = ++pool->base_index;
+ int err;
+
+ if (sh->aso_age_mng)
return 0;
+ sh->aso_age_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->aso_age_mng),
+ RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
+ if (!sh->aso_age_mng) {
+ DRV_LOG(ERR, "aso_age_mng allocation was failed.");
+ rte_errno = ENOMEM;
+ return -ENOMEM;
+ }
+ err = mlx5_aso_queue_init(sh, ASO_OPC_MOD_FLOW_HIT);
+ if (err) {
+ mlx5_free(sh->aso_age_mng);
+ return -1;
}
- *id = *(--pool->curr);
+ rte_rwlock_init(&sh->aso_age_mng->resize_rwl);
+ rte_spinlock_init(&sh->aso_age_mng->free_sl);
+ LIST_INIT(&sh->aso_age_mng->free);
return 0;
}
/**
- * Release ID.
- *
- * @param[in] pool
- * Pointer to flow id pool.
- * @param[out] id
- * The generated ID.
+ * Close and release all the resources of the ASO aging management structure.
*
- * @return
- * 0 on success, error value otherwise.
+ * @param[in] sh
+ * Pointer to mlx5_dev_ctx_shared object to free.
*/
-uint32_t
-mlx5_flow_id_release(struct mlx5_flow_id_pool *pool, uint32_t id)
+static void
+mlx5_flow_aso_age_mng_close(struct mlx5_dev_ctx_shared *sh)
{
- uint32_t size;
- uint32_t size2;
- void *mem;
-
- if (pool->curr == pool->last) {
- size = pool->curr - pool->free_arr;
- size2 = size * MLX5_ID_GENERATION_ARRAY_FACTOR;
- MLX5_ASSERT(size2 > size);
- mem = rte_malloc("", size2 * sizeof(uint32_t), 0);
- if (!mem) {
- DRV_LOG(ERR, "can't allocate mem for id pool");
- rte_errno = ENOMEM;
- return -rte_errno;
+ int i, j;
+
+ mlx5_aso_flow_hit_queue_poll_stop(sh);
+ mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_FLOW_HIT);
+ if (sh->aso_age_mng->pools) {
+ struct mlx5_aso_age_pool *pool;
+
+ for (i = 0; i < sh->aso_age_mng->next; ++i) {
+ pool = sh->aso_age_mng->pools[i];
+ claim_zero(mlx5_devx_cmd_destroy
+ (pool->flow_hit_aso_obj));
+ for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j)
+ if (pool->actions[j].dr_action)
+ claim_zero
+ (mlx5_flow_os_destroy_flow_action
+ (pool->actions[j].dr_action));
+ mlx5_free(pool);
}
- memcpy(mem, pool->free_arr, size * sizeof(uint32_t));
- rte_free(pool->free_arr);
- pool->free_arr = mem;
- pool->curr = pool->free_arr + size;
- pool->last = pool->free_arr + size2;
- }
- *pool->curr = id;
- pool->curr++;
- return 0;
+ mlx5_free(sh->aso_age_mng->pools);
+ }
+ mlx5_free(sh->aso_age_mng);
}
/**
age_info = &sh->port[i].age_info;
age_info->flags = 0;
TAILQ_INIT(&age_info->aged_counters);
+ LIST_INIT(&age_info->aged_aso);
rte_spinlock_init(&age_info->aged_sl);
MLX5_AGE_SET(age_info, MLX5_AGE_TRIGGER);
}
}
+/**
+ * DV flow counter mode detect and config.
+ *
+ * @param dev
+ * Pointer to rte_eth_dev structure.
+ *
+ */
+void
+mlx5_flow_counter_mode_config(struct rte_eth_dev *dev __rte_unused)
+{
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ struct mlx5_hca_attr *hca_attr = &sh->cdev->config.hca_attr;
+ bool fallback;
+
+#ifndef HAVE_IBV_DEVX_ASYNC
+ fallback = true;
+#else
+ fallback = false;
+ if (!sh->cdev->config.devx || !sh->config.dv_flow_en ||
+ !hca_attr->flow_counters_dump ||
+ !(hca_attr->flow_counter_bulk_alloc_bitmap & 0x4) ||
+ (mlx5_flow_dv_discover_counter_offset_support(dev) == -ENOTSUP))
+ fallback = true;
+#endif
+ if (fallback)
+ DRV_LOG(INFO, "Use fall-back DV counter management. Flow "
+ "counter dump:%d, bulk_alloc_bitmap:0x%hhx.",
+ hca_attr->flow_counters_dump,
+ hca_attr->flow_counter_bulk_alloc_bitmap);
+ /* Initialize fallback mode only on the port initializes sh. */
+ if (sh->refcnt == 1)
+ sh->cmng.counter_fallback = fallback;
+ else if (fallback != sh->cmng.counter_fallback)
+ DRV_LOG(WARNING, "Port %d in sh has different fallback mode "
+ "with others:%d.", PORT_ID(priv), fallback);
+#endif
+}
+
/**
* Initialize the counters management structure.
*
memset(&sh->cmng, 0, sizeof(sh->cmng));
TAILQ_INIT(&sh->cmng.flow_counters);
- for (i = 0; i < MLX5_CCONT_TYPE_MAX; ++i) {
- sh->cmng.ccont[i].min_id = MLX5_CNT_BATCH_OFFSET;
- sh->cmng.ccont[i].max_id = -1;
- sh->cmng.ccont[i].last_pool_idx = POOL_IDX_INVALID;
- TAILQ_INIT(&sh->cmng.ccont[i].pool_list);
- rte_spinlock_init(&sh->cmng.ccont[i].resize_sl);
- TAILQ_INIT(&sh->cmng.ccont[i].counters);
- rte_spinlock_init(&sh->cmng.ccont[i].csl);
+ sh->cmng.min_id = MLX5_CNT_BATCH_OFFSET;
+ sh->cmng.max_id = -1;
+ sh->cmng.last_pool_idx = POOL_IDX_INVALID;
+ rte_spinlock_init(&sh->cmng.pool_update_sl);
+ for (i = 0; i < MLX5_COUNTER_TYPE_MAX; i++) {
+ TAILQ_INIT(&sh->cmng.counters[i]);
+ rte_spinlock_init(&sh->cmng.csl[i]);
}
}
uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
LIST_REMOVE(mng, next);
- claim_zero(mlx5_devx_cmd_destroy(mng->dm));
- claim_zero(mlx5_glue->devx_umem_dereg(mng->umem));
- rte_free(mem);
+ mlx5_os_wrapped_mkey_destroy(&mng->wm);
+ mlx5_free(mem);
}
/**
mlx5_flow_counters_mng_close(struct mlx5_dev_ctx_shared *sh)
{
struct mlx5_counter_stats_mem_mng *mng;
- int i;
- int j;
+ int i, j;
int retries = 1024;
rte_errno = 0;
break;
rte_pause();
}
- for (i = 0; i < MLX5_CCONT_TYPE_MAX; ++i) {
+
+ if (sh->cmng.pools) {
struct mlx5_flow_counter_pool *pool;
- uint32_t batch = !!(i > 1);
+ uint16_t n_valid = sh->cmng.n_valid;
+ bool fallback = sh->cmng.counter_fallback;
- if (!sh->cmng.ccont[i].pools)
- continue;
- pool = TAILQ_FIRST(&sh->cmng.ccont[i].pool_list);
- while (pool) {
- if (batch && pool->min_dcs)
+ for (i = 0; i < n_valid; ++i) {
+ pool = sh->cmng.pools[i];
+ if (!fallback && pool->min_dcs)
claim_zero(mlx5_devx_cmd_destroy
(pool->min_dcs));
for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j) {
- if (MLX5_POOL_GET_CNT(pool, j)->action)
+ struct mlx5_flow_counter *cnt =
+ MLX5_POOL_GET_CNT(pool, j);
+
+ if (cnt->action)
claim_zero
- (mlx5_glue->destroy_flow_action
- (MLX5_POOL_GET_CNT
- (pool, j)->action));
- if (!batch && MLX5_GET_POOL_CNT_EXT
- (pool, j)->dcs)
+ (mlx5_flow_os_destroy_flow_action
+ (cnt->action));
+ if (fallback && MLX5_POOL_GET_CNT
+ (pool, j)->dcs_when_free)
claim_zero(mlx5_devx_cmd_destroy
- (MLX5_GET_POOL_CNT_EXT
- (pool, j)->dcs));
+ (cnt->dcs_when_free));
}
- TAILQ_REMOVE(&sh->cmng.ccont[i].pool_list, pool, next);
- rte_free(pool);
- pool = TAILQ_FIRST(&sh->cmng.ccont[i].pool_list);
+ mlx5_free(pool);
}
- rte_free(sh->cmng.ccont[i].pools);
+ mlx5_free(sh->cmng.pools);
}
mng = LIST_FIRST(&sh->cmng.mem_mngs);
while (mng) {
}
/**
- * Initialize the flow resources' indexed mempool.
+ * Initialize the aso flow meters management structure.
+ *
+ * @param[in] sh
+ * Pointer to mlx5_dev_ctx_shared object to free
+ */
+int
+mlx5_aso_flow_mtrs_mng_init(struct mlx5_dev_ctx_shared *sh)
+{
+ if (!sh->mtrmng) {
+ sh->mtrmng = mlx5_malloc(MLX5_MEM_ZERO,
+ sizeof(*sh->mtrmng),
+ RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
+ if (!sh->mtrmng) {
+ DRV_LOG(ERR,
+ "meter management allocation was failed.");
+ rte_errno = ENOMEM;
+ return -ENOMEM;
+ }
+ if (sh->meter_aso_en) {
+ rte_spinlock_init(&sh->mtrmng->pools_mng.mtrsl);
+ rte_rwlock_init(&sh->mtrmng->pools_mng.resize_mtrwl);
+ LIST_INIT(&sh->mtrmng->pools_mng.meters);
+ }
+ sh->mtrmng->def_policy_id = MLX5_INVALID_POLICY_ID;
+ }
+ return 0;
+}
+
+/**
+ * Close and release all the resources of
+ * the ASO flow meter management structure.
+ *
+ * @param[in] sh
+ * Pointer to mlx5_dev_ctx_shared object to free.
+ */
+static void
+mlx5_aso_flow_mtrs_mng_close(struct mlx5_dev_ctx_shared *sh)
+{
+ struct mlx5_aso_mtr_pool *mtr_pool;
+ struct mlx5_flow_mtr_mng *mtrmng = sh->mtrmng;
+ uint32_t idx;
+#ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
+ struct mlx5_aso_mtr *aso_mtr;
+ int i;
+#endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
+
+ if (sh->meter_aso_en) {
+ mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_POLICER);
+ idx = mtrmng->pools_mng.n_valid;
+ while (idx--) {
+ mtr_pool = mtrmng->pools_mng.pools[idx];
+#ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
+ for (i = 0; i < MLX5_ASO_MTRS_PER_POOL; i++) {
+ aso_mtr = &mtr_pool->mtrs[i];
+ if (aso_mtr->fm.meter_action)
+ claim_zero
+ (mlx5_glue->destroy_flow_action
+ (aso_mtr->fm.meter_action));
+ }
+#endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
+ claim_zero(mlx5_devx_cmd_destroy
+ (mtr_pool->devx_obj));
+ mtrmng->pools_mng.n_valid--;
+ mlx5_free(mtr_pool);
+ }
+ mlx5_free(sh->mtrmng->pools_mng.pools);
+ }
+ mlx5_free(sh->mtrmng);
+ sh->mtrmng = NULL;
+}
+
+/* Send FLOW_AGED event if needed. */
+void
+mlx5_age_event_prepare(struct mlx5_dev_ctx_shared *sh)
+{
+ struct mlx5_age_info *age_info;
+ uint32_t i;
+
+ for (i = 0; i < sh->max_port; i++) {
+ age_info = &sh->port[i].age_info;
+ if (!MLX5_AGE_GET(age_info, MLX5_AGE_EVENT_NEW))
+ continue;
+ MLX5_AGE_UNSET(age_info, MLX5_AGE_EVENT_NEW);
+ if (MLX5_AGE_GET(age_info, MLX5_AGE_TRIGGER)) {
+ MLX5_AGE_UNSET(age_info, MLX5_AGE_TRIGGER);
+ rte_eth_dev_callback_process
+ (&rte_eth_devices[sh->port[i].devx_ih_port_id],
+ RTE_ETH_EVENT_FLOW_AGED, NULL);
+ }
+ }
+}
+
+/*
+ * Initialize the ASO connection tracking structure.
*
* @param[in] sh
* Pointer to mlx5_dev_ctx_shared object.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_aso_ct_mng_init(struct mlx5_dev_ctx_shared *sh)
+{
+ int err;
+
+ if (sh->ct_mng)
+ return 0;
+ sh->ct_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->ct_mng),
+ RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
+ if (!sh->ct_mng) {
+ DRV_LOG(ERR, "ASO CT management allocation failed.");
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+ err = mlx5_aso_queue_init(sh, ASO_OPC_MOD_CONNECTION_TRACKING);
+ if (err) {
+ mlx5_free(sh->ct_mng);
+ /* rte_errno should be extracted from the failure. */
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ rte_spinlock_init(&sh->ct_mng->ct_sl);
+ rte_rwlock_init(&sh->ct_mng->resize_rwl);
+ LIST_INIT(&sh->ct_mng->free_cts);
+ return 0;
+}
+
+/*
+ * Close and release all the resources of the
+ * ASO connection tracking management structure.
