#pragma GCC diagnostic error "-Wpedantic"
#endif
-/* DPDK headers don't like -pedantic. */
-#ifdef PEDANTIC
-#pragma GCC diagnostic ignored "-Wpedantic"
-#endif
#include <rte_malloc.h>
#include <rte_ethdev.h>
#include <rte_ethdev_pci.h>
#include <rte_pci.h>
#include <rte_common.h>
#include <rte_kvargs.h>
-#ifdef PEDANTIC
-#pragma GCC diagnostic error "-Wpedantic"
-#endif
#include "mlx5.h"
#include "mlx5_utils.h"
/* Device parameter to enable hardware TSO offload. */
#define MLX5_TSO "tso"
+/* Device parameter to enable hardware Tx vector. */
+#define MLX5_TX_VEC_EN "tx_vec_en"
+
+/* Device parameter to enable hardware Rx vector. */
+#define MLX5_RX_VEC_EN "rx_vec_en"
+
/* Default PMD specific parameter value. */
#define MLX5_ARG_UNSET (-1)
int mpw_hdr_dseg;
int inline_max_packet_sz;
int tso;
+ int tx_vec_en;
+ int rx_vec_en;
};
/**
* Retrieve integer value from environment variable.
args->inline_max_packet_sz = tmp;
} else if (strcmp(MLX5_TSO, key) == 0) {
args->tso = !!tmp;
+ } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
+ args->tx_vec_en = !!tmp;
+ } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
+ args->rx_vec_en = !!tmp;
} else {
WARN("%s: unknown parameter", key);
return -EINVAL;
MLX5_TXQ_MPW_HDR_DSEG_EN,
MLX5_TXQ_MAX_INLINE_LEN,
MLX5_TSO,
+ MLX5_TX_VEC_EN,
+ MLX5_RX_VEC_EN,
NULL,
};
struct rte_kvargs *kvlist;
priv->inline_max_packet_sz = args->inline_max_packet_sz;
if (args->tso != MLX5_ARG_UNSET)
priv->tso = args->tso;
+ if (args->tx_vec_en != MLX5_ARG_UNSET)
+ priv->tx_vec_en = args->tx_vec_en;
+ if (args->rx_vec_en != MLX5_ARG_UNSET)
+ priv->rx_vec_en = args->rx_vec_en;
}
/**
.mpw_hdr_dseg = MLX5_ARG_UNSET,
.inline_max_packet_sz = MLX5_ARG_UNSET,
.tso = MLX5_ARG_UNSET,
+ .tx_vec_en = MLX5_ARG_UNSET,
+ .rx_vec_en = MLX5_ARG_UNSET,
};
exp_device_attr.comp_mask =
DEBUG("using port %u (%08" PRIx32 ")", port, test);
ctx = ibv_open_device(ibv_dev);
- if (ctx == NULL)
+ if (ctx == NULL) {
+ err = ENODEV;
goto port_error;
+ }
/* Check port status. */
err = ibv_query_port(ctx, port, &port_attr);
if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
ERROR("port %d is not configured in Ethernet mode",
port);
+ err = EINVAL;
goto port_error;
}
priv->mps = mps; /* Enable MPW by default if supported. */
priv->cqe_comp = 1; /* Enable compression by default. */
priv->tunnel_en = tunnel_en;
+ /* Enable vector by default if supported. */
+ priv->tx_vec_en = 1;
+ priv->rx_vec_en = 1;
err = mlx5_args(&args, pci_dev->device.devargs);
if (err) {
ERROR("failed to process device arguments: %s",
mlx5_args_assign(priv, &args);
if (ibv_exp_query_device(ctx, &exp_device_attr)) {
ERROR("ibv_exp_query_device() failed");
+ err = ENODEV;
goto port_error;
}
if (priv_get_mac(priv, &mac.addr_bytes)) {
ERROR("cannot get MAC address, is mlx5_en loaded?"
" (errno: %s)", strerror(errno));
+ err = ENODEV;
goto port_error;
}
INFO("port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
err = ENOMEM;
goto port_error;
}
-
- /* Secondary processes have to use local storage for their
- * private data as well as a copy of eth_dev->data, but this
- * pointer must not be modified before burst functions are
- * actually called. */
- if (mlx5_is_secondary()) {
- struct mlx5_secondary_data *sd =
- &mlx5_secondary_data[eth_dev->data->port_id];
- sd->primary_priv = eth_dev->data->dev_private;
- if (sd->primary_priv == NULL) {
- ERROR("no private data for port %u",
- eth_dev->data->port_id);
- err = EINVAL;
- goto port_error;
- }
- sd->shared_dev_data = eth_dev->data;
- rte_spinlock_init(&sd->lock);
- memcpy(sd->data.name, sd->shared_dev_data->name,
- sizeof(sd->data.name));
- sd->data.dev_private = priv;
- sd->data.rx_mbuf_alloc_failed = 0;
- sd->data.mtu = ETHER_MTU;
- sd->data.port_id = sd->shared_dev_data->port_id;
- sd->data.mac_addrs = priv->mac;
- eth_dev->tx_pkt_burst = mlx5_tx_burst_secondary_setup;
- eth_dev->rx_pkt_burst = mlx5_rx_burst_secondary_setup;
- } else {
- eth_dev->data->dev_private = priv;
- eth_dev->data->mac_addrs = priv->mac;
- }
-
+ eth_dev->data->dev_private = priv;
+ eth_dev->data->mac_addrs = priv->mac;
eth_dev->device = &pci_dev->device;
rte_eth_copy_pci_info(eth_dev, pci_dev);
eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
static void
rte_mlx5_pmd_init(void)
{
+ /* Build the static table for ptype conversion. */
+ mlx5_set_ptype_table();
/*
* RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
* huge pages. Calling ibv_fork_init() during init allows
* using this PMD, which is not supported in forked processes.
*/
setenv("RDMAV_HUGEPAGES_SAFE", "1", 1);
+ /* Don't map UAR to WC if BlueFlame is not used.*/
+ setenv("MLX5_SHUT_UP_BF", "1", 1);
ibv_fork_init();
rte_pci_register(&mlx5_driver);
}