+ *
* @param[in] sh
- * Pointer to user dev config.
+ * Pointer to mlx5_dev_ctx_shared object to free.
*/
static void
-mlx5_flow_ipool_create(struct mlx5_dev_ctx_shared *sh,
- const struct mlx5_dev_config *config)
+mlx5_flow_aso_ct_mng_close(struct mlx5_dev_ctx_shared *sh)
+{
+ struct mlx5_aso_ct_pools_mng *mng = sh->ct_mng;
+ struct mlx5_aso_ct_pool *ct_pool;
+ struct mlx5_aso_ct_action *ct;
+ uint32_t idx;
+ uint32_t val;
+ uint32_t cnt;
+ int i;
+
+ mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_CONNECTION_TRACKING);
+ idx = mng->next;
+ while (idx--) {
+ cnt = 0;
+ ct_pool = mng->pools[idx];
+ for (i = 0; i < MLX5_ASO_CT_ACTIONS_PER_POOL; i++) {
+ ct = &ct_pool->actions[i];
+ val = __atomic_fetch_sub(&ct->refcnt, 1,
+ __ATOMIC_RELAXED);
+ MLX5_ASSERT(val == 1);
+ if (val > 1)
+ cnt++;
+#ifdef HAVE_MLX5_DR_ACTION_ASO_CT
+ if (ct->dr_action_orig)
+ claim_zero(mlx5_glue->destroy_flow_action
+ (ct->dr_action_orig));
+ if (ct->dr_action_rply)
+ claim_zero(mlx5_glue->destroy_flow_action
+ (ct->dr_action_rply));
+#endif
+ }
+ claim_zero(mlx5_devx_cmd_destroy(ct_pool->devx_obj));
+ if (cnt) {
+ DRV_LOG(DEBUG, "%u ASO CT objects are being used in the pool %u",
+ cnt, i);
+ }
+ mlx5_free(ct_pool);
+ /* in case of failure. */
+ mng->next--;
+ }
+ mlx5_free(mng->pools);
+ mlx5_free(mng);
+ /* Management structure must be cleared to 0s during allocation. */
+ sh->ct_mng = NULL;
+}
+
+/**
+ * Initialize the flow resources' indexed mempool.
+ *
+ * @param[in] sh
+ * Pointer to mlx5_dev_ctx_shared object.
+ */
+static void
+mlx5_flow_ipool_create(struct mlx5_dev_ctx_shared *sh)
{
uint8_t i;
struct mlx5_indexed_pool_config cfg;
* according to PCI function flow configuration.
*/
case MLX5_IPOOL_MLX5_FLOW:
- cfg.size = config->dv_flow_en ?
+ cfg.size = sh->config.dv_flow_en ?
sizeof(struct mlx5_flow_handle) :
MLX5_FLOW_HANDLE_VERBS_SIZE;
break;
}
- if (config->reclaim_mode)
+ if (sh->config.reclaim_mode) {
cfg.release_mem_en = 1;
+ cfg.per_core_cache = 0;
+ } else {
+ cfg.release_mem_en = 0;
+ }
sh->ipool[i] = mlx5_ipool_create(&cfg);
}
}
+
/**
* Release the flow resources' indexed mempool.
*
for (i = 0; i < MLX5_IPOOL_MAX; ++i)
mlx5_ipool_destroy(sh->ipool[i]);
+ for (i = 0; i < MLX5_MAX_MODIFY_NUM; ++i)
+ if (sh->mdh_ipools[i])
+ mlx5_ipool_destroy(sh->mdh_ipools[i]);
+}
+
+/*
+ * Check if dynamic flex parser for eCPRI already exists.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * true on exists, false on not.
+ */
+bool
+mlx5_flex_parser_ecpri_exist(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
+
+ return !!prf->obj;
+}
+
+/*
+ * Allocation of a flex parser for eCPRI. Once created, this parser related
+ * resources will be held until the device is closed.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flex_parser_ecpri_alloc(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
+ struct mlx5_devx_graph_node_attr node = {
+ .modify_field_select = 0,
+ };
+ uint32_t ids[8];
+ int ret;
+
+ if (!priv->sh->cdev->config.hca_attr.parse_graph_flex_node) {
+ DRV_LOG(ERR, "Dynamic flex parser is not supported "
+ "for device %s.", priv->dev_data->name);
+ return -ENOTSUP;
+ }
+ node.header_length_mode = MLX5_GRAPH_NODE_LEN_FIXED;
+ /* 8 bytes now: 4B common header + 4B message body header. */
+ node.header_length_base_value = 0x8;
+ /* After MAC layer: Ether / VLAN. */
+ node.in[0].arc_parse_graph_node = MLX5_GRAPH_ARC_NODE_MAC;
+ /* Type of compared condition should be 0xAEFE in the L2 layer. */
+ node.in[0].compare_condition_value = RTE_ETHER_TYPE_ECPRI;
+ /* Sample #0: type in common header. */
+ node.sample[0].flow_match_sample_en = 1;
+ /* Fixed offset. */
+ node.sample[0].flow_match_sample_offset_mode = 0x0;
+ /* Only the 2nd byte will be used. */
+ node.sample[0].flow_match_sample_field_base_offset = 0x0;
+ /* Sample #1: message payload. */
+ node.sample[1].flow_match_sample_en = 1;
+ /* Fixed offset. */
+ node.sample[1].flow_match_sample_offset_mode = 0x0;
+ /*
+ * Only the first two bytes will be used right now, and its offset will
+ * start after the common header that with the length of a DW(u32).
+ */
+ node.sample[1].flow_match_sample_field_base_offset = sizeof(uint32_t);
+ prf->obj = mlx5_devx_cmd_create_flex_parser(priv->sh->cdev->ctx, &node);
+ if (!prf->obj) {
+ DRV_LOG(ERR, "Failed to create flex parser node object.");
+ return (rte_errno == 0) ? -ENODEV : -rte_errno;
+ }
+ prf->num = 2;
+ ret = mlx5_devx_cmd_query_parse_samples(prf->obj, ids, prf->num);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to query sample IDs.");
+ return (rte_errno == 0) ? -ENODEV : -rte_errno;
+ }
+ prf->offset[0] = 0x0;
+ prf->offset[1] = sizeof(uint32_t);
+ prf->ids[0] = ids[0];
+ prf->ids[1] = ids[1];
+ return 0;
+}
+
+/*
+ * Destroy the flex parser node, including the parser itself, input / output
+ * arcs and DW samples. Resources could be reused then.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx5_flex_parser_ecpri_release(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
+
+ if (prf->obj)
+ mlx5_devx_cmd_destroy(prf->obj);
+ prf->obj = NULL;
+}
+
+uint32_t
+mlx5_get_supported_sw_parsing_offloads(const struct mlx5_hca_attr *attr)
+{
+ uint32_t sw_parsing_offloads = 0;
+
+ if (attr->swp) {
+ sw_parsing_offloads |= MLX5_SW_PARSING_CAP;
+ if (attr->swp_csum)
+ sw_parsing_offloads |= MLX5_SW_PARSING_CSUM_CAP;
+
+ if (attr->swp_lso)
+ sw_parsing_offloads |= MLX5_SW_PARSING_TSO_CAP;
+ }
+ return sw_parsing_offloads;
+}
+
+uint32_t
+mlx5_get_supported_tunneling_offloads(const struct mlx5_hca_attr *attr)
+{
+ uint32_t tn_offloads = 0;
+
+ if (attr->tunnel_stateless_vxlan)
+ tn_offloads |= MLX5_TUNNELED_OFFLOADS_VXLAN_CAP;
+ if (attr->tunnel_stateless_gre)
+ tn_offloads |= MLX5_TUNNELED_OFFLOADS_GRE_CAP;
+ if (attr->tunnel_stateless_geneve_rx)
+ tn_offloads |= MLX5_TUNNELED_OFFLOADS_GENEVE_CAP;
+ return tn_offloads;
+}
+
+/* Fill all fields of UAR structure. */
+static int
+mlx5_rxtx_uars_prepare(struct mlx5_dev_ctx_shared *sh)
+{
+ int ret;
+
+ ret = mlx5_devx_uar_prepare(sh->cdev, &sh->tx_uar);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to prepare Tx DevX UAR.");
+ return -rte_errno;
+ }
+ MLX5_ASSERT(sh->tx_uar.obj);
+ MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->tx_uar.obj));
+ ret = mlx5_devx_uar_prepare(sh->cdev, &sh->rx_uar);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to prepare Rx DevX UAR.");
+ mlx5_devx_uar_release(&sh->tx_uar);
+ return -rte_errno;
+ }
+ MLX5_ASSERT(sh->rx_uar.obj);
+ MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->rx_uar.obj));
+ return 0;
+}
+
+static void
+mlx5_rxtx_uars_release(struct mlx5_dev_ctx_shared *sh)
+{
+ mlx5_devx_uar_release(&sh->rx_uar);
+ mlx5_devx_uar_release(&sh->tx_uar);
+}
+
+/**
+ * rte_mempool_walk() callback to unregister Rx mempools.
+ * It used when implicit mempool registration is disabled.
+ *
+ * @param mp
+ * The mempool being walked.
+ * @param arg
+ * Pointer to the device shared context.
+ */
+static void
+mlx5_dev_ctx_shared_rx_mempool_unregister_cb(struct rte_mempool *mp, void *arg)
+{
+ struct mlx5_dev_ctx_shared *sh = arg;
+
+ mlx5_dev_mempool_unregister(sh->cdev, mp);
+}
+
+/**
+ * Callback used when implicit mempool registration is disabled
+ * in order to track Rx mempool destruction.
+ *
+ * @param event
+ * Mempool life cycle event.
+ * @param mp
+ * An Rx mempool registered explicitly when the port is started.
+ * @param arg
+ * Pointer to a device shared context.
+ */
+static void
+mlx5_dev_ctx_shared_rx_mempool_event_cb(enum rte_mempool_event event,
+ struct rte_mempool *mp, void *arg)
+{
+ struct mlx5_dev_ctx_shared *sh = arg;
+
+ if (event == RTE_MEMPOOL_EVENT_DESTROY)
+ mlx5_dev_mempool_unregister(sh->cdev, mp);
+}
+
+int
+mlx5_dev_ctx_shared_mempool_subscribe(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ int ret;
+
+ /* Check if we only need to track Rx mempool destruction. */
+ if (!sh->cdev->config.mr_mempool_reg_en) {
+ ret = rte_mempool_event_callback_register
+ (mlx5_dev_ctx_shared_rx_mempool_event_cb, sh);
+ return ret == 0 || rte_errno == EEXIST ? 0 : ret;
+ }
+ return mlx5_dev_mempool_subscribe(sh->cdev);
+}
+
+/**
+ * Set up multiple TISs with different affinities according to
+ * number of bonding ports
+ *
+ * @param priv
+ * Pointer of shared context.
+ *
+ * @return
+ * Zero on success, -1 otherwise.
+ */
+static int
+mlx5_setup_tis(struct mlx5_dev_ctx_shared *sh)
+{
+ int i;
+ struct mlx5_devx_lag_context lag_ctx = { 0 };
+ struct mlx5_devx_tis_attr tis_attr = { 0 };
+
+ tis_attr.transport_domain = sh->td->id;
+ if (sh->bond.n_port) {
+ if (!mlx5_devx_cmd_query_lag(sh->cdev->ctx, &lag_ctx)) {
+ sh->lag.tx_remap_affinity[0] =
+ lag_ctx.tx_remap_affinity_1;
+ sh->lag.tx_remap_affinity[1] =
+ lag_ctx.tx_remap_affinity_2;
+ sh->lag.affinity_mode = lag_ctx.port_select_mode;
+ } else {
+ DRV_LOG(ERR, "Failed to query lag affinity.");
+ return -1;
+ }
+ if (sh->lag.affinity_mode == MLX5_LAG_MODE_TIS) {
+ for (i = 0; i < sh->bond.n_port; i++) {
+ tis_attr.lag_tx_port_affinity =
+ MLX5_IFC_LAG_MAP_TIS_AFFINITY(i,
+ sh->bond.n_port);
+ sh->tis[i] = mlx5_devx_cmd_create_tis(sh->cdev->ctx,
+ &tis_attr);
+ if (!sh->tis[i]) {
+ DRV_LOG(ERR, "Failed to TIS %d/%d for bonding device"
+ " %s.", i, sh->bond.n_port,
+ sh->ibdev_name);
+ return -1;
+ }
+ }
+ DRV_LOG(DEBUG, "LAG number of ports : %d, affinity_1 & 2 : pf%d & %d.\n",
+ sh->bond.n_port, lag_ctx.tx_remap_affinity_1,
+ lag_ctx.tx_remap_affinity_2);
+ return 0;
+ }
+ if (sh->lag.affinity_mode == MLX5_LAG_MODE_HASH)
+ DRV_LOG(INFO, "Device %s enabled HW hash based LAG.",
+ sh->ibdev_name);
+ }
+ tis_attr.lag_tx_port_affinity = 0;
+ sh->tis[0] = mlx5_devx_cmd_create_tis(sh->cdev->ctx, &tis_attr);
+ if (!sh->tis[0]) {
+ DRV_LOG(ERR, "Failed to TIS 0 for bonding device"
+ " %s.", sh->ibdev_name);
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * Verify and store value for share device argument.
+ *
+ * @param[in] key
+ * Key argument to verify.
+ * @param[in] val
+ * Value associated with key.
+ * @param opaque
+ * User data.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_dev_args_check_handler(const char *key, const char *val, void *opaque)
+{
+ struct mlx5_sh_config *config = opaque;
+ signed long tmp;
+
+ errno = 0;
+ tmp = strtol(val, NULL, 0);
+ if (errno) {
+ rte_errno = errno;
+ DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
+ return -rte_errno;
+ }
+ if (tmp < 0 && strcmp(MLX5_TX_PP, key) && strcmp(MLX5_TX_SKEW, key)) {
+ /* Negative values are acceptable for some keys only. */
+ rte_errno = EINVAL;
+ DRV_LOG(WARNING, "%s: invalid negative value \"%s\"", key, val);
+ return -rte_errno;
+ }
+ if (strcmp(MLX5_TX_PP, key) == 0) {
+ unsigned long mod = tmp >= 0 ? tmp : -tmp;
+
+ if (!mod) {
+ DRV_LOG(ERR, "Zero Tx packet pacing parameter.");
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ config->tx_pp = tmp;
+ } else if (strcmp(MLX5_TX_SKEW, key) == 0) {
+ config->tx_skew = tmp;
+ } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
+ config->l3_vxlan_en = !!tmp;
+ } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
+ config->vf_nl_en = !!tmp;
+ } else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
+ config->dv_esw_en = !!tmp;
+ } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
+ if (tmp > 2) {
+ DRV_LOG(ERR, "Invalid %s parameter.", key);
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ config->dv_flow_en = tmp;
+ } else if (strcmp(MLX5_DV_XMETA_EN, key) == 0) {
+ if (tmp != MLX5_XMETA_MODE_LEGACY &&
+ tmp != MLX5_XMETA_MODE_META16 &&
+ tmp != MLX5_XMETA_MODE_META32 &&
+ tmp != MLX5_XMETA_MODE_MISS_INFO) {
+ DRV_LOG(ERR, "Invalid extensive metadata parameter.");
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ if (tmp != MLX5_XMETA_MODE_MISS_INFO)
+ config->dv_xmeta_en = tmp;
+ else
+ config->dv_miss_info = 1;
+ } else if (strcmp(MLX5_LACP_BY_USER, key) == 0) {
+ config->lacp_by_user = !!tmp;
+ } else if (strcmp(MLX5_RECLAIM_MEM, key) == 0) {
+ if (tmp != MLX5_RCM_NONE &&
+ tmp != MLX5_RCM_LIGHT &&
+ tmp != MLX5_RCM_AGGR) {
+ DRV_LOG(ERR, "Unrecognize %s: \"%s\"", key, val);
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ config->reclaim_mode = tmp;
+ } else if (strcmp(MLX5_DECAP_EN, key) == 0) {
+ config->decap_en = !!tmp;
+ } else if (strcmp(MLX5_ALLOW_DUPLICATE_PATTERN, key) == 0) {
+ config->allow_duplicate_pattern = !!tmp;
+ }
+ return 0;
+}
+
+/**
+ * Parse user device parameters and adjust them according to device
+ * capabilities.
+ *
+ * @param sh
+ * Pointer to shared device context.
+ * @param mkvlist
+ * Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
+ * @param config
+ * Pointer to shared device configuration structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_shared_dev_ctx_args_config(struct mlx5_dev_ctx_shared *sh,
+ struct mlx5_kvargs_ctrl *mkvlist,
+ struct mlx5_sh_config *config)
+{
+ const char **params = (const char *[]){
+ MLX5_TX_PP,
+ MLX5_TX_SKEW,
+ MLX5_L3_VXLAN_EN,
+ MLX5_VF_NL_EN,
+ MLX5_DV_ESW_EN,
+ MLX5_DV_FLOW_EN,
+ MLX5_DV_XMETA_EN,
+ MLX5_LACP_BY_USER,
+ MLX5_RECLAIM_MEM,
+ MLX5_DECAP_EN,
+ MLX5_ALLOW_DUPLICATE_PATTERN,
+ NULL,
+ };
+ int ret = 0;
+
+ /* Default configuration. */
+ memset(config, 0, sizeof(*config));
+ config->vf_nl_en = 1;
+ config->dv_esw_en = 1;
+ config->dv_flow_en = 1;
+ config->decap_en = 1;
+ config->allow_duplicate_pattern = 1;
+ if (mkvlist != NULL) {
+ /* Process parameters. */
+ ret = mlx5_kvargs_process(mkvlist, params,
+ mlx5_dev_args_check_handler, config);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to process device arguments: %s",
+ strerror(rte_errno));
+ return -rte_errno;
+ }
+ }
+ /* Adjust parameters according to device capabilities. */
+ if (config->dv_flow_en && !sh->dev_cap.dv_flow_en) {
+ DRV_LOG(WARNING, "DV flow is not supported.");
+ config->dv_flow_en = 0;
+ }
+ if (config->dv_esw_en && !sh->dev_cap.dv_esw_en) {
+ DRV_LOG(DEBUG, "E-Switch DV flow is not supported.");
+ config->dv_esw_en = 0;
+ }
+ if (config->dv_esw_en && !config->dv_flow_en) {
+ DRV_LOG(DEBUG,
+ "E-Switch DV flow is supported only when DV flow is enabled.");
+ config->dv_esw_en = 0;
+ }
+ if (config->dv_miss_info && config->dv_esw_en)
+ config->dv_xmeta_en = MLX5_XMETA_MODE_META16;
+ if (!config->dv_esw_en &&
+ config->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ DRV_LOG(WARNING,
+ "Metadata mode %u is not supported (no E-Switch).",
+ config->dv_xmeta_en);
+ config->dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
+ }
+ if (config->tx_pp && !sh->dev_cap.txpp_en) {
+ DRV_LOG(ERR, "Packet pacing is not supported.");
+ rte_errno = ENODEV;
+ return -rte_errno;
+ }
+ if (!config->tx_pp && config->tx_skew) {
+ DRV_LOG(WARNING,
+ "\"tx_skew\" doesn't affect without \"tx_pp\".");
+ }
+ /*
+ * If HW has bug working with tunnel packet decapsulation and scatter
+ * FCS, and decapsulation is needed, clear the hw_fcs_strip bit.
+ * Then RTE_ETH_RX_OFFLOAD_KEEP_CRC bit will not be set anymore.
+ */
+ if (sh->dev_cap.scatter_fcs_w_decap_disable && sh->config.decap_en)
+ config->hw_fcs_strip = 0;
+ else
+ config->hw_fcs_strip = sh->dev_cap.hw_fcs_strip;
+ DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
+ (config->hw_fcs_strip ? "" : "not "));
+ DRV_LOG(DEBUG, "\"tx_pp\" is %d.", config->tx_pp);
+ DRV_LOG(DEBUG, "\"tx_skew\" is %d.", config->tx_skew);
+ DRV_LOG(DEBUG, "\"reclaim_mode\" is %u.", config->reclaim_mode);
+ DRV_LOG(DEBUG, "\"dv_esw_en\" is %u.", config->dv_esw_en);
+ DRV_LOG(DEBUG, "\"dv_flow_en\" is %u.", config->dv_flow_en);
+ DRV_LOG(DEBUG, "\"dv_xmeta_en\" is %u.", config->dv_xmeta_en);
+ DRV_LOG(DEBUG, "\"dv_miss_info\" is %u.", config->dv_miss_info);
+ DRV_LOG(DEBUG, "\"l3_vxlan_en\" is %u.", config->l3_vxlan_en);
+ DRV_LOG(DEBUG, "\"vf_nl_en\" is %u.", config->vf_nl_en);
+ DRV_LOG(DEBUG, "\"lacp_by_user\" is %u.", config->lacp_by_user);
+ DRV_LOG(DEBUG, "\"decap_en\" is %u.", config->decap_en);
+ DRV_LOG(DEBUG, "\"allow_duplicate_pattern\" is %u.",
+ config->allow_duplicate_pattern);
+ return 0;
+}
+
+/**
+ * Configure realtime timestamp format.
+ *
+ * @param sh
+ * Pointer to mlx5_dev_ctx_shared object.
+ * @param hca_attr
+ * Pointer to DevX HCA capabilities structure.
+ */
+void
+mlx5_rt_timestamp_config(struct mlx5_dev_ctx_shared *sh,
+ struct mlx5_hca_attr *hca_attr)
+{
+ uint32_t dw_cnt = MLX5_ST_SZ_DW(register_mtutc);
+ uint32_t reg[dw_cnt];
+ int ret = ENOTSUP;
+
+ if (hca_attr->access_register_user)
+ ret = mlx5_devx_cmd_register_read(sh->cdev->ctx,
+ MLX5_REGISTER_ID_MTUTC, 0,
+ reg, dw_cnt);
+ if (!ret) {
+ uint32_t ts_mode;
+
+ /* MTUTC register is read successfully. */
+ ts_mode = MLX5_GET(register_mtutc, reg, time_stamp_mode);
+ if (ts_mode == MLX5_MTUTC_TIMESTAMP_MODE_REAL_TIME)
+ sh->dev_cap.rt_timestamp = 1;
+ } else {
+ /* Kernel does not support register reading. */
+ if (hca_attr->dev_freq_khz == (NS_PER_S / MS_PER_S))
+ sh->dev_cap.rt_timestamp = 1;
+ }
}
/**
*
* @param[in] spawn
* Pointer to the device attributes (name, port, etc).
- * @param[in] config
- * Pointer to device configuration structure.
+ * @param mkvlist
+ * Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
*
* @return
* Pointer to mlx5_dev_ctx_shared object on success,
*/
struct mlx5_dev_ctx_shared *
mlx5_alloc_shared_dev_ctx(const struct mlx5_dev_spawn_data *spawn,
- const struct mlx5_dev_config *config)
+ struct mlx5_kvargs_ctrl *mkvlist)
{
struct mlx5_dev_ctx_shared *sh;
int err = 0;
uint32_t i;
- struct mlx5_devx_tis_attr tis_attr = { 0 };
MLX5_ASSERT(spawn);
/* Secondary process should not create the shared context. */
pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
/* Search for IB context by device name. */
LIST_FOREACH(sh, &mlx5_dev_ctx_list, next) {
- if (!strcmp(sh->ibdev_name,
- mlx5_os_get_dev_device_name(spawn->phys_dev))) {
+ if (!strcmp(sh->ibdev_name, spawn->phys_dev_name)) {
sh->refcnt++;
goto exit;
}
}
/* No device found, we have to create new shared context. */
MLX5_ASSERT(spawn->max_port);
- sh = rte_zmalloc("ethdev shared ib context",
+ sh = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
sizeof(struct mlx5_dev_ctx_shared) +
- spawn->max_port *
- sizeof(struct mlx5_dev_shared_port),
- RTE_CACHE_LINE_SIZE);
+ spawn->max_port * sizeof(struct mlx5_dev_shared_port),
+ RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
if (!sh) {
- DRV_LOG(ERR, "shared context allocation failure");
- rte_errno = ENOMEM;
+ DRV_LOG(ERR, "Shared context allocation failure.");
+ rte_errno = ENOMEM;
goto exit;
}
- err = mlx5_os_open_device(spawn, config, sh);
- if (!sh->ctx)
+ pthread_mutex_init(&sh->txpp.mutex, NULL);
+ sh->numa_node = spawn->cdev->dev->numa_node;
+ sh->cdev = spawn->cdev;
+ sh->esw_mode = !!(spawn->info.master || spawn->info.representor);
+ if (spawn->bond_info)
+ sh->bond = *spawn->bond_info;
+ err = mlx5_os_capabilities_prepare(sh);
+ if (err) {
+ DRV_LOG(ERR, "Fail to configure device capabilities.");
goto error;
- err = mlx5_os_get_dev_attr(sh->ctx, &sh->device_attr);
+ }
+ err = mlx5_shared_dev_ctx_args_config(sh, mkvlist, &sh->config);
if (err) {
- DRV_LOG(DEBUG, "mlx5_os_get_dev_attr() failed");
+ DRV_LOG(ERR, "Failed to process device configure: %s",
+ strerror(rte_errno));
goto error;
}
sh->refcnt = 1;
sh->max_port = spawn->max_port;
- strncpy(sh->ibdev_name, mlx5_os_get_ctx_device_name(sh->ctx),
+ strncpy(sh->ibdev_name, mlx5_os_get_ctx_device_name(sh->cdev->ctx),
sizeof(sh->ibdev_name) - 1);
- strncpy(sh->ibdev_path, mlx5_os_get_ctx_device_path(sh->ctx),
+ strncpy(sh->ibdev_path, mlx5_os_get_ctx_device_path(sh->cdev->ctx),
sizeof(sh->ibdev_path) - 1);
/*
- * Setting port_id to max unallowed value means
- * there is no interrupt subhandler installed for
- * the given port index i.
+ * Setting port_id to max unallowed value means there is no interrupt
+ * subhandler installed for the given port index i.
*/
for (i = 0; i < sh->max_port; i++) {
sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
sh->port[i].devx_ih_port_id = RTE_MAX_ETHPORTS;
+ sh->port[i].nl_ih_port_id = RTE_MAX_ETHPORTS;
}
- sh->pd = mlx5_glue->alloc_pd(sh->ctx);
- if (sh->pd == NULL) {
- DRV_LOG(ERR, "PD allocation failure");
- err = ENOMEM;
- goto error;
- }
- if (sh->devx) {
- err = mlx5_os_get_pdn(sh->pd, &sh->pdn);
- if (err) {
- DRV_LOG(ERR, "Fail to extract pdn from PD");
- goto error;
- }
- sh->td = mlx5_devx_cmd_create_td(sh->ctx);
+ if (sh->cdev->config.devx) {
+ sh->td = mlx5_devx_cmd_create_td(sh->cdev->ctx);
if (!sh->td) {
DRV_LOG(ERR, "TD allocation failure");
- err = ENOMEM;
+ rte_errno = ENOMEM;
goto error;
}
- tis_attr.transport_domain = sh->td->id;
- sh->tis = mlx5_devx_cmd_create_tis(sh->ctx, &tis_attr);
- if (!sh->tis) {
+ if (mlx5_setup_tis(sh)) {
DRV_LOG(ERR, "TIS allocation failure");
- err = ENOMEM;
+ rte_errno = ENOMEM;
goto error;
}
- }
- sh->flow_id_pool = mlx5_flow_id_pool_alloc
- ((1 << HAIRPIN_FLOW_ID_BITS) - 1);
- if (!sh->flow_id_pool) {
- DRV_LOG(ERR, "can't create flow id pool");
- err = ENOMEM;
- goto error;
- }
+ err = mlx5_rxtx_uars_prepare(sh);
+ if (err)
+ goto error;
#ifndef RTE_ARCH_64
- /* Initialize UAR access locks for 32bit implementations. */
- rte_spinlock_init(&sh->uar_lock_cq);
- for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
- rte_spinlock_init(&sh->uar_lock[i]);
+ } else {
+ /* Initialize UAR access locks for 32bit implementations. */
+ rte_spinlock_init(&sh->uar_lock_cq);
+ for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
+ rte_spinlock_init(&sh->uar_lock[i]);
#endif
- /*
- * Once the device is added to the list of memory event
- * callback, its global MR cache table cannot be expanded
- * on the fly because of deadlock. If it overflows, lookup
- * should be done by searching MR list linearly, which is slow.
- *
- * At this point the device is not added to the memory
- * event list yet, context is just being created.
- */
- err = mlx5_mr_btree_init(&sh->share_cache.cache,
- MLX5_MR_BTREE_CACHE_N * 2,
- spawn->pci_dev->device.numa_node);
- if (err) {
- err = rte_errno;
- goto error;
}
- mlx5_os_set_reg_mr_cb(&sh->share_cache.reg_mr_cb,
- &sh->share_cache.dereg_mr_cb);
mlx5_os_dev_shared_handler_install(sh);
- sh->cnt_id_tbl = mlx5_l3t_create(MLX5_L3T_TYPE_DWORD);
- if (!sh->cnt_id_tbl) {
- err = rte_errno;
- goto error;
+ if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
+ err = mlx5_flow_os_init_workspace_once();
+ if (err)
+ goto error;
}
mlx5_flow_aging_init(sh);
mlx5_flow_counters_mng_init(sh);
- mlx5_flow_ipool_create(sh, config);
- /* Add device to memory callback list. */
- rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
- LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
- sh, mem_event_cb);
- rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
+ mlx5_flow_ipool_create(sh);
/* Add context to the global device list. */
LIST_INSERT_HEAD(&mlx5_dev_ctx_list, sh, next);
+ rte_spinlock_init(&sh->geneve_tlv_opt_sl);
exit:
pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
return sh;
error:
+ err = rte_errno;
+ pthread_mutex_destroy(&sh->txpp.mutex);
pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
MLX5_ASSERT(sh);
- if (sh->cnt_id_tbl) {
- mlx5_l3t_destroy(sh->cnt_id_tbl);
- sh->cnt_id_tbl = NULL;
- }
- if (sh->tis)
- claim_zero(mlx5_devx_cmd_destroy(sh->tis));
+ mlx5_rxtx_uars_release(sh);
+ i = 0;
+ do {
+ if (sh->tis[i])
+ claim_zero(mlx5_devx_cmd_destroy(sh->tis[i]));
+ } while (++i < (uint32_t)sh->bond.n_port);
if (sh->td)
claim_zero(mlx5_devx_cmd_destroy(sh->td));
- if (sh->pd)
- claim_zero(mlx5_glue->dealloc_pd(sh->pd));
- if (sh->ctx)
- claim_zero(mlx5_glue->close_device(sh->ctx));
- if (sh->flow_id_pool)
- mlx5_flow_id_pool_release(sh->flow_id_pool);
- rte_free(sh);
- MLX5_ASSERT(err > 0);
+ mlx5_free(sh);
rte_errno = err;
return NULL;
}
void
mlx5_free_shared_dev_ctx(struct mlx5_dev_ctx_shared *sh)
{
+ int ret;
+ int i = 0;
+
pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
#ifdef RTE_LIBRTE_MLX5_DEBUG
/* Check the object presence in the list. */
MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
if (--sh->refcnt)
goto exit;
- /* Remove from memory callback device list. */
- rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
- LIST_REMOVE(sh, mem_event_cb);
- rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
- /* Release created Memory Regions. */
- mlx5_mr_release_cache(&sh->share_cache);
+ /* Stop watching for mempool events and unregister all mempools. */
+ if (!sh->cdev->config.mr_mempool_reg_en) {
+ ret = rte_mempool_event_callback_unregister
+ (mlx5_dev_ctx_shared_rx_mempool_event_cb, sh);
+ if (ret == 0)
+ rte_mempool_walk
+ (mlx5_dev_ctx_shared_rx_mempool_unregister_cb, sh);
+ }
/* Remove context from the global device list. */
LIST_REMOVE(sh, next);
+ /* Release resources on the last device removal. */
+ if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
+ mlx5_os_net_cleanup();
+ mlx5_flow_os_release_workspace();
+ }
+ pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
+ if (sh->flex_parsers_dv) {
+ mlx5_list_destroy(sh->flex_parsers_dv);
+ sh->flex_parsers_dv = NULL;
+ }
/*
* Ensure there is no async event handler installed.
* Only primary process handles async device events.
**/
mlx5_flow_counters_mng_close(sh);
+ if (sh->ct_mng)
+ mlx5_flow_aso_ct_mng_close(sh);
+ if (sh->aso_age_mng) {
+ mlx5_flow_aso_age_mng_close(sh);
+ sh->aso_age_mng = NULL;
+ }
+ if (sh->mtrmng)
+ mlx5_aso_flow_mtrs_mng_close(sh);
mlx5_flow_ipool_destroy(sh);
mlx5_os_dev_shared_handler_uninstall(sh);
- if (sh->cnt_id_tbl) {
- mlx5_l3t_destroy(sh->cnt_id_tbl);
- sh->cnt_id_tbl = NULL;
- }
- if (sh->pd)
- claim_zero(mlx5_glue->dealloc_pd(sh->pd));
- if (sh->tis)
- claim_zero(mlx5_devx_cmd_destroy(sh->tis));
+ mlx5_rxtx_uars_release(sh);
+ do {
+ if (sh->tis[i])
+ claim_zero(mlx5_devx_cmd_destroy(sh->tis[i]));
+ } while (++i < sh->bond.n_port);
if (sh->td)
claim_zero(mlx5_devx_cmd_destroy(sh->td));
- if (sh->ctx)
- claim_zero(mlx5_glue->close_device(sh->ctx));
- if (sh->flow_id_pool)
- mlx5_flow_id_pool_release(sh->flow_id_pool);
- rte_free(sh);
+ MLX5_ASSERT(sh->geneve_tlv_option_resource == NULL);
+ pthread_mutex_destroy(&sh->txpp.mutex);
+ mlx5_free(sh);
+ return;
exit:
pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
}
/**
- * Destroy table hash list and all the root entries per domain.
+ * Destroy table hash list.
*
* @param[in] priv
* Pointer to the private device data structure.
mlx5_free_table_hash_list(struct mlx5_priv *priv)
{
struct mlx5_dev_ctx_shared *sh = priv->sh;
- struct mlx5_flow_tbl_data_entry *tbl_data;
- union mlx5_flow_tbl_key table_key = {
- {
- .table_id = 0,
- .reserved = 0,
- .domain = 0,
- .direction = 0,
- }
- };
- struct mlx5_hlist_entry *pos;
-
- if (!sh->flow_tbls)
+ struct mlx5_hlist **tbls = (priv->sh->config.dv_flow_en == 2) ?
+ &sh->groups : &sh->flow_tbls;
+ if (*tbls == NULL)
return;
- pos = mlx5_hlist_lookup(sh->flow_tbls, table_key.v64);
- if (pos) {
- tbl_data = container_of(pos, struct mlx5_flow_tbl_data_entry,
- entry);
- MLX5_ASSERT(tbl_data);
- mlx5_hlist_remove(sh->flow_tbls, pos);
- rte_free(tbl_data);
- }
- table_key.direction = 1;
- pos = mlx5_hlist_lookup(sh->flow_tbls, table_key.v64);
- if (pos) {
- tbl_data = container_of(pos, struct mlx5_flow_tbl_data_entry,
- entry);
- MLX5_ASSERT(tbl_data);
- mlx5_hlist_remove(sh->flow_tbls, pos);
- rte_free(tbl_data);
- }
- table_key.direction = 0;
- table_key.domain = 1;
- pos = mlx5_hlist_lookup(sh->flow_tbls, table_key.v64);
- if (pos) {
- tbl_data = container_of(pos, struct mlx5_flow_tbl_data_entry,
- entry);
- MLX5_ASSERT(tbl_data);
- mlx5_hlist_remove(sh->flow_tbls, pos);
- rte_free(tbl_data);
- }
- mlx5_hlist_destroy(sh->flow_tbls, NULL, NULL);
+ mlx5_hlist_destroy(*tbls);
+ *tbls = NULL;
+}
+
+#if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
+/**
+ * Allocate HW steering group hash list.
+ *
+ * @param[in] priv
+ * Pointer to the private device data structure.
+ */
+static int
+mlx5_alloc_hw_group_hash_list(struct mlx5_priv *priv)
+{
+ int err = 0;
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ char s[MLX5_NAME_SIZE];
+
+ MLX5_ASSERT(sh);
+ snprintf(s, sizeof(s), "%s_flow_groups", priv->sh->ibdev_name);
+ sh->groups = mlx5_hlist_create
+ (s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE,
+ false, true, sh,
+ flow_hw_grp_create_cb,
+ flow_hw_grp_match_cb,
+ flow_hw_grp_remove_cb,
+ flow_hw_grp_clone_cb,
+ flow_hw_grp_clone_free_cb);
+ if (!sh->groups) {
+ DRV_LOG(ERR, "flow groups with hash creation failed.");
+ err = ENOMEM;
+ }
+ return err;
}
+#endif
+
/**
* Initialize flow table hash list and create the root tables entry
* Zero on success, positive error code otherwise.
*/
int
-mlx5_alloc_table_hash_list(struct mlx5_priv *priv)
+mlx5_alloc_table_hash_list(struct mlx5_priv *priv __rte_unused)
{
- struct mlx5_dev_ctx_shared *sh = priv->sh;
- char s[MLX5_HLIST_NAMESIZE];
int err = 0;
+ /* Tables are only used in DV and DR modes. */
+#if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ char s[MLX5_NAME_SIZE];
+
+ if (priv->sh->config.dv_flow_en == 2)
+ return mlx5_alloc_hw_group_hash_list(priv);
MLX5_ASSERT(sh);
snprintf(s, sizeof(s), "%s_flow_table", priv->sh->ibdev_name);
- sh->flow_tbls = mlx5_hlist_create(s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE);
+ sh->flow_tbls = mlx5_hlist_create(s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE,
+ false, true, sh,
+ flow_dv_tbl_create_cb,
+ flow_dv_tbl_match_cb,
+ flow_dv_tbl_remove_cb,
+ flow_dv_tbl_clone_cb,
+ flow_dv_tbl_clone_free_cb);
if (!sh->flow_tbls) {
DRV_LOG(ERR, "flow tables with hash creation failed.");
err = ENOMEM;
return err;
}
#ifndef HAVE_MLX5DV_DR
+ struct rte_flow_error error;
+ struct rte_eth_dev *dev = &rte_eth_devices[priv->dev_data->port_id];
+
/*
* In case we have not DR support, the zero tables should be created
* because DV expect to see them even if they cannot be created by
* RDMA-CORE.
*/
- union mlx5_flow_tbl_key table_key = {
- {
- .table_id = 0,
- .reserved = 0,
- .domain = 0,
- .direction = 0,
- }
- };
- struct mlx5_flow_tbl_data_entry *tbl_data = rte_zmalloc(NULL,
- sizeof(*tbl_data), 0);
-
- if (!tbl_data) {
- err = ENOMEM;
- goto error;
- }
- tbl_data->entry.key = table_key.v64;
- err = mlx5_hlist_insert(sh->flow_tbls, &tbl_data->entry);
- if (err)
- goto error;
- rte_atomic32_init(&tbl_data->tbl.refcnt);
- rte_atomic32_inc(&tbl_data->tbl.refcnt);
- table_key.direction = 1;
- tbl_data = rte_zmalloc(NULL, sizeof(*tbl_data), 0);
- if (!tbl_data) {
- err = ENOMEM;
- goto error;
- }
- tbl_data->entry.key = table_key.v64;
- err = mlx5_hlist_insert(sh->flow_tbls, &tbl_data->entry);
- if (err)
- goto error;
- rte_atomic32_init(&tbl_data->tbl.refcnt);
- rte_atomic32_inc(&tbl_data->tbl.refcnt);
- table_key.direction = 0;
- table_key.domain = 1;
- tbl_data = rte_zmalloc(NULL, sizeof(*tbl_data), 0);
- if (!tbl_data) {
+ if (!flow_dv_tbl_resource_get(dev, 0, 0, 0, 0,
+ NULL, 0, 1, 0, &error) ||
+ !flow_dv_tbl_resource_get(dev, 0, 1, 0, 0,
+ NULL, 0, 1, 0, &error) ||
+ !flow_dv_tbl_resource_get(dev, 0, 0, 1, 0,
+ NULL, 0, 1, 0, &error)) {
err = ENOMEM;
goto error;
}
- tbl_data->entry.key = table_key.v64;
- err = mlx5_hlist_insert(sh->flow_tbls, &tbl_data->entry);
- if (err)
- goto error;
- rte_atomic32_init(&tbl_data->tbl.refcnt);
- rte_atomic32_inc(&tbl_data->tbl.refcnt);
return err;
error:
mlx5_free_table_hash_list(priv);
#endif /* HAVE_MLX5DV_DR */
+#endif
return err;
}
-/**
- * Initialize shared data between primary and secondary process.
- *
- * A memzone is reserved by primary process and secondary processes attach to
- * the memzone.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_init_shared_data(void)
-{
- const struct rte_memzone *mz;
- int ret = 0;
-
- rte_spinlock_lock(&mlx5_shared_data_lock);
- if (mlx5_shared_data == NULL) {
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- /* Allocate shared memory. */
- mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA,
- sizeof(*mlx5_shared_data),
- SOCKET_ID_ANY, 0);
- if (mz == NULL) {
- DRV_LOG(ERR,
- "Cannot allocate mlx5 shared data");
- ret = -rte_errno;
- goto error;
- }
- mlx5_shared_data = mz->addr;
- memset(mlx5_shared_data, 0, sizeof(*mlx5_shared_data));
- rte_spinlock_init(&mlx5_shared_data->lock);
- } else {
- /* Lookup allocated shared memory. */
- mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
- if (mz == NULL) {
- DRV_LOG(ERR,
- "Cannot attach mlx5 shared data");
- ret = -rte_errno;
- goto error;
- }
- mlx5_shared_data = mz->addr;
- memset(&mlx5_local_data, 0, sizeof(mlx5_local_data));
- }
- }
-error:
- rte_spinlock_unlock(&mlx5_shared_data_lock);
- return ret;
-}
-
/**
* Retrieve integer value from environment variable.
*
struct rte_eth_udp_tunnel *udp_tunnel)
{
MLX5_ASSERT(udp_tunnel != NULL);
- if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN &&
+ if (udp_tunnel->prot_type == RTE_ETH_TUNNEL_TYPE_VXLAN &&
udp_tunnel->udp_port == 4789)
return 0;
- if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN_GPE &&
+ if (udp_tunnel->prot_type == RTE_ETH_TUNNEL_TYPE_VXLAN_GPE &&
udp_tunnel->udp_port == 4790)
return 0;
return -ENOTSUP;
struct mlx5_proc_priv *ppriv;
size_t ppriv_size;
+ mlx5_proc_priv_uninit(dev);
/*
* UAR register table follows the process private structure. BlueFlame
* registers for Tx queues are stored in the table.
*/
- ppriv_size =
- sizeof(struct mlx5_proc_priv) + priv->txqs_n * sizeof(void *);
- ppriv = rte_malloc_socket("mlx5_proc_priv", ppriv_size,
- RTE_CACHE_LINE_SIZE, dev->device->numa_node);
+ ppriv_size = sizeof(struct mlx5_proc_priv) +
+ priv->txqs_n * sizeof(struct mlx5_uar_data);
+ ppriv = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, ppriv_size,
+ RTE_CACHE_LINE_SIZE, dev->device->numa_node);
if (!ppriv) {
rte_errno = ENOMEM;
return -rte_errno;
}
- ppriv->uar_table_sz = ppriv_size;
+ ppriv->uar_table_sz = priv->txqs_n;
dev->process_private = ppriv;
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ priv->sh->pppriv = ppriv;
return 0;
}
* @param dev
* Pointer to Ethernet device structure.
*/
-static void
+void
mlx5_proc_priv_uninit(struct rte_eth_dev *dev)
{
if (!dev->process_private)
return;
- rte_free(dev->process_private);
+ mlx5_free(dev->process_private);
dev->process_private = NULL;
}
* @param dev
* Pointer to Ethernet device structure.
*/
-void
+int
mlx5_dev_close(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
/* Check if process_private released. */
if (!dev->process_private)
- return;
+ return 0;
mlx5_tx_uar_uninit_secondary(dev);
mlx5_proc_priv_uninit(dev);
rte_eth_dev_release_port(dev);
- return;
+ return 0;
}
if (!priv->sh)
- return;
+ return 0;
DRV_LOG(DEBUG, "port %u closing device \"%s\"",
dev->data->port_id,
- ((priv->sh->ctx != NULL) ?
- mlx5_os_get_ctx_device_name(priv->sh->ctx) : ""));
+ ((priv->sh->cdev->ctx != NULL) ?
+ mlx5_os_get_ctx_device_name(priv->sh->cdev->ctx) : ""));
/*
* If default mreg copy action is removed at the stop stage,
* the search will return none and nothing will be done anymore.
* If all the flows are already flushed in the device stop stage,
* then this will return directly without any action.
*/
- mlx5_flow_list_flush(dev, &priv->flows, true);
+ mlx5_flow_list_flush(dev, MLX5_FLOW_TYPE_GEN, true);
+ mlx5_action_handle_flush(dev);
mlx5_flow_meter_flush(dev, NULL);
- /* Free the intermediate buffers for flow creation. */
- mlx5_flow_free_intermediate(dev);
/* Prevent crashes when queues are still in use. */
- dev->rx_pkt_burst = removed_rx_burst;
- dev->tx_pkt_burst = removed_tx_burst;
+ dev->rx_pkt_burst = rte_eth_pkt_burst_dummy;
+ dev->tx_pkt_burst = rte_eth_pkt_burst_dummy;
rte_wmb();
/* Disable datapath on secondary process. */
- mlx5_mp_req_stop_rxtx(dev);
- if (priv->rxqs != NULL) {
+ mlx5_mp_os_req_stop_rxtx(dev);
+ /* Free the eCPRI flex parser resource. */
+ mlx5_flex_parser_ecpri_release(dev);
+ mlx5_flex_item_port_cleanup(dev);
+#if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
+ flow_hw_resource_release(dev);
+#endif
+ if (priv->rxq_privs != NULL) {
/* XXX race condition if mlx5_rx_burst() is still running. */
- usleep(1000);
+ rte_delay_us_sleep(1000);
for (i = 0; (i != priv->rxqs_n); ++i)
mlx5_rxq_release(dev, i);
priv->rxqs_n = 0;
- priv->rxqs = NULL;
+ mlx5_free(priv->rxq_privs);
+ priv->rxq_privs = NULL;
}
if (priv->txqs != NULL) {
/* XXX race condition if mlx5_tx_burst() is still running. */
- usleep(1000);
+ rte_delay_us_sleep(1000);
for (i = 0; (i != priv->txqs_n); ++i)
mlx5_txq_release(dev, i);
priv->txqs_n = 0;
priv->txqs = NULL;
}
mlx5_proc_priv_uninit(dev);
+ if (priv->q_counters) {
+ mlx5_devx_cmd_destroy(priv->q_counters);
+ priv->q_counters = NULL;
+ }
+ if (priv->drop_queue.hrxq)
+ mlx5_drop_action_destroy(dev);
if (priv->mreg_cp_tbl)
- mlx5_hlist_destroy(priv->mreg_cp_tbl, NULL, NULL);
+ mlx5_hlist_destroy(priv->mreg_cp_tbl);
mlx5_mprq_free_mp(dev);
mlx5_os_free_shared_dr(priv);
if (priv->rss_conf.rss_key != NULL)
- rte_free(priv->rss_conf.rss_key);
+ mlx5_free(priv->rss_conf.rss_key);
if (priv->reta_idx != NULL)
- rte_free(priv->reta_idx);
- if (priv->config.vf)
- mlx5_nl_mac_addr_flush(priv->nl_socket_route, mlx5_ifindex(dev),
- dev->data->mac_addrs,
- MLX5_MAX_MAC_ADDRESSES, priv->mac_own);
+ mlx5_free(priv->reta_idx);
+ if (priv->sh->dev_cap.vf)
+ mlx5_os_mac_addr_flush(dev);
if (priv->nl_socket_route >= 0)
close(priv->nl_socket_route);
if (priv->nl_socket_rdma >= 0)
if (ret)
DRV_LOG(WARNING, "port %u some Rx queue objects still remain",
dev->data->port_id);
+ ret = mlx5_ext_rxq_verify(dev);
+ if (ret)
+ DRV_LOG(WARNING, "Port %u some external RxQ still remain.",
+ dev->data->port_id);
ret = mlx5_rxq_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some Rx queues still remain",
if (ret)
DRV_LOG(WARNING, "port %u some flows still remain",
dev->data->port_id);
+ if (priv->hrxqs)
+ mlx5_list_destroy(priv->hrxqs);
+ mlx5_free(priv->ext_rxqs);
/*
* Free the shared context in last turn, because the cleanup
* routines above may use some shared fields, like
- * mlx5_nl_mac_addr_flush() uses ibdev_path for retrieveing
+ * mlx5_os_mac_addr_flush() uses ibdev_path for retrieving
* ifindex if Netlink fails.
*/
mlx5_free_shared_dev_ctx(priv->sh);
unsigned int c = 0;
uint16_t port_id;
- MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+ MLX5_ETH_FOREACH_DEV(port_id, dev->device) {
struct mlx5_priv *opriv =
rte_eth_devices[port_id].data->dev_private;
* it is freed when dev_private is freed.
*/
dev->data->mac_addrs = NULL;
+ return 0;
}
+const struct eth_dev_ops mlx5_dev_ops = {
+ .dev_configure = mlx5_dev_configure,
+ .dev_start = mlx5_dev_start,
+ .dev_stop = mlx5_dev_stop,
+ .dev_set_link_down = mlx5_set_link_down,
+ .dev_set_link_up = mlx5_set_link_up,
+ .dev_close = mlx5_dev_close,
+ .promiscuous_enable = mlx5_promiscuous_enable,
+ .promiscuous_disable = mlx5_promiscuous_disable,
+ .allmulticast_enable = mlx5_allmulticast_enable,
+ .allmulticast_disable = mlx5_allmulticast_disable,
+ .link_update = mlx5_link_update,
+ .stats_get = mlx5_stats_get,
+ .stats_reset = mlx5_stats_reset,
+ .xstats_get = mlx5_xstats_get,
+ .xstats_reset = mlx5_xstats_reset,
+ .xstats_get_names = mlx5_xstats_get_names,
+ .fw_version_get = mlx5_fw_version_get,
+ .dev_infos_get = mlx5_dev_infos_get,
+ .representor_info_get = mlx5_representor_info_get,
+ .read_clock = mlx5_txpp_read_clock,
+ .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
+ .vlan_filter_set = mlx5_vlan_filter_set,
+ .rx_queue_setup = mlx5_rx_queue_setup,
+ .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
+ .tx_queue_setup = mlx5_tx_queue_setup,
+ .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
+ .rx_queue_release = mlx5_rx_queue_release,
+ .tx_queue_release = mlx5_tx_queue_release,
+ .rx_queue_start = mlx5_rx_queue_start,
+ .rx_queue_stop = mlx5_rx_queue_stop,
+ .tx_queue_start = mlx5_tx_queue_start,
+ .tx_queue_stop = mlx5_tx_queue_stop,
+ .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
+ .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
+ .mac_addr_remove = mlx5_mac_addr_remove,
+ .mac_addr_add = mlx5_mac_addr_add,
+ .mac_addr_set = mlx5_mac_addr_set,
+ .set_mc_addr_list = mlx5_set_mc_addr_list,
+ .mtu_set = mlx5_dev_set_mtu,
+ .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
+ .vlan_offload_set = mlx5_vlan_offload_set,
+ .reta_update = mlx5_dev_rss_reta_update,
+ .reta_query = mlx5_dev_rss_reta_query,
+ .rss_hash_update = mlx5_rss_hash_update,
+ .rss_hash_conf_get = mlx5_rss_hash_conf_get,
+ .flow_ops_get = mlx5_flow_ops_get,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
+ .rx_queue_intr_enable = mlx5_rx_intr_enable,
+ .rx_queue_intr_disable = mlx5_rx_intr_disable,
+ .is_removed = mlx5_is_removed,
+ .udp_tunnel_port_add = mlx5_udp_tunnel_port_add,
+ .get_module_info = mlx5_get_module_info,
+ .get_module_eeprom = mlx5_get_module_eeprom,
+ .hairpin_cap_get = mlx5_hairpin_cap_get,
+ .mtr_ops_get = mlx5_flow_meter_ops_get,
+ .hairpin_bind = mlx5_hairpin_bind,
+ .hairpin_unbind = mlx5_hairpin_unbind,
+ .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
+ .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
+ .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
+ .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
+ .get_monitor_addr = mlx5_get_monitor_addr,
+};
+
+/* Available operations from secondary process. */
+const struct eth_dev_ops mlx5_dev_sec_ops = {
+ .stats_get = mlx5_stats_get,
+ .stats_reset = mlx5_stats_reset,
+ .xstats_get = mlx5_xstats_get,
+ .xstats_reset = mlx5_xstats_reset,
+ .xstats_get_names = mlx5_xstats_get_names,
+ .fw_version_get = mlx5_fw_version_get,
+ .dev_infos_get = mlx5_dev_infos_get,
+ .representor_info_get = mlx5_representor_info_get,
+ .read_clock = mlx5_txpp_read_clock,
+ .rx_queue_start = mlx5_rx_queue_start,
+ .rx_queue_stop = mlx5_rx_queue_stop,
+ .tx_queue_start = mlx5_tx_queue_start,
+ .tx_queue_stop = mlx5_tx_queue_stop,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
+ .get_module_info = mlx5_get_module_info,
+ .get_module_eeprom = mlx5_get_module_eeprom,
+};
+
+/* Available operations in flow isolated mode. */
+const struct eth_dev_ops mlx5_dev_ops_isolate = {
+ .dev_configure = mlx5_dev_configure,
+ .dev_start = mlx5_dev_start,
+ .dev_stop = mlx5_dev_stop,
+ .dev_set_link_down = mlx5_set_link_down,
+ .dev_set_link_up = mlx5_set_link_up,
+ .dev_close = mlx5_dev_close,
+ .promiscuous_enable = mlx5_promiscuous_enable,
+ .promiscuous_disable = mlx5_promiscuous_disable,
+ .allmulticast_enable = mlx5_allmulticast_enable,
+ .allmulticast_disable = mlx5_allmulticast_disable,
+ .link_update = mlx5_link_update,
+ .stats_get = mlx5_stats_get,
+ .stats_reset = mlx5_stats_reset,
+ .xstats_get = mlx5_xstats_get,
+ .xstats_reset = mlx5_xstats_reset,
+ .xstats_get_names = mlx5_xstats_get_names,
+ .fw_version_get = mlx5_fw_version_get,
+ .dev_infos_get = mlx5_dev_infos_get,
+ .representor_info_get = mlx5_representor_info_get,
+ .read_clock = mlx5_txpp_read_clock,
+ .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
+ .vlan_filter_set = mlx5_vlan_filter_set,
+ .rx_queue_setup = mlx5_rx_queue_setup,
+ .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
+ .tx_queue_setup = mlx5_tx_queue_setup,
+ .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
+ .rx_queue_release = mlx5_rx_queue_release,
+ .tx_queue_release = mlx5_tx_queue_release,
+ .rx_queue_start = mlx5_rx_queue_start,
+ .rx_queue_stop = mlx5_rx_queue_stop,
+ .tx_queue_start = mlx5_tx_queue_start,
+ .tx_queue_stop = mlx5_tx_queue_stop,
+ .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
+ .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
+ .mac_addr_remove = mlx5_mac_addr_remove,
+ .mac_addr_add = mlx5_mac_addr_add,
+ .mac_addr_set = mlx5_mac_addr_set,
+ .set_mc_addr_list = mlx5_set_mc_addr_list,
+ .mtu_set = mlx5_dev_set_mtu,
+ .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
+ .vlan_offload_set = mlx5_vlan_offload_set,
+ .flow_ops_get = mlx5_flow_ops_get,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
+ .rx_queue_intr_enable = mlx5_rx_intr_enable,
+ .rx_queue_intr_disable = mlx5_rx_intr_disable,
+ .is_removed = mlx5_is_removed,
+ .get_module_info = mlx5_get_module_info,
+ .get_module_eeprom = mlx5_get_module_eeprom,
+ .hairpin_cap_get = mlx5_hairpin_cap_get,
+ .mtr_ops_get = mlx5_flow_meter_ops_get,
+ .hairpin_bind = mlx5_hairpin_bind,
+ .hairpin_unbind = mlx5_hairpin_unbind,
+ .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
+ .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
+ .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
+ .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
+ .get_monitor_addr = mlx5_get_monitor_addr,
+};
+
/**
* Verify and store value for device argument.
*
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_args_check(const char *key, const char *val, void *opaque)
+mlx5_port_args_check_handler(const char *key, const char *val, void *opaque)
{
- struct mlx5_dev_config *config = opaque;
- unsigned long mod;
+ struct mlx5_port_config *config = opaque;
signed long tmp;
/* No-op, port representors are processed in mlx5_dev_spawn(). */
DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
return -rte_errno;
}
- if (tmp < 0 && strcmp(MLX5_TX_PP, key) && strcmp(MLX5_TX_SKEW, key)) {
+ if (tmp < 0) {
/* Negative values are acceptable for some keys only. */
rte_errno = EINVAL;
DRV_LOG(WARNING, "%s: invalid negative value \"%s\"", key, val);
return -rte_errno;
}
- mod = tmp >= 0 ? tmp : -tmp;
if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
+ if (tmp > MLX5_CQE_RESP_FORMAT_L34H_STRIDX) {
+ DRV_LOG(ERR, "invalid CQE compression "
+ "format parameter");
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
config->cqe_comp = !!tmp;
- } else if (strcmp(MLX5_RXQ_CQE_PAD_EN, key) == 0) {
- config->cqe_pad = !!tmp;
+ config->cqe_comp_fmt = tmp;
} else if (strcmp(MLX5_RXQ_PKT_PAD_EN, key) == 0) {
config->hw_padding = !!tmp;
} else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
config->mprq.enabled = !!tmp;
} else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
- config->mprq.stride_num_n = tmp;
+ config->mprq.log_stride_num = tmp;
} else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_SIZE, key) == 0) {
- config->mprq.stride_size_n = tmp;
+ config->mprq.log_stride_size = tmp;
} else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
config->mprq.max_memcpy_len = tmp;
} else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
config->mps = !!tmp;
- } else if (strcmp(MLX5_TX_DB_NC, key) == 0) {
- if (tmp != MLX5_TXDB_CACHED &&
- tmp != MLX5_TXDB_NCACHED &&
- tmp != MLX5_TXDB_HEURISTIC) {
- DRV_LOG(ERR, "invalid Tx doorbell "
- "mapping parameter");
- rte_errno = EINVAL;
- return -rte_errno;
- }
- config->dbnc = tmp;
} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
config->txq_inline_mpw = tmp;
} else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
- } else if (strcmp(MLX5_TX_PP, key) == 0) {
- if (!mod) {
- DRV_LOG(ERR, "Zero Tx packet pacing parameter");
- rte_errno = EINVAL;
- return -rte_errno;
- }
- config->tx_pp = tmp;
- } else if (strcmp(MLX5_TX_SKEW, key) == 0) {
- config->tx_skew = tmp;
} else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
config->rx_vec_en = !!tmp;
- } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
- config->l3_vxlan_en = !!tmp;
- } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
- config->vf_nl_en = !!tmp;
- } else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
- config->dv_esw_en = !!tmp;
- } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
- config->dv_flow_en = !!tmp;
- } else if (strcmp(MLX5_DV_XMETA_EN, key) == 0) {
- if (tmp != MLX5_XMETA_MODE_LEGACY &&
- tmp != MLX5_XMETA_MODE_META16 &&
- tmp != MLX5_XMETA_MODE_META32) {
- DRV_LOG(ERR, "invalid extensive "
- "metadata parameter");
- rte_errno = EINVAL;
- return -rte_errno;
- }
- config->dv_xmeta_en = tmp;
- } else if (strcmp(MLX5_LACP_BY_USER, key) == 0) {
- config->lacp_by_user = !!tmp;
- } else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
- config->mr_ext_memseg_en = !!tmp;
} else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
config->max_dump_files_num = tmp;
} else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
- config->lro.timeout = tmp;
- } else if (strcmp(MLX5_CLASS_ARG_NAME, key) == 0) {
- DRV_LOG(DEBUG, "class argument is %s.", val);
+ config->lro_timeout = tmp;
} else if (strcmp(MLX5_HP_BUF_SIZE, key) == 0) {
config->log_hp_size = tmp;
- } else if (strcmp(MLX5_RECLAIM_MEM, key) == 0) {
- if (tmp != MLX5_RCM_NONE &&
- tmp != MLX5_RCM_LIGHT &&
- tmp != MLX5_RCM_AGGR) {
- DRV_LOG(ERR, "Unrecognize %s: \"%s\"", key, val);
- rte_errno = EINVAL;
- return -rte_errno;
- }
- config->reclaim_mode = tmp;
- } else {
- DRV_LOG(WARNING, "%s: unknown parameter", key);
- rte_errno = EINVAL;
- return -rte_errno;
+ } else if (strcmp(MLX5_DELAY_DROP, key) == 0) {
+ config->std_delay_drop = !!(tmp & MLX5_DELAY_DROP_STANDARD);
+ config->hp_delay_drop = !!(tmp & MLX5_DELAY_DROP_HAIRPIN);
}
return 0;
}
/**
- * Parse device parameters.
+ * Parse user port parameters and adjust them according to device capabilities.
*
+ * @param priv
+ * Pointer to shared device context.
+ * @param mkvlist
+ * Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
* @param config
- * Pointer to device configuration structure.
- * @param devargs
- * Device arguments structure.
+ * Pointer to port configuration structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
+mlx5_port_args_config(struct mlx5_priv *priv, struct mlx5_kvargs_ctrl *mkvlist,
+ struct mlx5_port_config *config)
{
+ struct mlx5_hca_attr *hca_attr = &priv->sh->cdev->config.hca_attr;
+ struct mlx5_dev_cap *dev_cap = &priv->sh->dev_cap;
+ bool devx = priv->sh->cdev->config.devx;
const char **params = (const char *[]){
MLX5_RXQ_CQE_COMP_EN,
- MLX5_RXQ_CQE_PAD_EN,
MLX5_RXQ_PKT_PAD_EN,
MLX5_RX_MPRQ_EN,
MLX5_RX_MPRQ_LOG_STRIDE_NUM,
MLX5_TXQ_MPW_EN,
MLX5_TXQ_MPW_HDR_DSEG_EN,
MLX5_TXQ_MAX_INLINE_LEN,
- MLX5_TX_DB_NC,
- MLX5_TX_PP,
- MLX5_TX_SKEW,
MLX5_TX_VEC_EN,
MLX5_RX_VEC_EN,
- MLX5_L3_VXLAN_EN,
- MLX5_VF_NL_EN,
- MLX5_DV_ESW_EN,
- MLX5_DV_FLOW_EN,
- MLX5_DV_XMETA_EN,
- MLX5_LACP_BY_USER,
- MLX5_MR_EXT_MEMSEG_EN,
MLX5_REPRESENTOR,
MLX5_MAX_DUMP_FILES_NUM,
MLX5_LRO_TIMEOUT_USEC,
- MLX5_CLASS_ARG_NAME,
MLX5_HP_BUF_SIZE,
- MLX5_RECLAIM_MEM,
+ MLX5_DELAY_DROP,
NULL,
};
- struct rte_kvargs *kvlist;
int ret = 0;
- int i;
- if (devargs == NULL)
- return 0;
- /* Following UGLY cast is done to pass checkpatch. */
- kvlist = rte_kvargs_parse(devargs->args, params);
- if (kvlist == NULL) {
- rte_errno = EINVAL;
- return -rte_errno;
- }
- /* Process parameters. */
- for (i = 0; (params[i] != NULL); ++i) {
- if (rte_kvargs_count(kvlist, params[i])) {
- ret = rte_kvargs_process(kvlist, params[i],
- mlx5_args_check, config);
- if (ret) {
- rte_errno = EINVAL;
- rte_kvargs_free(kvlist);
- return -rte_errno;
- }
+ /* Default configuration. */
+ memset(config, 0, sizeof(*config));
+ config->mps = MLX5_ARG_UNSET;
+ config->cqe_comp = 1;
+ config->rx_vec_en = 1;
+ config->txq_inline_max = MLX5_ARG_UNSET;
+ config->txq_inline_min = MLX5_ARG_UNSET;
+ config->txq_inline_mpw = MLX5_ARG_UNSET;
+ config->txqs_inline = MLX5_ARG_UNSET;
+ config->mprq.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN;
+ config->mprq.min_rxqs_num = MLX5_MPRQ_MIN_RXQS;
+ config->mprq.log_stride_num = MLX5_MPRQ_DEFAULT_LOG_STRIDE_NUM;
+ config->log_hp_size = MLX5_ARG_UNSET;
+ config->std_delay_drop = 0;
+ config->hp_delay_drop = 0;
+ if (mkvlist != NULL) {
+ /* Process parameters. */
+ ret = mlx5_kvargs_process(mkvlist, params,
+ mlx5_port_args_check_handler, config);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to process port arguments: %s",
+ strerror(rte_errno));
+ return -rte_errno;
}
}
- rte_kvargs_free(kvlist);
+ /* Adjust parameters according to device capabilities. */
+ if (config->hw_padding && !dev_cap->hw_padding) {
+ DRV_LOG(DEBUG, "Rx end alignment padding isn't supported.");
+ config->hw_padding = 0;
+ } else if (config->hw_padding) {
+ DRV_LOG(DEBUG, "Rx end alignment padding is enabled.");
+ }
+ /*
+ * MPW is disabled by default, while the Enhanced MPW is enabled
+ * by default.
+ */
+ if (config->mps == MLX5_ARG_UNSET)
+ config->mps = (dev_cap->mps == MLX5_MPW_ENHANCED) ?
+ MLX5_MPW_ENHANCED : MLX5_MPW_DISABLED;
+ else
+ config->mps = config->mps ? dev_cap->mps : MLX5_MPW_DISABLED;
+ DRV_LOG(INFO, "%sMPS is %s",
+ config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
+ config->mps == MLX5_MPW ? "legacy " : "",
+ config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
+ /* LRO is supported only when DV flow enabled. */
+ if (dev_cap->lro_supported && !priv->sh->config.dv_flow_en)
+ dev_cap->lro_supported = 0;
+ if (dev_cap->lro_supported) {
+ /*
+ * If LRO timeout is not configured by application,
+ * use the minimal supported value.
+ */
+ if (!config->lro_timeout)
+ config->lro_timeout =
+ hca_attr->lro_timer_supported_periods[0];
+ DRV_LOG(DEBUG, "LRO session timeout set to %d usec.",
+ config->lro_timeout);
+ }
+ if (config->cqe_comp && !dev_cap->cqe_comp) {
+ DRV_LOG(WARNING, "Rx CQE 128B compression is not supported.");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_FTAG_STRIDX &&
+ (!devx || !hca_attr->mini_cqe_resp_flow_tag)) {
+ DRV_LOG(WARNING,
+ "Flow Tag CQE compression format isn't supported.");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_L34H_STRIDX &&
+ (!devx || !hca_attr->mini_cqe_resp_l3_l4_tag)) {
+ DRV_LOG(WARNING,
+ "L3/L4 Header CQE compression format isn't supported.");
+ config->cqe_comp = 0;
+ }
+ DRV_LOG(DEBUG, "Rx CQE compression is %ssupported.",
+ config->cqe_comp ? "" : "not ");
+ if ((config->std_delay_drop || config->hp_delay_drop) &&
+ !dev_cap->rq_delay_drop_en) {
+ config->std_delay_drop = 0;
+ config->hp_delay_drop = 0;
+ DRV_LOG(WARNING, "dev_port-%u: Rxq delay drop isn't supported.",
+ priv->dev_port);
+ }
+ if (config->mprq.enabled && !priv->sh->dev_cap.mprq.enabled) {
+ DRV_LOG(WARNING, "Multi-Packet RQ isn't supported.");
+ config->mprq.enabled = 0;
+ }
+ if (config->max_dump_files_num == 0)
+ config->max_dump_files_num = 128;
+ /* Detect minimal data bytes to inline. */
+ mlx5_set_min_inline(priv);
+ DRV_LOG(DEBUG, "VLAN insertion in WQE is %ssupported.",
+ config->hw_vlan_insert ? "" : "not ");
+ DRV_LOG(DEBUG, "\"rxq_pkt_pad_en\" is %u.", config->hw_padding);
+ DRV_LOG(DEBUG, "\"rxq_cqe_comp_en\" is %u.", config->cqe_comp);
+ DRV_LOG(DEBUG, "\"cqe_comp_fmt\" is %u.", config->cqe_comp_fmt);
+ DRV_LOG(DEBUG, "\"rx_vec_en\" is %u.", config->rx_vec_en);
+ DRV_LOG(DEBUG, "Standard \"delay_drop\" is %u.",
+ config->std_delay_drop);
+ DRV_LOG(DEBUG, "Hairpin \"delay_drop\" is %u.", config->hp_delay_drop);
+ DRV_LOG(DEBUG, "\"max_dump_files_num\" is %u.",
+ config->max_dump_files_num);
+ DRV_LOG(DEBUG, "\"log_hp_size\" is %u.", config->log_hp_size);
+ DRV_LOG(DEBUG, "\"mprq_en\" is %u.", config->mprq.enabled);
+ DRV_LOG(DEBUG, "\"mprq_log_stride_num\" is %u.",
+ config->mprq.log_stride_num);
+ DRV_LOG(DEBUG, "\"mprq_log_stride_size\" is %u.",
+ config->mprq.log_stride_size);
+ DRV_LOG(DEBUG, "\"mprq_max_memcpy_len\" is %u.",
+ config->mprq.max_memcpy_len);
+ DRV_LOG(DEBUG, "\"rxqs_min_mprq\" is %u.", config->mprq.min_rxqs_num);
+ DRV_LOG(DEBUG, "\"lro_timeout_usec\" is %u.", config->lro_timeout);
+ DRV_LOG(DEBUG, "\"txq_mpw_en\" is %d.", config->mps);
+ DRV_LOG(DEBUG, "\"txqs_min_inline\" is %d.", config->txqs_inline);
+ DRV_LOG(DEBUG, "\"txq_inline_min\" is %d.", config->txq_inline_min);
+ DRV_LOG(DEBUG, "\"txq_inline_max\" is %d.", config->txq_inline_max);
+ DRV_LOG(DEBUG, "\"txq_inline_mpw\" is %d.", config->txq_inline_mpw);
+ return 0;
+}
+
+/**
+ * Print the key for device argument.
+ *
+ * It is "dummy" handler whose whole purpose is to enable using
+ * mlx5_kvargs_process() function which set devargs as used.
+ *
+ * @param key
+ * Key argument.
+ * @param val
+ * Value associated with key, unused.
+ * @param opaque
+ * Unused, can be NULL.
+ *
+ * @return
+ * 0 on success, function cannot fail.
+ */
+static int
+mlx5_dummy_handler(const char *key, const char *val, void *opaque)
+{
+ DRV_LOG(DEBUG, "\tKey: \"%s\" is set as used.", key);
+ RTE_SET_USED(opaque);
+ RTE_SET_USED(val);
return 0;
}
/**
- * PMD global initialization.
+ * Set requested devargs as used when device is already spawned.
+ *
+ * It is necessary since it is valid to ask probe again for existing device,
+ * if its devargs don't assign as used, mlx5_kvargs_validate() will fail.
+ *
+ * @param name
+ * Name of the existing device.
+ * @param port_id
+ * Port identifier of the device.
+ * @param mkvlist
+ * Pointer to mlx5 kvargs control to sign as used.
+ */
+void
+mlx5_port_args_set_used(const char *name, uint16_t port_id,
+ struct mlx5_kvargs_ctrl *mkvlist)
+{
+ const char **params = (const char *[]){
+ MLX5_RXQ_CQE_COMP_EN,
+ MLX5_RXQ_PKT_PAD_EN,
+ MLX5_RX_MPRQ_EN,
+ MLX5_RX_MPRQ_LOG_STRIDE_NUM,
+ MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
+ MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
+ MLX5_RXQS_MIN_MPRQ,
+ MLX5_TXQ_INLINE,
+ MLX5_TXQ_INLINE_MIN,
+ MLX5_TXQ_INLINE_MAX,
+ MLX5_TXQ_INLINE_MPW,
+ MLX5_TXQS_MIN_INLINE,
+ MLX5_TXQS_MAX_VEC,
+ MLX5_TXQ_MPW_EN,
+ MLX5_TXQ_MPW_HDR_DSEG_EN,
+ MLX5_TXQ_MAX_INLINE_LEN,
+ MLX5_TX_VEC_EN,
+ MLX5_RX_VEC_EN,
+ MLX5_REPRESENTOR,
+ MLX5_MAX_DUMP_FILES_NUM,
+ MLX5_LRO_TIMEOUT_USEC,
+ MLX5_HP_BUF_SIZE,
+ MLX5_DELAY_DROP,
+ NULL,
+ };
+
+ /* Secondary process should not handle devargs. */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return;
+ MLX5_ASSERT(mkvlist != NULL);
+ DRV_LOG(DEBUG, "Ethernet device \"%s\" for port %u "
+ "already exists, set devargs as used:", name, port_id);
+ /* This function cannot fail with this handler. */
+ mlx5_kvargs_process(mkvlist, params, mlx5_dummy_handler, NULL);
+}
+
+/**
+ * Check sibling device configurations when probing again.
*
- * Independent from individual device, this function initializes global
- * per-PMD data structures distinguishing primary and secondary processes.
- * Hence, each initialization is called once per a process.
+ * Sibling devices sharing infiniband device context should have compatible
+ * configurations. This regards representors and bonding device.
+ *
+ * @param cdev
+ * Pointer to mlx5 device structure.
+ * @param mkvlist
+ * Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-mlx5_init_once(void)
+mlx5_probe_again_args_validate(struct mlx5_common_device *cdev,
+ struct mlx5_kvargs_ctrl *mkvlist)
{
- struct mlx5_shared_data *sd;
- struct mlx5_local_data *ld = &mlx5_local_data;
- int ret = 0;
+ struct mlx5_dev_ctx_shared *sh = NULL;
+ struct mlx5_sh_config *config;
+ int ret;
- if (mlx5_init_shared_data())
- return -rte_errno;
- sd = mlx5_shared_data;
- MLX5_ASSERT(sd);
- rte_spinlock_lock(&sd->lock);
- switch (rte_eal_process_type()) {
- case RTE_PROC_PRIMARY:
- if (sd->init_done)
- break;
- LIST_INIT(&sd->mem_event_cb_list);
- rte_rwlock_init(&sd->mem_event_rwlock);
- rte_mem_event_callback_register("MLX5_MEM_EVENT_CB",
- mlx5_mr_mem_event_cb, NULL);
- ret = mlx5_mp_init_primary(MLX5_MP_NAME,
- mlx5_mp_primary_handle);
- if (ret)
- goto out;
- sd->init_done = true;
- break;
- case RTE_PROC_SECONDARY:
- if (ld->init_done)
+ /* Secondary process should not handle devargs. */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+ pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
+ /* Search for IB context by common device pointer. */
+ LIST_FOREACH(sh, &mlx5_dev_ctx_list, next)
+ if (sh->cdev == cdev)
break;
- ret = mlx5_mp_init_secondary(MLX5_MP_NAME,
- mlx5_mp_secondary_handle);
- if (ret)
- goto out;
- ++sd->secondary_cnt;
- ld->init_done = true;
- break;
- default:
- break;
+ pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
+ /* There is sh for this device -> it isn't probe again. */
+ if (sh == NULL)
+ return 0;
+ config = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
+ sizeof(struct mlx5_sh_config),
+ RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
+ if (config == NULL) {
+ rte_errno = -ENOMEM;
+ return -rte_errno;
+ }
+ /*
+ * Creates a temporary IB context configure structure according to new
+ * devargs attached in probing again.
+ */
+ ret = mlx5_shared_dev_ctx_args_config(sh, mkvlist, config);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to process device configure: %s",
+ strerror(rte_errno));
+ mlx5_free(config);
+ return ret;
+ }
+ /*
+ * Checks the match between the temporary structure and the existing
+ * IB context structure.
+ */
+ if (sh->config.dv_flow_en ^ config->dv_flow_en) {
+ DRV_LOG(ERR, "\"dv_flow_en\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if ((sh->config.dv_xmeta_en ^ config->dv_xmeta_en) ||
+ (sh->config.dv_miss_info ^ config->dv_miss_info)) {
+ DRV_LOG(ERR, "\"dv_xmeta_en\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if (sh->config.dv_esw_en ^ config->dv_esw_en) {
+ DRV_LOG(ERR, "\"dv_esw_en\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if (sh->config.reclaim_mode ^ config->reclaim_mode) {
+ DRV_LOG(ERR, "\"reclaim_mode\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if (sh->config.allow_duplicate_pattern ^
+ config->allow_duplicate_pattern) {
+ DRV_LOG(ERR, "\"allow_duplicate_pattern\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if (sh->config.l3_vxlan_en ^ config->l3_vxlan_en) {
+ DRV_LOG(ERR, "\"l3_vxlan_en\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if (sh->config.decap_en ^ config->decap_en) {
+ DRV_LOG(ERR, "\"decap_en\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if (sh->config.lacp_by_user ^ config->lacp_by_user) {
+ DRV_LOG(ERR, "\"lacp_by_user\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if (sh->config.tx_pp ^ config->tx_pp) {
+ DRV_LOG(ERR, "\"tx_pp\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
+ }
+ if (sh->config.tx_skew ^ config->tx_skew) {
+ DRV_LOG(ERR, "\"tx_skew\" "
+ "configuration mismatch for shared %s context.",
+ sh->ibdev_name);
+ goto error;
}
-out:
- rte_spinlock_unlock(&sd->lock);
- return ret;
+ mlx5_free(config);
+ return 0;
+error:
+ mlx5_free(config);
+ rte_errno = EINVAL;
+ return -rte_errno;
}
/**
* - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4 Lx
* and none (0 bytes) for other NICs
*
- * @param spawn
- * Verbs device parameters (name, port, switch_info) to spawn.
- * @param config
- * Device configuration parameters.
+ * @param priv
+ * Pointer to the private device data structure.
*/
void
-mlx5_set_min_inline(struct mlx5_dev_spawn_data *spawn,
- struct mlx5_dev_config *config)
+mlx5_set_min_inline(struct mlx5_priv *priv)
{
+ struct mlx5_hca_attr *hca_attr = &priv->sh->cdev->config.hca_attr;
+ struct mlx5_port_config *config = &priv->config;
+
if (config->txq_inline_min != MLX5_ARG_UNSET) {
/* Application defines size of inlined data explicitly. */
- switch (spawn->pci_dev->id.device_id) {
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
- if (config->txq_inline_min <
- (int)MLX5_INLINE_HSIZE_L2) {
- DRV_LOG(DEBUG,
- "txq_inline_mix aligned to minimal"
- " ConnectX-4 required value %d",
- (int)MLX5_INLINE_HSIZE_L2);
- config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ if (priv->pci_dev != NULL) {
+ switch (priv->pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ if (config->txq_inline_min <
+ (int)MLX5_INLINE_HSIZE_L2) {
+ DRV_LOG(DEBUG,
+ "txq_inline_mix aligned to minimal ConnectX-4 required value %d",
+ (int)MLX5_INLINE_HSIZE_L2);
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L2;
+ }
+ break;
}
- break;
}
goto exit;
}
- if (config->hca_attr.eth_net_offloads) {
+ if (hca_attr->eth_net_offloads) {
/* We have DevX enabled, inline mode queried successfully. */
- switch (config->hca_attr.wqe_inline_mode) {
+ switch (hca_attr->wqe_inline_mode) {
case MLX5_CAP_INLINE_MODE_L2:
/* outer L2 header must be inlined. */
config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
/* No inline data are required by NIC. */
config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
config->hw_vlan_insert =
- config->hca_attr.wqe_vlan_insert;
+ hca_attr->wqe_vlan_insert;
DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
goto exit;
case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
/* inline mode is defined by NIC vport context. */
- if (!config->hca_attr.eth_virt)
+ if (!hca_attr->eth_virt)
break;
- switch (config->hca_attr.vport_inline_mode) {
+ switch (hca_attr->vport_inline_mode) {
case MLX5_INLINE_MODE_NONE:
config->txq_inline_min =
MLX5_INLINE_HSIZE_NONE;
}
}
}
+ if (priv->pci_dev == NULL) {
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ goto exit;
+ }
/*
* We get here if we are unable to deduce
* inline data size with DevX. Try PCI ID
* to determine old NICs.
*/
- switch (spawn->pci_dev->id.device_id) {
+ switch (priv->pci_dev->id.device_id) {
case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
uint32_t meta, mark, reg_c0;
reg_c0 = ~priv->vport_meta_mask;
- switch (priv->config.dv_xmeta_en) {
+ switch (sh->config.dv_xmeta_en) {
case MLX5_XMETA_MODE_LEGACY:
meta = UINT32_MAX;
mark = MLX5_FLOW_MARK_MASK;
break;
}
if (sh->dv_mark_mask && sh->dv_mark_mask != mark)
- DRV_LOG(WARNING, "metadata MARK mask mismatche %08X:%08X",
+ DRV_LOG(WARNING, "metadata MARK mask mismatch %08X:%08X",
sh->dv_mark_mask, mark);
else
sh->dv_mark_mask = mark;
if (sh->dv_meta_mask && sh->dv_meta_mask != meta)
- DRV_LOG(WARNING, "metadata META mask mismatche %08X:%08X",
+ DRV_LOG(WARNING, "metadata META mask mismatch %08X:%08X",
sh->dv_meta_mask, meta);
else
sh->dv_meta_mask = meta;
if (sh->dv_regc0_mask && sh->dv_regc0_mask != reg_c0)
- DRV_LOG(WARNING, "metadata reg_c0 mask mismatche %08X:%08X",
+ DRV_LOG(WARNING, "metadata reg_c0 mask mismatch %08X:%08X",
sh->dv_meta_mask, reg_c0);
else
sh->dv_regc0_mask = reg_c0;
- DRV_LOG(DEBUG, "metadata mode %u", priv->config.dv_xmeta_en);
+ DRV_LOG(DEBUG, "metadata mode %u", sh->config.dv_xmeta_en);
DRV_LOG(DEBUG, "metadata MARK mask %08X", sh->dv_mark_mask);
DRV_LOG(DEBUG, "metadata META mask %08X", sh->dv_meta_mask);
DRV_LOG(DEBUG, "metadata reg_c0 mask %08X", sh->dv_regc0_mask);
return RTE_DIM(dynf_names);
}
-/**
- * Comparison callback to sort device data.
- *
- * This is meant to be used with qsort().
- *
- * @param a[in]
- * Pointer to pointer to first data object.
- * @param b[in]
- * Pointer to pointer to second data object.
- *
- * @return
- * 0 if both objects are equal, less than 0 if the first argument is less
- * than the second, greater than 0 otherwise.
- */
-int
-mlx5_dev_check_sibling_config(struct mlx5_priv *priv,
- struct mlx5_dev_config *config)
-{
- struct mlx5_dev_ctx_shared *sh = priv->sh;
- struct mlx5_dev_config *sh_conf = NULL;
- uint16_t port_id;
-
- MLX5_ASSERT(sh);
- /* Nothing to compare for the single/first device. */
- if (sh->refcnt == 1)
- return 0;
- /* Find the device with shared context. */
- MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
- struct mlx5_priv *opriv =
- rte_eth_devices[port_id].data->dev_private;
-
- if (opriv && opriv != priv && opriv->sh == sh) {
- sh_conf = &opriv->config;
- break;
- }
- }
- if (!sh_conf)
- return 0;
- if (sh_conf->dv_flow_en ^ config->dv_flow_en) {
- DRV_LOG(ERR, "\"dv_flow_en\" configuration mismatch"
- " for shared %s context", sh->ibdev_name);
- rte_errno = EINVAL;
- return rte_errno;
- }
- if (sh_conf->dv_xmeta_en ^ config->dv_xmeta_en) {
- DRV_LOG(ERR, "\"dv_xmeta_en\" configuration mismatch"
- " for shared %s context", sh->ibdev_name);
- rte_errno = EINVAL;
- return rte_errno;
- }
- return 0;
-}
-
/**
* Look for the ethernet device belonging to mlx5 driver.
*
* @param[in] port_id
* port_id to start looking for device.
- * @param[in] pci_dev
- * Pointer to the hint PCI device. When device is being probed
+ * @param[in] odev
+ * Pointer to the hint device. When device is being probed
* the its siblings (master and preceding representors might
* not have assigned driver yet (because the mlx5_os_pci_probe()
- * is not completed yet, for this case match on hint PCI
+ * is not completed yet, for this case match on hint
* device may be used to detect sibling device.
*
* @return
* port_id of found device, RTE_MAX_ETHPORT if not found.
*/
uint16_t
-mlx5_eth_find_next(uint16_t port_id, struct rte_pci_device *pci_dev)
+mlx5_eth_find_next(uint16_t port_id, struct rte_device *odev)
{
while (port_id < RTE_MAX_ETHPORTS) {
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
if (dev->state != RTE_ETH_DEV_UNUSED &&
dev->device &&
- (dev->device == &pci_dev->device ||
+ (dev->device == odev ||
(dev->device->driver &&
dev->device->driver->name &&
- !strcmp(dev->device->driver->name, MLX5_DRIVER_NAME))))
+ ((strcmp(dev->device->driver->name,
+ MLX5_PCI_DRIVER_NAME) == 0) ||
+ (strcmp(dev->device->driver->name,
+ MLX5_AUXILIARY_DRIVER_NAME) == 0)))))
break;
port_id++;
}
}
/**
- * DPDK callback to remove a PCI device.
+ * Callback to remove a device.
*
- * This function removes all Ethernet devices belong to a given PCI device.
+ * This function removes all Ethernet devices belong to a given device.
*
- * @param[in] pci_dev
- * Pointer to the PCI device.
+ * @param[in] cdev
+ * Pointer to the generic device.
*
* @return
* 0 on success, the function cannot fail.
*/
-static int
-mlx5_pci_remove(struct rte_pci_device *pci_dev)
+int
+mlx5_net_remove(struct mlx5_common_device *cdev)
{
uint16_t port_id;
+ int ret = 0;
- RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device) {
+ RTE_ETH_FOREACH_DEV_OF(port_id, cdev->dev) {
/*
* mlx5_dev_close() is not registered to secondary process,
* call the close function explicitly for secondary process.
*/
if (rte_eal_process_type() == RTE_PROC_SECONDARY)
- mlx5_dev_close(&rte_eth_devices[port_id]);
+ ret |= mlx5_dev_close(&rte_eth_devices[port_id]);
else
- rte_eth_dev_close(port_id);
+ ret |= rte_eth_dev_close(port_id);
}
- return 0;
+ return ret == 0 ? 0 : -EIO;
}
static const struct rte_pci_id mlx5_pci_id_map[] = {
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
- PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
+ PCI_DEVICE_ID_MELLANOX_CONNECTXVF)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX6LX)
},
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX7)
+ },
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX7BF)
+ },
{
.vendor_id = 0
}
};
-struct rte_pci_driver mlx5_driver = {
- .driver = {
- .name = MLX5_DRIVER_NAME
- },
+static struct mlx5_class_driver mlx5_net_driver = {
+ .drv_class = MLX5_CLASS_ETH,
+ .name = RTE_STR(MLX5_ETH_DRIVER_NAME),
.id_table = mlx5_pci_id_map,
- .probe = mlx5_os_pci_probe,
- .remove = mlx5_pci_remove,
- .dma_map = mlx5_dma_map,
- .dma_unmap = mlx5_dma_unmap,
- .drv_flags = PCI_DRV_FLAGS,
+ .probe = mlx5_os_net_probe,
+ .remove = mlx5_net_remove,
+ .probe_again = 1,
+ .intr_lsc = 1,
+ .intr_rmv = 1,
};
/* Initialize driver log type. */
-RTE_LOG_REGISTER(mlx5_logtype, pmd.net.mlx5, NOTICE)
+RTE_LOG_REGISTER_DEFAULT(mlx5_logtype, NOTICE)
/**
* Driver initialization routine.
*/
RTE_INIT(rte_mlx5_pmd_init)
{
+ pthread_mutex_init(&mlx5_dev_ctx_list_mutex, NULL);
+ mlx5_common_init();
/* Build the static tables for Verbs conversion. */
mlx5_set_ptype_table();
mlx5_set_cksum_table();
mlx5_set_swp_types_table();
if (mlx5_glue)
- rte_pci_register(&mlx5_driver);
+ mlx5_class_driver_register(&mlx5_net_driver);
}
-RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
-RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map);
-RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");
+RTE_PMD_EXPORT_NAME(MLX5_ETH_DRIVER_NAME, __COUNTER__);
+RTE_PMD_REGISTER_PCI_TABLE(MLX5_ETH_DRIVER_NAME, mlx5_pci_id_map);
+RTE_PMD_REGISTER_KMOD_DEP(MLX5_ETH_DRIVER_NAME, "* ib_uverbs & mlx5_core & mlx5_ib");